Robbe-Schluter

Robbe-Schluter

Spare parts for Robbe SCHLUTER Millenium, Dyna-X, Futura, Nova, Cuatro and other Robbe helis

Products


  • DYX-0008 Tail Boom Spacer

    DYX-0008 Tail Boom Spacer

    Tail Boom Spacer , 1 piece

    SKU: SKU11150
    €12.00
    inc. VAT

     IN STOCK
  • DYX-0009 Skid Brace

    DYX-0009 Skid Brace

    1 piece of metal skid brace

    SKU: SKU11151
    €16.00
    inc. VAT

     IN STOCK
  • DYX-0010 Flat Frame Spacer

    DYX-0010 Flat Frame Spacer

    Flat Frame Spacer , SET OF 1

    SKU: SKU11152
    €10.00
    inc. VAT

     IN STOCK
  • DYX-0011 central engine mount

    DYX-0011 central engine mount

    Central engine mount

    SKU: SKU11153
    €10.00
    inc. VAT

     IN STOCK
  • DYX-0013 U-Shaped Engine mount

    DYX-0013 U-Shaped Engine mount

    Lower U-Shaped Engine mount

    SKU: SKU11154
    €10.00
    inc. VAT

     IN STOCK
  • DYX-0014 Bell Crank Spacer

    DYX-0014 Bell Crank Spacer

    Front Bell Crank Spacer

    SKU: SKU11155
    €8.00
    inc. VAT

     IN STOCK
  • DYX-0015 Threaded Round Spacer

    DYX-0015 Threaded Round Spacer

    M3 Threaded Round Spacer (1)

    SKU: SKU11156
    €5.50
    inc. VAT

     IN STOCK
  • DYX-0016 Unthreaded Round Spacer

    DYX-0016 Unthreaded Round Spacer

    Unthreaded Round Spacer ( 1)

    SKU: SKU11157
    €5.50
    inc. VAT

     IN STOCK
  • DYX-0017 Half Pitch Arm

    DYX-0017 Half Pitch Arm

    Half collective pitch arm

    SKU: SKU11158
    €9.00
    inc. VAT

     IN STOCK
  • DYX-0018 Pitch Double Arm

    DYX-0018 Pitch Double Arm

    double ended closed loop collective pitch arm.

    SKU: SKU11159
    €10.00
    inc. VAT

     IN STOCK
  • DYX-0019 Collective Shaft

    DYX-0019 Collective Shaft

    Collective pitch control shaft

    SKU: SKU11160
    €9.00
    inc. VAT

     IN STOCK
  • DYX-0020 Ground Plate

    DYX-0020 Ground Plate

    Ground Plate

    SKU: SKU11161
    €22.00
    inc. VAT

     IN STOCK
  • DYX-0024 Long Canopy mounts

    DYX-0024 Long Canopy mounts

    Two Long canopy alloy mounting

    SKU: SKU11144
    €12.00
    inc. VAT

     IN STOCK
  • DYX-0037 Round Spacer 5mm x2

    DYX-0037 Round Spacer 5mm x2

    Round Spacer 5mm x3 (2pc)

    SKU: dyx-0037
    €4.00
    inc. VAT

     IN STOCK
  • DYX-0050 Titan Pushrod

    DYX-0050 Titan Pushrod

    Collective pitch Push/pull rods . SET OF 2

    SKU: SKU11167
    €8.00
    inc. VAT

     IN STOCK
  • E-Millenium conversion set

    E-Millenium conversion set

    This is the Set including: Mount plate and Pinion needed to use when converting Millennium / Dyna-X to Electric.

    Motor Plate- Made from 7075 Aluminum, Anodized for Full oxide protection ( No real need, but we like our parts prefect ).
    If you use Dyna-X, we will supply Spacers to fit the frames.

    Pinion of choice Diameter 5 / 6 or 8mm / Module 1, Hardened Pinion, made from Stainless steel with special surface coating for perfect and quiet transmittion.

    Included in Set ( Product Options)

    • Motor Mount, made for 25mm screw distance motors
    • Hardware (Screws/Shims)
    • Spacers x 4( to fit Dyna-X) frames
    • Pinion of Choice (M1)
    SKU: RCM19065
    €55.00
    inc. VAT

     IN STOCK
  • E-Millenium conversion set with support

    E-Millenium conversion set with support

    This is the Set including: Mount plate, Pinion, and third bearing support,especially for very long shafts (48mm and longer). This is  all needed to use when converting Millennium/Dyna-X to Electric.

    Motor Plate- Made from 7075 Aluminum, Anodized for Full oxide protection
    If you use Dyna-X, we will supply Spacers to fit the frames.

    Pinion of choice Diameter 5 or 8mm, Hardened Pinion, made from Stainless steel with special surface coating for perfect and quiet transmittion.

    Included in Set (Product Options)

    • Motor Mount- made for 25mm screw distance motors
    • 3RD BEARING (S4605) for 5 or 6mm shaft
    • Hardware: 4 x HEX M3x8mm / 2 x HEX M3x50mm / 2 x M3 Locknut
    • Spacers x 4 (to fit Dyna-X) frames
    • Pinion of Choice
    SKU: RCM1906DOUBLE
    €69.00
    inc. VAT

     IN STOCK
  • ELEVATOR ARM SET

    ELEVATOR ARM SET

    ELEVATOR ARM SET

    SKU: SFH0027
    €9.30 €10.90
    inc. VAT

     LOW STOCK
  • ENGINE MOUNT SHIMS

    ENGINE MOUNT SHIMS

    ENGINE MOUNT SHIMS
    SKU: S4164
    €8.50 €9.95
    inc. VAT

     IN STOCK
  • EOLO - Alloy Headblock

    EOLO - Alloy Headblock

    A must for turbine smooth high speed running and accurate cyclic response. Crafted from solid in a single fully automated machining operation this headblock is supremely accurate, very strong and light.

    SKU: RCEO-098
    €53.00 €58.00
    inc. VAT

     LOW STOCK
  • EOLO Tail Drive  Block

    EOLO Tail Drive Block

    This component has been designed to prevent movement of the tail drive pinion gear. Often the threads in the original plastic unit are overtightened and damaged resulting in the gear lifting out of correct mesh. Our alloy unit provides secure threads that can be fully tightened time after time. Supplied complete with shorter M2.5 socket screws for minimal weight, new bearings are pre-installed. The completed assembly is no heavier than the stock plastic part.

    SKU: RCEO-099
    €22.00 €24.00
    inc. VAT

     LOW STOCK
  • Extreme 3D head-set

    Extreme 3D head-set

    Want to make your Robbe heli extreme 3D?This kit will make your head extremely responsive,

    SKU: SKU14243
    €17.00
    inc. VAT

     IN STOCK
  • FAN WHEEL 90

    FAN WHEEL 90

    FAN WHEEL 90

    SKU: S4870
    €12.90
    inc. VAT

     IN STOCK
  • FEATHERKEY 5X3X10

    FEATHERKEY 5X3X10

    FEATHERKEY 5X3X10

    SKU: S4122
    €2.00
    inc. VAT

     IN STOCK

Manufacturers

Back