AlignRc

AlignRc

producer of famous T-Rex helicopters

Products


  • Align 325 Pro Carbon Fiber Blades

    Align 325 Pro Carbon Fiber Blades

    Apply to Trex 450 all types Use 3K carbon fiber material, and unique forming technique, improve anti-twist, suitable for extreme 3D flight.

    Specification:

    • Shape: Symmetrical wing
    • Length:325x32mm Width:4.7mm
    • Shaft Diameter:3mm
    • Weight: Appro 36g/set
    SKU: HD320ET
    €18.00
    inc. VAT

     LOW STOCK
  • Align 325E Pro Carbon Fiber Blades

    Align 325E Pro Carbon Fiber Blades

    Apply to T-REX 450 series.

    The 325 3K carbon fiber main blades are designed specifically for extreme 3D flying,
    featuring both high agility and excellent stability characteristics.
    The blades have brand new airfoil design, coupled with new painted graphics.
    In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight.
    The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

    Specification:
     

    • Shape: Symmetrical wing
    • Length:325x32mm
    • Width:4.7mm
    • Shaft Diameter:3mm
    • Weight: Appro 46g/set
    SKU: HD320EQCB
    €18.00
    inc. VAT

     IN STOCK
  • Align 325E Pro Carbon Fiber Blades Blue

    Align 325E Pro Carbon Fiber Blades Blue

    Apply to T-REX 450 series.

    The 325 3K carbon fiber main blades are designed specifically for extreme 3D flying,
    featuring both high agility and excellent stability characteristics.
    The blades have brand new airfoil design, coupled with new painted graphics.
    In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight.
    The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

    Specification:

    • Shape: Symmetrical wing
    • Length:325x32mm
    • Width:4.7mm
    • Shaft Diameter:3mm
    • Weight: Appro 46g/set
    SKU: HD320FQCB
    €18.00
    inc. VAT

     72HR STOCK
  • Align 35A RCE-BL35P Brushless ESC

    Align 35A RCE-BL35P Brushless ESC

    BEC output voltage(5~6V) to show great performance on the torque & speed of servo.
    Three programmable throttle speed settings to support quick throttle response.
    Govener Mode(governor speed controller、slow down system).
    Small and compact PCB design for ease of installation.
    Large heatsink for great thermal performance.
    High compatibility to work with 98% brushless motors in the market.
    Ultra smooth motor start design to run with all kinds of brushless motors.
    The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
    T BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It porvides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performance of R/C receiver and BEC.
    Users can use the transmitter to operate the motor setting by Super stylized CPU.
    If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.

    Specification:

    Continuous current:35Amps
    Surge current:45Amps for 15seconds
    Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
    Supporting maximum RPM:2poles=>190,000rpm
    Supporting input voltage:5.5V~16.8V
    Supporting battery types: Li-ion/ Li-poly 2~4 cells, Ni-Mh 6-12 cells
    BEC output: 5~6V,current 3A
    Size:58X22X11mm
    Weight:30g

    SKU: HES35P01
    €42.95
    inc. VAT

     72HR STOCK
  • Align 360mm 3G Carbon Fiber main Blades

    Align 360mm 3G Carbon Fiber main Blades

    - Apply to Trex450 all types
    - The 360 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

    SKU: HD360AT
    €24.00
    inc. VAT

     72HR STOCK
  • Align 380 Carbon Fiber Blades

    Align 380 Carbon Fiber Blades

    Apply to T-REX 470L.

    The 380 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

    *During the examination stage, we discover a tiny defective spot on the exterior part on this product, (this blemished part would not affect any function of the machine); therefore, we offer a better discount upon this product.

    Specification:

    • Shape: Symmetrical wing
    • Length:380x35mm
    • Width:4.6mm
    • Shaft Diameter:3mm
    • Weight: Approx 70g/set
    SKU: HD380A
    €26.00
    inc. VAT

     72HR STOCK
  • Align 3S1P 11.V 850mAh/30C Battery

    Align 3S1P 11.V 850mAh/30C Battery

    Features :
    • Output : 11.1V 9.5wh ( 3S1P ) 850mAh
    • Rating : 30C continuous, 40C burst
    • Dimension : 55 x 30 x 24.5mm
    • Weight : 70g
    SKU: HBP85001
    €18.00
    inc. VAT

     IN STOCK
  • Align 425 Carbon Fiber Blades

    Align 425 Carbon Fiber Blades

    The 425 3K carbon fiber main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.
    Use for T-REX 500 Flybarless System.

    Specification:

    • Shape: Symmetrical wing
    • Length:425x42x5.6mm
    • Width:10mm
    • Shaft Diameter:3mm
    • Weight:Approx 120g/set
    SKU: HD420F
    €39.00
    inc. VAT

     IN STOCK
  • Align 425 Carbon Fiber Blades - Blue

    Align 425 Carbon Fiber Blades - Blue

    The 425 carbon fiber Composites main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades' rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

    Specifications:

    • Shape: Symmetrical wing
    • Length:425x42x5.6mm
    • Width:10mm
    • Shaft Diameter:3mm
    • Weight:Approx 120g/set

     

    SKU: HD420G
    €39.00
    inc. VAT

     LOW STOCK
    NEW
  • Align 425GT Carbon Fiber Blades

    Align 425GT Carbon Fiber Blades

    Use for T-REX 500.

    425GT carbon fiber blade developed by Align RC world, utilizes unique compounding technology, features great performance for 3D and auto rotation flights.

    Specification:
     

    • Shape: Symmetrical wing
    • Length:425x42x5.6mm
    • Width:10mm
    • Shaft Diameter:3mm
    • Weight:Appro 120g/set
    SKU: HD420GT
    €39.00
    inc. VAT

     72HR STOCK
  • Align 450 Blade Clips

    Align 450 Blade Clips

    Use for Dominator 450L.

    Must with 450 Metal Tail Rotor Holder(H45T002XX).

    The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab reinforcement and rotation smoothly, but also avoid the scratches from the rotor holder rubbing against painting surface of blade causing expected vibration in flight.
     

    • 450 Main Blade Clips x 8
    • 450 Tail Blade Clips x 8
    SKU: H45H008
    €6.00
    inc. VAT

     72HR STOCK
  • Align 450 Dominator M2 socket collar screw

    Align 450 Dominator M2 socket collar screw

    • Socket collar screw × 4(M2x12mm)
    • Washer × 4(Φ2xΦ3.6x0.2mm)
    SKU: H25125
    €2.90
    inc. VAT

     72HR STOCK
  • Align 450/470 Dominator Landing Skid-Fluorescence Orange

    Align 450/470 Dominator Landing Skid-Fluorescence Orange

    Use for Align 450/470 Dominator/ Pro.

    • Landing skid x 1
    • Washer x 2(2.6x5.8x0.6mm)
    • Socket button head screw x 2(M2.5x10mm)
    SKU: H45050QM
    €8.90
    inc. VAT

     LOW STOCK
  • Align 450L Dominator Painted Canopy

    Align 450L Dominator Painted Canopy

    Use for:

    • T-REX 450L

    After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass fiber is lightweight and achieves best dinamic performance. Also a new unique painting scheme for the newest member of the T-REX family.

    Content:

    • GF painted canopy x 1
    • Canopy nut x 2
    • Weight: Approx. 38.5g
    SKU: HC4357T
    €27.00
    inc. VAT

     72HR STOCK
    NEW
  • Align 450L Speed Fuselage – Red & White

    Align 450L Speed Fuselage – Red & White

    Speed Fuselage – Red & White designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – Red & White
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4508
    €73.99
    inc. VAT

     72HR STOCK
  • Align 450L Speed Fuselage – Red & Yellow

    Align 450L Speed Fuselage – Red & Yellow

    Speed Fuselage – Red & Yellow designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – Red & Yellow
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4506
    €73.99
    inc. VAT

     72HR STOCK
  • Align 450L Speed Fuselage – White & Blue

    Align 450L Speed Fuselage – White & Blue

    Speed Fuselage – White & Blue designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – White & Blue
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4509
    €73.99
    inc. VAT

     72HR STOCK
  • Align 450L Speed Fuselage – Yellow & Blue

    Align 450L Speed Fuselage – Yellow & Blue

    Speed Fuselage – Yellow & Blue designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – Yellow & Blue
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4507
    €73.99
    inc. VAT

     72HR STOCK
  • Align 460MX Brushless Motor 6s 1800KV

    Align 460MX Brushless Motor 6s 1800KV

    Align 460MX Brushless Motor(1800KV)

    1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    3.Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
    4.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    5.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
    6.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
    7.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
    8.Suitable for T-REX 450E series,Must with RCE-BL45X Brushless ESC(Governer Mode)(HES45X01).

    Specification:
     

    • Input voltage:6S
    • Max continuous current:30A/45A(5sec)
    • Max output power:Approx. 650w/970W(5sec)
    • KV value:1800KV
    • Dimension:spindle 3.5x29.2x38mm
    • Weight:Approx. 87g

    Accessories:

    • Socket button head screw(M2.5X6mm) x 2
    • Washer(Φ2.6XΦ5.8X0.6mm) x 2
    • ALIGN standard 3mm gilt terminal x 3set
    SKU: HML46M01T
    €55.00
    inc. VAT

     72HR STOCK
  • Align 470MX Brushless Motor(1800KV/2818)

    Align 470MX Brushless Motor(1800KV/2818)

    Align 470MX Brushless Motor(1800KV/2818)

    Based on 6s voltage, the 470MX (1800KV) motor is tailor made for the T-Rex 470L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature.
    As a totem to the 850MX Dominator motor, The 470MX shares the same extraordinary pedigree.
    Even for the none 3D pilots, 470MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
    The 470MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    The 470MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
    Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
    Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
    Suitable for T-REX 470L series,Must with 50A Brushless ESC(Governer Mode)(HES50X01).

    Specification:

    • Input voltage:6S
    • Max continuous current:40A/60A(2sec)
    • Max output power:Approx. 890w/1300W(2sec)
    • KV value:1800KV
    • Stator Dimension:2818
    • Stator Arms:12
    • Magnet Poles:8
    • Dimension:spindle 3.5x36.4x51.7mm
    • Weight:Approx. 120g

    Accessories:

    • Socket button head screw(M2.5X6mm) x 2
    • Washer(F2.6XF5.8X0.6mm) x 2
    • ALIGN standard 3mm gilt terminal x 3set

     

    SKU: HML47M01T
    €56.99
    inc. VAT

     LOW STOCK
  • Align 500 Landing Skid

    Align 500 Landing Skid

    Align 500 Landing Skid

    Skid pipe x 2
    Landing skid x 2
    Skid pipe end cap x 4
    M3 Set screw x 4(M3x4mm)
    Socket screw x 4(M2x10mm)
    M2 nut x 4, Washer x 4
    Landing skid nut x 4
    Antena pipe x 1
     

    SKU: H50047
    €11.00
    inc. VAT

     LOW STOCK
  • Align 500E PRO Main Gear Case Set

    Align 500E PRO Main Gear Case Set

    500E PRO Main Gear Case Set

    One-way bearing HF1012
    Main gear case x 1
    Hex socket salf tapping screw x 4(T3x6mm)
    One-way bearing shaft x 1
    Washer x 1

    SKU: H50003
    €28.90
    inc. VAT

     LOW STOCK
  • Align 500PRO Carbon Stabilizer/1.6mm

    Align 500PRO Carbon Stabilizer/1.6mm

    Align 500PRO Carbon Stabilizer/1.6mm

    Includes:

    Carbon horizontal stabilizer x 1
    Carbon vertical stabilizer x 1
    Vertical stabilizer mount x 1
    Weight:11g

    SKU: H50031AT
    €14.90
    inc. VAT

     72HR STOCK
  • Align 5045 Propeller, black

    Align 5045 Propeller, black

    Align 5045 Propeller, black, for MR25 / MR25P

    Content

    • 4x 5 Inch Propeller (R) (5x126.81x6.45mm)
    • 4x 5 Inch Propeller (L) (5x126.81x6.45mm)
    SKU: MP05031A
    €5.00
    inc. VAT

     LOW STOCK

Manufacturers