Agile Helicopter

The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
Agile is agility AND quality, you can’t go wrong!
 
Required to fly:

• Main Blades: 550mm
• Tail Blades: 85mm-95mm
• Motor: 1100-1200Kv
• ESC: 90A-120A / 6s
• 3x Cyclic servos
• 1x Rudder servos
• Flybarless System
• 1x Lipo 5000 6S 45C
• Transmitter and receiver

 Specifications:

• Length: 1120mm
• Height: 350mm
• Width: 176mm
• Main Rotor Diameter: 1250mm
• Main Blade Length: 550mm
• Tail Rotor Diameter: 260mm
• Tail Blade Length:92mm
• Motor Pinion Gear: 21T
• Motor KV: 1100KV
• Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
• Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16

The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
Agile is agility AND quality, you can’t go wrong!
 
Required to fly:

• Main Blades: 550mm
• Tail Blades: 85mm-95mm
• Motor: 1100-1200Kv
• ESC: 90A-120A / 6s
• 3x Cyclic servos
• 1x Rudder servos
• Flybarless System- Microbeast included
• 1x Lipo 5000 6S 45C
• Transmitter and receiver

 Specifications:

• Length: 1120mm
• Height: 350mm
• Width: 176mm
• Main Rotor Diameter: 1250mm
• Main Blade Length: 550mm
• Tail Rotor Diameter: 260mm
• Tail Blade Length:92mm
• Motor Pinion Gear: 21T
• Motor KV: 1100KV
• Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
• Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16

Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

Included items of this special combo

• Agile 5.5 Helicopter Kit
• Motor KDS 4020-1100
• ESC HV 120 LV
• 4 servos Savox ( optional upgrade to RJX servos )
• Carbon main and tail Blades
• Flybaress  controller ( optional )
  
  Specifications of the Heli:
   
• Length: 1120mm
• Height: 350mm
• Width: 176mm
• Main Rotor Diameter: 1250mm
• Main Blade Length: 550mm
• Tail Rotor Diameter: 260mm
• Tail Blade Length:92mm
• Motor Pinion Gear: 21T
• Motor KV: 1100KV
• Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
• Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16

This is the Agile 7.2 Super combo

Main advantages:

•   CNC Spiral bevel gears ,
•   Oversized Full Carbon Boom Dia 30 mm
•   Hyper Rigid carbon frame
•   Two Stages Gears
•   Torque Tube
•   Direct Servo Drive

  Included:(choice of brand depends on availability, upgrade to other products possible with difference of price)

  ESC :HOBBYWING or Scorpion ESC 160/200amp
  Motor :Scorpion HKIII 4035 or equivalent
  Blades : 710mm
  Tail Blades: MAH 115
  3x Cyclic Servo: KST or Savox 1257/8
  1x Tail Servo : KST or savox 1290
  Flybarless Module : Vbar Neo, or beastX

This is the Agile 7.2 Dominator Super combo, HIGH VOLTAGE servo, and High voltage performance- only for Adrenaline seekers ...

Main advantages:

• CNC Spiral bevel gears ,
• Oversized Full Carbon Boom Dia 30 mm
• Hyper Rigid carbon frame
• Two Stages Gears
• Torque Tube
• Direct Servo Drive

Included:(choice of brand depends on availability, upgrade to other products possible with difference of price)

ESC :160/200 AMP,  Scorpion or Hobbywing

Motor : Scorpion HK 5020-450 or Kontronik Pyro 750

Blades : 710mm Rotortech, edge,mah

Tail Blades: MAH 115

3x Cyclic Servo: High voltage Savox 1257/8TG or KST

1x Tail Servo : KST or SAVOX

Flybarless Module : Vbar neo, beastX, Bavarian 3X

Agile 7.2 kit with free microbeast. limited offer for.

was designed to offer something different; not just an improvement but a head start over what is commonly done. Agile 7.2 was created to fit each type of flight: Low to high speed, soft to hard 3D maneuvers and those not yet imagined!
Clever solutions were used to provide top-notch performance with very responsive controls, thus giving a feeling of incredible strength and outstanding smoothness of motion.
To make sure that nothing is left to chance, and to bring you the best overall design around, hundreds of test flights were performed by top international pilots.
Whatever story it is, the following sums it up: Agile stands for Agility!

Main advantages:

• CNC Spiral bevel gears ,
• Oversized Full Carbon Boom Dia 30 mm
• Hyper Rigid carbon frame
• Two Stages Gears
• Torque Tube
• Direct Servo Drive
   
• Required components ( Not included)
   
• ESC : 120-160 A
• Motor Type BL4725-540
• Main Blades 690-720 MM
• Tail Blades 105-115 MM
• 3x Cyclic Servo
• 1x Tail Servo
• 2x Battery  (5000 - 6S )

Agile 7.2 was designed to offer something different; not just an improvement but a head start over what is commonly done. Agile 7.2 was created to fit each type of flight: Low to high speed, soft to hard 3D maneuvers and those not yet imagined!
Clever solutions were used to provide top-notch performance with very responsive controls, thus giving a feeling of incredible strength and outstanding smoothness of motion.
To make sure that nothing is left to chance, and to bring you the best overall design around, hundreds of test flights were performed by top international pilots.
Whatever story it is, the following sums it up: Agile stands for Agility!

Main advantages:

• CNC Spiral bevel gears ,
• Oversized Full Carbon Boom Dia 30 mm
• Hyper Rigid carbon frame
• Two Stages Gears
• Torque Tube
• Direct Servo Drive
  
  Required components ( Not included):
   
• ESC : 120-160 A
• Motor 700-800 size
• Main Blades 690-720 MM
• Tail Blades 105-115 MM
• 3x Cyclic Servo
• 1x Tail Servo
• 2x Battery  (5000 - 6S )
• Flybarless Module
• Radio, Charger