Agile-Helicopter (KDS)

Agile-Helicopter (KDS)

Products


  • Frame spacer Agile7.2

    Frame spacer Agile7.2

    Frame columns x6
    Cup head socket head screwX10 M3X8
    Set screwsX1 M3x12
    For Agile7.2

    SKU: KA-72-060
    €8.00
    inc. VAT

     IN STOCK
  • Frame universal joint drive shaft Agile7.2

    Frame universal joint drive shaft Agile7.2

    Frame driving shaft Agile7.2

    SKU: KA-72-051
    €7.00
    inc. VAT

     IN STOCK
  • Front drive shaft mount

    Front drive shaft mount

    Front drive shaft mount

    • Drive shaft mount X 1
    • Bearing x 1 (5x10x4mm)
    • Socket head screw X 4 M3X8

    Agile 5.5 Parts

    SKU: KA-72-046
    €5.90
    inc. VAT

     LOW STOCK
  • Front drive spiral bevel gear Agile 7.2

    Front drive spiral bevel gear Agile 7.2

    Front drive spiral bevel gear
    Use for AGILE 7.2 helicopters

    SKU: KA-72-030
    €15.00
    inc. VAT

     IN STOCK
  • Gear hub Agile 7.2

    Gear hub Agile 7.2

    Gear hub x1
    Cup head socket head screw x1 M4X25
    Countersunk head socket head screw x5 M3X6
    lock nut x1 M4
    Square keyX1
    For Agile 7.2

    SKU: KA-72-067
    €29.00
    inc. VAT

     IN STOCK
  • KDS Agile 7.2 700-Size Electric Helicopter Kit- Special offer

    KDS Agile 7.2 700-Size Electric Helicopter Kit- Special offer

    Agile 7.2 was designed to offer something different; not just an improvement but a head start over what is commonly done. Agile 7.2 was created to fit each type of flight: Low to high speed, soft to hard 3D maneuvers and those not yet imagined!
    Clever solutions were used to provide top-notch performance with very responsive controls, thus giving a feeling of incredible strength and outstanding smoothness of motion.
    To make sure that nothing is left to chance, and to bring you the best overall design around, hundreds of test flights were performed by top international pilots.
    Whatever story it is, the following sums it up: Agile stands for Agility!

    Main advantages:

    • CNC Spiral bevel gears ,
    • Oversized Full Carbon Boom Dia 30 mm
    • Hyper Rigid carbon frame
    • Two Stages Gears
    • Torque Tube
    • Direct Servo Drive

      Required components ( Not included):
       
    • ESC : 120-160 A
    • Motor 700-800 size
    • Main Blades 690-720 MM
    • Tail Blades 105-115 MM
    • 3x Cyclic Servo
    • 1x Tail Servo
    • 2x Battery  (5000 - 6S )
    • Flybarless Module
    • Radio, Charger
    SKU: Agile72
    €579.00
    inc. VAT

     LOW STOCK
  • KDS Agile 7.2 Fbl Cf 690mm Heli Main Blades

    KDS Agile 7.2 Fbl Cf 690mm Heli Main Blades

    690MM CARBON BLADES

    SKU: Star-690-01
    €69.00
    inc. VAT

     LOW STOCK
    NEW
  • KDS Agile Aluminium Servo Arm (pack of 3) 2004-5-25T

    KDS Agile Aluminium Servo Arm (pack of 3) 2004-5-25T

    KDS Agile Aluminum Servo Arm (pack of 3) 2004-5-25T

    • Specially designed to work with KDS standard size servos,
    • Compatible with Futaba, Savox, Align etc standard size servos
    • Side lock in with high strength screw to ensure a perfect fit
    • Ball mount holes distance from center: 18mm 21mm 24mm
    SKU: 2004-5-25T
    €16.00
    inc. VAT

  • KDS Agile BL4020-1100KV Brushless Motor 550 Class

    KDS Agile BL4020-1100KV Brushless Motor 550 Class

    KDS BL4020-1100KV Brushless Motor For Agile 5.5 or other 550 class helicopter with 6S setup

    Specs:

    • Kv Value: 1100Kv
    • Number of Poles: 10P
    • Stator diameter: 41mm
    • Stator Thickness: 22mm
    • Stator-arm: 12
    • Coil number: 5 Turn Delta
    • No Load Current (lo/20v): 5.4A
    • Motor Resistance: 0.007Ω
    • The maximum continuous output current: 800A
    • Maximum continuous power: 1700W
    • Motor diameter: 50mm
    • Shaft diameter: 6.0mm
    • Motor length: 48.5mm
    • Temperature: «130 ℃
    • Peak temperature: «180 ℃
    • Correspondence ESC: »60A
    • Correspondence battery: Lipo 5-8s
    • Weight: 315g
    • Timing: 10
    SKU: BL4020-1100KV
    €159.00
    inc. VAT

  • KDS Agile FBL Main Rotor Head Block Housing (V2)

    KDS Agile FBL Main Rotor Head Block Housing (V2)

    KDS Agile FBL Main Rotor Head Block Housing (V2)

    SKU: KA-72-092
    €43.99
    inc. VAT

     LOW STOCK
  • KDS Front Spiral Bevel Gear Agile 7.2

    KDS Front Spiral Bevel Gear Agile 7.2

    KDS Front Spiral Bevel Gear Agile 7.2

    Agile 7.2 Parts

    SKU: KA-72-029
    €18.00
    inc. VAT

     IN STOCK
  • Landing gear Agile 7.2

    Landing gear Agile 7.2

    Landing gear struts x 2
    Agile 7.2

    SKU: KA-72-044
    €5.00
    inc. VAT

     IN STOCK
  • Landing gear mount

    Landing gear mount

    Landing skid mount x 2

    • Socket head screw x 4 m3X8
    • Socket head screw x 6 m3X10
    • Socket head screw x 2  M3X14

    Agile 5.5 & 7.2 Parts

    SKU: KA-72-045
    €7.90
    inc. VAT

  • Landing gear pipe Agile 7.2

    Landing gear pipe Agile 7.2

    Landing gear pipe x 2 for Agile 7.2

    SKU: KA-72-043
    €5.00
    inc. VAT

     IN STOCK
  • Linkage Ball Set Agile7.2

    Linkage Ball Set Agile7.2

    Linkage Ball Set Agile7.2

    SKU: KA-72-064
    €8.00
    inc. VAT

     LOW STOCK
  • Linkage rod Agile7.2

    Linkage rod Agile7.2

    linkage rod
    For Agile7.2

    SKU: KA-72-063
    €4.00
    inc. VAT

     IN STOCK
  • Main blade holder 5.5-7.2 heli

    Main blade holder 5.5-7.2 heli

    Main blade holder 5.5-7.2 heli

    Agile 5.5/7.2 Parts

    SKU: KDS550-70TTS
    €4.00
    inc. VAT

     LOW STOCK
    NEW
  • Main Block Spacer

    Main Block Spacer

    Frame Spacer column x3
    Cup head socket head screw x3 M4X55

    Use for Agile 7.2

    SKU: KA-72-012
    €6.00
    inc. VAT

     IN STOCK
  • Main Shaft Agile 7.2

    Main Shaft Agile 7.2

     Main Shaft (X2) for Agile 7.2

    SKU: KA-72-013
    €18.00
    inc. VAT

     IN STOCK
  • Main Shaft Stopper Agile7.2

    Main Shaft Stopper Agile7.2

    Main Shaft Stopper x2
    Set screws x2
    For Agile7.2

    SKU: KA-72-016
    €5.00
    inc. VAT

     LOW STOCK
  • Motor Pulley 18T Agile7.2

    Motor Pulley 18T Agile7.2

    Motor gear x1
    Set screws x2 M4X4
    For Agile7.2

    SKU: KA-72-024
    €10.00
    inc. VAT

     LOW STOCK
  • Motor Pulley 19T Agile 7.2

    Motor Pulley 19T Agile 7.2

    Motor Pulley 19T Agile 7.2

    Motor gear x1
    Set screws x2 M4X4
    For Agile7.2

    SKU: KA-72-025
    €7.90
    inc. VAT

     LOW STOCK
  • Motor Pulley 19T, Wider version,  Agile 7.2 upgrade

    Motor Pulley 19T, Wider version, Agile 7.2 upgrade

    Motor Pulley 19T, Wider version,  Agile 7.2 upgrade

    New  upgrade, to be used with Wider belt and wider gears.

    Motor gear x1
    Set screws x2 M4X4
    For Agile7.2

    SKU: KA-72-025-W
    €9.90
    inc. VAT

     IN STOCK
  • Motor Pulley 20T, Wider version,  Agile 7.2 upgrade

    Motor Pulley 20T, Wider version, Agile 7.2 upgrade

    Motor Pulley 20T, Wider version,  Agile 7.2 upgrade

    New  upgrade, to be used with Wider belt and wider gears.

    Motor gear x1
    Set screws x2 M4X4
    For Agile7.2

    SKU: KA-72-023-W
    €9.90
    inc. VAT

     IN STOCK

Manufacturers