PROXXON tools

Description

Selected quality steel. Functional and rugged design. Shaft and drill part made from one piece. Optimum concentricity. Good hardness ensures long life and good elasticity. For working metals, non-ferrous metals, plastics, circuit boards, soft woods and hard woods.

Highlights & details

•     0.8 mm
•     Length 44 mm
•     Shank diameter 2,35 mm
•     3 pc(s)

Technical data

• Material: HSS
• Tool holder: Cylinder shank
• Shank Ø:2.35 mm
• Length: 44 mm
• (Ø): 0.8 mm
• Working length: 6 mm
• Drill hole Ø: 0.8 mm
   

1.2mm HSS microdrill

• High concentricity and accuracy
• Shank and bit made from a one-piece blank
• High hardness for the long life
• For drilling metal, non-ferrous metals, plastic, PC cards and wood All shafts are 2.35mm
• Supplied in packs of 3 per size.

PROXXON Delta sander OZI/E

For grinding surfaces in very tight spots, e.g. corners, sides and inaccessible areas.
The oscillating motion ensures quiet operation and also facilitates cutting. Insert and file!
The variable speed facility ensures the correct speed for every material. Special, balanced, low noise DC motor with high life expectancy.
Main housing of glass-fibre reinforced POLYAMIDE.
Complete with 4 sanding discs (2x 80 grit, 1x 150 grit and 1x 240 grit). In an attractive case.
The heart of our MICROMOT precision tools for 230V: the direct current (DC) special motor.

Technical data:

• 230V.
• 100W.
• Sanding frequency of 3,000 - 10,000rpm.
• Length 230mm.
• Weight 550g.
• Insulated to class 2.

Note:
The self-adhesive sanding pads ensure quick changing and optimum usage. Simply remove and rotate through 120° for a fresh corner.

Sanding pads for OZI/E
High durability corundum (aluminium oxide) pads. Grain filled with special filler to prevent premature clogging. Deposited on special backing paper. Self-adhesive.
NO 28 891           80 grit           25 pieces
NO 28 893           150 grit           25 pieces
NO 28 895           240 grit           25 pieces

HSS cutting blade for OZI/E
Oscillates, making it ideal for cutting metal, wood, PC cards, plastics, plaster of Paris and many other materials. The segment cut facilitates exact cutting right into corners.
NO 28 900Ø 65mm, 160 teeth

Diamond cutting blade for OZI/E
Operation as described above for the HSS blade. Cuts marble, bricks, dry walling and many other materials. Ideal for interior finishing and sanitary and electrical installation.
NO 28 902Ø 65mm

HSS immersion saw blades for OZI/E
For exact square excavations and other forms. For making hatchways and windows in ship and aircraft models. Cuts wood, plywood, plastics and aluminium. Max. immersion depth 16mm.
NO 28 897     Saw blade width     8mm
NO 28 898     Saw blade width     14mm

For precision square excavations, HSS immersion saw blades are available with an 8 and 14mm width of cut.

PROXXON Long neck angle milling/drilling unit LWB/E

With a set of gears running on several ball bearings in a stable, die-cast aluminium housing head.
Also suitable for right-angled separation of rods. With a special balanced, powerful, quiet and long-lasting DC motor. Infinitely variable rpm (full wave electronics). Main housing is made of glass-fibre reinforced POLYAMIDE. Safely stored in an attractive and extremely stable case made from high-grade polypropylene. With MICROMOT hardened steel collets (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm).
The heart of our MICROMOT precision tools for 230V: the direct current (DC) special motor.

Technical data:

• 230V.
• 100W.
• 3,000 - 15,000rpm.
• Length 270mm.
• Weight 550g.
• Insulated to class 2.

Note:
MICROMOT steel collets are hardened and thus have a high, consistent flexibility.
They also maintain prolonged accuracy, even after regular use (these collets should not be compared with unhardened, fourslit collets of brass and aluminium). The triple slit collet is substantially more difficult to manufacture than the four-slit type, but offers a better load-bearing surface. This is especially important for cutters with small shaft diameters.

Storage case of high-grade polypropylene.
Attractive design, very sturdy and large enough to put the machine back in the case after completing work, without having to "fumble". A label on the side identifies the contents.

PROXXON MICROMOT glue gun HKP 220

Quick and reliable gluing of metal, wood, plastic (including Plexiglass), glass, ceramics, stoneware, cardboard, leather, polystyrene foams and textiles.
Depending on the material and on the adhesive quantity applied, the adhesive sets after about 30 seconds, allowing positional corrections within this period of time (impossible with instant glues).
The 7mm glue sticks are perfect for delicate work such as model building, toy and jewellery making, dried flower arrangements, etc. Sensitive mechanical feed ensures correct glue quantity delivery.
Integral stand positions gun on worktop when not in use. Short heating time.

Technical data:
230V. PTC controlled element for exact temperature of 200 °C. Four glue sticks 7 x 100mm and 3 interchangeable metal nozzles are included in the set.

Replacement glue sticks for HKP 220: PRX-28194 (12 pcs)

Can be used on metal, wood, plastic, ceramics, cardboard, leather, polystyrene foams and textiles.
Diameter 7mm.
Length 100mm.
Colourless.

PROXXON Professional drill/grinder IBS/E

Precision drill/grinder
Strength comes from quality!

For drilling, milling, grinding, polishing, cleaning, carving and engraving.
The maximum speed of 20,000rpm is continuously variable down to 5,000rpm. The full wave electronic speed control results in virtually constant torque, even at lower speeds, in turn facilitating micro drilling, cleaning and polishing.
The spindle runs in a precision ball bearing and is lifted with a lock button. The 20mm collar fits MICROMOT drill stands and vices.
The machine is fitted with a special, balanced, low noise DC motor with high life expectancy. Stable housing of glass-fibre reinforced POLYAMIDE with soft components in the finger grip area.
Complete with 43 quality inserts in a sturdy plastic case.
The heart of our MICROMOT precision tools for 230V: the direct current (DC) special motor.

This high-revving, special balanced, low noise direct current (DC) special motor has fullwave electronic speed control.
The ground steel spindle runs in a ball bearing. Six high concentricity MICROMOT collets, (1.0 - 1.5 - 2.0 - 2.4 - 3.0 and 3.2mm and closure nut) are included.

Technical data:

• Speed 5,000 to 20,000rpm.
• Power consumption (max) 100W, 230V.
• Stable head of die-cast aluminium and main housing of glassfibre reinforced POLYAMIDE.
• Length 230mm.
• Weight approx. 500g.
• Insulated to class 2.
• The 20mm MICROMOT collar allows fitting of optional drill stands, horizontal stands, etc.
• Supplied with 34 bits and cutters in a stable plastic case.