AlignRc

AlignRc

producer of famous T-Rex helicopters

Products


  • 800E APS Mount

    800E APS Mount

    700E ESC Mount × 1(65.2x62x2mm) 800E ESC Mount × 1(102x65.2x2.5mm)

    SKU: H80B007
    €15.99
    inc. VAT

     72HR STOCK
  • 800E Auxiliary Battery Bottom Plate Set

    800E Auxiliary Battery Bottom Plate Set

    Must with H80T010XXT 800E Auxiliary battery mount set.

    Specification:

    • Auxiliary Battery Board (120x50x2mm) x 2

    SKU: H80T012
    €20.99
    inc. VAT

     LOW STOCK
  • 800E Auxiliary battery mount

    800E Auxiliary battery mount

    Specially designed auxiliary battery mount set to balance the helicopter when gimbal system is used, provides proper CG for better flight stability.

    Dedicated APS sensor unit mounting platform to simplify installation.

    Specification: Auxiliary Battery Board (100x40x2mm) x 2 Auxiliary Battery Mount Side Plate (100x19x2mm) x 2 Auxiliary Battery Boom Clamp– Left (58x8x59mm) x1 Auxiliary Battery Boom Clamp– Right (58x8x60mm) x1 Auxiliary Battery Boom Clamp(GPS) – Left ( 58x8x61mm ) x1 Auxiliary Battery Boom Clamp(GPS) – Right ( 58x8x62mm ) x1 GPS Mounting Plate (41x12x14mm) x1 GPS Mounting Mast (30x38x3.5mm) x1 Flat Head Socket Cap Screw (M2.5x6mm) x16 Socket collar screw(M3x20mm) x1 Socket collar screw(M2.5x8mm) x1 Strap x 2 Hook & Loop fastening tape x 4

    SKU: H80T010
    €65.99
    inc. VAT

     LOW STOCK
  • 800E Carbon Tail Control Rod

    800E Carbon Tail Control Rod

    Tail Control Guide sleeve × 1
    Carbon Tail Control Rod sleeve × 2
    Carbon Tail Control Rod × 1(Φ5x902.3mm)
    Linkage Rod C × 2(Φ2.5x23mm)
    700NFL Ball Link × 2
    SKU: H80T006
    €17.00 €21.90
    inc. VAT

     72HR STOCK
  • 800E DFC Linkage Rod

    800E DFC Linkage Rod

    800E DFC Linkage rod A × 4(M3x29.3mm)
    Elevator ball link × 4
    Linkage rod holder × 4(Φ6xΦ4.85x3mm)
    SKU: H80Z001
    €8.00 €8.95
    inc. VAT

     IN STOCK
  • 800E DFC Main Shaft

    800E DFC Main Shaft

    800E DFC main shaft × 2(Φ12x204.1mm )
    Socket collar screw × 1(M4x24mm)
    Socket collar screw × 1(M4x27mm)
    Socket screw × 2(M4x8mm)
    M4 Nut × 2(M4)
    Main shaft spacer(0.8) × 1(Φ12xΦ16x0.8mm)
    Main shaft spacer(0.5) × 1(Φ12xΦ16x0.5mm)
    SKU: H80H001
    €18.00 €19.90
    inc. VAT

     72HR STOCK
  • 800E Elevator Arm Set

    800E Elevator Arm Set

    Elevator arm × 1(55.3x25.4x21mm)
    Elevator lever × 1(5x21x24.5mm)
    Elevator collar × 2(Φ3xΦ4.5x1.5mm)
    Bearing HF683ZZ × 2(Φ3xΦ7x3mm)
    Elevator ball link × 1
    Linkage ball B(M3x4) × 2(Φ5x12mm)
    M4 Set screw × 1(M4x4mm)
    Socket button head screw × 2(M3x8mm)
    Socket screw × 1(M3x8mm)
    SKU: H80B004
    €35.90 €39.90
    inc. VAT

     72HR STOCK
  • 800E Metal Bottom Plate

    800E Metal Bottom Plate

    • 800E Metal Bottom Plate × 1(266x65x7.6mm)
    • Socket button head screw × 6(M3x6mm)
    • Socket screw × 4(M3x10mm)

    SKU: H80B008X
    €41.00
    inc. VAT

     LOW STOCK
  • 800E Metal Stabilizer Belt

    800E Metal Stabilizer Belt

    800E Metal stabilizer belt(U) × 1(35x13x15.1mm)
    800E Metal stabilizer belt(L) × 1(35x13x15.1mm)
    Socket collar screw × 2(M3x22mm)
    Socket screw × 2(M4x12mm)
    M4 Washer × 2(Φ4xΦ10x1mm)
    M3 Specialty washer × 2(Φ3xΦ8x2mm)
    SKU: H80T002
    €15.00 €16.90
    inc. VAT

     LOW STOCK
  • 800E Metal Tail Torque Tube Unit

    800E Metal Tail Torque Tube Unit

    • Metal plate(L) × 1
    • Metal plate( R) × 1
    • Metal tail unit set × 1
    • Tail rotor shaft assembly × 1
    • Long umbrella gear × 1(Φ12x8.2mm)
    • Bushing × 1(Φ12.4xΦ18x10mm)
    • Bearing MR126ZZ × 2(Φ6xΦ12x4mm)
    • Bearing 6701ZZ × 2(Φ12xΦ18x4mm)
    • Socket screw × 2(M3x26mm)
    • Socket screw × 4(M3x6mm)
    • Socket collar screw × 1(M3x22mm)
    • M3 Specialty washer × 2(Φ3xΦ8x2mm)
    • Vertical stabilizer mount × 1

    SKU: H80T003X
    €80.00
    inc. VAT

     LOW STOCK
  • 800E PRO Landing Skid / Black

    800E PRO Landing Skid / Black

    Use for T-REX 700E DFC / 700N DFC / 800E DFC

    Content

    • 2x 800E PRO Landing skid
    • 2x Skid Pipe
    • 4x Skid Pipe End Cap
    • 4x M3 Set Screw (M3x4mm)
    • 4x M3 Washer (3x8x1mm)
    • 4x Socket screw (M3x10mm)
    • 4x Landing Skid Nut (7.8x16x17mm)
    SKU: H80F003XAT
    €39.90
    inc. VAT

     LOW STOCK
  • 800E Tail Boom Mount

    800E Tail Boom Mount

    800E Tail boom mount(Left) × 1
    800E Tail boom mount(Right) × 1
    Hex mounting bolt × 4(Φ2.5x60.9mm)
    Socket screw × 1(M4x8mm)
    Socket button head collar screw × 8(M3x8mm)
    SKU: H80T001XXW
    €20.00 €21.90
    inc. VAT

     LOW STOCK
  • 800E Tail Control Guide

    800E Tail Control Guide

    T-Rex 800E Tail Control Guide
    SKU: H80T009XXT
    €8.49
    inc. VAT

     LOW STOCK
  • 800E Torque Tube

    800E Torque Tube

    Torque tube × 1(Φ8x918mm)
    Bearing MR148ZZ × 2(Φ8xΦ14x4mm)
    Torque Tube Bearing Holder × 2
    SKU: H80T011
    €18.00 €19.90
    inc. VAT

     72HR STOCK
  • 800E Torque Tube Bearing Holder

    800E Torque Tube Bearing Holder

    Torque Tube Bearing Holder × 2(Φ14xΦ22x13mm)
    Bearing MR148ZZ × 2(Φ8xΦ14x4mm)
    SKU: H80T007
    €12.00 €13.90
    inc. VAT

     LOW STOCK
  • 800MX Brushless Motor(440KV)

    800MX Brushless Motor(440KV)

     800MX Brushless Motor(440KV)

    Product info HML80M04T
    Instructions:

    •  To meet the power and torque requirements of enthusiasts, the high output 800MX motor was born in Alignfs R&D lab. With dramatic increase in torque and power output, capable of 4440 watts continuous power output and 8800 watts of burst power!
    •  800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it's capable of maintaining consistent torque and head speed through continuous F3C maneuvers..
    •  Due to the 800MXfs high efficiency and low current draw, the standard equipment 120A electronic speed controller are sufficient to experience the power of this motor, and extend battery longevity.
    •  800MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    •  The 800MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
    •  Maintenance freeAhigh torqueAhigh efficiencyAstable, and low noise.
    •  Highspeed ball bearings, powerful magnetic outrunner rotor.
    •  Suitable For TREX 700E/800E F3C.


    Specification:

    •  Input Voltage:3S12S
    •  Max Continuous Current: 100A/200A(2sec)
    •  Max Output Power: 4440W/8800W(2sec)
    •  KV Value: 440KV
    •  Stator Arms: 12
    •  Magnet Poles: 10
    •  Dimension: Spindle 6x56.7x94.5mm
    • œWeight: 508g


    Accessories:

    •  Socket screw(M4X10)X4
    •  Washer(Ø4XØ10X1)X4
    •  4mm gilt terminal x 3


    SKU: HML80M04T
    €236.00
    inc. VAT

  • 800MX Brushless Motor(520KV)

    800MX Brushless Motor(520KV)

     800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it’s capable of maintaining consistent torque and head speed through continuous 3D maneuvers.
    Due to the 800MX’s high efficiency and low current draw, the standard equipment 120A electronic speed controller are sufficient to experience the power of this motor, and extend battery longevity.
    800MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    The 800MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
    Maintenance free、high torque、high efficiency、stable, and low noise.
    High-speed ball bearings, powerful magnetic outrunner rotor.
    Suitable for T-REX 700E 、T-REX800E helicopters.

    SPECIFICATIONS

    • Input Voltage: DC11.1V-50.4V
    • Max Continuous Current: 115A/250A(2sec)
    • Max Output Power: 5100W/11000W(2sec)
    • KV Value: 520KV
    • Stator Arms: 12
    • Magnet Poles: 10
    • Shaft: 6x56.7x93.5mm
    • Weight: 508g
    SKU: HML80M01
    €229.00
    inc. VAT

     72HR STOCK
  • 90mm Carbon Fiber Tail Blade

    90mm Carbon Fiber Tail Blade

    Use for T-REX 550E。 3K carbon fiber made, new light-weight design, improve the efficiency of tail blade to make more precision on tail rudder control. Specification: Shape: Symmetrical wing Length: 90mm Width: 4.9mm Shaft Diameter: 3mm Weight: 9g/set

    SKU: HQ0900BT
    €17.00
    inc. VAT

     72HR STOCK
  • AG-300 Align FPV Goggle

    AG-300 Align FPV Goggle

    AG-300 Align FPV Goggle

    Display:

    • Resolution: 854x480 (WVGA)
    • Lightness: Adjustable
    • Contrast: Adjustable
    • Saturation: Adjustable
    • View Angle: 30°(horizontal)

    Receiver:

    • Antenna Port: RP-SMA
    • Frequency: 5.8G Dual diversity input
    • 32channel can be chosen
    • Auto switch to the best signal channel
    • Auto Search: Yes

    AG300 Recording:

    • Video: 640x320 (30FPS)
    • Storage: Micro SD Card (up to 32G)
    • Power: DC 5V/1A
    • Power Consumption: 950mA @ 5V (Maximum)
    • Working Environment: -10°C ~ +65°C

    Specification:

    • Input Voltage: DC 5V/1A
    • Size: 172x88x60mm
    • Weight(Kit only): Approx. 142g

    Content:

    • AG300 FPV Goggle x 1
    • 5.8G Circular Polarized Antenna x 2
    • FPV Goggle mini USB Wire x 1(900mm)
    • FPV Goggle Bag x 1

    Optional Equipment:

    • AV in/out Cable
    • Power Bank
    SKU: HEMFPV01
    €389.90
    inc. VAT

     72HR STOCK
  • ALIGN - Main Drive Gear/162T - TREX 500

    ALIGN - Main Drive Gear/162T - TREX 500

    For T-rex 500

    Main drive gear(162T) x 2

    SKU: H50018QA
    €13.90
    inc. VAT

     LOW STOCK
  • Align 105T M1 Helical Autorotation Tail Drive Gear Set

    Align 105T M1 Helical Autorotation Tail Drive Gear Set

    Align 105T M1 Helical Autorotation Tail Drive Gear Set

    Use for:

    • T-REX 700X/760X/800E

    Brand new high drive gear ratio is designed especially for F3C & slow 3D flight with superior tail lock and precise flight performance. (Suitable for head speed at 1900RPM)

    To make sure to get the best effect, it must be used with whole set.

    Gear Ratio 1:5.25

    Specification:

    • 105T M1 Autorotation tail drive gear set x 1
    • 20T M1 Front drive gear assembly set x 1
    SKU: H70G013XXT
    €25.99
    inc. VAT

     72HR STOCK
  • Align 106mm Carbon Fibre Tail Blades (1 pair)

    Align 106mm Carbon Fibre Tail Blades (1 pair)

    Use for:

    • T-REX 700

    Brand new tail blade designed to sustain optimal tail locking performance under high head speed and extreme flight conditions.

    Specification:

    • 106mm Carbon fibre tail blade × 1 set
    • Shape: Symmetrical wing
    • Width: 4.95 ± 0.1mm
    • Bolt Hole Diameter: 3mm
    • Weight: Approx 6.5g/set
    SKU: HQ1060AT
    €26.99
    inc. VAT

     LOW STOCK
    NEW
  • Align 130T Autorotation Tail Drive Gear

    Align 130T Autorotation Tail Drive Gear

    Use for:

    • T-REX 500XT

    Content:

    • 1x 500XT Autorotation tail drive gear (M0.7)
    SKU: H50G010XXT
    €7.99
    inc. VAT

     72HR STOCK
  • Align 150M Main Motor Set (9000KV/1107)

    Align 150M Main Motor Set (9000KV/1107)

    Align 150M Main Motor Set (9000KV/1107)

    Use for:

    • T-REX 150X

    Specifications:

    • Input voltage: 2S
    • KV value: 9000KV
    • Stator Dimension:1107
    • Stator Arms: 9
    • Magnet Poles: 6
    • Dimension: 1.5x13.7x21mm
    • Weight: 6.5g

    Accessories:

    • Main Motor set x 1
    • Socket Button Head Screw x 2(#0-80x3mm)

     

     

    SKU: HML15M03T
    €22.99
    inc. VAT

     72HR STOCK

Manufacturers