Drone & FPV Motors

Drone & FPV Motors

Motors especially designed for Multi-rotors, with minimal or no vibration tests, fully dynamic balanced.

Products


  • Avizar Combo Upgrade for SKY Hero Spyder, Spy, Spyder 6

    Avizar Combo Upgrade for SKY Hero Spyder, Spy, Spyder 6

    This is an upgrade ( electronics set) for Sky hero Spyder and Spy (Frame is Not included)

    Combo available in Different versions and will include:

    Combo 1 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, No Flight controller
    Combo 2 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, Naza V2
    Combo 3 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, Wookong M
    Combo 4 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, APM 2.5, GPS
    Combo 5 For Spyder : 4 motors x3 470KV, 4 esc 40AMPS, SK SOFT, 4 CF props 13 or 14", Wire set, Pixhawk, GPS

    Combos below can be used for Spy and Spyder 6

    Combo 6 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, No Flight controller
    Combo 7 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, Naza V2
    Combo 8 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, Wookong M
    Combo 9 For Spy: 6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, APM 2.5, GPS
    Combo 10 For Spy:6 motors x3 470KV, 6 esc 40AMPS, SK SOFT, 6 CF props 13 or 14", Wire set, Pixhawk, GPS
    SKU: AV09-4NFC
    €360.00
    inc. VAT

     IN STOCK
  • Avizar Multicopter Motor MC2312-960KVm ,Phantom upgrade! set of 2

    Avizar Multicopter Motor MC2312-960KVm ,Phantom upgrade! set of 2

    The new 2312 motor adopts a pioneering stator winding,offers improved heat dissipation. With its impact-resistant bearings-the system is more durable than ever before. The electromagnetic design, tailored for the DJI Phantom, has effectively improved the output power, and when used with the 9X4.5-9x5 propellers your whole propulsion system can provide 200g/axis more maximum output thrust when using a 3S LiPo battery.
    Additionally, this new propulsion system allows you to load more equipment on your Phantom without sacrificing flight time, offering you a better flight experience. 

    Specifications:

    • Motor Weight: 60Gr
    • Stator size 23x12mm
    • recommended propeller:9 x 4.5-5"
    • No-load current : 0.4Amp
    • Thrust:680 gr with 9x4.3 prop, 11 Amps, 11830 RPm

    Delivered: set of 2 motors(1 CW and 1 CCW)

     

    SKU: MC2312-960
    €39.00
    inc. VAT

     LOW STOCK
  • Avizar Multicopter Motor MC2810-950KV, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC2810-950KV, fits 400-500 size models, 4-6S

    MC2810-950kv is a high torque motor especially developed for the 450-500 CLASS  Multi-rotors platforms 

    Fits Spyder Little, F550, and many others.

    As advantage that it can be used with 9-11" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    - Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    - Heat, 25% lower heat generation thanks to Japanese NMB bearings, resistant to vibrations.

    Specifications:

    •   No-load speed: 950 KV
    •   Load current: 27 Amps
    •   Max Watts : 400w
    •   No load current: 0.7 Amps
    •   Japan NMB bearings
    •   Weight: 60gr
    •   Motor Diameter :35 mm
    •   Recommended Battery: 4-6 S
    •   Propellers to use: from 9-11"

    Included:

    •   MC2810 motor.
    •   Propeller mount with screws, Nut and Cup.

    Sample testing data is below.

    Volts-14.8  4S Amps Watts Torque-gr
    Prop- Graupner 10x5 1 13 120 gr
      4 57 395 gr
      10 143 850 gr
      16 230 1200 gr
    Volts-14.8 4S Amps Watts Torque
    Prop- Graupner 11x5 1 13 143 gr
      4 57 410 gr
      10 143 930 gr
      16 230 1350 gr
    SKU: MC2810-950KV
    €32.00
    inc. VAT

  • Avizar Multicopter Motor MC2834-1100KV, fits 400-450 size models, 4-6S

    Avizar Multicopter Motor MC2834-1100KV, fits 400-450 size models, 4-6S

    MC2834-1100kv is a high torque motor especially developed for the 450 CLASS  Multi-rotors platforms 

    Note- for those who want to fly Acrobatic Quads, or Speed model: 6S configuration with  7-9" prop, you will get a LOT of speed, up to 140 km/h. we recommend it only for those who experienced in FPV or Quads flying.

    Fits Spyder Little, F550, and many others.

    The big advantage that it can be used with 8-10" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    2- Heat, 25% lower heat generation thanks to ceramic bearings.

    3- Japanese NMB bearings, highest resistance to vibrations.

    4- 40cm cables, will allow direct connection to esc, wherever located.

    Specifications:

    •   No-load speed: 1100KV
    •   Load current: 22 Amps
    •   No load current: 0.8 Amps
    •   Long cables (40cm)
    •   Japan NMB bearings
    •   Weight: 81gr
    •   Motor Diameter :28.5 mm
    •   Recommended Battery: 4-6S
    •   Propellers to use: from 8-10"

      Included:

      MC2834 motor, 40cm wires
      Propeller mount with screws, Nut and Cup.

    Example test data

    Voltage (V) Prop (inch) Load current(A) Power(W) Thrust(G) Efficiency (G/W)
        11.1V      10*6          19,8    219,78    1000          4,55

     

    SKU: MC2834-1100
    €29.00
    inc. VAT

     IN STOCK
  • Avizar Multicopter Motor MC3525-930KV, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC3525-930KV, fits 400-500 size models, 4-6S

    New version availiable,. replacing this 930KV, improoved stator, better performance.
    Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S Will be delivered instead.

    SKU: MC3525-930
    €29.00
    inc. VAT

  • Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S

    MC3525-950KV is a high torque motor especially developed for the 450-500 CLASS  Multi-rotors platforms THIS Motor is a tuning V2 version for the older motor 3525-930kv

    Fits Spyder Little, F550, and many others.

    As advantage that it can be used with 9-11" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    - Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    - Heat, 25% lower heat generation thanks to Japanese NMB bearings, resistant to vibrations.

    Specifications:

    •   No-load speed: 950 KV
    •   Load current: 22 Amps
    •   Max Watts : 325
    •   No load current: 0.8 Amps
    •   Japan NMB bearings
    •   Weight: 60gr
    •   Motor Diameter :35 mm
    •   Recommended Battery: 4-6 S
    •   Propellers to use: from 9-11"

    Included:

    •   MC3525 motor
    •   Propeller mount with screws, Nut and Cup.

    Sample testing data is below.

    Volts-14.8  4S Amps Watts Torque-gr
    Prop- Graupner 10x5 1 13 120 gr
      4 57 395 gr
      10 143 850 gr
      16 230 1200 gr
    Volts-14.8 4S Amps Watts Torque
    Prop- Graupner 11x5 1 13 143 gr
      4 57 410 gr
      10 143 930 gr
      16 230 1350 gr
    SKU: MC3525-950
    €29.00
    inc. VAT

     IN STOCK
  • Avizar Multicopter Pancake Motor MC4014-330KV

    Avizar Multicopter Pancake Motor MC4014-330KV

    Avizar MC4014 Brushless MultiRotor Motor 330kv, Specially made for Monster quads, for 6S setups.

    Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference just by turning them, and hear the difference on the run!  

    This motor has been custom designed in Europe, and tested during 2 years, and found to be the most efficient for most multi-copters from 700cm and up, due its features.

    So what is so special in this motor:

    1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    2- Heat, 25% lower heat generation thanks to ceramic bearings.

    3- Ceramic hybrid bearings, and the motor has 3 of them: Radial forces of motor taken away with the help of those special bearings, which also self lubricated,the smoothness of the motor felt directly with the throttle reaction.

    4- Special size and low profile of cage and motor shaft will allow perfect setup and perfect performance on any setup, single or coaxial.

    Features:

    • Sealed Japanese Ceramic Hybrid bearings
    • Short, hardened Japanese steel shaft
    • 0.2mm NdFeB stator plates
    • Includes 6mm, prop adapter, and mounting plate
    • Oversized motor wires 3.3mm, silicone, for long and safe mounting.

    Specifications:

    •   Model: MC4014-330KV
    •   Config: 18N24P
    •   Motor size: 44.8L x 34.5 mm
    •   Weight: 149g
    •   KV(rpm/v): 330
    •   Max Power Continuous: 750W
    •   Max Current: 25A
    •   Max Efficiency Current: 3 - 10A >84%
    •   Battery: 4 - 8s LiPo, optimal for 6S
    •   Prop: 13"- 18"
    •   Internal resistance :85mohm

    Included:

    • Motor with 60cm wires x1
    • Prop adaptor for normal prop with 8mm shaft x1
    • Prop adaptor for Flat props x 1
    • Prop adaptor Screws.
    SKU: MC4014-330
    €79.00
    inc. VAT

     IN STOCK
  • Avizar X3 470KV Multi-Rotor Brushless Motor

    Avizar X3 470KV Multi-Rotor Brushless Motor

    Multirotors are used in many projects. because of High demands, longer flying times, heaver loads and Extreme climate conditions, there is a growing demand for Higher quality motors.
    Delivering best demands, designed for Water proof and dust resistance, X3 motors give you more value.

    X3 motor delivered in Black coating Matt finish, it fits 35mm motor mounts.
    Delivered with original Japanese bearings, Dynamically balanced for Zero vibrations.

    Fits 4-8S lipos, tested with props 12-14"( see table below)

    Delivered with Standard shaft adapter for Conventional props and Flat adapter for Flat props.

    Specifications:
     

    • KV :470
    • Config: 12N14P
    • Shaft Diameter: 4mm
    • Motor Dimension :34.8х34.2
    • Weight : 120g
    • Current Idle :0.5A
    • No.of Cells: 4-8S Lipo
    • Continuous current(A) 180S :25A max
    • Continuous Power(W)180S :450W max
    • Max. efficiency current: (6-15A)>85%
    • Internal resistance :170mΩ

    SKU: MCX3-470KV
    €49.90
    inc. VAT

     IN STOCK
  • BL A2204-14 1400KV

    BL A2204-14 1400KV

    A2204-14 1400KV Outrunner Brushless Motor

    Those motors produced OEM by strict requierments: Extra Low Vibrations, Balanced core and outside corps, Thicker Wire- are just part of the features those motors comes with.

    They made especially for FPV/Multirotors products, however they can be used on other products as well.
    Benefit from Highest quality at the low price due the mass production.

    Model: 2204-14
    Motor size: Ф28*12mm
    Shaft size: Ф3.175mm
    Weight: 22g
    KV(rpm/v): 1400
    Max Power: 97W
    Battery: 2-3Li-Po
    Test Prop: 6030/7040
    Ri(M Ω): 0.270
    ESC(A): 10A

    SKU: RCTA2204-1400KV
    €19.00
    inc. VAT

     IN STOCK
  • CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CCW)

    Operating condition:

    • Rated voltage     3.2V DC
    • Direction of rotation     CW and CCW
    • Operating voltage range DC3.0-3.7V DC
    • perating temperature ran ge  -10-50°C
    • Motor position     all position

    Description:

    • Motor Diameter: 7mm
    • Motor Length: 20mm
    • Shaft Diameter: 1.0mm
    • Cable Length: 60mm
    • Weight: about 5g
    • Option: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White)
    • Plug: Without plug
    • Quantity: 1 pcs
    SKU: M090-720-CCW
    €5.00
    inc. VAT

     IN STOCK
  • CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL 720 7x20mm Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CW)

    Operating condition:

    • Rated voltage     3.2V DC
    • Direction of rotation     CW and CCW
    • Operating voltage range DC3.0-3.7V DC
    • perating temperature ran ge  -10-50°C
    • Motor position     all position

    Description:

    • Motor Diameter: 7mm
    • Motor Length: 20mm
    • Shaft Diameter: 1.0mm
    • Cable Length: 60mm
    • Weight: about 5g
    • Option: Clockwise Motor(With Red Blue), Anti-clockwise Motor(With Black White)
    • Plug: Without plug
    • Quantity: 1 pcs
    SKU: M090-720-CW
    €5.00
    inc. VAT

     IN STOCK
  • CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CCW)

    Description:

    • Motor Diameter: 8.5mm
    • Motor Length: 20mm
    • Shaft Diameter: 1.0mm
    • Cable Length: 60mm
    • Weight: about: 5.3g
    • Option: Clockwise Motor(With Red Blue Wire), Anti-clockwise Motor(With Black White Wire)
    • Plug: Without plug
    • Quantity: 1 pcs
    • This 8520 coreless motor support 2S battery

    Operating condition:

    • Rated voltage     7.0V DC
    • Direction of rotation     CW and CCW
    • Operating voltage range  DC3.0-7.4V DC
    • perating temperature range  -10-50°C
    • Motor position     all position

     

    SKU: M089-8520-CCW
    €5.00
    inc. VAT

     IN STOCK
  • CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame

    CL-820 8.5x20mm 2S 7.4V Coreless Motor for 90mm-150mm DIY Micro FPV RC Quadcopter Frame (CW)

    Description:

    • Motor Diameter: 8.5mm
    • Motor Length: 20mm
    • Shaft Diameter: 1.0mm
    • Cable Length: 60mm
    • Weight: about: 5.3g
    • Option: Clockwise Motor(With Red Blue Wire), Anti-clockwise Motor(With Black White Wire)
    • Plug: Without plug
    • Quantity: 1 pcs
    • This 8520 coreless motor support 2S battery

    Operating condition:

    • Rated voltage     7.0V DC
    • Direction of rotation     CW and CCW
    • Operating voltage range  DC3.0-7.4V DC
    • perating temperature range  -10-50°C
    • Motor position     all position

     

    SKU: M089-8520-CW
    €5.00
    inc. VAT

     IN STOCK
  • Cobra CM-2206/20 Multirotor Racing edition 2100KV

    Cobra CM-2206/20 Multirotor Racing edition 2100KV

    Cobra Brushless Multirotor Motors offer performance and value for Your RC Models. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all sides, with separate compartments to protect the motor and accessory pack.

    The CM-2206-20 Racing Edition Motor was designed from the ground up to be the ultimate power source for 250mm FPV Racing Quads running on 4-cell Li-Po power! With 6x4.5 props attached, a set of four of these motors will produce 10 pounds of static thrust for blistering acceleration and incredible top end speeds.

    The Cobra CM-2206 series motors have a 3.0mm motor shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Since these motors are typically soldered directly to the speed controller to save weight, the 2206 motors come without bullet connectors and feature extended pre-tinned motor leads that are 10 inches (254mm) long. These motors also have 3mm threaded holes in a 16x19mm pattern on the back plate for easy installation on your model.

    The CM-2206 series motors feature an integrated 5mm threaded motor shaft which eliminates the chance of having a prop adapter spin off in flight. The included prop washer and nylon insert prop nut provides a solid attachment for your propellers that will not loosen up and slip during use.

    Included with every Cobra CM-2206 Series Motor is a complete accessory package which contains the following items:

    • Four M3x5mm Motor Mount Screws
    • Four M3 Flat Washers
    • Machined Aluminum Prop Washer
    • Locking Prop Nut with Nylon Insert

    Cobra CM-2206/20 Motor Specifications

    •  Stator Diameter     22.0 mm (0.866 in)
    •  Stator Thickness     6.0 mm (0.236 in)
    •  Number of Stator Slots     12
    •  Number of Magnet Poles     14
    •  Motor Wind     20 Turn Delta
    •  Motor Kv Value     2100 RPM per Volt
    •  No Load Current (Io)     0.85 Amps @ 10 Volts
    •  Motor Resistance (Rm) per Phase     0.098 Ohms
    •  Motor Resistance (Rm) Phase to Phase     0.065 Ohms
    •  Maximum Continuous Current     25 Amps
    •  Max Continuous Power (3-cell Li-Po)     280 Watts
    •  Max Continuous Power (4-cell Li-Po)     370 Watts
    •  Motor Weight     36.5 grams (1.29 oz.)
    •  Outside Diameter     27.0 mm (1.063 in.)
    •  Motor Shaft Diameter     3.00 mm (0.118 in.)
    •  Prop Shaft Diameter     5.00 mm (0.197 in.)
    •  Motor Body Length     16.5 mm (0.650 in.)
    •  Overall Shaft Length     35.3 mm (1.390 in.)
    •  Motor Timing     5-10 degrees
    •  PWM Frequency     8-20 KHz
    SKU: CM2206-2100
    €19.90
    inc. VAT

     IN STOCK
  • Cobra CM-2213/18 Multirotor Motor, Kv=1350

    Cobra CM-2213/18 Multirotor Motor, Kv=1350

    Cobra CM-2213/18 Multirotor Motor, Kv=1350

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance. All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 2213 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life. The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses. Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    To complete the package, a complete hardware accessory kit is included with every Cobra Motor. Included in this hardware kit are the following items:

    • Heavy Duty 3mm Thick Cross Style Motor Mount
    • Four M3x6mm Motor Mount Screws
    • Bolt-On style threaded prop adapter with 3 screws
    • Retaining Collar with Set Screw
    • Three female 3.5mm bullet connectors
    • Three pieces of heat-shrink tubing

    Specifications:

    • Stator Diameter     22.0 mm (0.866 in)
    • Stator Thickness     13 mm (0.512 in)
    • Number of Stator Slots     12
    • Number of Magnet Poles     14
    • Motor Wind     18 Turn Delta
    • Motor Kv Value     1350 RPM per Volt
    • No Load Current (Io)     0.68 Amps @ 8 Volts
    • Motor Resistance (Rm) per Phase     0.102 Ohms
    • Motor Resistance (Rm) Phase to Phase     0.068 Ohms
    • Maximum Continuous Current     20 Amps
    • Max Continuous Power (3-cell Li-Po)     220 Watts
    • Motor Weight     61.0 grams (2.15 oz.)
    • Outside Diameter     27.7 mm (1.091 in.)
    • Shaft Diameter     3.17 mm (0.125 in.)
    • Motor Body Length     28.0 mm (1.102 in.)
    • Overall Shaft Length     42.0 mm (1.654 in.)
    • Motor Timing     5-10 degrees
    • PWM Frequency     8kHz

     

    SKU: CM2213-1350
    €26.00
    inc. VAT

     IN STOCK
  • Cobra CM-2213/26 Multirotor Motor, Kv=950

    Cobra CM-2213/26 Multirotor Motor, Kv=950

    Cobra CM-2213/26 Multirotor Motor, Kv=950

    Cobra Brushless Motors offer performance and value for Sport Flyers and Competition pilots alike. They are built from high quality components, and are designed to give years of top-level performance.
    All Cobra Motors are shipped in a custom designed package that features protective foam on all six sides of the box, with 3 separate compartments to protect the motor, accessory pack and cross mount.

    The Cobra 2213 series motors have a 1/8 inch (3.17mm) shaft for extra strength, as well as oversize ball bearings to support the shaft and provide a long life.
    The stators are made with 0.20mm laminations for maximum efficiency and minimum Eddy Current losses.
    Also included on the motor are ultra-flexible motor leads with high-temp silicone rubber insulation and 3.5mm bullet connectors already installed.

    Included with every Cobra 2213 Series Motor is a complete accessory package which contains the following items:

    • Heavy Duty 3mm Thick Cross Style Motor Mount
    • Four M3x6mm Motor Mount Screws
    • Bolt-On style theaded prop adapter with 3 screws
    • Retaining Collar with Set Screw
    • Three female 3.5mm bullet connectors
    • Three pieces of heat-shrink tubing

    Specifications:

    • Stator Diameter     22.0 mm (0.866 in)
    • Stator Thickness     13 mm (0.512 in)
    • Number of Stator Slots     12
    • Number of Magnet Poles     14
    • Motor Wind     26 Turn Delta
    • Motor Kv Value     950 RPM per Volt
    • No Load Current (Io)     0.45 Amps @ 8 Volts
    • Motor Resistance (Rm) per Phase     0.201 Ohms
    • Motor Resistance (Rm) Phase to Phase     0.134 Ohms
    • Maximum Continuous Current     14 Amps
    • Max Continuous Power (3-cell Li-Po)     150 Watts
    • Motor Weight     61.0 grams (2.15 oz.)
    • Outside Diameter     27.7 mm (1.091 in.)
    • Shaft Diameter     3.17 mm (0.125 in.)
    • Motor Body Length     28.0 mm (1.102 in.)
    • Overall Shaft Length     42.0 mm (1.654 in.)
    • Motor Timing     5-10 degrees
    • PWM Frequency     8kHz
    SKU: CM2213-950
    €26.00
    inc. VAT

     IN STOCK
  • EMAX MT2206 1900KV BRUSHLESS MOTOR

    EMAX MT2206 1900KV BRUSHLESS MOTOR

    Emax MT2206 - 1900kv  Brushless Motor for FPV Mini Quadcopter Drone Racers. These motors are perfect when you want more power and thrust over the 1800 or 2204 size motors. These work best with 6x4 Props running a 3s set up , but if your escs can handle it then run on 4s for a whole new level of speed and agility.

    Come with accesory pack and mounting bolts .

    Availiable in CW or CCW version

    Specifications:

    • Motor: 2206-1900
    • Max Thrust : 460 gr
    • Voltage support :2-3S
    • Motor structure : 12N14P
    • Recommended propellers: 6-8"
    • Shaft : 3mm
    • Motor Diameter : 27.9mm
    • Weight : 32gr

     

    SKU: MT2206-1900cw
    €18.00
    inc. VAT

     IN STOCK
  • EMAX RS Special Edition RS2306

    EMAX RS Special Edition RS2306

    Details The EMAX 2306 series of motors offer some of the highest levels of quality and performance in a motor to-date. Boasting incredible thrust numbers, with a perfect blend of efficiency, showcases how EMAX is a leader within the FPV community and delivering products that continuously challenge the market with bold new designs. The Limited Edition White motors are only produced in a small batch with the initial product release.

    Introducing the newly improved version of the original Red Bottom Emax high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

    FEATURES:

    • 1.4Kg+ thrust with 4s battery and recommend propeller combo
    • Motor Type: Out-Runner
    • Motor Usage: Multirotor
    • Shaft Thread: No

    SPECs:

    • Model: RS2306
    • Thread: CW only
    • KV: 2400kv
    • Weight: 33.84g
    • Shaft Diameter: 3mm
    • Configuration: 12N14P
    • Motor Diameter: 28.3mm
    • Motor Height: 30.1mm
    • Prop Adapter Shaft Thread: M5
    • Input voltage: 3S-4S (12.6 16.8v)

    INCLUDED:

    • 1pc Motor
    • 1pc Locking Prop Nut
    • Mounting Screws
    • Allen Key
    SKU: EMAX-RS2306
    €24.00
    inc. VAT

  • EMAX RS2205 RaceSpec Motor SET of 4 motors, 2300kv, 3-4S

    EMAX RS2205 RaceSpec Motor SET of 4 motors, 2300kv, 3-4S

    Emax RS2205 Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

    Cooling:
    The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This “cool” feature allows the RS2205 to not only have a longer lasting motor, but also harness the power of N52 magnets.

    N52 Magnets:
    Uses the highest grade magnets. Better acceleration, stopping power, and sustained RPMs during high kv.

    Bearings:
    Genuine Japanese NMB Bearings provide long lasting, smooth performance.

    Key Features:

    • Thrust:Produces over +1,000g of thrust using 4S and 5x4.5 to 6.4.5 prop
    • Cooling Series Bell Design reduces motor temperature by at least 30%
    • Highest Grade N52 Neodymium magnets
    • Genuine Japanese NMB Bearings
    • Each Motor is Dynamically Balanced in the factory.
    • 15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
    • 3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
    • Windings made from  hight temp copper wire

    Specifications:

    • Model: RS2205
    • KV: 2300kv
    • Weight: Approx. 30g with wires
    • Wire AWG: 20AWG
    • Stator Diameter: 22mm
    • Stator Height: 5mm
    • Configuration: 12N14P
    • Motor Diameter: 27.9mm
    • Motor Height: 31.7mm
    • Prop Adapter Shaft Thread: M5
    • Input voltage: 3S-4S (12.6 - 16.8v)

    Scope of delivery- 4 motors in set, 2cw+2ccw

     

    SKU: EMX-RS2205-2300KV
    €89.90
    inc. VAT

  • EMAX RS2205 RaceSpec Motor SET of 4 motors, 2600kv, 3-4S

    EMAX RS2205 RaceSpec Motor SET of 4 motors, 2600kv, 3-4S

    Emax RS2205 Race Spec family of high performance brushless motors for multirotor FPV racing. Redesigned and engineered to perform better than most in it’s class, every motor is precision crafted within tight tolerances. Paired with performance driven props from any leading manufacturer will result in unreal thrust.

    Cooling:
    The unique fins machined into the bell draw up cool air from the motor base and through the coils as the motor spools up. The faster it spins, the more air it ventilates. Cooling fins significantly reduce heat soak by at least 30%. This “cool” feature allows the RS2205 to not only have a longer lasting motor, but also harness the power of N52 magnets.

    N52 Magnets:
    Uses the highest grade magnets. Better acceleration, stopping power, and sustained RPMs during high kv.

    Bearings:
    Genuine Japanese NMB Bearings provide long lasting, smooth performance.

    Key Features:

    • Thrust:Produces over +1,000g of thrust using 4S and 5x4.5 prop
    • Cooling Series Bell Design reduces motor temperature by at least 30%
    • Highest Grade N52 Neodymium magnets
    • Genuine Japanese NMB Bearings
    • Each Motor is Dynamically Balanced in the factory.
    • 15mm Extended Prop Shaft allows virtually any prop with 5mm hole.
    • 3 Lock nuts and 2 sets of motor screws for 3mm and 4mm thick frames.
    • Windings made from  hight temp copper wire

    Specifications:

    • Model: RS2205
    • KV: 2600kv
    • Weight: Approx. 30g with wires
    • Wire AWG: 20AWG
    • Stator Diameter: 22mm
    • Stator Height: 5mm
    • Configuration: 12N14P
    • Motor Diameter: 27.9mm
    • Motor Height: 31.7mm
    • Prop Adapter Shaft Thread: M5
    • Input voltage: 3S-4S (12.6 - 16.8v)

    Scope of delivery- 4 motors in set, 2cw+2ccw

     

    SKU: EMX-RS2205-2600KV
    €89.90
    inc. VAT

     LOW STOCK
  • eTURBINE Motor TB2204 CCW for TB250 racer

    eTURBINE Motor TB2204 CCW for TB250 racer

    eTURBINE Motor TB2204 CCW for TB250 racer

    1 Motor included.

    SKU: TB-250-MR1
    €15.90
    inc. VAT

     IN STOCK
  • eTURBINE Motor TB2204 CCW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CCW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CCW for TB250 racer, this is more Flat version of the motor. Certain batches delivered with those motors.

    1 Motor included.CCW version

    SKU: TB-250-MR2
    €16.90
    inc. VAT

     IN STOCK
  • eTURBINE Motor TB2204 CW for TB250 racer

    eTURBINE Motor TB2204 CW for TB250 racer

    eTURBINE Motor TB2204 CW for TB250 racer

    1 Motor included.

    SKU: TB-250-ML1
    €15.90
    inc. VAT

     IN STOCK
  • eTURBINE Motor TB2204 CW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CW for TB250 racer- Flat version

    eTURBINE Motor TB2204 CW for TB250 racer, this is more Flat version of the motor. Certain batches delivered with those motors.

    1 Motor included.CW version

    SKU: TB-250-ML2
    €16.90
    inc. VAT

     IN STOCK

Manufacturers

Back