AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • Multicopter led Light 50mm Yellow

    Multicopter led Light 50mm Yellow

    Multicopter led Light 50mm, available in yellow
    , size is 50mm long, 12m wide.
    This light has 4 strong SMD led chips, gives you perfect visibility in day time, or during the race. Operating voltage- 5V DC

    SKU: LED50
    €5.50
    inc. VAT

     LOW STOCK
  • Multicopter Lightweight Retractable Landing gear set

    Multicopter Lightweight Retractable Landing gear set

    Produced in Europe, this Retractable landing gear will allow you full turn of 3 axis Gimbal without seen your Landing legs in Flight.

    Exceptional design with Ball  bearings mechanism, with only one servo operation, Full carbon fiber, make this gear set weight less than 330 Grams!: Means it wil not overload your current Drone!

    Operated by 2 X Savox Servos (Not included), with Locking mechanism when in Landing position makes it the most desired part.

    Tested with the weight of 40KG load.

    Completely Flat (when in flight)

    Specification:

    Weight: 350 gr

    • Base plate wideness: 30cm
    • Height : 45 cm (allows large gimbals, can be cut down)
    SKU: RETRACTMR
    €295.00
    inc. VAT

     LOW STOCK
  • Multicopter Slim size ESC 20A OPTO BLHeli Firmware (OneShot125)

    Multicopter Slim size ESC 20A OPTO BLHeli Firmware (OneShot125)

    Slim size esc for small multicopters: 12mm ONLY, with oneshot and damped lightenabled!

    Use new process ultra-low resistance MOSFETs with consideration of size,All flashed N-MOS with high withstanding current;
    Slim design, Mini 20A with high performance capacitor filter onboard, weight reduced to 2g

    Specification:
    Voltage: 6-16.8V(2-4S LiPo)
    Output Current: 20A
    BEC: Without
    Output PWM frequency:18KHz
    Firmware:BLHeli 13.2
    Weight:2.0g(without wires)
    Size:23*12*4.5mm

    SKU: BLH20A
    €17.00
    inc. VAT

     IN STOCK
  • MultiRotor wood prop set 15x5.5

    MultiRotor wood prop set 15x5.5

    Multi rotor ( QUAD) Wood 15x5.5 Propeller Set  1 x CW and 1 x CCW

    Multicopter prop from Avizar produces some of the finest props for Multirotor use, and the new Wood Series props offers a wide selection a sizes that are specifically for use in hovering flight applications. All of the various size wood Multirotor props included are in both normal and reverse rotation. The blades on these props feature an elliptic blade shape that produces a more uniform thrust distribution across the entire blade surface for maximum lift and thrust efficiency.

    The 15x5.5 props have a 8mm diameter center hole, and including an adapter to fit 6mm shaft .
    Wood props are the most lightweight props and best used for best response on drones.

    Included:

      Set of 2 props: 1 x CW and 1 x CCW
      2 bushings 6/8mm

    SKU: MRPROP1555
    €24.00
    inc. VAT

     IN STOCK
  • MultiRotor wood prop set 16X4.5

    MultiRotor wood prop set 16X4.5

    Multi rotor ( QUAD) Wood 16x4.5  Propeller Set  1 x CW and 1 x CCW

    Multicopter prop from Avizar produces some of the finest props for Multirotor use, and the new Wood Series props offers a wide selection a sizes that are specifically for use in hovering flight applications. All of the various size wood Multirotor props included are in both normal and reverse rotation. The blades on these props feature an elliptic blade shape that produces a more uniform thrust distribution across the entire blade surface for maximum lift and thrust efficiency.

    The 16X4.5 props have a 8mm diameter center hole, and including an adapter to fit 6mm shaft .
    Wood props are the most lightweight props and best used for best response on drones.

    Included:

      Set of 2 props: 1 x CW and 1 x CCW
      2 bushings 6/8mm

    SKU: MRPROP1645
    €25.00
    inc. VAT

     72HR STOCK
  • MultiRotor wood prop set 18X5

    MultiRotor wood prop set 18X5

    Multi rotor ( QUAD) Wood 18X5  Propeller Set  1 x CW and 1 x CCW

    Multicopter prop from Avizar produces some of the finest props for Multirotor use, and the new Wood Series props offers a wide selection a sizes that are specifically for use in hovering flight applications. All of the various size wood Multirotor props included are in both normal and reverse rotation. The blades on these props feature an elliptic blade shape that produces a more uniform thrust distribution across the entire blade surface for maximum lift and thrust efficiency.

    The 18X5 props have a 8mm diameter center hole, and including an adapter to fit 6mm shaft .
    Wood props are the most lightweight props and best used for best response on drones.

    Included:

      Set of 2 props: 1 x CW and 1 x CCW
      2 bushings 6/8mm

    SKU: MRPROP1850
    €45.00
    inc. VAT

     IN STOCK
  • Nylock Nuts M2 (10 pcs)

    Nylock Nuts M2 (10 pcs)

    Self locking nuts, with plastic safe layer, vibration proof , Pack of 10

    SKU: RCM20420
    €3.00
    inc. VAT

     IN STOCK
  • Nylock Nuts M2.5 (10 pcs)

    Nylock Nuts M2.5 (10 pcs)

    Self locking nuts, M2.5 with plastic safe layer, vibration proof , Pack of 10

    SKU: RCCS-019
    €3.50
    inc. VAT

     IN STOCK
  • Nylock Nuts M4 (10 pcs)

    Nylock Nuts M4 (10 pcs)

    Self locking nuts, with plastic safe layer, vibration proof , Pack of 10

    SKU: RCCS-017
    €4.00
    inc. VAT

     IN STOCK
  • Nylock Nuts M5 (Set of 10pcs)

    Nylock Nuts M5 (Set of 10pcs)

    Self locking nuts M5, with plastic safe layer, vibration proof , Pack of 10

    SKU: RCCS-018
    €4.00
    inc. VAT

     IN STOCK
  • Nylon Pinned Hinges 20x36

    Nylon Pinned Hinges 20x36

    Nylon & Plane pinned Hinges L20×W36mm

    Set of 10pcs

    SKU: AV008-00202
    €3.00
    inc. VAT

     IN STOCK
  • Nylon Screws - Pan Head Phillips M3x25 (10pcs)

    Nylon Screws - Pan Head Phillips M3x25 (10pcs)

    Nylon Screws - Pan Head Phillips M3x25

    Set of 10 Screws.

    SKU: NHP3x25
    €3.00
    inc. VAT

     IN STOCK
  • Nylon Screws - Pan Head Phillips M4x34

    Nylon Screws - Pan Head Phillips M4x34

    Nylon Screws - Pan Head Phillips M4x34

    Set of 10 Screws.

    SKU: NHC4x34
    €3.00
    inc. VAT

     LOW STOCK
  • Nylon Screws - Pan Head Phillips M4x45

    Nylon Screws - Pan Head Phillips M4x45

    Nylon Screws - Pan Head Phillips M4x45

    Set of 10 Screws.

    SKU: NHC4x45
    €5.00
    inc. VAT

     IN STOCK
  • Nylon thumb screws plastic screw bolt M4x30

    Nylon thumb screws plastic screw bolt M4x30

    Nylon thumb screws plastic screw bolt M4x30

    Set of 10 Screws.

    SKU: NHT4x30
    €4.00
    inc. VAT

     IN STOCK
  • Octocopter 1100mm size Frame

    Octocopter 1100mm size Frame

    This classic octocopter frame  is the part of our new professional products line , which was designed and tested . It`s made from extra strong carbon fiber plates and tubes,using patented technologies and equipment.
    It`s build to provide very smooth and stable flight with up 4.5kg payloads .
    This frame is foldable- comfortable for transportation . You`ll be need to release 20pcs of wing nuts to fold the motor arms and landing gears to put your machine into the storage place.
    Two li-po shelves  allow the use of two LiPos to increase flying time and easy replacement within seconds..
    The protection cage will keep the copter`s electronic equipment in cases of over flips or problematic situations.
    Camera mount adapter plate is  specialy designed to reduce vibrations on camera . It`s compatible with most today camera mounts
    The holes to mount the MikroKopter electronics are already foreseen on the center-plate, as the ones necessary for the distribution board  with the speed controllers.  
    This kit includes a large foldable landing gear (300mm of clearance).
    This frame  is delivered partially assembled, so building is faster and easier.

    Diameter of the frame-1100mm
    Weight of the frame with landing gears, protection cage and camera mount adaptor plate – 1470gr.

     

    SKU: X8-1100
    €869.00
    inc. VAT

     72HR STOCK
  • Parallel (5X) Walkera 1S charging extension

    Parallel (5X) Walkera 1S charging extension

    The parallel charge leads allow you to extend charge up to six battery packs simultaneously. Charging extension Cable for 5pcs walkera, Hubsan 1s Lipo
    Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to 5 of your 1S battery packs. Connect to your batteries with the connectors, as used in the walkera, Hubsan  1s lipos.. extension of 30cm, with Walkera Female 1s connector at the end.

    SKU: AV1322walkext
    €5.00
    inc. VAT

     IN STOCK
  • Parallel (6X) Pico 1s charging cable

    Parallel (6X) Pico 1s charging cable

    The parallel charge leads allow you to charge up to six battery packs simultaneously.Charging Cable for 6pcs MCX,MSR,MSRX,NANO CPX 1s Lipo
    Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to 6 of your 1S battery packs. Connect to your batteries with the connectors, as used in the Nano CPX, MCX and other 1s lipos.. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    SKU: AV1322NCPX
    €8.50
    inc. VAT

     IN STOCK
  • Parallel (6X) Walkera 1s charging cable

    Parallel (6X) Walkera 1s charging cable

    The parallel charge leads allow you to charge up to six battery packs simultaneously.Charging Cable for 6pcs Walkera, Hubsan.. 1s Lipo
    Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to 6 of your 1S battery packs. Connect to your batteries with the connectors, as used in the Walkera, Hubsan 1s lipos.. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    SKU: AV1322Walkera
    €8.50
    inc. VAT

     IN STOCK
  • PDB for Race quads, Nighthawk X-Series

    PDB for Race quads, Nighthawk X-Series

    Built-In 5V and 12V regulators supply ample amount of clean, filtered power to the electronics.
    ESC Signal pads allow clean and efficient builds with less wire.
    Programmable RGB LEDs let user play with endless colours and features through the flight controller using Cleanflight-Configurator.
    XT60 connector is directly mounted onto the PDB (further reducing weight by eliminating heavy wires as well as risk of cutting power leads).
    Dedicated signal pads are aligned with the flight controller to allow clean connections.

    SKU: PDBNH
    €5.90
    inc. VAT

     IN STOCK
    NEW
  • Plain Washers ISO 7089 A2 10x20x2.0mm (10 pcs)

    Plain Washers ISO 7089 A2 10x20x2.0mm (10 pcs)

    Plain Washers ISO 7089 A2 10x20x2.0mm (10 pcs)

    SKU: EF7089210
    €2.50
    inc. VAT

     IN STOCK
  • Plain Washers ISO 7089 A2 10x24x2.5mm (10 pcs)

    Plain Washers ISO 7089 A2 10x24x2.5mm (10 pcs)

    Plain Washers ISO 7089 A2 10x24x2.5mm (10 pcs)

    SKU: EF7089212
    €4.50
    inc. VAT

     IN STOCK
  • Plain Washers ISO 7089 A2 3x7x0.5mm (10 pcs)

    Plain Washers ISO 7089 A2 3x7x0.5mm (10 pcs)

    Plain Washers ISO 7089 A2 3x7x0.5mm (10 pcs)

    SKU: EF7089223
    €1.50
    inc. VAT

     IN STOCK
  • Plain Washers ISO 7089 A2 4x8.5x1.0mm (10 pcs)

    Plain Washers ISO 7089 A2 4x8.5x1.0mm (10 pcs)

    Plain Washers ISO 7089 A2 4x8.5x1.0mm (10 pcs)

    SKU: EF708924
    €2.00
    inc. VAT

     IN STOCK

Manufacturers