AlignRc

AlignRc

producer of famous T-Rex helicopters

Products


  • Align GH4 Shutter Cable

    Align GH4 Shutter Cable

    • Suitable for Panasonic GH4 camera
    • Photo mode: Switch camera to photo mode, and configure RC trigger switch to enable remote photo taking function.Video mode:
    • Switch camera to video mode, and configure RC trigger switch to enable remote video start/stop function.
    • Due to differences in camera models, the start/stop functionality is dependent on camera specification.
    SKU: HEP00008
    €16.90
    inc. VAT

     72HR STOCK
  • Align Gimbal Mount

    Align Gimbal Mount

    • Gimbal Mount x 1
    • Socket Screw Nylok x4(M2.5x6mm)
    SKU: M480032
    €23.00
    inc. VAT

     72HR STOCK
  • Align Gimbal Signal Wire Set

    Align Gimbal Signal Wire Set

    Suitable for G3-GH / G3-5D Gimbal.

    Specification:
    • G3 Gimbal Signal Wire × 1 (around 180mm)
    • G3 AV Singal Wire x1(around 300mm)
    • S.BUS Signal Wire x1(around 50mm)
    • Wire Strap x2

    SKU: HEP00005
    €14.90
    inc. VAT

     LOW STOCK
  • Align hexa-copter M690L Multicopter Super Combo, GPS, APS-M

    Align hexa-copter M690L Multicopter Super Combo, GPS, APS-M

    M690L Super Combo Align multirotor The M690L is for specialist aerial photography for both amateur and professional. With impeccable quality of manufacturing as Align have repeatedly shown. Diagonal 900mm in hexacopter configuration, this UAV can carry a 3 axes G3 or GH-G3-5D for demanding professionals.

    Designed for moisture resistance, at the height of power and beauty, industrial and structural design.

    The arms have a quarter-turn to the Lock and unlock to allow implementation and quick storage. Once folded, the size is greatly reduced multi-rotors to be shipping with a minimum of clutter.

    The blades "high rigidity" plastic composite, reduce noise and are more efficient, thereby resulting in better flight efficiency and autonomy in higher flight. The blades are also collapsible to a simplified transport.

    The common platform permits rapid change between the quad and hexa platform platform when needed to power heavy equipment. the arms are very stiff a direct result of the expertise in the field of Professional Align helicopters. The entire chassis becomes very rigid, providing ideal support for aerial photography.

    The retractable landing gear, offering a field of view of 360 °, underwent a battery of tests and an endurance test of 20,000 repetitive actions.

    Brushless motors BL4213 370KV includes all the knowledge of the operator ALIGN: high torque, high efficiency, no loss of power and low operating temperature.

    This allows an autonomy of 20 minutes on bare chassis with a single Lipo 5200mAh, or 10 minutes with a G3 + GH4 nacelle. The flight time will be extended by using very high capacity batteries> = 10000mAh. The servo controllers have to interchangeable LED colors where necessary.

    The new flight controller APS-M supports quad configurations (4), hexa (6) and octo (8).

    Modes flights include attitude, speed GPS, angular GPS, Intelligent and manual. In addition, it offers GoHome failsafe, low voltage failsafe, OSD Signal output, gimbal control, fix-item survey functions.

    The battery holder allows the installation of a single high-capacity battery, or two smaller batteries. The carrier slides into place and Locks ensures maintaining flawless.
    The Gold connections are rated for 100Amps with patented anti-spark.

     Flight Control System
     
    Brand new APS-M multirotor auto-pilot system with higher performance, precision sensors and superior reliability platform.
    APS-M supports 4, 6, and 8 rotors multicopters, with flight modes such as Manual, Attitude, GPS (angular), GPS (speed), and Intelligent.
    APS-M provides OSD output function to output various flight parameters and with waypoint modes:
     
    1. Patrol (ground station),
    2. Commanded return home (Go Home),
    3. Automatic loss-of-signal return home.
     
    Compatible with PC and Bluetooth interface, could be easily adjust flight parameter and update firmware at any time.
    Also fully support with Futaba, Spectrum and JR S. BUS/S.BUS and DSM2/DSMX/DSMJ/DMS S system .

    Kit Contents:

    • Chassis configuration M690L hexacopter
    • 6x 4213  brushless motor.
    • 6x brushless ESC
    • Flight Controller APS-M GPS module
    • LED GPS
    • PCU Power Control Unit
    • Retractable trains
    • 6x 7.5 inch foldable rotor sets

    Requires:

    • Transmitter
    •  Receiver
    •  Battery range: 5000~12000mAh Li-Polymer Battery 6S

    Note: camera and gimbal are not included

    M690L Flight Parameters With 5200mAh battery:

    • Weight(w/o battery)    3400g    
    • Range of Load Current 1KG    26.9A
    • Takeoff Weight    4300g    
    • Range of Load Current  2KG    35A
    • Hover Power Currency    20A    
    • Range of Load Current  3KG    44A
    SKU: RM69001X
    €1450.00
    inc. VAT

     72HR STOCK
  • Align HS1222 Bearing, 4x7x2.5mm

    Align HS1222 Bearing, 4x7x2.5mm

    Tail Rotor Bearing Mount Washer x 1 (4x5.1x0.3mm)
    Bearing MR74ZZ x 2 (4x7x2.5mm)

    SKU: HS1222
    €5.00
    inc. VAT

     LOW STOCK
  • Align Li-poly Battery 2S1P 7.4V 2200mAh/30C

    Align Li-poly Battery 2S1P 7.4V 2200mAh/30C

    • Output:7.4V(2S1P)2200mAh
    • Rating:30C continuous,40C burst
    • Dimension:34x105x15mm
    • Weight:107g
    • approval(GTK-0504008)、 approval(GTK-0504008)
    • Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.
      (The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)
    SKU: HBP22002
    €31.00
    inc. VAT

     72HR STOCK
  • Align Linkage rod (A) set , Trex 450 FL

    Align Linkage rod (A) set , Trex 450 FL

    Use for T-REX 450 3G Programmable Flybarless System

    Arm F x 2(1.3x39mm)
    Ball Link x 4

    SKU: H45116
    €5.00
    inc. VAT

     IN STOCK
  • Align M0.6 New Torque Tube Front Drive Gear Set/40T RED

    Align M0.6 New Torque Tube Front Drive Gear Set/40T RED

    Align M0.6 New Torque Tube Front Drive Gear Set/40T RED

    SKU: H6NG001AXT
    €15.00
    inc. VAT

  • Align M470L Multicopter Quadcopter Super Combo With G2 Gimbal

    Align M470L Multicopter Quadcopter Super Combo With G2 Gimbal

    Align M470L Multicopter Quadcopter Super Combo Including: G2 Gimbal

    After times of researches and development, Align R&D team dedicated all of its technical expertise and experiences into the development of a brand new aerial photography platform, to give birth to the brand new.

    Moisture resistant shape at the pinnacle of power and beauty, industrial and structural design. Encompass stability control system, features light weight, strong payload, and long flight time.
    Superior in both high speed agility and static stability, this multi-purposed professional multicopter exceeds in all areas such as aerial photography or as leisurely sports flyer; yet its light weight allows for easy transport anywhere.

    Align G2 gimbal is specially designed for GoPro. G2 gimbal features advanced control system with superior computational power and the high precision brushless motors provide excellent agility and stability as well as powerful functionality.
    Support the use of satellite receivers and S.BUS/X.BUS receivers and supports programmability through PC interface, or connectivity to iOS/Android smartphones through Bluetooth. Enable you to enjoy aerial photography.

    Specification

    • Airframe Diameter: 710mm
    • Height: 266mm
    • Main Blade Length: 179mm
    • Main Rotor Diameter: 391mm
    • Flying Weight(without battery): 2500g

    Standard Equipment

    • G2 Gimbal x 1
    • Multicopter Canopy x 1
    • 7 Inch Main Rotor x 4 Sets
    • External Status LED x 1
    • BL4213(370KV) Brushless Motor x 4
    • Multicopter Brushless ESC x 4
    • PCU Power Control Unit x 1
    • APS-M Multicopter Controller x 1
    • Multicopter GPS Sensor x 1

    G2 Gimbal Specification

    • Input Voltage: DC 12V(3S)
    • Current Draw: <500mA
    • Maximum Control Range:
    • PAN 340°
    • ROLL ±20°
    • TILT 120°
    • Maximum Control Rotation Rate:
    • PAN 60°/s
    • ROLL 60°/s
    • TILT 60°/s
    • Temperature Range: -20~80°C
    • Voltage Output:5V / 0.3A
    • Dimension: 100.4x74x111.5mm
    • Weight: Approx. 200g

    APS-M Flight Control System Specification

    • Input Voltage:DC 4.5~8.4V
    • Operating Current Consumption:<250mA @ 4.8V
    • Operating Frequency:400Hz
    • Operating Temperature:-20℃~65℃
    • Hovering Precision (Depending on Satellite Status):Horizontal ±1m Vertical ±1m
    • Maximum Flight Speed:Horizontal 15m/sec Vertical 6m/sec
    • Maximum Altitude Restriction:700m(2297ft) above the takeoff point
    • Maximum Angular Speed:
    • Aileron 115°/sec
    • Elevator 115°/sec
    • Rudder 145°/sec
    • Maximum Tilting Angle:30 degrees
    • Supports External Peripherals:"G2/ G3 Gimbal、OSD+FPV Video Transmitter "
    • Supports Multicopter Configurations:"4 rotors +, 4 rotors X, 6 rotors +, 6 rotors X, 8 rotors +, 8 rotors X."
    • Dimension:49x34.3x20mm

    PCU Power Control Unit

    • Input Voltage:13.2V~25.2V(4S~6S Li-Po)
    • Operating Frequency:500KHz
    • Dimension:62x35x26mm

    BL4213 Motor 370KV(RPM/V)

    • Input Voltage:DC 22.2V
    • Max Continuous Current:25A
    • Max Continuous Power:550W
    • Stator Arms:12
    • Magnet Poles:14
    • Dimension/Weight:4x52x33mm / 185g

    Motor ESC

    • Input Voltage:13.2V~25.2V(4S~6S Li-Po)
    • Max Continuous Current:40A
    • Dimension:74.2x27x12.7mm
    SKU: RM47001X
    €899.00
    inc. VAT

     LOW STOCK
  • Align M470L Multicopter Quadcopter Super Combo Without Gimbal

    Align M470L Multicopter Quadcopter Super Combo Without Gimbal

    Align M470L Multicopter Quadcopter Super Combo Without gimbal RGG201,For those who want to use with their own gimbal

    After times of researches and development, Align R&D team dedicated all of its technical expertise and experiences into the development of a brand new aerial photography platform, to give birth to the brand new.

    Moisture resistant shape at the pinnacle of power and beauty, industrial and structural design. Encompass stability control system, features light weight, strong payload, and long flight time.
    Superior in both high speed agility and static stability, this multi-purposed professional multicopter exceeds in all areas such as aerial photography or as leisurely sports flyer; yet its light weight allows for easy transport anywhere.

    Specification

    • Airframe Diameter: 710mm
    • Height: 266mm
    • Main Blade Length: 179mm
    • Main Rotor Diameter: 391mm
    • Flying Weight(without battery): 2500g

    Standard Equipment

    • Multicopter Canopy x 1
    • 7 Inch Main Rotor x 4 Sets
    • External Status LED x 1
    • BL4213(370KV) Brushless Motor x 4
    • Multicopter Brushless ESC x 4
    • PCU Power Control Unit x 1
    • APS-M Multicopter Controller x 1
    • Multicopter GPS Sensor x 1

     

    APS-M Flight Control System Specification

     

    • Input Voltage:DC 4.5~8.4V
    • Operating Current Consumption:<250mA @ 4.8V
    • Operating Frequency:400Hz
    • Operating Temperature:-20℃~65℃
    • Hovering Precision (Depending on Satellite Status):Horizontal ±1m Vertical ±1m
    • Maximum Flight Speed:Horizontal 15m/sec Vertical 6m/sec
    • Maximum Altitude Restriction:700m(2297ft) above the takeoff point
    • Maximum Angular Speed:
    • Aileron 115°/sec
    • Elevator 115°/sec
    • Rudder 145°/sec
    • Maximum Tilting Angle:30 degrees
    • Supports External Peripherals:"G2/ G3 Gimbal、OSD+FPV Video Transmitter "
    • Supports Multicopter Configurations:"4 rotors +, 4 rotors X, 6 rotors +, 6 rotors X, 8 rotors +, 8 rotors X."
    • Dimension:49x34.3x20mm

    PCU Power Control Unit

    • Input Voltage:13.2V~25.2V(4S~6S Li-Po)
    • Operating Frequency:500KHz
    • Dimension:62x35x26mm

    BL4213 Motor 370KV(RPM/V)

    • Input Voltage:DC 22.2V
    • Max Continuous Current:25A
    • Max Continuous Power:550W
    • Stator Arms:12
    • Magnet Poles:14
    • Dimension/Weight:4x52x33mm / 185g

    Motor ESC

    • Input Voltage:13.2V~25.2V(4S~6S Li-Po)
    • Max Continuous Current:40A
    • Dimension:74.2x27x12.7mm
    SKU: RM47001NG
    €699.00
    inc. VAT

     LOW STOCK
  • Align M480 Body Mount Block

    Align M480 Body Mount Block

    Align M480 Body Mount Block

    SKU: M480003
    €14.90
    inc. VAT

     72HR STOCK
  • Align M480 Lower Carbon Plate

    Align M480 Lower Carbon Plate

    Align M480 Lower Carbon Plate

    SKU: M480002
    €89.00
    inc. VAT

     72HR STOCK
  • Align M480 Multicopter 24 Carbon Tube 225

    Align M480 Multicopter 24 Carbon Tube 225

    ●Multicopter 24 Carbon Tube 225 x 2 (22x24x225mm)

    SKU: M480011
    €35.00
    inc. VAT

     72HR STOCK
  • Align M480 Upper Carbon Plate

    Align M480 Upper Carbon Plate

    M480 Upper Carbon Plate

    SKU: M480001
    €69.90
    inc. VAT

     72HR STOCK
  • Align M480/690 800E Aerial Photography Landing Skid Nut - Red

    Align M480/690 800E Aerial Photography Landing Skid Nut - Red

    ●800E Aerial Photography Landing Skid Nut × 4

    SKU: H80F002R
    €12.00
    inc. VAT

     72HR STOCK
  • Align M480/690 800E Aerial Photography Landing Skid Nut - white

    Align M480/690 800E Aerial Photography Landing Skid Nut - white

    ●800E Aerial Photography Landing Skid Nut × 4

    SKU: H80F002W
    €12.00
    inc. VAT

     72HR STOCK
  • Align M480/690 Battery Plate Standoff

    Align M480/690 Battery Plate Standoff

    Align M480/690 Battery Plate Standoff

    ●M480/690 Battery Plate Standoff x 4 (M2.5x25mm)
    ●Flat Head Socket Cap Screw-Nylok x 4 (M2.5x6mm)
    ●Socket Screw-Nylok x 4 (M2.5x6mm)

    SKU: M480007
    €9.90
    inc. VAT

     72HR STOCK
  • Align M480/690 Gimbal Tube Mount

    Align M480/690 Gimbal Tube Mount

    Align M480/690 Gimbal Tube Mount

    M480 Gimbal Tube Mount x 4 (24.43x28.67x7.5mm)
    Flat Head Socket Cap Screw - Nylok x 8 (M2.5x6mm)
    Socket Screw - Nylok x 4 (M2.5x6mm)

    SKU: M480015
    €29.00
    inc. VAT

     72HR STOCK
  • Align M480/690 M2.5 Hex Standoff

    Align M480/690 M2.5 Hex Standoff

    Align M480/690 M2.5 Hex Standoff

    SKU: M480004
    €10.90
    inc. VAT

     72HR STOCK
  • Align M480/690 Main Battery Plate

    Align M480/690 Main Battery Plate

    Align M480/690 Main Battery Plate

    SKU: M480006
    €35.00
    inc. VAT

     72HR STOCK
  • Align M480/690 Motor Mounts - Black

    Align M480/690 Motor Mounts - Black

    ●M480 Motor Mounts - bottom x 1
    ●Motor Mounts Double Sided Tape x 1
    ●M480 Motor Mount Light Cover x 1
    ●Socket Screw - Nylok x 3 (M2.5x10mm)
    ●Socket Screw x 2 (M2.5x10mm)
    ●M2.5 Nut x 2
    ●Socket Button Head Self Tapping Screw x 2 (T2.6x6mm)

    SKU: M480031B
    €32.00
    inc. VAT

     72HR STOCK
  • Align M480/690 Motor Mounts - Red

    Align M480/690 Motor Mounts - Red

    ●M480 Motor Mounts - top x 1
    ●M480 Motor Mounts - bottom x 1
    ●Motor Mounts Double Sided Tape x 1
    ●M480 Motor Mount Light Cover x 1
    ●Socket Screw - Nylok x 3 (M2.5x10mm)
    ●Socket Screw x 2 (M2.5x10mm)
    ●M2.5 Nut x 2
    ●Socket Button Head Self Tapping Screw x 2 (T2.6x6mm)

    SKU: M480031R
    €32.00
    inc. VAT

     72HR STOCK
  • Align M480/690 Motor Mounts - White

    Align M480/690 Motor Mounts - White

    ●M480 Motor Mounts - top x 1
    ●M480 Motor Mounts - bottom x 1
    ●Motor Mounts Double Sided Tape x 1
    ●M480 Motor Mount Light Cover x 1
    ●Socket Screw - Nylok x 3 (M2.5x10mm)
    ●Socket Screw x 2 (M2.5x10mm)
    ●M2.5 Nut x 2
    ●Socket Button Head Self Tapping Screw x 2 (T2.6x6mm)

    SKU: M480031
    €32.00
    inc. VAT

     72HR STOCK
  • Align M480/690 Motor Mounts - Yellow

    Align M480/690 Motor Mounts - Yellow

    ●M480 Motor Mounts - bottom x 1
    ●Motor Mounts Double Sided Tape x 1
    ●M480 Motor Mount Light Cover x 1
    ●Socket Screw - Nylok x 3 (M2.5x10mm)
    ●Socket Screw x 2 (M2.5x10mm)
    ●M2.5 Nut x 2
    ●Socket Button Head Self Tapping Screw x 2 (T2.6x6mm)

    SKU: M480031Y
    €32.00
    inc. VAT

     72HR STOCK

Manufacturers