AlignRc

AlignRc

producer of famous T-Rex helicopters

Products


  • Align T-Rex 600XN Main Shaft

    Align T-Rex 600XN Main Shaft

    ●600XN Main shaft x 2(Φ6xΦ10x188.3mm)
    ●Socket collar screw x 2(M3x19mm)
    ●M3 nut x 2
    ●Main shaft spacer(0.3) × 1(Φ10.1xΦ14x0.3mm)
    ●Main shaft spacer(0.5) × 1(Φ10.1xΦ14x0.5mm)
    SKU: H6NH004
    €19.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Main Shaft Bearing Block

    Align T-Rex 600XN Main Shaft Bearing Block

    Use for:

    • T-REX 600XN

    Aluminium alloy material

    Content:

    • 2x 600XN Main Shaft Bearing Block
    • 2x 6800ZZ Bearing (10x19x5mm)
    • 8x Socket Screw (M3x8mm)
    • 8x Socket Screw (M2.5x8mm)
    SKU: H6NB004XXT
    €28.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Receiver Mount

    Align T-Rex 600XN Receiver Mount

    Use for:

    • T-REX 600XN

    Glass fiber reinforced nylon material / Aluminium alloy material

    Content:

    • 1x 600XN Receiver Mount
    • 3x 700X Aluminum Hexagonal Bolt (M3x36mm)
    • 4x Socket Screw (M3x16mm)
    • 2x Socket Button Head Self Tapping Screw (T3x6mm)

     

    SKU: H6NB011XXT
    €20.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Rudder Servo Mount Set For Nitro

    Align T-Rex 600XN Rudder Servo Mount Set For Nitro

    Use for T-REX 600XN.
    Carbon fiber material / Aluminium alloy material.

    SKU: H6NB010
    €22.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Shapely Reinforcement Plate And Brace Assembly

    Align T-Rex 600XN Shapely Reinforcement Plate And Brace Assembly

    ●600XN Shapely Reinforcement Brace(L) x 1
    ●600XN Shapely Reinforcement Brace(R) x 1
    SKU: H6NB003
    €27.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-REX 600XN Super Combo with Blades, Servos, Engine, Muffler & more

    Align T-REX 600XN Super Combo with Blades, Servos, Engine, Muffler & more

    One of the most classic ALIGN models, T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness. Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

    T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision.

    This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

    The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

    The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos. The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

    The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!


    Features:


    After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.


    Landing skid is tilted 5 degree forward which improves crashworthiness.


    Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.


    The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.


    Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.


    Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
    Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.


    The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.


    CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.


    Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.


    High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
    An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.


    Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.
    Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.


    Specifications:

    • Length: 1152mm
    • Height: 356mm
    • Main Blade Length: 600mm
    • Main Rotor Diameter: 1354mm
    • Tail Rotor Diameter: 260mm
    • Engine Pinion Gear: 20T
    • Main Drive Gear: 170T
    • Autorotation Tail Drive Gear: 180T
    • Drive Gear Ratio (E:M:T): 8.5:1:4.5
    • Fuel Tank Capacity: 440ccm
    • Flying Weight Approx: 3400g

    Content:

    • 1x T-REX 600XN Kit
    • 1x Align 55H Engine (O.S. 55HZ Hyper)
    • 1x Align High Performance Muffler
    • 2x 600 Carbon Fiber Blade
    • 2x 95 Carbon Tail Blades
    • 3x DS820M Standard servo
    • 1x DS825M Tail servo
    • 3x DS530 Throttle servo
    • 1x Govemor Sensor
    • 1x B6M 2-In-1 Voltage Regulator

    Required for assembly:

    • 1x Transmitter (7-channel or more, helicopter system)
    • 1x Receiver (7-channel or more)
    • 1x Engine starter
    • 1x Flybarless system
    • 1x Governor System (if not integrated in Flybarless System)
    • 1x Digital pitch gauge
    • 1x Fuel pump
    • 1x Engine fuel
    • 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)
    SKU: RH60N06X
    €1499.00
    inc. VAT

     LOW STOCK
  • Align T-Rex 600XN Tail Boom Mount Set

    Align T-Rex 600XN Tail Boom Mount Set

    Use for:

    • T-REX 600XN

    Glass fiber reinforced nylon material / Aluminium alloy material

    Content:

    • 1x 600XN Tail Boom Mount (L)
    • 1x 600XN Tail Boom Mount (R)
    • 5x 700X Aluminum Hexagonal Bolt (M3x36mm)
    SKU: H6NT002XXT
    €16.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN The 3rd Main Shaft Bearing Block

    Align T-Rex 600XN The 3rd Main Shaft Bearing Block

    Use for:

    • T-REX 600XN

    Aluminium alloy material

    Content:

    • 1x 600XN Main Shaft Third Bearing Block
    • 1x 689ZZ Bearing (9x17x5mm)
    • 4x Socket Screw (M3x8mm)
    SKU: H6NB005XXT
    €20.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-rex 700 M1 Autorotation tail drive gear 104T

    Align T-rex 700 M1 Autorotation tail drive gear 104T

    104T M1 Autorotation tail drive gear x 1

    Use for all 700 class machines.

    SKU: HN7020BT
    €14.00
    inc. VAT

     LOW STOCK
  • Align T-rex 700 Main Drive Gear 164T M0.7

    Align T-rex 700 Main Drive Gear 164T M0.7

    Newly designed highly rigid 700 M0.7 main gear, manufactured through high precision CNC machining process, with wear resistant, low noise, and highly efficient energy transfer properties to dramatically increase power output
    SKU: HN7019-4T
    €16.00
    inc. VAT

     LOW STOCK
  • Align T-Rex 700 Tail Boom Support Rods

    Align T-Rex 700 Tail Boom Support Rods

    Align T-Rex 700 Tail Boom Support Rods

    Use for:

    • 700X / 700L / 700N / 700XN / 700E / 760X / 800

    Content:

    • 2x 2x 700XN Tail boom
    • 4x M4 Washer (4x8x1mm)
    • 2x Socket Screw (M4x12mm)
    • 2x Socket Screw (M4x14mm)

     

    SKU: H7NT007XXT
    €15.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 700 Tail Control Arm

    Align T-Rex 700 Tail Control Arm

    Use for T-REX 700


    Content

    • 2x 700 Tail Control Arm
    • 2x 700N Linkage Ball C
    SKU: H70T011XX
    €19.90
    inc. VAT

     72HR STOCK
  • Align T-Rex 700 Tail Rotor Hub

    Align T-Rex 700 Tail Rotor Hub

    • 700 tail rotor hub x 1
    • Tail rotor washer(D8xD10x0.3mm) x 4
    • washer(D3xD8x1mm) x 2
    • M4 set screw x 2(M4x4mm)
    • socket collar screw x 2(M3x8mm)
    • Weight:27.19g


    Use for T-REX 700E/700N/800
    Must with:
    700 Tail Rotor (H70T001XXW)

    SKU: H70T002BXT
    €8.99
    inc. VAT

     72HR STOCK
  • Align T-rex 700-800 DFC Main rotor grip arm

    Align T-rex 700-800 DFC Main rotor grip arm

    Suitable for T-REX 700-800 DFC

    SKU: H70092T
    €22.90
    inc. VAT

     72HR STOCK
  • Align T-rex 700E Latch-type Receiver Mount

    Align T-rex 700E Latch-type Receiver Mount

    Use for T-REX 700E
    Suitable for Metal battery mount (H70084)
    SKU: H70086
    €23.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 700E Painted Canopy

    Align T-Rex 700E Painted Canopy

    Align T-Rex 700E Painted Canopy

    Use for:

    • T-REX 700E/700L/700X/760X.

    Manufactured with durable lightweight fiber material, and utilizing an engineered aerodynamic design, the Align Advanced Lightweight Canopy forms a protective shield for the entire machine.

    Content:

    • Painted canopy x 1
    • Canopy nut x 4(F2.7xF12x6mm)
    • Canopy protector x 4(F7xF12x2.5mm)
    • R4 pin x 4(M4)
    SKU: HC7660T
    €64.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 700E tail rotor pushrod

    Align T-Rex 700E tail rotor pushrod

    Align T-Rex 700E tail rotor pushrod

    SKU: H70073A
    €21.50
    inc. VAT

     72HR STOCK
  • Align T-Rex 700E Three Tail Blade Set

    Align T-Rex 700E Three Tail Blade Set

    Suitable for T-REX 700 / 760 / 800
    The brand new 700E three tail blade set is specially made from aerospace grade aluminum alloy with precise mechanical process, highly enhance structural rigidity and precision.
    Total 3 tail blades design allow to achieve superior tail-lock performance and excellent controlling feel. For those who is addicted to 3D flying, you must convert to the three tail blade set and enjoy the amazing powerful flight performance.

    Content

    • 3x Metal Tail Rotor Holder
    • 1x Stainless Steel Tail Rotor Hub
    • 3x Tail Rotor Washer (8x10x0.3mm)
    • 3x Socket Button Head Collar Screw (M3x8mm)
    • 6x MR106ZZ Bearing (6x10x3mm)
    • 3x Thrust Bearing F5-10M (5x10x4mm)
    • 3x M3 Nut
    • 1x M4 Set Screw (M4x4mm)
    • 1x Metal Tail Pitch Assembly
    • 1x Slide Shaft
    • 1x Collar
    • 2x MR128ZZ Bearing (8x12x3.5mm)
    • 3x Control Link
    • 1x Bearing Holder
    • 6x Collar
    • 6x Collar Screw (M2x6mm)
    • 3x Socket Button Head Collar Screw (M3x17mm)
    • 3x M3 Nut
    SKU: H70T008XXT
    €72.90
    inc. VAT

     72HR STOCK
  • Align T-Rex 700E TiN Main Rotor Shaft

    Align T-Rex 700E TiN Main Rotor Shaft

    Align T-Rex 700E TiN Main Rotor Shaft

    Use for:

    • T-REX 700E / 700X / 760X

    All new 700E TiN Shaft is produced by Physical Vapor Deposition (known as TiN, gold color). Main features will be well hardness coating protection, high density, low coefficient of abrasion, excellent adhesion, oxidation, and corrosion resistance improvement. It will definitely make your heli to be in high quality and excellent durability at whole time.

    Content:

    • 1x 700E TiN Main Rotor Shaft
    • 1x Socket buton head collar screw (M4x24mm)
    • 1x M4 nut
    • 1x Main shaft spacer (1) (12x16x1mm)
    • 1x Main shaft spacer (0.3) (12x16x0.3mm)

     

    SKU: H70H016XXT
    €27.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 700E Tri-Blades Head Feathering Shaft

    Align T-Rex 700E Tri-Blades Head Feathering Shaft

    Use for 700 / 760 / 800 with Three-Blade Rotorhead

    Content

    • 3x 700E Tri-Blades Head Feathering Shaft
    SKU: H70H011XXT
    €12.90
    inc. VAT

     72HR STOCK
  • Align T-Rex 700E Tri-Blades Linkage Ball Set

    Align T-Rex 700E Tri-Blades Linkage Ball Set

    Use for T-REX 700 / 760 / 800 with Three-Blade Rotorhead

    Content

    • 3x 5 Linkage Ball B (M3x4mm)
    • 8x 700N Linkage Ball B (M3x4mm)
    • 1x 5 Linkage Ball D (M3x3.5mm)
    • 1x 5 Long Linkage Ball (M3x4mm)
    SKU: H70Z006XX
    €12.90
    inc. VAT

     72HR STOCK
  • Align T-Rex 700N Engine Fan Cover Set

    Align T-Rex 700N Engine Fan Cover Set

    Use for:

    • T-REX 700XN / 700N DFC

    Content:

    • Engine fan cover(L) x 1 (157.5x104.5x43.1mm)
    • Engine fan cover(R) x 1 (157.5x104.5x43.1mm)
    • Hex mounting bolt x 2 (F2.5x60.9mm)
    SKU: H7NB011AXT
    €16.50
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 700X Anti Rotation Bracket

    Align T-Rex 700X Anti Rotation Bracket

    Use for:

    • T-REX 700X

    Content:

    • 1x 700X Anti Rotation Bracket
    • 4x Socket Screw (M2.5x6mm)
    SKU: H70B018XXT
    €21.00
    inc. VAT

     72HR STOCK
  • Align T-Rex 700X Canopy Support Set

    Align T-Rex 700X Canopy Support Set

    Use for:

    • T-REX 700X

    Content:

    • 2x 700X Canopy Support
    • 2x Canopy Support Washer
    SKU: H70B010XXT
    €7.00
    inc. VAT

     72HR STOCK

Manufacturers