T-rex Electric

Brand new Align T-REX 150X DFC Super Combo - BTF 150  WITH  GRS Flight Controller Unit. Set up and update the flight parameter settings via APP Interface.
6-axis Gyro - 3-axis gyroscope + 3-axis accelerometer using a superior ARM Cortex-M4 32-bits processor.

• Attitude Auto-level Mode & Rescue Mode.
• Brand new DFCS (Direct Flight Control System) Controller allows to control real time flight.
• BL Heli ESC allows faster motor feedback and precise flying performance.
• Integrates main motor & tail motor in a dual system output. Also it adopts a high-speed and powerful micro MCU processor, which features low-voltage, low-temperature, and lost and found protection.
• Built-in Receiver: Futaba S-FHSS 2.4GHz System.
• Compatible with Spektrum DSM2/DSMX, JR DSM2/DMSS satellite.
• Rigidity Main Frame.
• Fully metal CNC CCPM Swashplate.
• New tail motor plug mount makes maintenance easy.

Specifications

• Length: 255mm
• Height: 80mm
• Main Blade Length: 120mm
• Main Rotor Diameter: 271mm
• Tail Rotor Diameter: 45mm
• Motor Pinion Gear: 10T
• Main Drive Gear: 78T
• Weight (w/o Battery): 53g

Content

• 1x T-REX 150X DFC
• 4x Main Blade
• 2x Tail Blade
• 1x 150M Main Motor
• 1x 150M Tail Motor
• 1x DS155 Digital Servo
• 2x DS150 Digital Servo
• 1x Bind Plug
• 1x Remote Extension
• 2x 7.4V Li-Po 250mAh Li-Polymer Battery
• 1x 150 Carry Box-Black (292x160x69mm)
• 2x 1.3mm Hexagon screw driver (Blue/8.2g)
• 1x 0.9mm Hexagon screw driver (Red/8g)
• 1x Parts box E (78.5x60.9x21mm)
• 1x Parts box A (52x40x12mm)
• 1x CH150 Li-Po Charger

Required for assembly
1x ALIGN T6 or Futaba S-FHSS 2.4G Transmitter or 1x JR DSM2/DSMJ/DMSS / Spektrum DSM2 2.4GHz Transmitter

T-REX 450 has been the ideal choice for entry level R/C helicopters. To cater to the beginner enthusiasts and solve the problem of assembly and adjustment, Align introduced T-REX 450LP ARTF (Almost Ready to Fly). Completed with Align A10 transmitter and newly released Mini GRS flybarless system, just easy to experience the fun fly enjoyment.

The helicopter utilizes DFC rotor, paired with Mini GRS flybarless system optimized for T-REX 450LP flight characteristics. Without any adjustment or tuning, this combo will be provided optimal stability suitable for pilot of all levels.

Equipped with newly digital high voltage servo DS450 and DS455, supports 8.4 high voltage to provide optimal speed and torque performance. Paired with newly RCE-BL45P ESC, supports adjustable 5~8.4V BEC function to highly improve flight performance.

ALIGN A10 is AFHDS (Automatic Frequency Hopping Digital System) 2.4GHz transmitter provided with 10 channels. The stick and holder are designed based on ergonomic bringing much smoother control. Completed function with the mode of helicopter / aircraft / multicopter. Logical and simple control interface, and easy to set up.

With the addition of the brand new A10 transmitter and Mini GRS, the T-REX 450LP ARTF pushes past the performance limitation of flybar helicopter, improving both stability and 3D performance, while maintaining a down to earth price level.

FEATURES:

AFHDS:
1. Automatic Frequency Hopping Digital System, AFHDS is a highly developed remote signal transmission system, providing long range, minimizing interference, with lower power consumption.
2. The frequency range of the system is 2.4055 ~ 2.475 GHz. The wave band is separated from 160 independent frequencies. The transmitter uses 16 different frequency and 160 different frequency hopping algorithms. Each time the transmitter is powered on a different frequency hopping scheme is used allowing the transmitter to avoid interference of the transmission signal.
3. Each transmitter has unique ID code when binding to the receiver, the receiver saves this unique ID code and only accepts a signal transmitted by the saved ID code transmitter. This process avoids receiving another transmitter signals and significantly enhance the anti-interference ability and security.

A roll style slider is used to scroll through menu options providing a quick setup.
20 models memory with either Chinese or English interface, three aircraft options (helicopter/airplane/multicopter), Modes 1-4 available with optional direction output, set buzzer warnings, and supported firmware upgrade.

Up to four electronic timmers. Ergonomic design for comfortable feel and smoother control. The transmitter case is matte black with spined red control sticks to give a unique, and stunning look.

Heli:

Equipped with the DFC flybarless head designed for extremely low CG to minimize wind resistance while providing an enhanced direct control feel. As a standard feature, the new main rotor head block and spindle design is included. New designed 325 3D main rotor blades are stable and agile resulting in improved flight performance for the beginner or 3D pilot.

Align has over 25 years of experience with motor core technical knowledge. Based on 3s 11.1V the 460MX (3200KV) motor is specifically designed for the T-REX 450L Dominator, featuring superior efficiency, high power output, extreme torque, low current, and low operating temperature. The 460MX motor shares the same extraordinary engineering design features as the 850MX Dominator motor.

Three programmable throttle speed settings for quick throttle response control. Adjustable BEC output voltage (5~8.5V), auto power detection system suitable for 2S~6S Li battery, a continues 3A current rating, a burst rating of 6A, continuous current 45A and a surge current 60A for 15 seconds.

New CNC metal reinforcement main frame brace is installed with the frame mounting bolts increasing the main frame strength to improve flight stability for the beginner or the 3D pilot. The solid reinforcement of the frame is easily felt during extreme 3D maneuvers. Also, the stylish appearance of red anodized and silver color frame brace enhances the high-end appearance of the T-REX 450L.

Carbon main frames utilizes composite integration technology to embed the battery mounting rails directly into the frames. This high-end manufacturing process allows for the clever use of open space in the frame body for a more rigid frame structure to improve flight performance. The T-REX 450L cleverly expands on the core concepts of the T-REX 450Pro design to continue our design excellence.

Designed with direct to swash control, and a one-piece main bearing block with integrated servo mounts for simplified servo installation is aesthetically pleasing. New dual bearing design DS450 servos minimize deadband and increase longevity feature improved torque and speed.

New sliding battery tray with locking system and frame integrated mounting rail provides easy battery access. The design also provides extra battery protection.

New anti-rotation guide with embedded anti-wear material to minimize the wear between the swashplate long ball and the guide.

Horizontal rudder servo mount designed for improved center of gravity (CG) to enhance Beginner or 3D flying.

Included tail boom support bridge to increase the rigidity of the overall tail boom to improve control.

Brand new tail blade grips which utilize thrust bearings to improve rudder precision control while increasing the life of the bearings. New 65 mm tail rotor blades combined with the 360mm main rotor blades contribute to improved tail authority.

New dual tail sider support assembly for a slop free tail to improve rudder resolution and control.

Mini GRS:

1. Special design for ALIGN small helicopters. It's light and simple.
2. Support the latest new ALIGN A10 Radio (10-channel/A.BUS system) for the best working operation.
3. Support T-REX 250/450/470/500 models, no need to setup, outstanding flight performance for the beginner or 3D pilot.
4. Support JR DSM2 and Spektrum DSM2/DSMX satellite. Built-in Futaba S-FHSS 2.4GHz support for Futaba S-FHSS transmitter.

Balance Charger RCC-3SX:

1. Suitable for international AC 100V~240V.
2. Voltage balancing charging is suitable for 2S 7.4V and 3S 11.1V lipo batteries.
3. Automatically correct out of balanced cells, and automatically charge cells with low voltage.
4. Auto-detected charge status display. (Red light: while charging Green light: end of charging)
5. Reverse polarity (warning beep) and built-in short protection.
6. Aluminum alloy shell with an internal cooling fan for effective heat dissipation.

3S1P 11.1V 2200mAh/30C Battery:

1. Cells are inspected to ensure matching cells are used during manufacturing to ensure high-performance battery production. The best choice for the T-REX 450 helicopter series or other models such as airplanes and cars.
2. Max Continuous Discharge: 30C(66A), Burst Discharge: 40C(88A). Normal operating temperature is approx. 40-65°C (within 80% of rated discharge). Max. Temperature: 80°C.

Content:

• A10 Transmitter x 1
• A6B Receiver x 1
• RCE-BL45P ESC x 1
• 460MX Brushless motor(3200KV/2222) x 1
• DS450 Digital servo x 3
• DS455 Digital servo x 1
• MINIGRS Flybarless System x 1
• Balance Charger RCC-3SX x 1
• 3S1P 11.1V 2200mAh/30C Battery x 1
• T-REX 450L Kit x 1

A10 Specifications:

• Channel: 10-Channel
• Available Models: helicopter/airplane/multicopter
• Frequency range: 2.4055 ~ 2.475 GHz
• Power: no higher than 20dBm
• System Mode: 2.4G system AFHDS 2A
• Suitable Voltage Range: 4.0 ~ 6.0V DC
• Receiving Distance: the open ground no interference < 1000M
• Low Voltate Warning: Lower than 4.2V
• Weight: 487g (excluded battery)
• Size: 187x89.6x215mm

MINI GRS Specifications:

• Operating voltage range: DC 3.5~8.4V
• Operating current consumption: <100mA @ 4.8V
• Rotational detection rate: ±300°/sec
• Rudder yaw detection rate: ±600°/sec
• Sensor resolution: 12 BIT
• Swashplate Support: 120° CCPM Swashplate
• Mode Support: T-REX250, T-REX450, T-REX470, T-REX500
• Receiver Support: ALIGN A10(A.BUS), Futaba S-FHSS, DSM2/DSMX
• Operating temperature: -20℃ ~ 65℃
• Operating humidity: 0% ~ 95%
• Comply with RoHS
• Size: 37.6x22.4x13mm

Balance Charger RCC-3SX Specifications:

• Input Voltage: AC 100V~240V(50/60Hz)
• Output Voltage: 2cell DC 7.4V / 3cell DC 11.1V
• Supported Battery Type: Li-polymer / Li-ion
• Charging Method: CC/CV
• Charging Current: 2A
• Size: 123x74.3x32mm
• Weight: 260g

Battery Specifications:

• Output: 11.1V 2200mAh 24.4Wh(3S1P)
• Supports 5C charging
• Dimension: 104x36x22mm
• Weight: 165g
• 14AWG heat-resistant silicone rubber wire. Heat resistance: 200 ° C / Current withstand: 50A

T-REX 450L Specifications:

• Length: 705mm
• Height: 205mm
• Width: 110mm
• Main Blade Lenght: 325mm
• Main Rotor Diameter: 734mm
• Tail Rotor Diameter: 171mm
• Motor Drive Gear: 11T
• Main Drive Gear: 121T
• Autorotation Tail Drive Gear: 106T
• Tail Drive Gear: 26T
• Drive Gear Ratio: 11:1:4.07
• Weight(w/o battery): 730g

Included:

• T-REX 450L Kit Set x 1 set
• MINIGRS Flybarless System x 1 set
• A10 Transmitter x 1
• 325 Carbon Fiber Blades x 1 set
• RCE-BL45P ESC x 1
• 460MX Brushless motor(3200KV/2222) x 1
• DS450 Digital servo x 3
• DS455 Digital servo x 1
• 3S1P 11.1V 2200 mAh/30C Li-polymer Battery x 1
• Balance Charger RCC-3SX x 1 set
• 1.5V AA Zinc-Carbon Battery x 4

Radio transmitter and electronic equipment required for assembly:

• 1.Dial Pitch Gauge or Digital Pitch Gauge
• 2.Swashplate Leveler

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530/DS535 digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Specification :

• Length: 935mm
• Height: 259mm
• Width: 151mm
• Main Blade Length: 470mm
• Main Rotor Diameter: 1054mm
• Tail Rotor Diameter: 219mm
• Motor Pinion Gear: 12T
• Main Drive Gear: 134T
• Main Drive Pulley: 80T
• Tail Drive Gear: 21T
• Drive Gear Ratio: 11.17:1:3.81
• Weight(w/o battery): approx. 1400g

Content :

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530 HV Digital Servo
• 1x DS535 HV Digital Servo

Required for assembly :

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Flybarless System
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

The NEW T-REX 550X is definitely a significant leap forward in performance, enhanced by increased power, the integration of numerous innovative design changes, and lightweight improvements. The T-REX 550X performance is outstanding!

The brand new FL Flybarless Rotor Head System utilizes an extremely low CG design, reducing resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 550X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. In addition, the T-REX 550X's lightweight design is 200~250g (Combo250g/Super Combo 200g) lighter than our pervious model, this effectively increase the power and improves flight time.

The T-REX 550X utilizes the powerful 730MX (960KV) motor and our RCE-BL100A Brushless ESC which both are highly efficient providing superior power, improving the performance of the 6S power system. The NEW DS820M/DS825M high voltage brushless servos are extremely efficient and out perform other servos in this class. To protect these servos the new high-end CNC aluminum case function as a heat sink allowing the servos to operate at a lower temperature.

With improved performance and increased power, as well as included top of the line electronic equipment. The new T-REX 550 X will arouse your enthusiasm and devotion to the T-REX Family.

Specifications :

• Length: 1163mm
• Height: 344mm
• Width: 196mm
• Main Rotor Diameter: 1248mm
• Main Blade Lenght: 550mm
• Tail Rotor Diameter: 254mm
• Motor Drive Gear: 16T
• Main Drive Gear: 112T
• Autorotation Tail Drive Gear: 131T
• Tail Drive Gear: 34T
• Drive Gear Ratio: 7:1:3.85
• Weight(w/o power system): 2590g

Content :

• 1x T-REX 550X DOMINATOR
• 2x 550 Carbon Fiber Blade
• 2x 90mm 3K Carbon Fiber Tail Blade
• 1x 730MX Brushless Motor (960KV)
• 3x DS820M High Voltage Brushless Servo
• 1x DS825M High Voltage Brushless Servo
• 1x RCE-BL100A Brushless ESC
• 1x Microbeast PLUS Flybarless System

Required for assembly :

• 1x Transmitter (7-channel or more,helicopter system)
• 1x Receiver (7-channel or more)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x 6S Li-Po 2600~5200mAh battery

The T-REX 800E PRO DFC is an 800 class flagship designed specifically for 3D flights. The CCPM direct connect servo design, coupled with DFC rotor head assembly, results in fast, precise, and more direct control reaction. The frame material integration technology is utilized on the landing gears and vertical tail fin, creating a unique look not only making the T-REX 800E PRO DFC stand out, but also resulting in an innovative design that encompasses structure rigidity along with beautiful aesthetics.

Nothing was spared in the electronics components of the kit: The mighty power of the 850MX(490KV) motor paired with Castle Edge HV 160 speed controller for unparalleled power output; The new CNC machined aluminum cased BL815H brushless high voltage cyclic servos paired with BL855H rudder servo not only exhibited top of the line servo aesthetics, but also combine heat sink function and best performance in the market segment.

The T-REX 800E PRO DFC can be described as the current top of the line flagship representing Align’s superior product line. Based on the pedigree of pure 3D flight, the newest design concept with absolute top of the line equipment, along with superior aesthetics and attractive lines, the T-REX 800E PRO DFC will definitely elevate the adrenaline in your blood!

Content

• 1x T-REX 800E PRO DFC Kit
• 2x 780mm Carbon Fiber Main Blade
• 2x 115mm 3K Carbon Fiber Tail Blade
• 3x BL815H High Voltage Brushless Servo
• 1x BL855H High Voltage Brushless Servo
• 1x 3K Carbon Fiber Tail Boom
• 1x 850MX Brushless Motor (490KV)

Experienced in numerous of innovations, the brand new T-REX 500X is now ready to go. More attractive and creative design ideas are all in here, it absolutely would be your favorite T-REX 500X model ever.

Refresh and refine, T-REX 500X adapt with brand new FL rotor head system, utilizes an extremely low CG design which reduces resistance during 3D maneuvers while increasing flight responsiveness and precision. A progressive design adds a gloss silver and red anodizing appearance which continue our quality development based on our 700 class helicopter. The T-REX 500X main frame utilizes composite material integration technology on carbon side frame plates, including the addition of battery mounting side rails, and a top motor mount design. Innovative adjustable belt guide pulley, allows a convenient way to adjust the belt tension by releasing or tightening the screw. The screw is used to maintain optimal belt tension over time to keep the best. Also T-REX 500X landing skid is tilted 5 degrees forward to improve crashworthiness.

T-REX 500X utilizes 470mm main blades and 520MX(1600KV/3527) motor with 20% power upgrades than the original 1600KV/3225 motor. The latest new RCE-BL80X Brushless ESC support dual BEC output from 6 ~ 8.4V providing efficient and superior power. The NEW DS530M/DS535M digital servos are with extreme torque and speed response allow to support faster, more precise and accurate flight performance.

Equipped with all the top end electronic devices, T-REX 500X is as stable and powerful like the large scale helicopters. It is about to re-define the 500-class helicopters in your mind.

Specification :
Length: 935mm
Height: 259mm
Width: 151mm
Main Blade Length: 470mm
Main Rotor Diameter: 1054mm
Tail Rotor Diameter: 219mm
Motor Pinion Gear: 12T
Main Drive Gear: 134T
Main Drive Pulley: 80T
Tail Drive Gear: 21T
Drive Gear Ratio: 11.17:1:3.81
Weight(w/o battery): approx. 1450g

Content :

• 1x T-REX 500X Dominator Kit
• 1x 520MX Brushless Motor
• 1x BL80X Brushless ESC
• 2x 470mm Carbon Main Rotor Blade
• 2x 78mm Tail Rotor Blade
• 3x DS530M HV Digital Servo
• 1x DS535M HV Digital Servo
• 1x MICROBEAST Plus Flybarless System

Required for assembly :

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more, suitable to Transmitter)
• 1x Pitch gauge or Digital Pitch Gauge
• 1x Flight battery 6S Li-Po 2600 ~ 4600mAh (3300mAh suggestion)
• 1x LiPo Battery Charger

Fun and easy flying characteristic has been the reason for T-Rex 100S’s unparallel popularity. To increase its performance even further, Aligh has improved upon the T-Rex 100S and introduces the brand new T-Rex 100X.

The innovators at Align developed an awesome control method for the T-Rex 100. By connecting the 2.4G transmitter attachment to your trendy iPhone, your phone is instantaneously transformed into a T-Rex 100 controller.

But the most unique feature is that T-Rex 100X can also be controlled through an iPhone, allowing pilot to experience a completely different flying method.

To use the 2.4G transmitter attachment, Align’s Flight app need to be installed on your iPhone. This app is the control interface for your T-Rex 100 helicopter, which can be downloaded and installed to your iPhone (and iPod Touch, iPad) through iTunes by searching for ALIGN Flight. The control interface mimics the rc controllers with two sticks that controls the helicopter’ s movements. The stick modes can also be changed to one of the 3 settings. In addition, helicopter control can be done through iPhone’s motion sensors.

Superior flight stability and quality assurance, for immediate indoor flying gratification, T-Rex 100X is the prime choice for any pilot!

Features:

• Dedicated 2.4GHz wireless transmitter, which attaches to iPhone to transform it into a T-Rex 100X controller.
• Special iPhone app incorporating fully functional remote control capability for controlling T-Rex 100X.
• Gyro gain adjustment function.
• Brand new rotor head to main shaft attachment design, improving flight stability and minimize vibration.
• Extended tailboom to improve gyro tail locking ability and overall controllability.
• Brand new canopy design.
• Increased flybar paddle to effectively increase flight stability.
• Utilizes hobby grade micro servos and increased frame rigidity, for flight stability, crash survivability, and longevity.
• Specifically lipo battery charger, capable of charging two battery packs concurrently.
• 5-in-1 circuitry includes receiver, ESC, heading lock gyro, servos, and mixing function.

Specifications:

• Length:209mm
• Height:82mm
• Main Rotor Diameter:192mm
• Tail Rotor Diameter:36mm
• Weight(w/o power system):28.8g
• Flying Weight:Approx 33g
• A5 2.4G Wireless transmitter attachment:
• Battery Specifications : 3.7V 60mAh Li-Po
• USB Charging port input : DC 5V
• Size : 86.7 x 19.8 x12.8 mm
• Weight : 15 g

Included:

• T-REX 100X Kits set x 1
• A5 Transmitter x 1
• 3.7V / 150mAh Li-Polymer Battery x 2
• CH100 Lipo Charger x 1
• USB Cable x 1
• Philips Screwdriver x 1

Aligns smallest and most petite 3D helicopter T-Rex 150 DFC, carries the same superior pedigree and design concept that originated from successful T-Rex line of helicopters.
Featuring strong power, superior flight control stability, and equipped with high end components, far exceeding any other helicopters currently on the market.
Miniature size, control precision that resembles the larger helicopters, enables you to enjoy this with ease by just turning down the speed dial.
The innovative breakthrough T-Rex 150 DFC will bring you a new dimension of flying enjoyment.

Features
Multiple receiver system
Compatible to Futaba S-FHSS, Spektrum DSM2/DSMX and JR DSM2/DSMJ/DMSS System.

Specifications

• Length: 255mm
• Height: 80mm
• Main Blade Length: 120mm
• Main Rotor Diameter: 271mm
• Tail Rotor Diameter: 41mm
• Motor Pinion Gear: 10T
• Main Drive Gear: 78T
• Drive Gear Ratio: 1:7.8
• DS150 Digital Servo: Stall torque: 0.6kg/cm / Motion speed: 0.06sec/60° (5V)
• DS155 Digital Servo: Stall torque: 0.8kg/cm / Motion speed: 0.05sec/60° (5V)
• Weight: (w/o battery): 53g

Accessories

• T-REX 150 DFC Kit x 1
• 120mm 3D Main Rotor Blade (2.9g/each) x 2
• 120mm stable Main Rotor Blade (3.6g/each) x 2
• 150M Brushless Main Motor x 1
• 150M Brushless Tail Motor x 1
• DS155 Digital Servo x 1
• DS150 Digital Servo x 2
• integrated Flybarless System x 1
• Tail Rotor Blade x 1
• Remote Extension 47mm x 1
• Bind plug x 1
• Li-Po 2S1P 7.4V 250mAh 30C x 1

Radio transmitter and electronic equipment required for assembly
Transmitter (min. 6-channels Futaba S-FHSS, Spektrum DSM2/DSMX and JR DSM2/DSMJ/DMSS System) x 1
Remote receiver (only if using Spektrum DSM2/DSMX and JR DSM2/DSMJ/DMSS System) x 1
Pitch gauge x 1

T-REX 450L Dominator Super Combo (6S) with MICROBEAST Plus

The internationally popular T-Rex 450 has long been a trend setting helicopter, every enthusiasts probably has owned at least one.
It is the ideal model for beginners as well as experts practicing advanced maneuvers.
Now the T-Rex 450 evolution continues, as Align drops another shocker into the market; with even more innovative designed incorporated, the brand new T-Rex 450L Dominator.

T-Rex 450L reverses the common impression people have on T-Rex 450, with material integration technology utilized on side frame design, and has features previously found only on larger models, such as battery mounting rails, top mounted motor, 700E DFC type main bearing block with integrated servo mounts, forming striking resemblances to larger contest grade models.
The newly added frame reinforcement plates not only improves helicopter′s overall rigidity and anti-torsion characteristics, the beautiful red anodizing also creates highly pleasing aesthetics, further exhibits the T-Rex 450L′s attractiveness and exclusiveness.
In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450 Pro designs, to carry on the heritage of its mature design of excellence.

Equipped with the DFC flybarless head assembly, paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, improving anti-torsion characteristics and power output during flight, resulting in even better flight stability.
Based on 6S 22,2V the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR.
When paired with RCE-BL45X brushless speed controller, the motor has superior efficiency, high power output, extreme torque, and low current, low temperature
As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.

With cutting edge design concepts and top grade electronics, T-Rex 450L Dominator surpasses traditional flight performances with higher stability, extreme power, superior control feel, yet maintains the convenience of smaller size.
The T-Rex 450L Dominator is a model not to be missed!
Features:

    Equipped with the DFC flybarless head assembly, with extremely low CG design to minimize wind resistance while providing more direct control feel. In addition, the brand new main rotor head block and new spindle design has been incorporated as standard feature. Paired with newly designed 3D specific 360 3G main rotor blades that are both stable and agile, resulting in improved flight performance.
    Carbon side frame plates utilized composite material integration technology, featuring integrated battery mounting rails. The clever use of open spaces within the frame resulting in a structure that is both rigid and aesthetically pleasing. In addition, the T-Rex 450L cleverly expands on the core concepts of T-Rex 450Pro designs, to carry on the heritage of its mature design of excellence.
    Designed with direct servo CCPM control, and a single piece main bearing block with integrated servo mounts similar to that of T-Rex 700E DFC, for simplified servo installation and clean aesthetic. Brand new DS416M servos feature improved torque and speed, with dual bearings design to minimize deadband and provide better longevity.
    Based on 6s voltage, the 460MX (1800KV) motor is tailor made for the T-Rex 450L DOMINATOR, featuring superior efficiency, high power output, extreme torque, and low current, low temperature. As a totem to the 850MX Dominator motor, The 460MX shares the same extraordinary pedigree.
    Brand new RCE-BL45X electronic speed controller, capable of 2S-6S lipos, with switching BEC featuring variable voltage adjustment between 5V-6V.
    Frame reinforcement plates were added to effectively increase frame rigidity and increase anti-torsion ability. Classic red anodizing increases overall aesthetics of the helicopter.
    Brand new battery mounting plate with battery latching design, along with integrated mounting rails in side frames to simplify battery installs while protecting them.
    New style swash anti-rotation guide with embedded anti-wear material, effectively minimize the wear between swashplate long ball and guide.
    Vertical rudder servo mount design for closer CG, increasing the sportiness of 3D flights.
    Added tailboom support bridge design to increase the rigidity of the overall tailboom/support assembly.
    Using competitive material and special imbedded technology for vertical tail, enhanced its structural strength and boutique texture efficiently, vivacious color providing excellent visibility.
    Brand new tail blade grips with thrust bearing design, dramatically increase rudder precision and tail locking effectiveness, while increasing the longevity of bearings. The brand new extended tail rotor blades to match the 360mm main rotor blades also contributes to the tail locking performance. The new style paint scheme provides better visibility in midair.
    New style dual point supported tail control assembly for slop free tail, improving on rudder resolution and control precision.

Specifications:

•     Length: 705mm
•     Height: 205mm
•     Width: 110mm
•     Main Blade Lenght: 360mm
•     Main Rotor Diameter: 804mm
•     Tail Rotor Diameter: 171mm
•     Tail Rotor Lenght: 68mm
•     Motor Drive Gear: 11T
•     Main Drive Gear: 121T
•     Autorotation Tail Drive Gear: 106T
•     Tail Drive Gear: 25T
•     Drive Gear Ratio: 1:11:4.24
•     Weight (w/o power system): 730g

Includes:

•     1x T-REX 450L DOMINATOR Kit
•     1x MICROBEAST Plus Flybarless System
•     2x 360 3G Carbon Fiber Blade
•     2x 68 Carbon Fiber Tail Blade
•     1x RCE-BL45X 45A Brushless ESC
•     1x 460MX Brushless Motor (1800KV)
•     3x DS450 Digital Servo
•     1x DS455 Digital Servo

Equipment required for assembly:

•     1x Transmitter (6-channel or more, helicopter system)
•     1x Receiver (6-channel or more, compatible with Transmitter)
•     1x Pitch gauge or Digital Pitch Gauge
•     1x 6S1P 22,2V Li-Po 1100~1400mAh battery-Po 1100~1400mAh battery

Successor of the T-REX 450L, equipped with high-end electronic equipment. Align's most anticipated helicopter release in 2016 the T-REX 470L is born. No matter whether you are a newcomer or a professional, the brand new T-REX 470L will give you the new flying feel again.

470EFL Main Rotor Head provides superior flight stability and offers a lower CG design to reduce flying resistance while providing a more rigid and fast rotor head response. To improve the strength and durability of the main and feathering shaft the 470 main shaft outer dimension was increased from 5mm to 6mm, while the feathering shaft outer dimension was increased from 4mm to 5mm. The 470L has adopt a high standard 1.2mm 3K carbon fiber main frame and a wider body design which increases the size of the battery compartment allowing the use of larger capacity battery. The 470L utilizes a high efficient belt drive assembly design with an innovative adjustable belt guide pulley, providing a convenient way to adjust the belt tension by releasing or tightening the screw. This screw is used to maintain optimal belt tension improving the life of the belt and lowering maintains costs. The landing skid is tilted 5 degrees forward to improve crashworthiness and makes T-REX470L more avant-garde and dynamic.

The T-REX 470L is equipped with the large outer diameter 470MX motor (1800KV) which is highly efficient providing superior power, excellent torque, improved current draw, and a lower operating temperature which are excellent improvements as compared to the 460MX motor

Specification:

•  Length: 755mm
•  Height: 210mm
•  Width: 108mm
•  Main Blade Length: 380mm
•  Main Rotor Diameter: 850mm
•  Tail Rotor Diameter: 181mm
•  Motor Pinion Gear: 11T
•  Main Drive Gear: 121T
•  Main Drive Pulley: 56T
•  Tail Drive Gear: 15T
•  Drive Gear Ratio: 11:1:3.73
•  Weight(w/o battery): 860g

Included in the kit:

•  T-REX 470L DOMINATOR Set x 1
•  380 Carbon Fiber Blades x 1set
•  69 Tail Blade x1set
•  470MX Brushless Motor(1800KV) x 1
•  RCE-BL50X 50A Brushless ESC x 1

Radio transmitter and electronic equipment required for assembly:

1.Transmitter(6-channel or more,helicopter system)
2.Receiver(6-channel or more)
3.Pitch gauge or Digital Pitch Gauge
4.6S Li-Po 1400~1900mAh battery x 1
5.CCPM Servo X 3
6.Tail Servo X 1
7.Flybarless System x 1

Powered by 750MX (530KV) motor engraved with DOMINATOR insignia, providing extraordinary power output.
The latest BL815H and BL855H metallic brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision.
These servos are highly appraised by team pilots for their low operation heat, contributing to dramatically increased longevity.

Alignquote s T-Rex 600L Dominator, incorporates all the top grade upgrades, and the Microbeast PLUS flybarless system, with stability and power exceeding all past expectations.
The superior control feel, and attractive look, the T-Rex 600L Dominator is the top choice for any enthusiasts!

Features:

• The high-end Microbeast PLUS 6-axis gyro with 32-bit high-speed processor is much precise and superior in programming and computing allow for significant handling performance and delicate response. In addition, the Microbeast PLUS gyro is vibration-reducing improvement and strongly reduce the effects of the vibration to flying performance.
• Equipped with the low CG DFC rotor head, effectively reduce wind resistance during flight, providing the most direct and precise control feel back to the pilot, and exhibits exhilarating 3D performance and unimaginable flight speed. The brand new spindle shaft design features with oversized M5x10mm spindle screws to increase the rigidity of the overall rotor head.
• Brand new 600E PRO Performance Booster designed specifically to bump up the power output of T-Rex 600E PRO by 30% by upgrading the motor from 600MX motor (3300w/5500w) to 750MX/530KV motor (4400w/7260w). The feel as if a turbo charger was added to the helicopter, with dramatic increase of motor torque output, and near bulletproof governing speed of the rotor, while maintaining power consistency throughout the entire flight duration.
• Top mounted motor base and imbedded servo mounts. The latest BL815H and BL855H metallic brushless servos are standard equipment, featuring superior torque, speed with unparalleled efficiency and precision. These servos are highly appraised by team pilots for their low operation heat, contributing to dramatically increased longevity.
• New lightweight H-cross section for electronic equipments.
• Sliding battery tray rails imbedded into 3K Side frame.
• Equipped with new high strength CNC M1/118T helical main gear and tail drive bevel gear assembly, featuring reinforced overall gear structure and increased gear thickness, effectively improves gear′s anti torsion ability to prevent gear from deforming under extreme power, reducing gear wear and power loss.
• CNC machined aluminum pieces including servo mount.
• New tail control assembly with dual mounting points, effectively eliminate slop and improve control precision and feel.
• Utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability for torque tube drive gear. Effectively minimize gear striping and crash damage.

Specifications:

• Length: 1160mm
• Height: 319mm
• Width: 210mm
• Main Blade Length: 600mm
• Main Rotor Diameter: 1347mm
• Tail Blade Length: 95mm
• Tail Rotor Diameter: 260mm
• Motor Drive Gear: 14T
• Main Drive Gear: 118T
• Autorotation Tail Drive Gear: 131T
• Tail Drive Gear: 34T
• Drive Gear Ratio: 1:8.42:3.85
• Weight (with Motor): 2900g

Includes:

• 1x T-REX 600L DOMINATOR Kit
• 2x 600mm Carbon Fiber Main Blade
• 2x 95mm Carbon Fiber Tail Blade
• 1x 750MX Brushless Motor (530KV)
• 3x BL815H High Voltage Brushless Servo
• 1x BL855H High Voltage Brushless Servo
• 1x Align RCE-BL130A Brushless ESC
• 1x Microbeast PLUS Flybarless System

Required for assembly:

• 1x Transmitter (7-channel or more, helicopter system)
• 1x Receiver (7-channel or more)
• 2x 6S 22,2V Li-Po 2600~4600mAh or 1x 12S 44,4V Li-Po 2600~4600mAh (3300mAh suggestion)
• 1x Li-Po Charger
• 1x Digital Pitch Gauge or Dial Pitch Gauge