Align T-Rex 450L

Products


  • 450L Vertical Yellow flourescence Stabilizer

    450L Vertical Yellow flourescence Stabilizer

    Use for T-REX 450 L. 
     
    Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.

    Specification:  

    • 450L Vertical stabilizer x 1
    • Vertical stabilizer mount x 1
    • Socket screw x 2 (M2x18mm)
    SKU: H45T006XYT
    €14.99
    inc. VAT

     72HR STOCK
  • Align 35A RCE-BL35P Brushless ESC

    Align 35A RCE-BL35P Brushless ESC

    BEC output voltage(5~6V) to show great performance on the torque & speed of servo.
    Three programmable throttle speed settings to support quick throttle response.
    Govener Mode(governor speed controller、slow down system).
    Small and compact PCB design for ease of installation.
    Large heatsink for great thermal performance.
    High compatibility to work with 98% brushless motors in the market.
    Ultra smooth motor start design to run with all kinds of brushless motors.
    The power inlet adapts Japanese made "Low ESR" capacitor in order to provide stable power source.
    T BEC power outlet adapts a Japanese made specialty polymer aluminum electrolytic capacitor. It porvides better noise filtering capability than other BL ESC in the market, and moreover to give more stable performance of R/C receiver and BEC.
    Users can use the transmitter to operate the motor setting by Super stylized CPU.
    If the aircraft should land or crash in an unexpected location and become lost, the pilot can enable the Aircraft Locator Option. The Aircraft Locator Option is engaged by tuming off the transmitter. When the ESC does not receive a signal from the transmitter for 30 seconds, it will start to send an alarm to the motor. The sound of the alarm will aid the pilot to locate the aircraft. This option will not work with a PCM receiver that has SAVE function enabled, or with low noise resistant PM receivers.

    Specification:

    Continuous current:35Amps
    Surge current:45Amps for 15seconds
    Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
    Supporting maximum RPM:2poles=>190,000rpm
    Supporting input voltage:5.5V~16.8V
    Supporting battery types: Li-ion/ Li-poly 2~4 cells, Ni-Mh 6-12 cells
    BEC output: 5~6V,current 3A
    Size:58X22X11mm
    Weight:30g

    SKU: HES35P01
    €42.95
    inc. VAT

     72HR STOCK
  • Align 360mm 3G Carbon Fiber main Blades

    Align 360mm 3G Carbon Fiber main Blades

    - Apply to Trex450 all types
    - The 360 3G main blades are designed specifically for extreme 3D flying, featuring both high agility and excellent stability characteristics. The blades have brand new airfoil design, coupled with new painted graphics. In addition, the blades rigidity have been increased for better anti-torsion characteristics during flight. The new airfoil design effectively minimizes turbulence at the blade tips, reducing blade noise and power loss.

    SKU: HD360AT
    €24.00
    inc. VAT

     LOW STOCK
  • Align 450 Blade Clips

    Align 450 Blade Clips

    Use for Dominator 450L.

    Must with 450 Metal Tail Rotor Holder(H45T002XX).

    The material of Rotor Clips for main/tail blades are high strength composite plastic steel, providing bigger contact area between clip and blade, not only increase its grab reinforcement and rotation smoothly, but also avoid the scratches from the rotor holder rubbing against painting surface of blade causing expected vibration in flight.
     

    • 450 Main Blade Clips x 8
    • 450 Tail Blade Clips x 8
    SKU: H45H008
    €6.00
    inc. VAT

     72HR STOCK
  • Align 450 Dominator M2 socket collar screw

    Align 450 Dominator M2 socket collar screw

    • Socket collar screw × 4(M2x12mm)
    • Washer × 4(Φ2xΦ3.6x0.2mm)
    SKU: H25125
    €2.90
    inc. VAT

     72HR STOCK
  • Align 450/470 Dominator Landing Skid-Fluorescence Orange

    Align 450/470 Dominator Landing Skid-Fluorescence Orange

    Use for Align 450/470 Dominator/ Pro.

    • Landing skid x 1
    • Washer x 2(2.6x5.8x0.6mm)
    • Socket button head screw x 2(M2.5x10mm)
    SKU: H45050QM
    €8.90
    inc. VAT

     LOW STOCK
  • Align 450L Dominator Painted Canopy

    Align 450L Dominator Painted Canopy

    Use for:

    • T-REX 450L

    After performing many tests to determine the most efficient aerodynamic canopy we are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass fiber is lightweight and achieves best dinamic performance. Also a new unique painting scheme for the newest member of the T-REX family.

    Content:

    • GF painted canopy x 1
    • Canopy nut x 2
    • Weight: Approx. 38.5g
    SKU: HC4357T
    €27.00
    inc. VAT

     72HR STOCK
  • Align 450L Speed Fuselage – Red & White

    Align 450L Speed Fuselage – Red & White

    Speed Fuselage – Red & White designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – Red & White
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4508
    €73.99
    inc. VAT

     72HR STOCK
  • Align 450L Speed Fuselage – Red & Yellow

    Align 450L Speed Fuselage – Red & Yellow

    Speed Fuselage – Red & Yellow designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – Red & Yellow
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4506
    €73.99
    inc. VAT

     72HR STOCK
  • Align 450L Speed Fuselage – White & Blue

    Align 450L Speed Fuselage – White & Blue

    Speed Fuselage – White & Blue designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – White & Blue
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4509
    €73.99
    inc. VAT

     72HR STOCK
  • Align 450L Speed Fuselage – Yellow & Blue

    Align 450L Speed Fuselage – Yellow & Blue

    Speed Fuselage – Yellow & Blue designed by Align and suitable for T-REX 450L

    Utilizing wrap-around aerodynamic design, the brand new 450L Speed Fuselage has an attention grabbing unique curve. Its tail section is wrapped with painted carbon fiber shell, resulting in superior visibility in mid-air, and further enhance the beauty of highly difficult maneuvers. The low aerodynamic drag enables high speed flights to be easily achievable. In addition, the ergonomic design simplifies installation; just a few simple steps with few screws to complete the install, easily outfitting your helicopter with a beautiful body.

    Specifications:

    • Body length:645mm
    • Body width:87mm
    • Body high:155mm
    • Weight:Approx. 107g

    Includes:

    • 450L Speeed Fuselage – Yellow & Blue
    • 450L Speeed Fuselage Main Blade Holder x 1
    • Canopy nut x 2
    • Socket screw x 2(M2x20mm)
    • Socket button head screw × 2(M2.5x6mm)
    • Socket button head screw × 2(M2.5x10mm)
    • M2.5 Special Washer x 4(Φ2.5xΦ6x2mm)

    SKU: HF4507
    €73.99
    inc. VAT

     72HR STOCK
  • Align 460MX Brushless Motor 6s 1800KV

    Align 460MX Brushless Motor 6s 1800KV

    Align 460MX Brushless Motor(1800KV)

    1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    3.Even for the none 3D pilots, 460MX 6S motor utilizes less than 5 amps at hover. Not only does this require smaller C-rating packs, the lower temperature extends the battery life at the same time. Charging time basically is cut in half. These advantages makes this an ideal motor for just about everyone.
    4.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    5.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
    6.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
    7.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
    8.Suitable for T-REX 450E series,Must with RCE-BL45X Brushless ESC(Governer Mode)(HES45X01).

    Specification:
     

    • Input voltage:6S
    • Max continuous current:30A/45A(5sec)
    • Max output power:Approx. 650w/970W(5sec)
    • KV value:1800KV
    • Dimension:spindle 3.5x29.2x38mm
    • Weight:Approx. 87g

    Accessories:

    • Socket button head screw(M2.5X6mm) x 2
    • Washer(Φ2.6XΦ5.8X0.6mm) x 2
    • ALIGN standard 3mm gilt terminal x 3set
    SKU: HML46M01T
    €55.00
    inc. VAT

     72HR STOCK
  • Align Brushless Motor 460 MX 3200 KV

    Align Brushless Motor 460 MX 3200 KV

    Align 460MX Brushless Motor 3200KV

    1.Continuation of Align over 25 years motor core technical knowledge and craft, based on 3s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor
    2.As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    3.The 460MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    4.The 460MX motor armature had a special balance adjust to improve the serious shaking problem that other tiny motors have.
    5.Maintenance free, high torque, high efficiency, low temperature variant, stable and quiet.
    6.Japanese made high-speed ball bearings, powerful magnetic outrunner rotor.
    7.Suitable for T-REX 450E series.

    Specification:

    • Input voltage:3S
    • Max continuous current:46A/68A(5sec)
    • Max output power:Approx. 500w/730W(5sec)
    • KV value:3200KV
    • Dimension:spindle 3.5x29.2x38mm
    • Weight:Approx. 87g
    Accessories:

    • Socket button head screw(M2.5X6mm) x 2
    • Washer(Φ2.6XΦ5.8X0.6mm) x 2
    • ALIGN standard 3mm gilt terminal x 3set
    SKU: HML46M02T
    €55.00
    inc. VAT

     72HR STOCK
  • Align Dominator 450/470 Landing Skid-Fluorescence Yellow

    Align Dominator 450/470 Landing Skid-Fluorescence Yellow

    Use for Dominator 450/470/Pro.

    • Landing skid x 1
    • Washer x 2 (2.6x5.8x0.6mm)
    • Socket button head screw x 2(M2.5x10mm)
    SKU: H45050QY
    €8.90
    inc. VAT

     LOW STOCK
  • Align RCE-BL100A Brushless ESC

    Align RCE-BL100A Brushless ESC

    Align RCE-BL100A Brushless ESC

    Instructions:

    • 32-bit fast-speed processor.
    • High quality MOSFET.
    • Adjustable BEC function, supply power to receiver and servos.
    • Superior governor feature.
    • Support 730MX Brushless Motor, Extreme 3D Flight.
    • Support USB interface to PC for firmware updating.

    Specification:

    • Supporting input voltage: 3~6S Lipo / 11.1V~22.2V
    • Continuous current: 100A
    • Surge current: 170A
    • BEC output voltage: 5~8V
    • BEC output current: Continuous 10A / Surge 25A
    • Size: 78.5x38.1x21mm
    • Weight: 138g

    Accessories:

    • 100A Brushless ESC x 1
    • Brushless ESC Fan x 1
    SKU: HES10001
    €132.00
    inc. VAT

     LOW STOCK
    NEW
  • Align Skid Pipe

    Align Skid Pipe

    Use for T-REX 450 / L / PRO.

    6061-T6 Aluminum alloy material and CNC processed.
    Use for T-REX 450.
    Must with 450 Metal Tail Rotor Holder(H45T002XXW).

    Specification:

    • Skid pipe x 2(Φ5.5x180mm)
    • Skid pipe end cap x 4
    SKU: H45108
    €4.50
    inc. VAT

  • Align T-rex 450 Dominator Multiple Main Shaft Bearing Block

    Align T-rex 450 Dominator Multiple Main Shaft Bearing Block

    Align T-rex 450 Dominator Multiple Main Shaft Bearing Block

    SKU: H45B013XX
    €21.00
    inc. VAT

     72HR STOCK
  • Align T-Rex 450 Dominator Tail Rotor Hub

    Align T-Rex 450 Dominator Tail Rotor Hub

    Align T-Rex 450 Dominator Tail Rotor Hub

    Use for T-REX 450 L and Dominator

    6061-T6 Aluminum alloy material and CNC processed.

    Must with 450 Metal Tail Rotor Holder(H45T002XXW).

    Specification:

    • 6061-T6 Aluminum alloy material and CNC processed.
    • Use for T-REX 450.
    • Must with 450 Metal Tail Rotor Holder(H45T002XXW).
    • 450Tail rotor hub x 2
    • Washer(Φ2xΦ4.8x0.6mm) x 2
    • Washer(Φ3xΦ4.8x0.3mm) x 2
    • M3 set screw x 2(M3x3mm)
    • Socket collar screw x 2(M2x6mm)
    • Weight:6.01g


    SKU: H45T003
    €6.00
    inc. VAT

     72HR STOCK
  • Align T-Rex 450L Dominator Painted Canopy

    Align T-Rex 450L Dominator Painted Canopy

    Use for:

    • T-REX 450L.

    After performing many tests to determine the most efficient aerodynamic canopy, Align are pleased to release this brand new lightweight canopy! This ultimate canopy made of glass fiber is lightweight and achieves best dinamic performance. Also a new unique painting scheme for the newest member of the T-REX family.

    Specification:

    • GF painted canopy x 1
    • Canopy nut x 2
    • Weight: Approx. 38.5g
    SKU: HC4356T
    €27.99
    inc. VAT

     72HR STOCK
  • Align T-Rex 450L Dominator Painted Canopy (Green/White/Blue)

    Align T-Rex 450L Dominator Painted Canopy (Green/White/Blue)

    Align T-Rex 450L Dominator Painted Canopy (Green/White/Blue)

    Use for:

    • T-REX 450L

    Specification:

    • GF painted canopy x 1
    • Canopy nut x 2
    SKU: HC4355
    €29.99
    inc. VAT

     72HR STOCK
  • Ball Link

    Ball Link

    Use for T-REX 450 L / SE / V2 / PRO.

    Ball link x 12(11x2.3mm)

    SKU: H45045
    €3.90
    inc. VAT

     LOW STOCK
  • Feathering Shaft Set

    Feathering Shaft Set

    Feathering Shaft Set for T-Rex 450 Dominator

    SKU: H45H005XX
    €9.90
    inc. VAT

     72HR STOCK
  • Feathering Shaft Wrench

    Feathering Shaft Wrench

    6061-T6 Aluminum alloy material and CNC processed. Using on T-REX 450pro / 450sport / 500

    SKU: HOT00004T
    €14.00
    inc. VAT

     72HR STOCK
  • Landing Skid T-Rex 450L/470L

    Landing Skid T-Rex 450L/470L

    Use for T-REX 450 / L / PRO/470.

    Specification:

    • Landing skid x 1
    • Washer x 2(Φ2.6xΦ5.8x0.6mm)
    • Socket button head screw x 2(M2.5x10mm)
    SKU: H45050
    €8.90 €9.00
    inc. VAT

     LOW STOCK

Manufacturers

Back