Upgrades Align T-rex 700

Upgrades Align T-rex 700

 Here you find range of aftermarket upgrades for T-rex 700 Nitro and electro

Products


  • 700 Lightweight 3D  Clamp

    700 Lightweight 3D Clamp

    Lightweight one piece tail clamp for 3D pilots, 50% lighter than the original two piece design.

    There is no horizontal tail plane mounting provision on this clamp saving weight and further reducing aerodynamic drag.

    Component weight 6.85g

    SKU: TX7T-13
    €16.00
    inc. VAT

     72HR STOCK
  • 700 M1 upgrade gears assembly

    700 M1 upgrade gears assembly

    Use for T-REX 700 Nitro Pro.

    ●M1 Main Drive Gear/164T x 1
    ●M1 Autorotation tail drive gear/104T x 1
    ●M1 Engine gear /14T x 1
    ●M1 Front drive gear assembly x 1
    ●Short umbrella gear/24T x 1
    ●700N Clutch nut x 1

    SKU: HN7021
    €25.50
    inc. VAT

     72HR STOCK
  • 700DFC Main Rotor Holder Arm

    700DFC Main Rotor Holder Arm

    Suitable for T-REX700DFC.(H70089A)
    6061-T6 Aluminum alloy material and CNC processed.

    Specification:

    Metal Main rotor holder arm x 2
    M3 CNC socket collar screw x 2(M3x24mm)
    Socket collar screw x 4(M3x6mm)
    Washer(Φ3xΦ4.8x0.3mm) x 2
    Weight:20g
    SKU: H70095
    €19.90
    inc. VAT

     72HR STOCK
  • 700DFC Main Rotor Housing

    700DFC Main Rotor Housing

    Use for T-REX700DFC.(H70089A)
    6061-T6 Aluminum alloy material and CNC processed.

    700DFC Main Rotor Housing x 1
    700N Feathering shaft sleeve x 2
    Damper Rubber x 2
    Socket Button Head Collar Screw(M4x24) x 1
    Socket button head screw(M4x8) x 2
    M4 Locking nut x 1
    Weight:46g
    SKU: H70091
    €28.90
    inc. VAT

     72HR STOCK
  • 700DFC Main Shaft

    700DFC Main Shaft

    Use for T-REX 700DFC.(H70089A) Specification: 700DFC Main shaft x 2 Socket collar screw x 1(M4x24mm) Socket buton head collar screw x 1(M4x27mm) Socket screw x 2(M4x8mm) M4 nut x 2 Weight:103g

    SKU: H70093
    €19.90
    inc. VAT

     IN STOCK
  • Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (Black)

    Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (Black)

    This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. BLACK

    Specifications:

    • Base length is 14mm
    • Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
    • Cut the Nylon Collars to require length.
    • Canopy Rubber Grommet openings diameter 7.2~7.5mm

    Includes:

    • 2x Fast Mounting Canopy Mount
    • 2x M3x20 Set Screw
    • 2x M3x16 Set Screw
    • 2x Rubber Grommet
    • 2x 7x6MM Nylon Collar
    • 2x 7x8MM Nylon Collar
    • 2x 7x10MM Nylon Collar
    SKU: HC-FMCM-B
    €22.99
    inc. VAT

     IN STOCK
  • Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

    Adaptive Fast Mounting Canopy Mount set for 500-800 size helicopters (White)

    This fast mounting set was designed for most on market 500~800 class helicopters with M3 screw holes canopy mounts. WHITE.

    Specifications:

    • Base length is 14mm
    • Add the Nylon Collars to adjust to 20mm, 22mm, 24mm,
    • Cut the Nylon Collars to require length.
    • Canopy Rubber Grommet openings diameter 7.2~7.5mm

    Includes:

    • 2x Fast Mounting Canopy Mount
    • 2x M3x20 Set Screw
    • 2x M3x16 Set Screw
    • 2x Rubber Grommet
    • 2x 7x6MM Nylon Collar
    • 2x 7x8MM Nylon Collar
    • 2x 7x10MM Nylon Collar
    SKU: HC-FMCM-W
    €22.90
    inc. VAT

     IN STOCK
  • Align T-rex 700 Main Drive Gear 164T M0.7

    Align T-rex 700 Main Drive Gear 164T M0.7

    Newly designed highly rigid 700 M0.7 main gear, manufactured through high precision CNC machining process, with wear resistant, low noise, and highly efficient energy transfer properties to dramatically increase power output
    SKU: HN7019-4T
    €16.00
    inc. VAT

     LOW STOCK
  • Align T-rex 700-800 DFC Main rotor grip arm

    Align T-rex 700-800 DFC Main rotor grip arm

    Suitable for T-REX 700-800 DFC

    SKU: H70092T
    €22.90
    inc. VAT

     LOW STOCK
  • Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition.
    Fits RJX helicopters, also can fit Align and other models 600-700 size.
    Comes with metal adapters.
    SKU: UP61066
    €34.00
    inc. VAT

     IN STOCK
  • CCPM Metal Swashplate/Silver

    CCPM Metal Swashplate/Silver

    Use for T-REX 700 Nitro Pro.

    ●CCPM metal swashplate x 1
    ●Linkage ball B(M3x4) x 7(Φ5x12mm)
    ●Bearing(6706ZZ) x 1(Φ30xΦ37x4mm)

    SKU: HN7017QF
    €41.00
    inc. VAT

     72HR STOCK
  • Clutch Liner Material - 200x12mm (4pcs)

    Clutch Liner Material - 200x12mm (4pcs)

    Made from Aftermarket High Density material , fits All clutch systems in thickness of 1 or 1.5mm
    4 pieces of 200x12mm

    Why do i need aftermarket material?

    The material used in today systems as Align, and others is very thin, around 0.8-1mm.

    After seen a lot of clutches broken in the air, we came with aftermarket material.
    The main reason for those breaking clutches is the distance between the clutch and the material.
    Example, the diameter of clutch( metal ) is 53mm, and the liner installed is 54. 1mm is free space allow the clutch to expand.
    Every technical person knows that the material which clutch made from is spring metal which expand  with turning, but it is very limited, and can expand to 0.3-0.5mm  if more space exist, the clutch risk to break.

    So if you need to change the liner, use thicker material and do the following:

    Measure the clutch and the clutch bell, lets assume the clutch is 53mm, and the bell is 56.
    If you put 1mm, it will be 54mm, so 1mm too much space- risk to break.
    If you use 1.5mm, its better, however the clutch will be tight to insert,
    In this case prepare the liner, and put manually into the clutch bell, if the clutch doesn’t go inside, please take it out and with the help of sandpaper 80-120, sand little for all the length and do the fit again.
    You need to come to the point when the clutch will enter with a little force, and will show like it turns not easy.. but still turns. At this stage, glue all and make the fit test, if needed, sand the material inside the bell .

    The result- after you start the heli first time, the clutch will show difficulty to turn, but after 2-3 flight it will “find it way” and it will have perfect fit. And it will last for very long time.

    SKU: SKU4053
    €10.00 €15.00
    inc. VAT

     IN STOCK
  • Elevator Arm Set

    Elevator Arm Set

    Elevator Arm Set for T-REX 700 Nitro Pro.

    SKU: HN7033QF
    €28.40
    inc. VAT

     72HR STOCK
  • Flybarless head RJX 90/700 12mm

    Flybarless head RJX 90/700 12mm

    Full Head for  90/700 size(12mm), Fit  helis with 12mm shaft

    AWESOME QUALITY AT THE SUPER LOW PRICE Upgrade you 700 heli to flybarless!

    This high quality Flybarless head includes all items to replace the factory flybar head. Features Dual radial bearings in the blades grips along with large Thrust Bearing to ensure smooth collect inputs when head is under flight loads. Other features include duel arms on the swash drive to provide precise adjustment of head phasing. All parts replacement parts will be available allowing crash damage to be replaced quickly to get you back in the air!

    This head can be used on other 90 Size helis that use a 12mm Main shaft, although some slight linkage modifications may be needed (longer or shorter linkage rod)

    Comes as complete set , with Swash locker and all as in the picture.Shaft Not included.
    SKU: FL700FBL
    €109.00
    inc. VAT

  • HD Tail Boom Supports T-REX700 Series

    HD Tail Boom Supports T-REX700 Series

    Lynx Heli Innovations T-REX700 Series HD Tail Boom Supports LX0265

    LX0265 is design for T-Rex 700 Electric and Nitro Helicopters

    Lynx Heli Innovations is always looking for a better way of doing things.

    The boom supports are stressed very hard during flight. With vibrations form the tail drive system and tail loads during 3D flight, the standard boom supports are a weak point on the helicopter.

    Lynx tested many systems of construction for these boom supports to ensure they were the best possible. The final solution from Lynx is a combination of high quality materials and different mechanical fixation at the ends.

    Lynx has produced a solid 6mm diameter “high pressure” (molded at several atmospheres) carbon rod that is potted with high quality epoxy into strong aluminum 7075 terminals, and then everything clamped using a M2.5mm hex cap screw.

    The combination of epoxy and clamping make the lynx boom brace durable without compromise.

    Specifications:

    • Rod material: Solid 6mm diameter “high pressure” carbon rod – a process of production that increases carbon fiber cohesion and strength
    • Terminal material: Aluminum 7075-T6
    • Terminal installation holes: 4mm
    • Screw material: Carbon steel class 12.9
    • Assembly weight: 68.76g - 2pcs


    Contains:

    • 2 x boom support assemblies
    SKU: LX0265
    €32.99
    inc. VAT

     72HR STOCK
  • Lynx Heli Innovations Rod Fine ADJ 2.7x65mm T-Rex FBL Series

    Lynx Heli Innovations Rod Fine ADJ 2.7x65mm T-Rex FBL Series

    Used for:

    • Align T-rex 700N(FBL), T-rex 700e, T-rex 600e Pro, T-rex 600N(FBL)
    • Material:
    • High Precision Tollerance CNC Part made with Titanium


    Include:

    • 2.7mm x 65mm Titaniumd rod x 4

    SKU: LX0085
    €14.90
    inc. VAT

     72HR STOCK
  • M1 Engine Gear Set/14T

    M1 Engine Gear Set/14T

    Use for T-REX 700 Nitro Pro.

    ●14T Engine gear x 1(Φ7xΦ16x40.9mm) Modulus:1
    ●Clutch nut x 1(Φ14x6mm)

    SKU: HN7037A
    €13.00
    inc. VAT

     LOW STOCK
  • M3 x 10 Button Head Frame Screws

    M3 x 10 Button Head Frame Screws

     Lynx Heli Innovations -M3 x 10 Button Head Frame Screws x 45 pcs- LX0073

    OEM Lynx production - With larger head which eliminates need for washer, making stronger frame assembly. (Can be used in all carbon frame helis)

    SKU: LX0073
    €22.99
    inc. VAT

     LOW STOCK
  • Magnetic Canopy Mount Black

    Magnetic Canopy Mount Black

    Magnetic Canopy Mount in Black

    SKU: TXF061-BK
    €6.00
    inc. VAT

  • Metal Flybar Control Arm/Black

    Metal Flybar Control Arm/Black

    Use for T-REX 700 Nitro Pro.

    ●Metal flybar control arm x 2
    ●Flybar control rod x 2(Φ5x4.5x71mm)
    ●Scoket screw x 4(M3x6mm)
    ●M4 set screw x 2(M4x4mm)

    SKU: HN7014AA
    €18.80
    inc. VAT

     72HR STOCK
  • Metal Flybar Seesaw Holder/Silver

    Metal Flybar Seesaw Holder/Silver

    Use for T-REX 700 Nitro Pro.

    ●Metal flybar seesaw holder x 1
    ●Bearing MR104ZZ x 2(Φ4xΦ10x4mm)
    ●Bearing MF105ZZ x 2(Φ5xΦ11.2xΦ10x4mm)
    ●M4 collar screw x 2(Φ5xΦ6.5x10mm)
    ●Socket button head screw x 2(M3x12mm)
    ●Washer x 4(Φ3xΦ4.8x0.3mm)

    SKU: HN7013QF
    €24.00
    inc. VAT

     72HR STOCK
  • Metal Main Rotor Holder/Silver

    Metal Main Rotor Holder/Silver

    Use for T-REX 700 Nitro Pro.

    ●Metal main rotor holder x 2
    ●Socket collar screw x 2(M5x32mm)
    ●Washer x 4(Φ10xΦ16x1mm)
    ●Bearing 6800ZZ x 4(Φ10xΦ19x5mm)
    ●Linkage ball A(M4x5) x 2(Φ5x24mm)
    ●M5 nut x 2

    SKU: HN7004QF
    €51.50
    inc. VAT

     72HR STOCK
  • Metal Main Rotor Housing/Silver

    Metal Main Rotor Housing/Silver

    Use for T-REX 700 Nitro Pro.


    ●Metal main rotor housing x 1
    ●Damper rubber x 2(Φ9.9xΦ17x7mm)
    ●Spacer x 2(Φ10.2xΦ17x21mm)
    ●Pin x 2(Φ2.5x35mm)
    ●Socket collar screw x 1(M4x24mm)
    ●M4 nut x 1

    SKU: HN7005QF
    €34.30
    inc. VAT

     72HR STOCK
  • Metal Main Shaft Bearing Block/Silver

    Metal Main Shaft Bearing Block/Silver

    Use for T-REX 700 Nitro Pro.
    ●Metal bearing holder x 2
    ●Bearing 6901ZZ x 2(Φ12xΦ24x6mm)
    ●Socket button head collar screw x 8(M3x8mm)

    SKU: HN7031QF
    €24.90
    inc. VAT

     72HR STOCK

Manufacturers

Back