AlignRc

AlignRc

producer of famous T-Rex helicopters

Products


  • T-Rex 700/800 Tail Rotor Holder

    T-Rex 700/800 Tail Rotor Holder

    Use for T-REX 700X / 700N / 700E / 800E
    Weight: 44g
    Dual radial bearing with thrust bearing design to dramatically increase rudder precision and gyro locking action.

    Comment

    Must with Torque Tube Rear Drive Gear Set (NH7042A).

    SKU: H70T00BX
    €28.90
    inc. VAT

     72HR STOCK
  • T-REX 700E Carbon Main Frame LEFT 2mm

    T-REX 700E Carbon Main Frame LEFT 2mm

    Use for T-REX 700E.

    SKU: H70041
    €74.00
    inc. VAT

     72HR STOCK
  • T-REX 700E Carbon Main Frame RIGHT 2mm

    T-REX 700E Carbon Main Frame RIGHT 2mm

    Use for T-REX 700E.

    SKU: H70042
    €74.00
    inc. VAT

     72HR STOCK
  • T-Rex 700E Painted Canopy

    T-Rex 700E Painted Canopy

    Use for T-REX 700E.

    Specification:

    • GF painted canopy
    • Canopy nut x 4(2.7x7x11x2.5mm)
    • Canopy protector
    • R4 pin

     

    SKU: HC7652
    €89.50
    inc. VAT

     72HR STOCK
  • T-rex 700E torque tube Front Gear 22T M1

    T-rex 700E torque tube Front Gear 22T M1

    Use for T-Rex 700E Front drive gear assembly, 22T

    SKU: H70G001AXW
    €13.99
    inc. VAT

     72HR STOCK
  • T-REX 700L Dominator BEASTX TOP Super Combo

    T-REX 700L Dominator BEASTX TOP Super Combo

    Introducing the highly anticipated, most innovative, brand new T-REX 700L Dominator TOP!

    With fully mighty power energy of the 850MX (490KV) motor paired with Castle Edge HV 160 speed controller for unparalleled power output.
    The brand new high voltage brushless BL815H/BL855H servos also included featuring with high torque and super efficiency reaction and higher precision; also keep extremely low temperature after flight not only can extend the service life but also be the favorite ones for all our factory pilots.
    Newly outstanding material and superior design concept are all in one, the elaborate matt black carbon fiber structure, stunning red DFC rotor head set, anti-rotation bracket, and torque tube drive gear set and so on, dramatically enhance model strength and esthetics all at once.

    Align’ s 2014 flagship T-Rex 700L TOP Dominator, incorporates all the top grade upgrades, and the Microbeast PLUS flybarless system, with stability and power exceeding all past expectations.
    The superior control feel, and attractive look, the T-Rex 700L TOP Dominator is the best choice for any enthusiasts!

    Features:

    • The 700 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision.
    • 850MX inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It′s capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.
    • The latest BL815H and BL855H metallic brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision. These servos are highly appraised by team pilots for their low operation heat, contributing to dramatically increased longevity.
    • Brand new frame reinforcement plates and blocks effectively improves frame′s anti-torsion ability. The improvement in frame rigidity and solidness is especially evident during extreme 3D maneuvers.
    • T-REX 700L TOP with newly elaborate matt black carbon fiber material on main frame and tail boom, bring much more stylish and delightful presentation than others.
    • Brand new matting carbon tailboom using carbon fiber and aluminum imbedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopter, definitely let your helicopter outstanding in the flying field.
    • Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 700L.
    • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.

    Specifications:

    • Length: 1350mm
    • Height: 360mm
    • Width: 208mm
    • Main Blade Length: 700mm
    • Main Rotor Diameter: 1582mm
    • Tail Rotor Diameter: 281mm
    • Motor Drive Gear: 13T
    • Main Drive Gear: 110T
    • Autorotation Tail Drive Gear: 104T
    • Tail Drive Gear: 22T
    • Drive Gear Ratio: 1:8.46:4.37
    • Weight (with Motor): 3310g

    Includes:

    • 1x T-REX 700L DOMINATOR Kit
    • 2x 700 Carbon Fiber Blade
    • 2x 105mm 3K Carbon Fiber Tail Blade
    • 1x 850MX Brushless Motor(490KV) x 1
    • 3x BL815H High Voltage Brushless Servo x 3
    • 1x BL855H High Voltage Brushless Servo x 1
    • 1x 3K Carbon Fiber Tail Boom
    • 1x Aluminum Tail Boom
    • 1x Castle EDGE HV 160 Brushless ESC
    • 1x BEASTX MICROBEAST Plus Flybarless System

    Radio transmitter and electronic equipment required for assembly:
    • 1x Transmitter (7-channel or more, helicopter system)
    • 1x Receiver (7-channel or more, according to Transmitter)
    • 2x 6S Li-Po 4500 ~ 5200mAh
    • 1x 2S Li-Po 1900 ~ 2300mAh
    • 1x Digital Pitch Gauge
    • 1x Charger

    SKU: RH70E14X
    €1699.90
    inc. VAT

     72HR STOCK
  • T-REX 700L Dominator Kit

    T-REX 700L Dominator Kit

    Powered by 800MX 520KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
    In addition, numerous performance upgrades were carried on to this model, such as: DFC main rotor assembly, new style swashplate anti-rotation guide, hardened main gear, new style tail transmission, dual pivoted tail control system, metal frame reinforcement plates, etc.

    The superior control feel, and attractive look, the T-Rex 700L Dominator is the top choice for any enthusiasts!

    Features:

    • The 700 DFC flybarless rotor head system utilizes extreme low CG design, effectively reduces resistance during flight, increased flight responsiveness and precision.
    • Brand new frame reinforcement plates and blocks effectively improves frame′s anti-torsion ability. The improvement in frame rigidity and solidness is especially evident during extreme 3D maneuvers.
    • 3K side frame plate is integrated with battery rail, combined with all in one cartridge and latching battery mounting design, and CNC aluminum alloy battery mounting plate, the system allows for simplified switching of battery packs and crash protection.
    • Utilizes newly designed vertical tail fin, creating a brand new look for T-Rex 700L.
    • Powered by 800MX 520KV motor engraved with DOMINATOR insignia, providing extraordinary power output.
    • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
    • Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.

    Specifications:

    Length: 1350mm
    Height: 360mm
    Width: 208mm
    Main Blade Length: 700mm
    Main Rotor Diameter: 1582mm
    Tail Rotor Diameter: 281mm
    Motor Drive Gear: 12T
    Main Drive Gear: 112T
    Autorotation Tail Drive Gear: 104T
    Tail Drive Gear: 22T
    Drive Gear Ratio: 1:9.33:4.37
    Weight (with Motor): 3310g

    Includes:

    • 1x T-REX 700L DOMINATOR Kit
    • 2x 700 Carbon Fiber Blade
    • 2x 105mm 3K Carbon Fiber Tail Blade
    • 1x 800MX Brushless Motor (520KV)
    • 1x 3K Carbon Fiber Tail Boom
    • 1x Aluminum Tail Boom

    Required for assembly:

    • 1x Transmitter (7-channel or more, helicopter system)
    • 1x Receiver (7-channel or more, according to Transmitter)
    • 1x Brushless ESC ~120A-160A
    • 1x Flybarless system
    • 3x Swashplate Servo
    • 1x Tail Servo
    • 2x 6S Li-Po 4500 ~ 5200mAh
    • 1x 2S Li-Po 1900 ~ 2300mAh
    • 1x Digital Pitch Gauge
    • 1x Charger

    SKU: RH70E20X
    €999.90
    inc. VAT

     72HR STOCK
  • T-REX 700N / 700E blade damper

    T-REX 700N / 700E blade damper

    T-REX 700N / 700E blade damper

    SKU: HN7111
    €5.60
    inc. VAT

     72HR STOCK
  • T-REX 700N DFC Combo

    T-REX 700N DFC Combo

    The 2008 Align T-Rex 700N was developed based on years of R&D experiences, with superior design and economical pricing that brought 700 class glow helis to the masses, enabling Align to achieve a brand new milestone.
    Now to celebrate this achievement, Align improved upon the already excellent design and introduces the brand new T-Rex 700N DFC!

    Similar to the rigid and light design of the original, the most recognizable feature of the T-Rex 700N DFC is its narrow profile, which creates the impression of solid and simplicity visual effect.
    The DFC main rotor system provides more direct and faster control feedback.
    The new M1 helical main gear and new style tail control assembly improves the main gear durability and tail locking performance.
    Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration.

    Features:

    • Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
    • 700DFC CCPM Metal Swashplate and metal main shaft bearing block.
    • New style H-cross section electronics mounting platform for simplified installation of electronics.
    • Precision CNC machined aluminum pieces including elevator servo mount.
    • Equipped with new high strength cnc m1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
    • 3K carbon plate narrow frame design, simple yet highly rigid, making assembly and maintenance convenient.
    • Utilizes larger capacity fuel tank for larger displacement engines, increasing 3D flight duration.
    • Tailboom is extended by 15mm to support the use of 720mm main blades. When equipped with 105 or 120 class engine, there will be a noticeable increase in power and performance!
    • High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.

    Specifications:

    Length: 1361mm
    Height: 385mm
    Main Blade Length: 700mm
    Main Rotor Diameter: 1582mm
    Tail Blade Length: 115mm
    Tail Rotor Diameter: 281mm
    Engine Pinion Gear: 14T
    Main Drive Gear: 112T
    Autorotation Tail Drive Gear: 104T
    Tail Drive Gear: 21T
    Drive Gear Ratio: 8:1:4.95 (E:M:T)
    Fuel Tank Capacity: 660cc
    Weight (with Power System): approx. 4200g

    Includes:

    • 1x T-REX 700 Nitro Kit
    • 2x 700mm Carbon fiber Main blade
    • 2x 115mm Carbon fiber Tail blade
    • 1x 2 In 1 Voltage regulator combo
    • 3x DS615 Digital servo
    • 1x DS655 Digital servo
    • 1x Aluminum Tail Boom

    Required for assembly:

    • 1x Transmitter (7-channel or more, helicopter system)
    • 1x Receiver (7-channel or more)
    • 1x Standard servo (for throttle)
    • 1x Flybarless System
    • 1x Governor Sensor
    • 1x Engine starter
    • 1x Digital pitch gauge
    • 1x Fuel pump
    • 1x Engine fuel
    • 1x 90-120 Muffler
    • 1x 90-120 Engine

    SKU: RH70N07X
    €1049.90
    inc. VAT

     72HR STOCK
  • T-Rex 700N DFC Metal Elevator Servo Mount

    T-Rex 700N DFC Metal Elevator Servo Mount

     6061-T6 Aluminum alloy material and CNC processed.
    Use for T-REX 700N DFC.

    Specifications:

    •   Metal Elevator servo mount x 1
    •   Socket buton head screw x 4(M2.5x12mm)
    •   Socket buton head screw x 4(M2.5x8m
    SKU: H7NB013XX
    €15.00
    inc. VAT

     LOW STOCK
  • T-Rex 700N DFC Torque Tube

    T-Rex 700N DFC Torque Tube

    T-Rex 700N DFC Torque Tube

    Specifications:

    • Torque tube x 1
    • Torque Rod Sleeve x 2(Φ7.95xΦ10.5x5mm)
    • Bearing MR148ZZ x 2(Φ8xΦ14x4mm)

    Instruction:     

    • Use for T-REX 700 Nitro DFC.
    • 6061-T6 Aluminum alloy material.
    SKU: H7NT004A
    €18.90
    inc. VAT

     LOW STOCK
  • T-REX 700XN Dominator KIT only NEW 2018 model

    T-REX 700XN Dominator KIT only NEW 2018 model

    T-REX 700XN Dominator KIT only NEW 2018 model

    Features:

    • New slim chassis design
    • Revised clutch lining with steel alloy
    • New powerful cooling system
    • Reinforced carbon rear support

    Technical specifications:

    • Length: 1346mm
    • Height: 384mm
    • Width: 202mm
    • Main rotor blade length: 700mm
    • Main rotor diameter: 1570mm
    • Tail rotor blade length: 106mm
    • Tail rotor diameter: 281mm
    • Motor pinion: 13Z
    • Main gear: 107Z
    • Autorotation gear: 104Z
    • Tail rotor gearbox: 22Z
    • Translation: 8.23: 1: 4.73
    • Tank capacity: 630cc
    • Take-off weight (with battery): 4540g

    Content:

    • 1x Align T-REX 700XN Dominator kit ONLY( all below not included)
    • 1 pair of 700mm carbon main rotor blades
    • 1 pair of 106mm carbon tail rotor blades
    • 3x Align DS820M swashplate servo
    • 1x Align DS825M tail servo
    • 1x Align DS530 throttle servo
    • 1x Align B6TX 2-in-1 voltage regulator / pre-glow unit
    • 1x BEASTX Governor Sensor
    SKU: RH70N11KIT
    €799.00
    inc. VAT

     72HR STOCK
  • T-REX 700XN Dominator Super Combo NEW 2018 model

    T-REX 700XN Dominator Super Combo NEW 2018 model

    T-REX 700XN Dominator Super Combo

    Features:

    • New slim chassis design
    • Revised clutch lining with steel alloy
    • New powerful cooling system
    • Reinforced carbon rear support
    • New main and tail rotor blade design in yellow / black
    • Includes the proven DS820M / DS825M High Voltage Brushless Servos plus DS530 Digital Gas Servo


    Technical specifications:

    • Length: 1346mm
    • Height: 384mm
    • Width: 202mm
    • Main rotor blade length: 700mm
    • Main rotor diameter: 1570mm
    • Tail rotor blade length: 106mm
    • Tail rotor diameter: 281mm
    • Motor pinion: 13Z
    • Main gear: 107Z
    • Autorotation gear: 104Z
    • Tail rotor gearbox: 22Z
    • Translation: 8.23: 1: 4.73
    • Tank capacity: 630cc
    • Take-off weight (with battery): 4540g

    Content:

    • 1x Align T-REX 700XN Dominator
    • 1 pair of 700mm carbon main rotor blades
    • 1 pair of 106mm carbon tail rotor blades
    • 3x Align DS820M swashplate servo
    • 1x Align DS825M tail servo
    • 1x Align DS530 throttle servo
    • 1x Align B6TX 2-in-1 voltage regulator / pre-glow unit
    • 1x BEASTX Governor Sensor
    • 1 x MICROBEAST Plus Flybarless System

     

    See Product Options if you would like to remove servos or MICROBEAST Plus Flybarless System.

    SKU: RH70N11X
    €1299.99
    inc. VAT

     72HR STOCK
  • T-REX 800E 115mm Carbon Fiber Tail Blade

    T-REX 800E 115mm Carbon Fiber Tail Blade

    This is an Align 800E 115mm Carbon Fiber Tail Blade Set. These tail blades have been designed to provide optimal tail locking performance under high head speed and extreme flight conditions.
       
    Specifications:
    • Shape: Symmetrical wing
    • Width: 4.9mm
    • Shaft Diameter: 3mm
    • Weight: Approx. 12g/set
    SKU: HQ1150BT
    €36.90
    inc. VAT

     72HR STOCK
  • T-rex 800E Carbon Fiber Tail Boom-Matte Black

    T-rex 800E Carbon Fiber Tail Boom-Matte Black

    Brand new matting carbon tail boom using carbon fiber and aluminum embedded technology, features light weight and high strength, its unique matting carbon color coupled with whole helicopter, definitely let your helicopter outstanding in the flying field.

    SKU: H80T015X
    €52.90
    inc. VAT

     72HR STOCK
  • T-REX 800E PRO DFC Flybarless Helicopter Kit

    T-REX 800E PRO DFC Flybarless Helicopter Kit

    The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights.
    The CCPM direct connect servo design, coupled with DFC rotor head assembly, results in fast, precise, and more direct control reaction.
    The frame material integration technology is utilized on the landing gears and vertical tail fin, creating a unique look not only making the T-REX 800E PRO DFC stand out, but also resulting in an innovative design that encompasses structure rigidity along with beautiful aesthetics.

    The T-REX 800E PRO DFC can be described as the current top of the line flagship representing Align′s superior product line.
    Based on the pedigree of pure 3D flight, the newest design concept with absolute top of the line equipment, along with superior aesthetics and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

    Features:

    • Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
    • 850MX inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It′s capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.
    • New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
    • The shapely Reinforcement plate and brace are special design for T-REX 800E, effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure, thenew CNC machined aluminum electroplate red, is particular arranged in groups of 850MX motor, subtly bring the T-REX 800E PRO stylish and metal beauty.
    • Equipped with new high strength cnc M1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
    • Innovative composite of fiber material for landing gear, unique stylish shape, functional intensity and visual beauty are both innovative design.
    • Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
    • Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

    Specifications:

    • Length: 1490mm
    • Height: 402mm
    • Width: 204mm
    • Main Blade Length: 780mm
    • Main Rotor Diameter: 1740mm
    • Tail Blade Length: 115mm
    • Tail Rotor Diameter: 301mm
    • Motor Drive Gear: 12T
    • Main Drive Gear: 112T
    • Autorotation Tail Drive Gear: 104T
    • Tail Drive Gear: 22T
    • Drive Gear Ratio: 1:9.33:4.73
    • Weight (with Motor): 4100g

    Includes:

    • 1x T-REX 800E PRO DFC Kit
    • 1x 850MX Brushless Motor (490KV)
    • 2x 780mm Carbon Fiber Main Blade
    • 2x 115mm 3K Carbon Fiber Tail Blade
    • 1x 3K Carbon Fiber Tail Boom

    Required for assembly:

    • 1x Transmitter (7-channel or more, helicopter system)
    • 1x Receiver (7-channel or more)
    • 1x Brushless HV ESC ~160A
    • 2x 6S 22,2V Li-Po 4500~5200mAh or 1x 12S 44,4V Li-Po 4500~5200mAh
    • 1x 2S 7,4V Li-Po 1900~2300mAh
    • 1x Flybarless system
    • 3x Swashplate Servo
    • 1x Tail Servo
    • 1x LiPo Charger
    • 1x Dial Pitch Gauge
    SKU: RH80E12X
    €1299.90
    inc. VAT

     72HR STOCK
  • T-REX 800E PRO DFC Super Combo (MB+)

    T-REX 800E PRO DFC Super Combo (MB+)

    The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights.
    The CCPM direct connect servo design, coupled with DFC rotor head assembly, results in fast, precise, and more direct control reaction.
    The frame material integration technology is utilized on the landing gears and vertical tail fin, creating a unique look not only making the T-REX 800E PRO DFC stand out, but also resulting in an innovative design that encompasses structure rigidity along with beautiful aesthetics.

    Nothing was spared in the electronics components of the kit:
    The mighty power of the 850MX (490KV) motor paired with Castle Edge HV 160 speed controller for unparalleled power output;
    The new CNC machined aluminum cased BL815H brushless high voltage cyclic servos paired with BL855H rudder servo not only exhibited top of the line servo aesthetics, but also combine heat sink function and best performance in the market segment.

    The T-REX 800E PRO DFC can be described as the current top of the line flagship representing Align′s superior product line.
    Based on the pedigree of pure 3D flight, the newest design concept with absolute top of the line equipment, along with superior aesthetics and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

    Features:

    • Equipped with the low CG DFC rotor head, exhibits exhilarating 3D performance and unimaginable flight speed.
    • 850MX inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It′s capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.
    • The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
    • New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
    • The shapely Reinforcement plate and brace are special design for T-REX 800E, effectively increase the torsional strength of main frame, under extreme 3D maneuver, you can strongly feel its solid reinforcement from its structure, thenew CNC machined aluminum electroplate red, is particular arranged in groups of 850MX motor, subtly bring the T-REX 800E PRO stylish and metal beauty.
    • Equipped with new high strength cnc M1 helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power,reducing gear wear and power loss.
    • The latest BL815H and BL855H metallic brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision. These servos are highly appraised by team pilots for their low operation heat, contributing to dramatically increased longevity.
    • Innovative composite of fiber material for landing gear, unique stylish shape, functional intensity and visual beauty are both innovative design.
    • Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
    • Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

    Specifications:

    Length: 1490mm
    Height: 402mm
    Width: 204mm
    Main Blade Length: 780mm
    Main Rotor Diameter: 1740mm
    Tail Blade Length: 115mm
    Tail Rotor Diameter: 301mm
    Motor Drive Gear: 12T
    Main Drive Gear: 112T
    Autorotation Tail Drive Gear: 104T
    Tail Drive Gear: 22T
    Drive Gear Ratio: 1:9.33:4.73
    Weight (with Motor): 4100g

    Includes:

    • 1x T-REX 800E PRO DFC Kit
    • 1x MICROBEAST Plus Flybarless System
    • 2x 780mm Carbon Fiber Main Blade
    • 2x 115mm 3K Carbon Fiber Tail Blade
    • 3x BL815H High Voltage Brushless Servo
    • 1x BL855H High Voltage Brushless Servo
    • 1x 3K Carbon Fiber Tail Boom
    • 1x 850MX Brushless Motor (490KV)
    • 1x Castle EDGE HV 160 Brushless ESC

    Required for assembly:

    • 1x Transmitter (7-channel or more, helicopter system)
    • 1x Receiver (7-channel or more)
    • 2x 6S 22,2V Li-Po 4500~5200mAh or 1x 12S 44,4V Li-Po 4500~5200mAh
    • 1x 2S 7,4V Li-Po 1900~2300mAh
    • 1x LiPo Charger
    • 1x Dial Pitch Gauge

    SKU: RH80E10X
    €1899.90
    inc. VAT

     72HR STOCK
  • T-REX Dominator 450L Tail Boom

    T-REX Dominator 450L Tail Boom

    Use for Dominator 450L.

    6061-T6 Aluminum alloy material.
    450L Tail boom x 2(11x12x387mm)

    SKU: H45T010
    €9.90
    inc. VAT

     72HR STOCK
  • Tail Boom

    Tail Boom

    ●347 Tail boom x 2(Φ11xΦ12x347mm)
    ●Rudder control rod x 1(Φ1.3x330mm)
    ●Ball link x 2
    ●Tail control guide x 2(Φ12.2xΦ14.6x4mm)

    SKU: H45037
    €9.00
    inc. VAT

     72HR STOCK
  • Tail Boom (Red)

    Tail Boom (Red)

    ●Tail boom x 2(Φ20xΦ21.5x625mm)
    ●Tail control guide x 2
    ●Rudder control rod(B) x 1(Φ2x657mm)
    ●Boll link x 2
     

    SKU: HN6063
    €12.00
    inc. VAT

     72HR STOCK
  • Tail Boom Blue T-rex 450 Sport V2

    Tail Boom Blue T-rex 450 Sport V2

    Tail Boom Blue T-rex 450 Sport V2

    Included: 2 pcs in set

    SKU: H45155
    €9.90
    inc. VAT

     72HR STOCK
  • Tail Boom Brace

    Tail Boom Brace

    Tail Boom Brace

    SKU: H25022
    €3.50 €3.95
    inc. VAT

     LOW STOCK
  • Tail Boom Brace

    Tail Boom Brace

    ●Tail boom brace x 2

    SKU: H45036
    €7.50
    inc. VAT

     72HR STOCK
  • Tail Boom Brace

    Tail Boom Brace

    For T-rex 500

    Tail boom brace end x 4
    Tail boom brace x 2(Φ1.9xΦ3.9x320mm)

    SKU: H50036
    €10.00
    inc. VAT

     LOW STOCK

Manufacturers