AVIZAR

AVIZAR

Producer of Motors, ESC, Accessories , all in High European quality.

Products


  • KingStar 260 FPV - Ultimate Racer frame, 2 frames, Red+Green

    KingStar 260 FPV - Ultimate Racer frame, 2 frames, Red+Green

    Beautifull and yet simple design, attractive in price, appealing look. This is the KINGSTAR 260. This set including 2 frame kits , Grren and Red, together with Leds

    Features:

    1. Polyamide+fibre material, multicolor、strong、light-weight frame.
    2. Standard camera holders, the vertical angle is adjustable.
    3. Anti-vibration holders for MOBIUS type camera.
    4. Power distribution board  with gold PCB made from 1oz copper thickness.
    5. High brightness multicolor rear LED with lampshadehousing
     
    Package included:

    • 2 x Frame set
    • 10 x pairs of 6040 propeller
    • 2 x High brightness LED
    • 1 x Receiver antenna mount

     Specification:

    • Frame distance- 260mm
    • Frame weight 138g

     Recommended Configuration:

    • FC: CC3D\NAZA32\QQ etc..
    • MOTOR:2204-2206
    • ESC:10-20A with BLHeli or SimonK firmware.  
    • PROPELLER:6"
    • BATTERY :1300-2200MHA 11.1V
    •          1000-1800MAH 14.8V

     

    SKU: STAR260GR
    €59.00
    inc. VAT

     LOW STOCK
  • KingStar 260 FPV landing gear 4pcs

    KingStar 260 FPV landing gear 4pcs

    KingStar 260 FPV landing gear 4pcs

    SKU: KSTARGEAR
    €4.00
    inc. VAT

     IN STOCK
  • KingStar 260 FPV Power distribution board

    KingStar 260 FPV Power distribution board

    KingStar 260 FPV Power distribution board
    SKU: KSTARPDV
    €3.00
    inc. VAT

     IN STOCK
  • KK-Mini 2.1.5 Multi-Rotor Flight Control Board with LCD screen

    KK-Mini 2.1.5 Multi-Rotor Flight Control Board with LCD screen

    The next evolution of the rotor revolution is here!! The KK-mini is packing all the same power, but with a new mighty-mini form factor.

    The KK-Mini is the next Big/Small evolution of the first generation KK flight control boards. The KK-Mini is based on the KK2.1.5 architecture and has all the same inputs and outputs as well as the full functionality of its big brother. The new 36mm designed was adapted to fit the needs of the new mini market, but don’t let its size fool you as it's just as much at home in any size multi-rotor. The KK mini still utilizes a built in GUI using a hi-res mini LCD and 4 micro buttons for the same great KK experience. It was engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.

    A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go! All of which is done with easy to follow on screen prompts!

    The original KK gyro system has been updated to an incredibly sensitive 6050 MPU system, making this the most stable KK board ever and allowing for the addition of an auto-level function. At the heart of the KK-Mini is an Atmel Mega644PA 8-bit AVR RISC-based microcontroller with 64k of memory. An additional polarity protected header has been added for voltage detection, so no need for on-board soldering. A handy piezo buzzer is also included for audio warning when activating and deactivating the board.

    The KK-Mini added polarity protection to the voltage sense header and on-board buzzer. The voltage sense line has been updated for better accuracy.

    If you’re new to multi-rotor flight or have been unsure about how to setup a KK board, then the KK-Mini was built for you. The 6 Pin USBasp AVR programming interface ensures future software updates will be quick and easy.

    Specs:

    • Size: 36x36x11.5mm (mounting holes 30.5x30.5mm)
    • Weight: 8.6g
    • IC: Atmega644 PA
    • Gyro/Acc: 6050MPU InvenSense Inc.
    • Auto-level: Yes
    • Input Voltage: 4.8-6.0V
    • AVR interface: standard 6 pin.
    • Signal from Receiver: 1520us (5 channels)
    • Signal to ESC: 1520us
    • LCD size: 24*18mm
    • Mini buttons size:Four 3.3*4.2mm
    • Voltage sensor: One red positive pin header for.
    • Input rail: Single row 2.54mm pitch pin header for input signal
    SKU: KK215MINI
    €26.90
    inc. VAT

     LOW STOCK
  • KK2.1.5 Multi-rotor Flight Control Board With LCD, 6050MPU, Atmel 644PA

    KK2.1.5 Multi-rotor Flight Control Board With LCD, 6050MPU, Atmel 644PA

    The latest revision of this popular flight controller has arrived! Version 2.1.5 has updated sensors, more memory and safety enhancements including polarity protection and better pin labelling.

    The KK 2.1.5 board brings easy multi-rotor flight to beginners and experts alike. The LCD screen and user-friendly software can be fully configured on the board itself instead of having to use a PC based configuration tool. Just select your multi-rotor type and motor layout, calibrate the ESCs and radio and off you go. Just follow the prompts on the LCD screen.

    The board now uses the 6050MPU inertial measurement unit, containing a high precision gyro and accelerometer, so the KK 2.1.5 board now comes with an auto-level function. The Atmel Mega644PA 8-bit AVR RISC-based microcontroller has 64k of memory. The voltage detection header now also features polarity detection. Also included in the package is a piezo buzzer to provide audio feedback and warnings when arming or disarming the board.

    Specifications:

    • Size: 50.5mm x 50.5mm x 12mm
    • Weight: 21 gram (Include Piezo buzzer)
    • IC: Atmega644 PA
    • Gyro/Acc: 6050MPU InvenSense Inc.
    • Auto-level: Yes
    • Input Voltage: 4.8-6.0V
    • AVR interface: standard 6 pin.
    • Signal from Receiver: 1520us (5 channels)
    • Signal to ESC: 1520us

    Features:

    1. Based on the original design, but improved with the convenience to connect to a satellite or S.Bus receiver directly, bypassing the requirement of adapter as normal KK board.
    2. Engineered from the ground up to bring multi-rotor flight to everyone, not just the experts.
    3. The LCD screen and built in software makes install and setup easier than ever.
    4. A host of multi-rotor craft types are pre-installed, simply select your craft type, check motor layout/propeller direction, calibrate your ESCs and radio and you’re ready to go!

    What is a Multi-Rotor Control board you ask?
    The KK2 Multi-Rotor controller is a flight control board for multi-rotor aircraft (Tricopters, Quadcopters, Hexcopters etc). Its purpose is to stabilize the aircraft during flight. To do this it takes the signal from the 6050MPU gyro/acc (roll, pitch and yaw) then passes the signal to the Atmega644PA IC. The Atmega644PA IC unit then processes these signals according the users selected firmware and passes control signals to the installed Electronic Speed Controllers (ESCs). These signals instruct the ESCs to make fine adjustments to the motors rotational speed which in turn stabilizes your multi-rotor craft.
    The KK2 Multi-Rotor control board also uses signals from your radio systems receiver (Rx) and passes these signals to the Atmega644PA IC via the aileron, elevator, throttle and rudder inputs. Once this information has been processed the IC will send varying signals to the ESCs which in turn adjust the rotational speed of each motor to induce controlled flight (up, down, backwards, forwards, left, right, yaw).

    SKU: KK2.1.5
    €27.90
    inc. VAT

  • Landing Gear Foam Protection Set For DJI Phantom RC Quadcopter

    Landing Gear Foam Protection Set For DJI Phantom RC Quadcopter

    Provide protection for DJI Phantom landing gear
    Features:

    • Super light weight less than 0.1G
    • Landing Gear Protective Set
    • Come with inside 3M sticker
    • Dedicated for DJI Phantom RC Quadcopter
    SKU: DJIPHI025
    €4.50
    inc. VAT

     LOW STOCK
  • Large Scale ready to fly Surveilance-Mapping Drone multicopter 6/12 motors

    Large Scale ready to fly Surveilance-Mapping Drone multicopter 6/12 motors

    Custom made Multicopter based on Sky hero Spyder 6 large scale drone with 6 or 12 motors option. These machines are used to pick up heavy weights. The motors can handle extreme redundancy.
    This machine is designed to fly in extreme weather conditions. It is originally made to carry gimbal, however it is very easily converted to carry other objects.
    With 12 motors this machine able to pick up extra weight of around 10-12 KG. If this is not necessary, 6 motors is an option.
    Machine is delivered fully assembled and test flown.

    General specifications

    • 6 Arms Multicopter with 6 or 12 motors configured. Diameter of the machine is 1 meter.
    • Motor type 4014 T-motor or Avizar, with metal motor arms.
    • 6/ 12 esc 50 amps 6s with special software for multicopter use.
    • Propellers 15-16", depends on configuration.
    • Flight controller: DJI Wookong or A2.
    • Gimbal- 3 axes brushless, able to accomodate 99% of Midi SLR- Full SLR  cameras, with autonomous controller(can be used separate as cameraman).
    • Video transmitter - On demand
    • Lipo battery 6s 12000-30000mah
    • FPV camera installed together with the main camera to allow full visibility of live stream on the ground.
    • Radio control- Futaba SG14(as option)

    See the options availaible. The product can be further customised based on your wants and needs.

    SKU: SHBGDR
    €5900.00
    inc. VAT

     LOW STOCK
  • Linear Regulator 4S LiPo to 12V 300mA

    Linear Regulator 4S LiPo to 12V 300mA

    Linear Regulator 4S LiPo to 12V 300mA (1pc)

    • Suitable for FPV Camera
    • Compared with BEC12V, linear voltage regulator with low-ripple, does't interfere the image signal
    • Temp. 25℃, 16V input, 12V output 300mA, 5min, the highest measured temperature is 58℃
    • Can be connected with extra only one 12V 1.5W LED light.
    • If the 3S and 4S mixed, it support 3S battery too. Output voltage=3S voltage-1V, eg. the battery voltage is 12V, actual output is 11V, and the camera can work normally.

    Description:

    • Item Name: Linear Voltage Regulator
    • Input Voltage:13~17V, 4S LiPo
    • Output Voltage: 12V,  accuracy 2.5%
    • Output Current: Continuous 300mA
    • Size: 25*10*3mm
    • Weight: 1g
    SKU: LDO12
    €3.50
    inc. VAT

     IN STOCK
  • Lost Alarm Finder Tracker for RC

    Lost Alarm Finder Tracker for RC

    RC lost Airplane/helicopter/drone  finder Alarm.

    • Connect the alarm between the servo and the receiver, i.e. act as a servo extension cord.
    • Turn on your TX. and you will hear 2 x beep sound.
    • Do not move any of the control stick on the TX or simply turn off the the TX. You will hear a continuous beep sound after 1 minute. It will stop once u turn on your TX or move the control stick.
    • If you ignore the continuous beep sound for around 2minutes, the beep sound will change the a louder V sound.
    • You need to disconnect the alarm from the receiver in order to switch of the alarm.

    Specifications:

    • RC Radio Control  Lost Finder Tracker
    • Suitable Controller: All PPM/FM, PCM/FM, AM Tx/Rx
    • Loud >85dB alarm gets your attention
    • Two alarm tones pattern
    • Works with AM/FM PPM or FM/PCM R/C systems
    • Plugs into any standard servo channel
    • Operating Voltage(v) : 4-6v
    • Current Drain(mA) : 1-35
    • Can be heard in 50 meter distance

    How to set up

    1. 1. Connect the lost alarm between the servo (the one which runs when flying) and the receiver, i.e. act as a servo extension cord
    2. 2. Turn on your transmitter
    3. 3. Turn on your receiver then you will hear two beep sound
    4. 4. To test if it is functioning:
    5. Do not move any of the control stick on the transmitter for 1 min. or simply turn it off
    6. You will hear a continuous beep sound after 1 minute
    7. If you ignore the continuous beep sound for around 2 minutes, the beep sound will change to a louder V sound
    8. It will stop once you move the control stick or power off the receiver
    9. 5. If you cannot find you plane, do not move the control stick or turn off your transmitter for 1 min for the alarm sound
    10. 6. By the tracking sound, you will be able to locate your RC plane / Helicopter
    11. 7. To stop the alarm : Move the control stick or Power off the receiver
    12. Can be connected to any kinds of servo
    13. Should be connected to the servo that runs when flying
    SKU: AVLOSTALARM
    €6.00
    inc. VAT

     IN STOCK
  • Low Profile Nyloc motor Lock Nut black M5 (2x CW & 2x CCW)

    Low Profile Nyloc motor Lock Nut black M5 (2x CW & 2x CCW)

    Low Profile Nyloc motor Lock Nut black M5 (2x CW & 2x CCW)

    SKU: M5FPVNUT
    €4.00
    inc. VAT

     IN STOCK
  • M2.5x10 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M2.5x10 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M2.5x10 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF091322510
    €3.00
    inc. VAT

     IN STOCK
  • M2.5x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M2.5x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M2.5x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF091322516
    €3.50
    inc. VAT

     IN STOCK
  • M2.5x6 A2 Hex Socket Flat Point Stainless Steel Grub Screws (10pcs)

    M2.5x6 A2 Hex Socket Flat Point Stainless Steel Grub Screws (10pcs)

    M2.5x6 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF09132256
    €3.00
    inc. VAT

     IN STOCK
  • M3 Nylon Hexagon Machine Nut Black DIN 934 Fastener (10 pcs)

    M3 Nylon Hexagon Machine Nut Black DIN 934 Fastener (10 pcs)

    M3 Nylon Hexagon Machine Nut Black DIN 934 Fastener

    Set includes 10 pcs

    SKU: M3NUTB
    €2.00
    inc. VAT

     IN STOCK
  • M3 Nylon Hexagon Machine Nut White DIN 934 Fastener

    M3 Nylon Hexagon Machine Nut White DIN 934 Fastener

    M3 Nylon Hexagon Machine Nut White DIN 934 Fastener

    Set includes 10 pcs

    SKU: M3NUTW
    €2.00
    inc. VAT

     IN STOCK
  • M3 x 0.5mm Miniature Bearing Shims washers 3x5mm (pack of 10)

    M3 x 0.5mm Miniature Bearing Shims washers 3x5mm (pack of 10)

    These miniature bearing shims are a must for ensuring smooth bearing operation. Fitted between the bearing and mounting surface or between bearings to prevent friction and damage of the sealing shields.

    Also ideal for the precision adjustment of component positions.

    Dimensions:

    Internal Diameter - 3.0mm
    External Diameter - 5.0mm
    Thickness - 0.5-1mm

    Supplied in packs of 10

    SKU: M3X0.5S
    €4.00
    inc. VAT

     IN STOCK
  • M3x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF09132312
    €3.00
    inc. VAT

     IN STOCK
  • M3x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF09132316
    €3.00
    inc. VAT

     IN STOCK
  • M3x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF09132320
    €3.00
    inc. VAT

     IN STOCK
  • M3x25 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x25 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x25 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF09132325
    €3.50
    inc. VAT

     IN STOCK
  • M3x8 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x8 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M3x8 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF0913238
    €3.00
    inc. VAT

     IN STOCK
  • M4x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M4x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M4x12 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF09132412
    €3.00
    inc. VAT

     IN STOCK
  • M4x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M4x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M4x16 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF09132246
    €3.00
    inc. VAT

     IN STOCK
  • M4x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M4x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws

    M4x20 A2 Hex Socket Flat Point Stainless Steel Grub Screws Socket set screws are fabricated from alloy steel ,and threaded the entire length except for the length of the point.

    The point of the set screw is designed to bear on a mating part

    Set of 10 pcs

    SKU: EF091322420
    €3.50
    inc. VAT

     IN STOCK

Manufacturers