Robbe-Schluter

Robbe-Schluter

Spare parts for Robbe SCHLUTER Millenium, Dyna-X, Futura, Nova, Cuatro and other Robbe helis

Products


  • Clutch bell Robbe Millenium, Nova, futura

    Clutch bell Robbe Millenium, Nova, futura

    Clutch bell Robbe Millenium, Nova, futura

    SKU: S4826
    €29.00 €45.00
    inc. VAT

     IN STOCK
  • CLUTCH CAP

    CLUTCH CAP

    CLUTCH CAP
    SKU: S4831
    €11.60 €13.60
    inc. VAT

     IN STOCK
  • CLUTCH HUB MILLENIUM

    CLUTCH HUB MILLENIUM

    CLUTCH HUB MILLENNIUM

    SKU: S4828
    €19.50 €24.50
    inc. VAT

     LOW STOCK
  • Clutch Lining material- for all Nitro, Gas motors - 10x30cm (1pc)

    Clutch Lining material- for all Nitro, Gas motors - 10x30cm (1pc)

    CLUTCH  LINING material, Thickness of 1.5mm , fits All nitro and gas motors using Clutch sytems.

    The biggest advantage of this material that its thicker than provided in the clutches material, and will fit better the clutch,preventing it from over openning and breaking.

    for more tips how to use it, contact us.

    Included clutch lining material +/-10x30cm, which should be enough for 5-8 liners.

    SKU: S4464
    €6.90
    inc. VAT

     IN STOCK
  • CNC fan 90mm

    CNC fan 90mm

    90 mm Metal Fan for Robbe 60-90 size helis, Pre-balanced with Special profile fins for increased cooling, direct replacement for standard 90 mm fan-shroud,pre-drilled for governor magnets

    SKU: RCUG-022
    €38.00 €58.00
    inc. VAT

     IN STOCK
  • CNC tail Metal Gearbox for Robbe

    CNC tail Metal Gearbox for Robbe

    CNC tail Metal Gearbox for Robbe, fits Millenium, Futura ( 24mm) , Cuatro.

    Anodized in Natural color. Fits 24mm booms, with special CNC made smoother gear.
    Ratio- 1:1 , This gearbox is Lighter then stock plastic gearbox .Beautiful and strong 1 piece design. Set complete with Ball bearings, Hardware, and pinions . Can be mounted Left or Right side.
    Double Tail scissor arm set included with the gearbox ( 64 eur value )Note:Tail Output Shaft and Plastic Tail Bridge S1038 are not included in the kit!

    This gearbox and all parts of it are produced in Europe.From now this is the most affordable and best gearbox
     

    SKU: RCRO-016
    €169.00 €219.00
    inc. VAT

     IN STOCK
  • COLL.PITCH COMPENSATOR

    COLL.PITCH COMPENSATOR

    COLL.PITCH COMPENSATOR ARM

    SKU: S4626
    €3.40 €4.00
    inc. VAT

     IN STOCK
  • COLLAR D5X17

    COLLAR D5X17

    COLLAR D5X17
    SKU: S4679
    €6.00 €7.00
    inc. VAT

     IN STOCK
  • COLLET 5 MM

    COLLET 5 MM

    COLLET 5 MM

    SKU: S0261
    €3.70 €4.40
    inc. VAT

     IN STOCK
  • CONTROL LEVEL

    CONTROL LEVEL

    CONTROL LEVEL F. SHEAR TAIL ROTOR

    SKU: S4334
    €13.50 €15.90
    inc. VAT

     LOW STOCK
  • CONTROL LEVER

    CONTROL LEVER

    CONTROL LEVER WITH BALL, 2 PCS

    SKU: S3533
    €14.90
    inc. VAT

     LOW STOCK
  • CONTROL SLEEVE (2XM)

    CONTROL SLEEVE (2XM)

    CONTROL SLEEVE (2XM2)

    SKU: S4339
    €10.20 €11.95
    inc. VAT

     IN STOCK
  • COUNTERSUNK SCREW 3X5 (4 pcs)

    COUNTERSUNK SCREW 3X5 (4 pcs)

    COUNTERSUNK SCREW 3X5 4PCS
    SKU: S4152
    €1.70 €2.00
    inc. VAT

     IN STOCK
  • DAMPER RUBBER

    DAMPER RUBBER

    DAMPER RUBBER, 2 pcs
    SKU: SFH0017
    €4.70 €5.50
    inc. VAT

     LOW STOCK
  • DOME BEARING BLOCK

    DOME BEARING BLOCK

    DOME BEARING BLOCK 8MM assembly
    SKU: S4667
    €22.90 €26.90
    inc. VAT

     IN STOCK
  • DOUBLE DAMPENING

    DOUBLE DAMPENING

    DOUBLE DAMPENING SET  MILL
    SKU: S1077
    €25.10 €29.50
    inc. VAT

     IN STOCK
  • Dowel Brass 6pc.

    Dowel Brass 6pc.

    Dowel Brass 6pc.

    SKU: S2620
    €5.00
    inc. VAT

     LOW STOCK
  • DRIVER YOKE M-8

    DRIVER YOKE M-8

    DRIVER YOKE M-8 PLASTIC

    SKU: S5105
    €1.70 €2.00
    inc. VAT

     LOW STOCK
  • Dual BB Millenium start block

    Dual BB Millenium start block

    Double Ball Bearing start system set including : Clutch bell, special Hardened Pinion , choice of 14-15-16T ( one pinion per set) , Ball Bearings, start block and hardware are included in a set, and those are a direct replacement for Millenium 2 / 3 and Dyna-X start system. Reduces movement of the Pinion during Extreme 3D, and protecting the pinion from been exposed to dust. Anodized in Clear.

    SKU: RCRO-018
    €98.00 €108.00
    inc. VAT

     IN STOCK
  • Dyna-X V2 Decal

    Dyna-X V2 Decal

    New Design, with beautifull logos of Dyna-XA4 size

    SKU: SKU14239
    €9.00
    inc. VAT

     IN STOCK
  • DYX-0001 Large X brace

    DYX-0001 Large X brace

    One large X brace

    SKU: SKU11146
    €11.00
    inc. VAT

     IN STOCK
  • DYX-0002 Small X Brace

    DYX-0002 Small X Brace

    One Small X brace

    SKU: SKU11147
    €10.00
    inc. VAT

     IN STOCK
  • DYX-0003/0004 Engine Mounts

    DYX-0003/0004 Engine Mounts

    Left and right engine mounts

    SKU: SKU11148
    €24.00
    inc. VAT

     IN STOCK
  • DYX-0007 Servo Rocker

    DYX-0007 Servo Rocker

    One piece of CNC Servo rocker.

    SKU: SKU11149
    €12.00
    inc. VAT

     IN STOCK

Manufacturers

Back