710mm and Up

• Length: 710mm (bolt hole to tip)
• Width: 64mm
• Root: 12mm
• Bolt Hole: 4-5mm

 15 Years of Flight research are packed in the box.

MAH 4G high performance premium Carbon blades, Especially tuned and balanced for today's flight performance 3D and Precision.
You will feel an immediate effect when flying with MAH 4G , excellent control in the air , and if needed, aggressive response performance,.
MAH 4G are a perfect fit for Flybarless helicopters, combining long and precise R&D, Inserting the best features of Flybarless performance in one Blade.

Materials: MAH 4G are constructed in Europe, from high quality German carbon fiber and have a symmetrical airfoil to give superb flight performance in all situations.
An efficient and special airfoil with a top quality finish leads to greater efficiency and improved flight times.

Whether you are a beginner or advanced 3D pilot you will appreciate the flight performance these blades have to offer. Great hovering stability combined with response when you need it. Nothing comes close to MAH 4G

You wish you could get your flying a little extra out of? Bolt on a pair of the MAH 4G blades and take your machine flying to the next level!!

All blades are pre-balanced and ready to fly.
Designed and Manufactured in the Europe, using all EU made materials.
Blade sets are pre-balanced and ready to fly.

Blade Specs:

• Length: 710mm (bolt hole to tip)
• Width: 64mm
• Root: 12mm
• Bolt Hole: 4-5mm

EDGE 713mm Premium F3C Blades B-surface,These are slight seconds, only small cosmetic flaws, the odd lump, bump or run in the paint fantastic value for money

EDGE high performance CF rotor blades are new premium blades that have been specifically designed for today's model helicopters. EDGE rotor blades have been optimized for use with today's light weight, high powered models with increased cyclic pitch. While these blades are ideal for aggressive Flybarless 3D performance, they can also be used for more precision FAI & FC3 flying on traditional flybar machines.

Flybarless Edge blades may be flown on flybarred helicopters for a smoother and less aggressive FAI style cyclic response.

Features:
Airfoil designed specifically for flybarless helicopters.
Integrated lead weight safety harness.

Specs:
Length: 713mm
Width: 60mm
Root: 12mm
Bolt Hole: 5mm
Weight: ~ 235-237 grams per blade

Includes:
One pair of EDGE blades.
4 x 1mm shims.
A good time.

EDGE rotor blades are proudly designed in the USA and Manufactured by one of the best known blade manufacturers in the world funkey.

Get an EDGE on your competition with these rotor blades. 

EDGE 713mm Premium Flybarless Blades Version B-surface
These are slight seconds, only small cosmetic flaws, the odd lump, bump or run in the paint fantastic value for money

EDGE high performance CF rotor blades are new premium blades that have been specifically designed for today's model helicopters. EDGE rotor blades have been optimized for use with today's light weight, high powered models with increased cyclic pitch. While these blades are ideal for aggressive Flybarless 3D performance, they can also be used for more precision FAI & FC3 flying on traditional flybar machines.

Flybarless Edge blades may be flown on a traditional flybar helicopters for a smoother and less aggressive FAI/FC3 style cyclic response.

Features:
Airfoil designed specifically for flybarless helicopters.
Integrated lead weight safety harness.

Specs:

• Length: 713mm
• Width: 60mm
• Root: 12mm
• Bolt Hole: 5mm
• Weight:~ 200-204 grams per blade

Includes:

• One pair of EDGE blades.
• 4 x 1mm shims.
• A good time.

EDGE rotor blades are proudly designed in the USA and Manufactured by one of the best known blade manufacturers in the world funkey.

Get an EDGE on your competition with these rotor blades. 

Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

1- Great look, they fit all color schemes.
2- They Fly great, Sharp response,Efficient- give your maximum flight time per Lipo
3- Price is very decent for EU made product.
4- Perfect balance, Static and Dynamic.

Specification of blades:

• Length:700mm
• Root: 12mm
• Bolt Hole: 5mm
• Weight: 178g
• Width: 60-63mm
• Profile:Symmetrical, optimized for Flybarless helicopters

New Profile, New color scheme, especially for HARD 3D!!

MAH blades incorporate a revolutionary steel safety wire retention system. This assures a high level of safety in the event of a “structurally compromising impact,” better know as a crash.
Those blades are combination of design taken from many blades, and combined all in one..

Specifications:

• Length: 710 mm
• Chord: 63 mm
• Root: 12 mm

Blades are matched by weight and center of gravity. Dynamically and static balanced

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

• Length: 810mm
• Chord: 81mm tapering to 68mm at blade tip.
• Weight: 225-245 grams
• Bolt: 4/5mm
• Root: 14mm
• Weight : +-270grm

Based on stock, we can offer 2 color schemes: Black/White or Color scheme(see images)

These are the original MAH dual taper series main rotor blade. Not only That the blade's chord gradually tapered, but the airfoil is also tapered thinner towards the blade tip. This yields a high performance blade suitable for 3D flying.

Those blades were designed for Military use, especially made to carry a heavy lift without flex.
Main fit is for 1.8+ helicopters, Jet Turbines Helicopters, and UAV applications The main blades are made from the highest quality CF and are used by pro flyers around the world.
MAH blades are balanced & shipped with proper CG for the absolute best performance.  And chosen by leading pilots worldwide, and many reputable UAV producers.

Full symmetrical Carbon main blade for helis.

• Length 950mm
• Root :14mm
• Width: 90(root)-75(tip)
• Weight : +-360grm

Main Blades 750 TB

We made the "SAB Thunderbolt Blades" to grow the performance of your helicopter. The amazing design was developed not only for an esthetic purpose, but it also improved the visibility of the tip of rotor, higher visibility is necessary in very low maneuvers. The variable profile along the radius of the rotor makes the "SAB Thunderbolt Blades" 20% more efficient in comparison to the "SAB black line blades" and gives great stability to the whole helicopter without compromising the agility of the rotor. The chord varies along the radius of rotor (Shorter at the root, larger at tip); thanks to the aerodynamic of the rotor, gives more thrust exactly where the rotor generates it, that allows harder and more precise maneuvers in flight. To improve the stiffness the "Thunderbolt Blades" includes double layer of unidirectional carbon fiber.
In order to guaranty safety in the event of a crash, we include a steel safety wire alongside the leading edge of the blade.

Specifications:

• Length: 750 mm
• Width: 58/62 mm
• Root: 12 mm
• Bolt Hole: 5mm

VTX-717mm Premium Carbon RotorBlades B-Surface

These are slight seconds, only small cosmetic flaws, the odd lump, bump or run in the paint fantastic value for money!

No compromises- That was the VTX mindset when they set out to revolutionize the r/c helicopter rotor blade. From the very first sketches, outlining their goals, every decision made was performance based. It was not the easiest nor the fastest road, but it was the only way to design and bring to market the finest rotor blade available.

Form follows function taken to the next level- Literally every millimeter of the rotor blade is aero data driven. What does this mean? There were no preconceived notions of what the perfect rotor blade should or shouldn’t look like. The VTX team let the aerodynamics have the first and last word, just as it should be.

Unique- Not just a buzz word. Every size of VTX rotor blade is unique in form. That is because each size is unique in the way it performs best. Scalability was never an option. That would have been compromising the goal of bringing the finest rotor blade to the market.

Specifications:

• Length: Approx. 717mm
• Weight: Approx. 209g
• CG: Approx. 357mm from center of bolt
• Max Chord: 75mm
• Root: 12mm
• Bolt Hole: 5mm
• Safety: Internal Safety Chord

RotorTech 760mm Carbon Fiber Main Blades RT-760

• Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
  Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

    Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

•   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
•   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
•   Designed for your 3D performance.
•   Matched C.C.G. for stability.
•   Matched outward S.C.G. for better autos.
•   Airfoil designed for fast, accurate cyclic.
•   Layered for optimum aerodynamic damping.

Specifications:

•   Length: 760mm
•   Width: 66mm
•   Grip: >= 14mm
•   Hole: 5mm
•   Airfoil: Symmetrical
•   Tip: Aeroflat