AlignRc

• Carbon Fiber Main Frame(L) x 1(1.6mm)

• 500L Frame Mounting Block x 3
• Socket Screw x 6(M2.5x6mm)
• Socket botton head Screw x 2(M2.5x6mm)
• Socket Screw x 4(M2.5x8mm)
• Washer x 4(D2.6xD5.8x0.6mm)

• 4.7 Linkage ball B(M2.5x3) x 1 (4.75x25.25mm)
• 500 Linkage ball B(M2.5x3) x 2 (D4.75x9.77mm)
• 500 Linkage ball A(M2.5x3.5) x 2 (D4.75x8.18mm)
• 4.7 Linkage ball E(M2.5x2.5) x 2 (D4.75x11.5mm)
• Linkage ball A(M2x3.5) x 1 (D4.75x8.18mm)
• Linkage ball C(M2x4) x 1 (D4.75x13mm)

• 500FL Metal main rotor housing x 1
• 500 Feathering shaft sleeve x 1
• Damper rubber x 2(D6xD11x4mm)
• Spacer x 2(D6.1x(D10.5x1.5mm)
• Socket collar screw x 1(M2.5x16mm)
• M2.5 nut x 1

• 500L Motor mount x 1
• Socket screw x 4(M3x8mm)

Align T-Rex 500L/500 PRO DFC CCPM Metal Swashplate

Specially designed for both DFC and FL flybarless rotor head system, improving linkage rod connection strength and minimizing detachment during extreme flight maneuvers.
6061-T6 Aluminum alloy material and CNC processed.

Specification:
 

1. CCPM metal swashplate set × 1
2. D4.7 Long Linkage ball (M2.5x3) × 1(4.75x25.25mm)
3. Long Linkage ball (M2.5x3) × 1(4.75x24.59mm)
4. Linkage ball B (M2.5x3) × 2(D4.75x9.77mm)
5. Linkage ball A (M2.5x3.5) × 2(D4.75x8.18mm)
6. D4.7 Linkage ball E (M2.5x2.5) x 2(D4.75x11.5mm)

Use for:

• T-REX 500X

Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time.

Content:

• 2x 500X Belt Pulley Mount (12.5x8.5x12mm)
• 2x 500X Belt Pulley (4.5x8x7.2mm)
• 2x 500X Belt Pulley Spring (4x5.2x15mm)
• 4x Bearing 681ZZ-D2 (2x4.5x2mm)
• 2x Socket Botton Head Screw (M2x8mm)

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530/DS535 digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Specification :

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Pinion Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight(w/o battery): approx. 1400g

Content :

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo

Required for assembly :

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Align T-Rex 500X Metal Main Shaft Bearing Block (2)

Use for:

• T-REX 500X

6061-T6 Aluminum alloy material and CNC processed.

Content:

• Metal bearing holder(52x48.75x8mm) x 2
• Bearing MR688ZZ x 2(F8xF16x5mm)
• Socket screw x 8(M2.5x6mm)
• Socket button head screw x 12(M2.5x8mm)

Use for:

• T-REX 500L / 500X.

After performing many tests to determine the most efficient aerodynamic canopy, Align are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass fiber is lightweight and achieves best dinamic performance. Also a new unique painting scheme for the newest member of the T-REX family.

Specification:

• GF painted canopy x 1
• Canopy nut x 4(F2.6xF5.5x9.5x4.1)
• 500 PRO Canopy Mounting Bolt x 2
• Weight: Approx. 56g

NOTE:
For 500X canopy assembly, make sure to change and use 500 PRO canopy mounting bolt to prevent twisting canopy for unexpected danger.

Use for:

• T-REX 500X

Content:

• 2x 500X Tail Rotor Hub
• 2x M4 Screw (M4x3mm)
• 4x Washer (2.6x5.8x0.6mm)
• 4x Socket Collar Screw (M2.5x6mm)