Misc Heli Kits

Misc Heli Kits

 Different Kits of helicopters

Products


  • DYNA-X Conversion kit

    DYNA-X Conversion kit

    Dyna-X was designed around RobbeMillenium mechanics. Designed, Produced in Germany. made from proper Aluminium 6061

    Main idea is to combine Genuine Robbe mechanics, with improved 2 pieces frames (Same idea as the Futura SE). In frame Specially designed Aluminum X- components, which together create a extremely strong and lightweight structure and very light Helicopter.

    Rigid and Lightweight engine mount with Central support unit, Aluminum servo rockers and Landing gear plates are just a few of the advantages of Dyna-X. This helicopter designed for both F3D and FAI . Built around 90 size engine, without further  need of upgrading or changing components.

    All components are designed with an emphasis on function and durability, not on economic production. This machine is very smooth, light and the strongest on the market.

    Since Dyna-X was designed to work with Robbe mechanics, it will accept most of Robbe upgrades.

    Specifications:

    • Main rotor diameter: 1490-1530 mm
    • Tail rotor diameter: 300 mm
    • All-up weight: 4300 g
    • Height: 450 mm
    • Motor size: 15.00 cm3 or electric
    • Swashplate : Robbe System 88

    Contains

    • 1- Carbon Frames + Ground plate
    • 2- All CNC Metal in-frames components
    • 3- Fuel tank-Specially made for Dyna-X
    • 4- Hardened 15T pinion
    • 5- 2.5mm Titanium Pushrods for pitch Push pull
    • 6- Servo Tray and Swash guide Adaptor.
    • 7- All Necessary Hardware+Bearings
    SKU: RCHK-033
    €439.00 €605.00
    inc. VAT

     LOW STOCK
  • Dyna-X Deluxe Conversion

    Dyna-X Deluxe Conversion

    This is a package deal for Dyna-X Deluxe Conversion.

    • Main rotor diameter: 1490-1530 mm
    • Tail rotor diameter: 300 mm
    • All-up weight: 4300 g
    • Height: 450 mm
    • Motor size: 15.00 cm3
    • Mixing : Mechanical


    Contains (STD kit)

    • 1- Carbon Frames+Ground plate
    • 2- All CNC Metal in-frames components
    • 3- Fuel tank-Specially designed for Dyna-X
    • 4- Hardened 15T pinion
    • 5- 2.5mm Titanium Pushrods for Pitch Push pull
    • 6- Carbon/Metal Radio Tray and Swash plate holder adaptor.
    • 7- Necessary Hardware & Ball Bearings

    Deluxe Kit include also:

    • 1-Carbon/metal CNC radio tray.
    • 2-Carbon Boom supports 8mm
    • 3-V2Dyna-X fiberglass Canopy
    • 4-CNC Tail Gearbox ( complete with the double arm)
    • 5-Metal Bell Mixers
    • 6-Dyna-X carbon fins

    See the Dyna-x video

    SKU: SKU8121
    €650.00 €990.00
    inc. VAT

     LOW STOCK
  • OMPHOBBY M2  Dual-brushless Motor RC Helicopter 3D Helicopter-BNF RC Helicopter (Miami Blue)

    OMPHOBBY M2 Dual-brushless Motor RC Helicopter 3D Helicopter-BNF RC Helicopter (Miami Blue)

    OMPHOBBY M2 Remote Control Helicopter Dual-brushless Motor RC Helicopter 3D Helicopter-BNF RC Helicopter (Miami Blue)
     
    • The main rotor adopts the brushless motor for direct drive, which perfectly controls the running accuracy and the direct smooth driving feel. It reduces the resistance and noise of gear transmission, especially in flight routes and soft 3D flight, and basically can only hear the sound of propeller cutting wind..
    • The brushless motor is manufactured by SUNNYSKY with high precision, the motor shaft and the shaft of the rotor head are integrated. Besides, the spindle can be disassembled by removing the three screws, and the installation does not affect the dynamic balance. The hand wound coils and the high-performance magnets provide continuous power to M2. After consecutive violent flight with ten batteries, the motor temperature does not exceed 50 degrees, and it can safely fly violently..
    • Independent R&D integrated OFS flight control system. Gyro, flight control, ESC, and receiver 4 in 1 controller, combined with low-vibration airframe, which makes M2 with precise lock tail and excellent control feeling. The flight control has three built-in flight modes: attitude stabilization / soft 3D / violent 3D, which is suitable for indoor flexible flight and outdoor violent flight. In addition to its own communication protocol, it is also compatible with the receiver interfaces of S.BUS a.
    • The helicopter adopts the precise high-speed all-metal servo, carbon fiber frame, with precision rotor head and swashplate component, which can be controlled accurately and be very durable..
    • The structural parts are made of aluminum alloy CNC, which is of high precision and exquisite workmanship, and with the carbon fiber components make the M2 a precise and strong body. The fiberglass painted canopy features concise and novel design, excellent workmanship, and three colors for option. The motor, landing skid and vertical stabilizer are in the same color, which highlights the distinctive style of M2, as a static model is also cool..

    Specification:

    • Channels: 6CH
    • Body Length: 410mm
    • Body Height: 130mm
    • Body Width: 65mm
    • Main Rotor Diameter: 400mm
    • Tail Rotor Diameter: 71mm
    • Main Rotor: SUNNYSKY R40-3
    • Tail Motor: SUNNYSKY R11-3
    • Battery: 11.1V 3S 650mAh 45C Lipo Battery
    • Servo: 10g 5V 0.08Sec/60 1.65kg.cm Digital Servo
    • Flight Control: OFS 4 IN 1 (dual brushless ESC, fly control,compatible with SFHSS.
    • Flying Time: About 8mins(3.5min for 3D flying)

    Package Included:

    1* OMPHOBBY M2 RC Helicopter
    1* Battery

    SKU: OMP-M2BNFMB
    €369.00
    inc. VAT

     72HR STOCK
    NEW

Manufacturers

Back