Receivers

Receivers

 Receivers for Radios , Spektrum, Futaba, Hitec, Webra

Products


  • MSH Micro Brain - Cable JST to Molex 50mm for Bluetooth

    MSH Micro Brain - Cable JST to Molex 50mm for Bluetooth

    Useful for connecting the CRIUS or similar bluetooth module to the Micro Brain

    SKU: MSH51625
    €4.90
    inc. VAT

  • Nine Eagles Galaxy Visitor 6 - Receiver with Blue LED

    Nine Eagles Galaxy Visitor 6 - Receiver with Blue LED

    Nine Eagles Galaxy Visitor 6 - Receiver with Blue LED

    SKU: NE253213
    €71.90
    inc. VAT

  • Nine Eagles Galaxy Visitor 6 - Receiver with Green LED

    Nine Eagles Galaxy Visitor 6 - Receiver with Green LED

    Nine Eagles Galaxy Visitor 6 - Receiver with Green LED

    SKU: NE253212
    €71.90
    inc. VAT

  • Optima 7 RX

    Optima 7 RX

    Full Range AFHSS 2.4GHz 7 Channel Receiver

    2 Boosted Omni Directional Antenna System in diversity mode integrated SPC system
    Smart Scan feature > Support Telemetry.
    dimensions: approx 57 x 21 x 11 mm

    SKU: MPX111061
    €55.00
    inc. VAT

     72HR STOCK
  • R-6004 FF 2,4 GHz

    R-6004 FF 2,4 GHz

    Ultra-light and small 4-channel 2.4 GHz FASST receiver for indoor and Park Flyers.
    Weight only 3,9 g, without housing only 3.3 g. No crystals, no frequency channel selection and the highest security against Immediately channel interference from 2.4 GHz FASST technology.
    Best suppression of interference by fast frequency hopping. High intermediate frequency of 800 MHz, resistant to electromagnetic signals .
    Simple connectivity through integrated EASY-link button. Suitable for all Futaba transmitters from 6-channels ,compatible to work in 7 channel - modulation

    Tech specs
    operating voltage : 4,8-7,4 Volt
    Current: 40 mA
    channels: 4
    resolution :2048 KHz
    Weight: 3,9 g (3.3 gr without case)
    size: 35 x 20 x 7 mm

    SKU: F0962
    €65.00
    inc. VAT

     72HR STOCK
  • R2008SB 2.4 GHz FHSS/S-FHSS

    R2008SB 2.4 GHz FHSS/S-FHSS

    Compact eight-channel FHSS/S-FHSS receiver, compatible with all FHSS and S-FHSS systems in the Futaba range. Also includes High Response mode for digital servos. Fail-safe settings are possible for all channels. As a special feature this receiver offers an S.BUS socket for up to eight S.BUS servos or other devices, in addition to the eight PWM servo outputs. Easy-Link button for simple binding to the transmitter.

    The Futaba R2008SB is a full range 8 channel receiver with built in S-Bus functionality. It also comes equipped to handle high voltage applications (up to 7.4v).

    • High-voltage operation.
    • Frequency-hopping Spread Spectrum design.
    • Dual Antenna Diversity.
    • S.Bus compatibility
    SKU: F1007
    €59.90
    inc. VAT

     IN STOCK
  • R2104GF 2.4 GHz S-FHSS

    R2104GF 2.4 GHz S-FHSS

    Small, lightweight 2.4 GHz FHSS four-channel receiver incorporating Frequency Hopping technology.

    No crystals, no spot frequency selection, and maximum protection from same-channel interference thanks to high-speed 2.4 GHz FHSS technology. High-speed Frequency Hopping for effective suppression of interference signals.
    Automatic switching between S-FHSS (High-Speed mode - only in conjunction with digital servos) and FHSS mode.

    Frequency Hopping system with thirty channels at 1.5 MHz spacing in the 2404 - 2447.5 MHz range. Maximum 28 simultaneous users.
    Not compatible with FASST transmitters. Only for FHSS systems such as T2PL, T3PL, T4YF, T4PL, T6JG)
    Not recommended for large-scale model aircraft and jets.
    Range: approx. 1000 m

    Specification: Channel spacing: 4.00 Weight: 8 g Dimensions: 39 x 26 x 12.5 mm mm Voltage: 4.8-7.4V Volts

    SKU: F0996
    €56.00
    inc. VAT

     72HR STOCK
  • R6GF 6CH Receiver

    R6GF 6CH Receiver

    R6GF 6CH Receiver

    • Brand new 6 channel receiver featuring latest FHSS (Frequency Hopping Spread Spectrum)2.4Ghz system, with high transmission speed, extremely low latency, bulletproof reliability, and value pricing.
    • Compatible with both FHSS and S-FHSS transmission modes.
    • Support 7.4v high voltage input using 2S 7.4v lipo battery. Please ensure high voltage compatibility of all other equipment when high voltage is used. A voltage regulator is recommended at voltage input.
    • Failsafe capability

    Specifications:

    • 6-Channel-2.4GHz S-FHSS transmitter(Up to 4-Channel at 2.4GHz FHSS system)
    • Suitable Voltage Range : 4.8 - 7.4V
    • Current drain: 80mA
    • Size:38×21×10 mm
    • Weight:4g
    • NCC ID: CCAB11LP457AT9

    Compatible with the following transmitters:

    • ALIGN :T6
    • FUTABA:T18MZ, TM-FH, T14SG, T8J, T6J, T4YF, T4PL, T3PRKA, T3PL, T2PL
    SKU: HER6GF01
    €56.00
    inc. VAT

     LOW STOCK
  • R7008HV 8 -14ch FASST Futaba long range Compatible Receiver

    R7008HV 8 -14ch FASST Futaba long range Compatible Receiver

    This is a long range high voltage receiver and is an excellent value for the price.

    Compatible with futaba fasst system.

    • Two receivers can be used as a 14 channel FASST compatible receiver
    • Two selectable failsafe setting options (use native failsafe on radio side or set failsafe on one's side)
    • Operating Voltage Range: 3.5~8.4 V
    • Number of Channels: 8-14
    • Dimensions: 47.5 X25.3 X15mm
    • Weight    11g
    • Two failsafe setting options (use native failsafe on radio side or set failsafe on Rx side).
    • Improve capability of anti-interference.
    • Firmware updated.
    • Compatible with 7CH mode or Multi mode, it can be compatible: 6EX, 7C, TM-7, TM-8, T8FG, T10C,TM-10, T10CG, T12Z, T12FG, TM-14, T14MZ, 14SG, 18MZ.

    C1 mode of gun control, can be compatible: 4PK, 3PK,4PKS-R , 3PM-X

    SKU: KSR7008HV
    €39.00
    inc. VAT

     72HR STOCK
  • R9D 2.4G 9channel receiver DSSS used for the item Radiolink AT9

    R9D 2.4G 9channel receiver DSSS used for the item Radiolink AT9

    R9D 2.4G 9channel receiver DSSS used for the item Radiolink AT9

    FEATURE:

    1. DSSS technique, super anti-interference
    2. RX voltage and signal strength telemetry, extensional sensor for EP, Temperature, RPM, GPS etc.
    3. S.BUS. CH9 is set for S.BUS
    4. All 9channel needs 3ms to response parallel
    5. Section precision 4096, stable the servo, rudder shaking free.
    6. HV input up to 10V
    7. MINI design for convenient assembling

    Technical Parameters

    SPEC.:

    1. Channel: 9channel, CH9 is for S.BUS
    2. Max input voltage: 10V
    3. Current: 38-45 mA(Voltage input: 5V)
    4. Size: L×W×H=43×24×15
    5. Section precision 4096

    SKU: R9D
    €18.90 €23.90
    inc. VAT

     IN STOCK
  • Radiolink R10D 10-CH 2.4GHz DSSS Receiver

    Radiolink R10D 10-CH 2.4GHz DSSS Receiver

    R10D, 2.4G 10channel receiver, DSSS and use for Radiolink TX AT9 and AT10.

    FEATURES:

    1. DSSS technique, super anti-interference

    2. RX voltage and signal strength telemetry, extensional sensor for EP, Temperature, RPM, GPS etc.

    3. All 10channel needs 3ms to response parallel

    4. Section precision 4096, stable the servo, rudder shaking free

    5. HV input up to 10V

    SPECS:

    1. Channel: 10channel.

    2. Max input voltage: 10V

    3. Current: 38-48mA (voltage 5V)

    4. Size: L×W×H=50×32×15

    SKU: R10D
    €27.00
    inc. VAT

     72HR STOCK
  • RadioLink R6D DSSS Receiver for AT9 AT10

    RadioLink R6D DSSS Receiver for AT9 AT10

    High Quality Original 2.4G 6CH RadioLink R6D DSSS Receiver for AT9 AT10 Transmitter RC Helicopter

    R6D 2.4G 6channel receiver DSSS used for the item Radiolink AT9 and AT10.

    Feature:

    • 1. DSSS technique, super anti-interference.
    • 2. RX voltage and signal strength telemetry
    • 3. All 6 channel needs 3ms to response parallel.
    • 4. Section precision 4096, stable the servo, rudder shaking free.
    • 5. HV input up to 6V.
    • 6. MINI design for convenient assembling and operating.

    Specifications:

    • Channel: 6channel
    • Max input voltage: 6 V
    • Current: 38-45 mA Voltage input: 5V
    • Size: L*W*H=38*16*11mm
    • Section precision 4096
    •  weight: 3.9g

    Package list:

    1 * RadioLink R6D 2.4G 6CH DSSS Receiver

    SKU: R6D
    €16.00
    inc. VAT

     IN STOCK
  • RD810 2.4GHz DSM2 & DSMX Compatible 8 Channel Receiver

    RD810 2.4GHz DSM2 & DSMX Compatible 8 Channel Receiver

    The  RD810 2.4 ghz 8 channel receiver is compatible with all DSM2 and DSMX aircraft radios. Range is 800+M or more with proper installation.

    Important things to remember when installing and using any 2.4ghz receiver:

    • Keep away from other electrical components, such as the Motor, ESC and servos.
    • Turn on your transmitter before connecting power to the receiver (except when binding).
    • Provide reliable power to the receiver.
    • Carefully check all connections.
    • Perform a range check, as described in your transmitter manual.

    Note:
     
    This receiver is compatible with Spektrum DSM2 amd DSMX radios, but it is not a Spektrum brand receiver. The Spektrum brand is a trademark of Horizon Hobbies USA.

    • Dimensions:  1.81" x 0.94" x 0.55" (46mm x 24mm x 14mm)
    • Dual antennae:  5.41" (13.75cm) each
    • Weight:  0.35 oz. (10 grams)
    • Operating Voltage:  4.8v - 8.4v
    • 8 Channels:  Throttle, Aileron, Elevator, Rudder, Gear/PPM output, Aux 1, Aux 2, Aux 3, plus battery/bind port.  This receiver also features a data port.  
    • Range: 800M+ (2500+ feet)/Full Range
    • Compatible with Spektrum and JR DSM2 and DSMX aircraft radio and module systems.
    SKU: KSRD810
    €19.00
    inc. VAT

     IN STOCK
  • RS610 2.4GHZ 7CH DSM2/DSMX SPEKTRUM Compatible receiver PPM PWM

    RS610 2.4GHZ 7CH DSM2/DSMX SPEKTRUM Compatible receiver PPM PWM

    RS610 2.4GHZ 7CH DSM2/DSMX SPEKTRUM Compatible receiver PPM PWM

    • Frequency: 2.400Ghz-2.4800Ghz
    • Application protocol: DSM2, DSMX
    • Application technology: The technology of requency hopping spread spectrum DSSS
    • Output Signal: PPM, PWM, S.bus
    • Communication distance: >300m
    • Power source: 3.7V-5.5V
    • Dimensions: 32mm*19mm*12mm
    • Dimensions: 3.9g

    Features:
    1. With DSSS technology,support DSMA agreement
    2. Support min USB wireless softdog simulator function
    3. Support fixed Sbus output
    4. As with cable output,support PWM PPM Sbus signal input with 32bit RAM CPU

    Simulator Function:
    1. Support Phoenix Rc 5 wireless simulator function, you canhave fun with wireless practising and wireless flighting, to release the fetter of the computer simulator's signal
    2. Automatic recognition PWM PPM Sbus while with wireless mode
    3. Regular receiver function,the wight with softdog is less then 4g.

     Product Binding:
    1.Shut down radio,receiver to electricity, about 30 seconds (or directly on the top of code button), high-speed receiver flashing, the receiver bind, the remote antenna when you try to close to the receiver antenna position.
    2.open the radio and start to bind.
    3.The receiver binding successful, then the LED normally on.

    SKU: KSRS610
    €19.00
    inc. VAT

     IN STOCK
  • SF810 2.4GHZ 8CH s-FHSS compatible FUTABA receiver PPM SBUS

    SF810 2.4GHZ 8CH s-FHSS compatible FUTABA receiver PPM SBUS

    SF810 2.4GHZ 8CH FHSS compatible FUTABA receiver PPM SBUS

    • Frequency: 2.400Ghz-2.4800Ghz
    • Application protocol: s-fhss
    • Output Signal: PPM, PWM, S.bus
    • Communication distance: >300m
    • Power source: 3.7V-8.5V
    • Dimensions: 48mm*26mm*12mm
    • Dimensions: 11g
    SKU: KSSF810
    €24.00
    inc. VAT

     IN STOCK
  • SP800 0.8g Ultralight S-BUS/CPPM 1s Receiver DSM2 DSMX Compatible Range 300m

    SP800 0.8g Ultralight S-BUS/CPPM 1s Receiver DSM2 DSMX Compatible Range 300m

    SP800 0.8g Ultralight S-BUS/CPPM 1s Receiver Compatible with DSM2 DSMX Range 300m delivers high performance signal receiving for a smooth and joyful piloting experience. It supports S-BUS/CPPM output and is compatible with DSM2 and DSMX transmitter modules.

    Weighing merely 0.8 grams, this ultralight receiver is designed specially for mini indoor quadcopters. The communications range can reach more than 300 meters. It also boasts a wide input range that allows it to operate with 3.7V to 5.5V electrical systems.

    Features:

    • Support S-BUS/CPPM output
    • Compatible with DSM2 and DSMX transmitter modules
    • Weigh merely 0.8 grams, ultra small and light
    • Designed specially for mini indoor quadcopters
    • Communications range can reach more than 300 meters
    • Stable performance, high reliability

    Specifications:

    • Output: S-BUS/CPPM
    • Compatible Transmitter: DSM2 DSMX
    • Working Voltage: 3.7-5.5V
    • Communication Range: >300m
    • Dimensions: (0.67 x 0.51 x 0.20)" / (1.7 x 1.3 x 0.5)cm (L x W x H)
    • Weight: 0.03oz / 0.8g

    Package Includes:
    1 x SP800 Receiver

    SKU: KSSP800
    €13.00
    inc. VAT

  • TBS CROSSFIRE 8Ch Diversity Rx

    TBS CROSSFIRE 8Ch Diversity Rx

    The TBS CROSSFIRE 8ch Diversity Receiver is a compact R/C receiver with 8ch PWM outputs (PPM, SBUS and CRSF capable), with best-in-industry noise-rejection and record-breaking range capability. It is the only receiver to provide true dual-input stage, chip based diversity, with the usual filtering and noise rejection from on-board video systems.

    includes:

    •     TBS Crossfire 8Ch Diversity Rx
    •     TBS Crossfire Stock Rx Antenna(2pc)
    •     BST splitter (one input to three output)
    •     BST cable(20cm)
    SKU: TBS-DIVER-RX
    €110.35
    inc. VAT

     LOW STOCK
  • TBS Crossfire micro receiver V2

    TBS Crossfire micro receiver V2

    A super-tiny, super-lightweight UHF long range receiver. Perfect match for your mini- or micro-quads as well as 4ch aircraft. It now comes with a servo-adapter board for high-current servos and 4ch PWM connectivity (requires software update to your Crossfire TX!)

    Weight: 3.32g(V2)

    SIze:4x1.4x0.95(cm)

    Includes

        1x TBS Crossfire Micro Receiver
        1x TBS Crossfire Micro RX Adapter
        1x TBS Crossfire Micro RX Adapter Cable
        1x Spare antenna
        1x Spare shrink tube
        1x TBS Vendetta(BST) cable
        1x TBS Powercube cable
        1x Standard RC cable

     

    SKU: TBS-CROSSFIRE-MICRO
    €33.99
    inc. VAT

     LOW STOCK
  • TBS Crossfire Micro TX

    TBS Crossfire Micro TX

    The Crossfire module boiled down to its pure essence for long range up to 40km, and FPV racers that need ultra low latency.

     Features:

    •     Long range, adaptive and robust remote control system for your aircraft
    •     Immune to on-board noise
    •     Two-way communication link with real-time link vitals and telemetry
    •     Self-healing & frequency hopping (DSSS, FHSS)
    •     Adaptive bandwidth control and range optimization
    •     RX beacon mode to recover your downed aircraft
    •     Super easy binding and configuration via built-in display of your R/C
    •     Low latency, 150Hz update rate (3x faster than typical RC links) control for perfect immersive feeling
    •     Two receiver models: 8 port Diversity Rx, 4 port Mini-receiver (4g weight!)
    •     8 or 12ch output via SBUS/PPM/CRSF on both receivers
    •     Ability to fly with multiple friends at the same time (10 or more)
    •     Selectable RF power from 25mW to 250mW (local restrictions apply)
    •     Transmitter LED shows link health
    •     Micro-receiver for smaller drones. Smaller than you think!
    •     Software updates via RF Link

     
    Technical specifications:

    •     Frequency Band: 868MHz
    •     Input Voltage: 3.5 - 13V
    •     Power consumption: 1.1W (@10mW) - 2W (@100mW)
    •     Dimensions: 65 x 48 x 22 mm (JR module size)
    •     Weight: 48g

     Package includes

    •     TBS Crossfire Micro Transmitter (JR module)
    •     TBS Crossfire Stock Tx Antenna V2

     

    SKU: TBS-CROSS-MTX
    €75.95
    inc. VAT

     LOW STOCK

Manufacturers

Back