AlignRc

AlignRc

producer of famous T-Rex helicopters

Products


  • Align T-Rex 500XT One-Way Bearing Shaft

    Align T-Rex 500XT One-Way Bearing Shaft

    Description:

    Align T-Rex 500XT One-way Bearing Shaft

    Use for:

    • T-REX 500XT

    Content:

    • One-way bearing shaft x 1(F7xF10x28.6mm)
    SKU: H50G012XXT
    €5.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 500XT Tail Boom Mount Set

    Align T-Rex 500XT Tail Boom Mount Set

    Description:

    Align T-Rex 500XT Tail Boom Mount Set

    Use for:

    • T-REX 500XT

    Content:

    • 500XT Tail boom mount(L) x 1
    • 500XT Tail boom mount(R) x 1
    • 500X Hex mounting bolt x 4(M2.5x47mm)
    SKU: H50T016XXT
    €11.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 500XT Torque Drive Upgrade Set

    Align T-Rex 500XT Torque Drive Upgrade Set

    Description:

    Align T-Rex 500XT Torque Drive Upgrade Set

    Use for:

    • T-REX 500X

    Highly reduce gear abrasion and increase power output gives more direct and precise flight performance and extraordinary tail performance.
    The new high intense Torque Tube allow to reduce gear abrasion and extend the gear lifetime value in extreme flight dynamics.
    Screw and fix the fixture on and modify the mainframe using rasp refer to the blue line instruction.

    Use with:

    • 500XT Torque Tube(H50T018XXW)
    • 500XT Tail Boom Mount Set(H50T016XXW)
    • M0.7 Torque Tube Front Drive Gear Set/34T(H50G013XXW)
    • Slant Thread Main Drive Gear/134T(H50178QA)
    • 130T Autorotation Tail Drive Gear(H50G010XXW)
    • 500X Main Gear Case Set(H50G006XXW)
    • 500XT One-way Bearing Shaft(H50G012XXW)

    Content:

    • 500XT Torque Tube x 1
    • 500XT Tail Boom Mount Set x 1
    • 500XT Torque Tube Rear Drive Gear Set x 1
    • Slant Thread Main Drive Gear/134T x 1
    • 130T Autorotation Tail Drive Gear x 1
    • 500XT Main Drive Gear Mount x 1
    • 500XT One-way Bearing Shaft x 1
    • 500XT Tail Torque Tube Unit x 1
    • 500XT Fixture for mainframe adjustment x 1
    SKU: H50T020XXT
    €59.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 500XT Torque Tube

    Align T-Rex 500XT Torque Tube

    Description:

    Align T-Rex 500XT Torque Tube

    Use for:

    • T-REX 500XT

    Content:

    • 500XT Torque tube x 1(F4.5xF6x533mm)
    • 500 Torque tube end x 2(F7.5x25mm)
    • 500XT Torque tube bearing holder x 1(F10xF18.2x10mm)
    • Bearing MR106ZZ x 1(F6xF10x3mm)

     

    SKU: H50T018XXT
    €9.50
    inc. VAT

     72HR STOCK
  • Align T-Rex 550E/600 Three-Blade Rotor Head

    Align T-Rex 550E/600 Three-Blade Rotor Head

    Suitable for T-REX 550 / 600


    The new 550E Three-Blade Rotor Head is specially made from 3-D rotation surface process, as well as aerospace grade aluminum alloy, strongly enhance structural toughness and precision. Also painted with high texture and bright red satin plating color highlight the extraordinary craftsmanship and beauty all in one. The new three-blade head provide superior flight stability with low CG design allow to reduce flying resistance but bring more rigidity and fast response on the other hand. Pilots can easily control between active and static condition, and enjoy the pleasure from the flight.
    Must use with:

    • 550/600 Three Blade Tailrotor H55T005XXT

    Content:

    • 1x Three-Blade Rotor Housing
    • 3x Metal Main Rotor Holder
    • 3x Three-Blade Shaft Set
    • 3x Head Damper (8x12.9x6.5mm)
    • 6x Elevator ball link (5x6x19mm)
    • 3x 550E Three-Blade Shaft screw
    • 3x Linkage rod A
    • 3x Spacer (8x11x1.3mm)
    • 6x Spindle bearing spacer (10x13.8x0.4mm)
    • 3x Thrust Bearing F8-14M (8x14x4.5mm)
    • 6x MR148ZZ Bearing (8x14x4mm)
    • 3x Washer (5x12x1mm)
    • 6x Socket Collar Screw (M3x6mm)
    • 2x Socket Screw (M3x10mm)
    • 2x Socket Button Head Screw (M2.5x8mm)
    • 2x Socket Collar Screw (M3x19mm)
    • 3x Socket Collar Screw (M4x25mm)
    • 3x Socket Screw (M5x10mm)
    • 2x M3 Nut
    • 3x M4 Nut
    • 3x F5 Linkage Ball B (M3x4)
    • 2x Elevator Arm Set
    • 1x Linkage Rod Set
    • 2x Washer (3x4.8x0.3mm)
    • 6x Linkage rod holder
    • 1x 550E Three-Blade Rotor Main Shaft
    • 1x Main shaft spacer 0.3mm
    • 1x Main shaft spacer 0.5mm
    • 1x CCPM Metal Swashplate
    • 5x Linkage Ball B (M3x4)
    • 1x 5 Linkage ball D (M3x3.5)
    • 1x 5 Long linkage ball (M3x4)
    SKU: H55H004XXT
    €198.99
    inc. VAT

     72HR STOCK
  • Align T-REX 550FL Main Shaft Set (2pcs)

    Align T-REX 550FL Main Shaft Set (2pcs)

    Main Shaft Set (2pcs) suitable for Align T-REX 550F

    Includes:

    • 550FL Main shaft x 2(Φ6x11.8x190mm)
    • Socket collar screw x 2(M3x19mm)
    • M3 nut x 2
    SKU: H55H003XXT
    €15.99
    inc. VAT

     LOW STOCK
  • Align T-Rex 600 2-way Fuel Filter

    Align T-Rex 600 2-way Fuel Filter

    Align T-Rex 600 2-way Fuel Filter

    Specifications:

    • Fuel filter x 1
    • Filter mesh x 1(Φ5.2xΦ7x19.5mm)
    • Fuel tube clip B x 1(33.5x9.8x3mm)
    SKU: HN6021T
    €4.85
    inc. VAT

     72HR STOCK
  • Align T-Rex 600XN Bottom Plate

    Align T-Rex 600XN Bottom Plate

    Use for:

    • T-REX 600XN

    Carbon fiber material

    Content:

    • 1x 600XN Bottom Plate
    SKU: H6NB007XXT
    €31.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Canopy Support Set

    Align T-Rex 600XN Canopy Support Set

    Use for:

    • T-REX 600XN

    Stainless steel material / Rubber material

    Content:

    • 2x 600XN Canopy Support
    • 2x 600N Canopy Support Washer

     

    SKU: H6NB012
    €6.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Carbon Fiber Main Frame (L)

    Align T-Rex 600XN Carbon Fiber Main Frame (L)

    Use for:

    • T-REX 600XN

    Carbon fiber material

    Content:

    • 1x 600XN Carbon Fiber Main Frame (Lower side)
    SKU: H6NB002XXT
    €34.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Carbon Fiber Vertical Stabilizer

    Align T-Rex 600XN Carbon Fiber Vertical Stabilizer

    Use for:

    • T-REX 600L / 600E / 600N / 600XN

    Carbon fiber material / Glass fiber reinforced nylon material

    Content:

    • 1x 600XN Carbon Fiber Vertical Stabilizer
    • 1x Vertical Stabilizer Mount
    SKU: H6NT003XXT
    €26.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN CCPM Metal Swashplate

    Align T-Rex 600XN CCPM Metal Swashplate

    ●CCPM Metal Swashplate x 1
    ●Bearing(6706ZZ) x 2(Φ30xΦ37x4mm)
    ●Linkage ball B(M3x4) x 6(Φ5x12mm)
    ●Φ5 Long linkage ball(M3x4) × 1(Φ5x28mm)
    SKU: H6NH005
    €40.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Clutch Bell Set

    Align T-Rex 600XN Clutch Bell Set

    Use for:

    • T-REX 600XN

    Aluminium alloy material

    Content:

    • 1x 600XN (44.4x47x20mm)
    • 1x Bearing 695ZZ (5x13x4mm)

     

    SKU: H6NB016XXT
    €24.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Clutch/Start Shaft New Version

    Align T-Rex 600XN Clutch/Start Shaft New Version

    Use for T-REX 600XN.
    Chromoly steel alloy material.

    SKU: H6NB015
    €17.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-REX 600XN Combo with Blades, Servos & more

    Align T-REX 600XN Combo with Blades, Servos & more

    One of the most classic ALIGN models, the T-REX 600N nitro helicopter. In 2018, we bring you the brand new design of T-REX 600XN, it inherits the design of T-REX 700XN featuring innovation, rigidity and lightness.

    Extremely perfection and precision, the T-REX 600XN is about to excite your inner soul to bring back your passion for nitro.

    T-REX 600XN adopts the new direct to swashplate servo design, compared to the previous generation T-REX 600N’s push-pull mode control, provides precise and fast control! Utilizing the 550 Flybarless Rotor Head System features an extremely low Center of Gravity (CG) design, to effectively reduces resistance during 3D maneuvers, and increase flight responsiveness and precision.

    This designed maintains a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior stable flight performance. The Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The T-REX 600XN maintains the proper CG, by moving the engine forward to allow the fuel tank to be positioned in the center of the main shaft. CG remains consistent as the fuel level changes during flight.

    The new steel alloy clutch liner is durable with temperature control designed to avoid the exploding clutch liner or a breaking clutch housing. The steel alloy clutch liner extends the life to over a 1000 flights. The Receiver Mount provides cable and wiring protection, and easy to maintenance by removing a few screws from the mainframe.

    The new high voltage output: 6A 7.4V BEC with down / regulation system for constant power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.

    The brand new DS820M/DS825M high voltage brushless servos use brushless motors for fast speed, high torque, superior, and efficient reaction time allows the Align 600XN precise, fast performance. The new CNC machined aluminum case design is aesthetically appealing while acting as a highly efficient heat sink.

    The new generation of T-REX 600XN innovative design will excite your inner soul to bring back your passion for nitro!


    Features:
    After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass and carbon fiber is lightweight and achieves best dynamic performance. Also a new unique paint scheme for the newest member of the T-REX family.


    Landing skid is tilted 5 degree forward which improves crashworthiness.
    Engineered Narrow Body Design efficiently decrease gear abrasion and frame deformation during flight. The Align T-REX new narrow body design is stronger and increases flight durability.


    The new direct to swashplate servo design provides precise and fast control. Designed to maintain a 90-degree symmetrical angle between the Rotor Grip Arms and Linkage Rods for superior and stable flight performance.


    Align Advanced Metal Swashplate strongly connects to the rotor holder grips preventing rotor head disengagement during intense flight. Two optional linkage ball mounting holes allow for personal selection of resolution based on desired flight performance.


    Receiver mount provides cable and wiring protection, easy to maintain equipment by removing a few screws from the mainframe.
    Maintaining the proper Center of Gravity CG is important for helicopters. After extensive Research and Development, moving the engine forward allowed the fuel tank to be positioned in the center of the main shaft. This optimum location for the fuel tank permits the 600XN to maintain consistent CG as the fuel level changes during flight.


    The idler pulley gear improves rotation stability and effectively reduces the load from the gears while increasing bearing capacity. The gears made of steel alloy are high strength and wear resistant.


    CNC metal reinforcement plate and brace align with frame mounting bolts effectively increasing the torsional strength of the mainframe. Under extreme 3D maneuvers, you can feel the improved reinforcement to the mainframe. Also, the plate helps with engine cooling and adds additional protection for the motor.


    Designed specifically for helicopters, utilizing a brushless motor for fast speed, high torque, and superior, efficient reaction time allows the Align 600XN precise, fast performance. The brand new DS820M high voltage brushless servo has a with a new CNC machined aluminum case. The new aluminum case design is aesthetically appealing while acting as a highly efficient heat sink for superior protection of the servo.


    High voltage output: 6A 7.4V BEC with down / regulation system for stable power to the CCPM server channel for receivers and servos. Includes a built-in one-button push glow plug igniter eliminating the hassle of using traditional electric clip plug on igniters. Also increased external high-frequency filter capacitance to effectively reduce the interference generated by external noise; such as high-speed and high torque servos.
    An integrated motor mounting bracket allows for efficient heat dissipation from the motor. The superior Cooling Motor Mount is CNC from high strength aluminum alloy, and anodized for aesthetically pleasing appearance.


    Dual-sided tail servo mount strengthens the entire frame structure while allowing for better accessibility when servicing the 600XN.


    Brand new strengthened precision design with high-end M4x8 hexagonal screw upgrade. The new rigid design improves and strengthens the entire structure enhancing tail performance for all pilots.


    Specifications:

    • Length: 1152mm
    • Height: 356mm
    • Main Blade Length: 600mm
    • Main Rotor Diameter: 1354mm
    • Tail Rotor Diameter: 260mm
    • Engine Pinion Gear: 20T
    • Main Drive Gear: 170T
    • Autorotation Tail Drive Gear: 180T
    • Drive Gear Ratio (E:M:T): 8.5:1:4.5
    • Fuel Tank Capacity: 440ccm
    • Flying Weight Approx: 3400g

    Content:

    • 1x T-REX 600XN Kit
    • 2x 600 Carbon Fiber Blade
    • 2x 95 Carbon Tail Blades
    • 3x DS820M Standard servo
    • 1x DS825M Tail servo
    • 3x DS530 Throttle servo
    • 1x Govemor Sensor
    • 1x B6M 2-In-1 Voltage Regulator

    Required for assembly:

    • 1x Transmitter (7-channel or more, helicopter system)
    • 1x Receiver (7-channel or more)
    • 1x Engine starter
    • 1x Flybarless system
    • 1x Governor System (if not integrated in Flybarless System)
    • 1x Digital pitch gauge
    • 1x Fuel pump
    • 1x Engine fuel
    • 1x 50~60 Muffler
    • 1x 50~60 Engine
    • 1x Receiver battery (2-3S LiPo 7,4V-11,1V 1800-2400mAh)
    SKU: RH60N07X
    €1199.90
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Drive Gear Assembly

    Align T-Rex 600XN Drive Gear Assembly

    Use for T-REX 600XN.
    Glass fiber reinforced nylon material.

    SKU: H6NB013
    €15.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Engine Fan Cover Set

    Align T-Rex 600XN Engine Fan Cover Set

    Use for:

    • T-REX 600N / 600XN

    Glass fiber reinforced nylon material / Aluminium alloy material

    Content:

    • 1x Engine fan cover (L) (134.58x97x36.34mm)
    • 1x Engine fan cover (R) 134.58x97x43.08mm)
    • 2x Hex mounting bolt (3x5x49mm).

     

    SKU: H6NB014XXT
    €16.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Engine Mount

    Align T-Rex 600XN Engine Mount

    Use for:

    • T-REX 600XN

    Aluminium alloy material

    Content:

    • 1x 600XN Engine Mount
    • 6x Socket Screw (M3x8mm)

     

    SKU: H6NB009XXT
    €31.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Engine Spur Gear Set/20T

    Align T-Rex 600XN Engine Spur Gear Set/20T

    Use for T-REX 600XN.
    High carbon steel material.
    Gear Ratio 1:8.5.

    SKU: H6NG003
    €17.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Frame Mounting Block

    Align T-Rex 600XN Frame Mounting Block

    Use for:

    • T-REX 600XN

    Aluminium alloy material

    Content:

    • 4x 600XN Frame Mounting Block
    • 8x Socket Screw (M3x6mm)

     

    SKU: H6NB008XXT
    €20.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Idler Pulley Spur Gear

    Align T-Rex 600XN Idler Pulley Spur Gear

    Use for T-REX 600XN.
    High carbon steel material.

     

    SKU: H6NG002
    €24.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Linkage Rod Set

    Align T-Rex 600XN Linkage Rod Set

    Use for:

    • T-REX 600XN

    Stainless steel material / POM material

    Content:

    •  2x 760X Linkage Rod A (M3x35mm)
    •  3x 700X Linkage Rod A (M3x41mm)
    •  10x 700N Elevator Ball Link (5x6x19mm)
    •  10x 700DFC Linkage Rod Holder (6x4.85x3mm)
    •  1x 600XN Throttle Linkage Rod (M2x60.5mm)
    •  2x Ball Link (5x20.5mm)
    SKU: H6NZ001XXT
    €15.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Main Frame Mounting Bolt

    Align T-Rex 600XN Main Frame Mounting Bolt

    Use for:

    • T-REX 600XN

    Aluminium alloy material

    Content:

    • 18x 600XN Main Frame Mounting Bolt (3x9.8x7.4mm)
    SKU: H6NB006XXT
    €13.99
    inc. VAT

     72HR STOCK
    NEW
  • Align T-Rex 600XN Main Rotor Holder Arm

    Align T-Rex 600XN Main Rotor Holder Arm

    ●Main rotor holder arm x 2
    ●Φ5 Linkage ball B(M3x4) x 2
    ●Socket collar screw x 4(M3x6mm)
    SKU: H6NH003
    €26.99
    inc. VAT

     72HR STOCK
    NEW

Manufacturers