Mikado Logo

Mikado Logo

 Mikado helicopters are made in Germany, top quality models, silent mechanics, virtually non wearing parts.

Products


  • LOGO 400 SE with VBar Head, HKII 4015-1070, EDGE

    LOGO 400 SE with VBar Head, HKII 4015-1070, EDGE

    LOGO 400SE kit with VBar head
     

    Specifications

    • Rotor diameter 1140 mm
    • Rotor blades 473 mm
    • RTF weight ca. 2000 g
    • recommended batteries 5S up to 6S LiPo
    • Main gear ratio 1,7:7 -1:15,3
    • Main Gear size 200 teeth (mod. 0,5)
    • battery slot 49,0 x 48,0 x 200,0 mm (HxWxL)

    Kit Content
     

    • Kit with VBar Rotor Head
    • Detailed printed manual
    • MotoR Scorpion HK 4015-1070Kv custom made
    • Motor pinion22, Modul 05
    • ESC ---
    • Servos ---
    • VBar electronic Mini VBar "Blueline" 5.0 Express
    • Blades Rotor blades EDGE FBL 473mm
    • Tail Blades 72mm EDGE
    • Canopy Airbrushed Canopy
    SKU: MIK-2232
    €679.00
    inc. VAT

  • Mikado Helicopters Logo 550 SE Flybarless helicopter Kit

    Mikado Helicopters Logo 550 SE Flybarless helicopter Kit

    LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
    Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

    Main Highlights:

    • Accepting up to 660 mm main blades
    • 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
    • Light und durable chassis fiberglass reinforced frame with battery quick release system
    • Direct servo link to the swashplate
    • Hollow main shaft with 10mm diameter
    • Herringbone main gear with 153 teeth (module 0.7)
    • Motor counterbearing with additional main shaft support
    • Colored fin set in neon red, matched with the canopy
    • Extra-strong 22 mm diameter tail boom
    • Detailed airbrush canopy in neon yellow

    Specifications Helicopter

    • Rotor diameter:1340 mm
    • Rotor blades:600 mm
    • RTF weight :3,20 kg
    • Battery :6S Lipo 5,000 mAh
    • Main gear ratio :8.1-12.75
    • Main Gear size:153 teeth modul 07
    • Battery Slot:60 x 54 x 600 mm
    • Length:1140 mm
    • Hight:360 mm
    • Width:210 mm

    Content

    • Kit Combo with blades
    • Counterbearing with mainshaft support
    • Detailed printed manual
    • Blades  Carbon 610 mm
    • Tail Blades Carbon 95 mm
    • Airbrush painted canopy
    SKU: MIK-02102
    €499.00
    inc. VAT

     72HR STOCK
  • Mikado Helicopters Logo 550 SE Scorpion Combo Flybarless Helicopter

    Mikado Helicopters Logo 550 SE Scorpion Combo Flybarless Helicopter

    LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
    Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

    Main Highlights:

    • Accepting up to 660 mm main blades
    • 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
    • Light und durable chassis fiberglass reinforced frame with battery quick release system
    • Direct servo link to the swashplate
    • Hollow main shaft with 10mm diameter
    • Herringbone main gear with 153 teeth (module 0.7)
    • Motor counterbearing with additional main shaft support
    • Colored fin set in neon red, matched with the canopy
    • Extra-strong 22 mm diameter tail boom
    • Detailed airbrush canopy in neon yellow

    Specifications Helicopter

    • Rotor diameter:1340 mm
    • Rotor blades:600 mm
    • RTF weight :3,20 kg
    • Battery :6S Lipo 5,000 mAh
    • Main gear ratio :8.1-12.75
    • Main Gear size:153 teeth modul 07
    • Battery Slot:60 x 54 x 600 mm
    • Length:1140 mm
    • Hight:360 mm
    • Width:210 mm

    Content

    • Kit Combo with blades
    • Counterbearing with mainshaft support
    • Scorpion HK III 4025-1100 kV, Mikado Edition
    • Motor pinion :13 teeth modul 07
    • Detailed printed manual
    • Blades  Carbon 610 mm
    • Tail Blades Carbon 95 mm
    • Airbrush painted canopy
    SKU: MIK-02101
    €699.00
    inc. VAT

     72HR STOCK
  • Mikado Helicopters Logo 550 SE V2 super combo

    Mikado Helicopters Logo 550 SE V2 super combo

    LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
    Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

    Main Highlights:

    • Accepting up to 660 mm main blades
    • 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
    • Light und durable chassis fiberglass reinforced frame with battery quick release system
    • Direct servo link to the swashplate
    • Hollow main shaft with 10mm diameter
    • Herringbone main gear with 153 teeth (module 0.7)
    • Motor counterbearing with additional main shaft support
    • Colored fin set in neon red, matched with the canopy
    • Extra-strong 22 mm diameter tail boom
    • Detailed airbrush canopy in neon yellow

    Specifications Helicopter

    • Rotor diameter:1340 mm
    • Rotor blades:600 mm
    • RTF weight :3,20 kg
    • Battery :6S Lipo 5,000 mAh
    • Main gear ratio :8.1-12.75
    • Main Gear size:153 teeth modul 07
    • Battery Slot:60 x 54 x 600 mm
    • Length:1140 mm
    • Hight:360 mm
    • Width:210 mm

    Content

    Kit Combo with motor and blades
    Counterbearing with mainshaft support
    Detailed printed manual
    Scorpion HK III 4025-1100 kV, Mikado Edition with 25/30 mm motor mounting
    13 teeth modul 07
    VStabi NEO Expres VLink
    Servos 3 x Savox 1257, 1 x Savox 1290
    Blades CFK 610 mm
    Tail Blade CFK 95 mm
    Canopy Airbrush
    SKU: MIK-05331
    €999.00
    inc. VAT

     72HR STOCK
  • Mikado Helicopters Logo 550 SX super combo

    Mikado Helicopters Logo 550 SX super combo

    LOGO 550 SX is the next step in the LOGO 500 Series. The LOGO 550 SX keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
    Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SX and 550 SX size LOGO helicopters.

    Main Highlights:

    • Accepting up to 660 mm main blades
    • 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
    • Light und durable chassis fiberglass reinforced frame with battery quick release system
    • Direct servo link to the swashplate
    • Hollow main shaft with 10mm diameter
    • Herringbone main gear with 153 teeth (module 0.7)
    • Motor counterbearing with additional main shaft support
    • Colored fin set in neon red, matched with the canopy
    • Extra-strong 22 mm diameter tail boom
    • Detailed airbrush canopy in neon yellow

    Specifications Helicopter

    • Rotor diameter:1340 mm
    • Rotor blades:600 mm
    • RTF weight :3,20 kg
    • Battery :6S Lipo 5,000 mAh
    • Main gear ratio :8.1-12.75
    • Main Gear size:153 teeth modul 07
    • Battery Slot:60 x 54 x 600 mm
    • Length:1140 mm
    • Hight:360 mm
    • Width:210 mm

    Content

    Kit Combo with motor and blades
    Counterbearing with mainshaft support
    Detailed printed manual
    Scorpion HK III 4025-1100 kV, Mikado Edition with 5mm shaft
    14 teeth modul 07
    VStabi NEO Expres VLink
    Servos 3 x Savox 1257, 1 x Savox 1290
    Blades VTX 557mm
    Tail Blade CFK 92 mm
    Canopy Airbrush
    SKU: MIK-05330
    €999.00
    inc. VAT

     72HR STOCK
  • Mikado Helicopters Logo 600 SE V3 Flybarless Helicopter Kit

    Mikado Helicopters Logo 600 SE V3 Flybarless Helicopter Kit

    The LOGO 600 SE is a special version of the LOGO 600 series with a longer tail boom. This allows using longer main rotor blades of about 690 mm in length.
    With the considerably larger rotor disc and nearly the same all-in-weight, the LOGO 600 SE is a very lightweight heli in the 690 class.
    The revised version has the counterbearing linked to the main rotor shaft and the one-piece head yoke oft he 600 SX series as well as a freshly designed canopy.
    Below the canopy, you find the battery quick release system and considerably more headroom for flight packs below the counter bearing.

    Highlights

    • Very high flight performance for low RPM and 3D flying
    • 690 mm rotorblades
    • 10S Lipo (4,000-5,000mAh), 12S Lipo (max. 4,000 mAh)
    • new one-piece metal rotorhead yoke with 8mm spindle shaft and extra-large thrust bearings
    • light und durable fiberglass reinforced frame with battery quick release system
    • hollow 10 mm main shaft
    • new and stronger modul 1 herringbone main gear
    • new counter bearing with main shaft support
    • new fin set in neon-yellow color
    • 25 mm tail boom
    • Airbrush canopy

    Specifications Helicopter

    • Rotor diameter:1550 mm
    • Rotor blades:up to 693 mm
    • RTF weight: 4,0 kg
    • Battery:10S LiPo (4,500 mAh) or 12S Lipo (max. 4,000mAh)
    • Main gear ratio:7.1 - 10.6
    • Main Gear size:106 teeth modul 1
    • Battery slot:60 x 54 x 300 mm (HxBxL)
    • Kit Length:1310 mm
    • Kit Hight:360 mm
    • Kit Width:210 mm

    Content

    • Kit with VBar Rotor Head
    • Motor counterbearing with mainshaft support
    • Detailed printed manual
    • Blades CFK 690 mm
    • Tail Blades CFK 105 mm
    • Airbrushed Canopy
    SKU: MIK-02105
    €599.00
    inc. VAT

     72HR STOCK
  • Mikado Helicopters Logo 600 SE V3 Scorpion 450KV

    Mikado Helicopters Logo 600 SE V3 Scorpion 450KV

    The LOGO 600 SE is a special version of the LOGO 600 series with a longer tail boom. This allows using longer main rotor blades of about 690 mm in length. With the considerably larger rotor disc and nearly the same all-in-weight, the LOGO 600 SE is a very lightweight heli in the 690 class. The revised version has the counterbearing linked to the main rotor shaft and the one-piece head yoke oft he 600 SX series as well as a freshly designed canopy. Below the canopy, you find the battery quick release system and considerably more headroom for flight packs below the counter bearing.

     

    • Very high flight performance for low RPM and 3D flying
    • 690 mm rotorblades
    • 10S Lipo (4,000-5,000mAh), 12S Lipo (max. 4,000 mAh)
    • new one-piece metal rotorhead yoke with 8mm spindle shaft and extra-large thrust bearings
    • light und durable fiberglass reinforced frame with battery quick release system
    • hollow 10 mm main shaft
    • new and stronger modul 1 herringbone main gear
    • new counter bearing with main shaft support
    • new fin set in neon-yellow color
    • 25 mm tail boom
    • Airbrush canopy

    Specifications Helicopter:

    • Rotor diameter     1550 mm
    • Rotor blades     693 mm
    • RTF weight     ca. 4,0 kg
    • recommended batterie     12S Lipo (max. 4,000mAh)
    • Main gear ratio     7.1 - 10.6
    • Main Gear size     106 teeth modul 1
    • batterie slot     60 x 54 x 300 mm (HxBxL)
    • Length     1310 mm
    • Hight     360 mm
    • Width     210 mm

    Content:

    • Kit     Kit with VBar Rotor Head
    • Accessories     Motor counterbearing with mainshaft support
    • Manual     detailed printed manual
    • Motors     Scorpion HKII 4035-450
    • Motor pinion     11 teeth
    • Blades     CFK 690 mm
    • Tail Blades     CFK 105 mm
    • Canopy     Airbrushed Canopy
    SKU: MIK-02107
    €799.00
    inc. VAT

     72HR STOCK
  • Mikado Logo 200 V-bar Bind-and-Fly ARTF Assembled Electric Helicopter

    Mikado Logo 200 V-bar Bind-and-Fly ARTF Assembled Electric Helicopter

    The Logo 200 from Mikado Helicopters is a unique spin on the latest demand for BNF Micro helicopters. Paired with a VBar Mini Neo gyro system, users with VBar Control radio systems will be greeted with a Bind-N-Fly package that flies like a larger helicopter thanks to some special software implementation with the Vbar Mini Neo release.

    The LOGO 200 does not support other radio systems than VBar Control. Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.  

    •     BNF-RTF Micro Helicopter for VBar Control radio (bind and fly, ready to fly)
    •     Exceptional flight performance, comparable to larger 600-700 class helis
    •     Equally suitable for sports flying, aerobatics and 3D flying
    •     Wide range of head speeds, from 2,500-7000+ 1/min possible
    •     Lipo 3S-650 mAh battery for flight times from 4-9 min. (included)
    •     Dual Motor System, direct drive for main and tail rotor
    •     Dual ESC with metal case
    •     VBar NEO mini 6.4 Flybarless System with 'Anti Gravity'
    •     VBar NEO already set up, no setup on your own required, just bind and fly
    •     VBar NEO Governor with RPM telemetry
    •     Micro digital servos with metal gears for the swashplate
    •     Carbon frame and landing gear
    •     Aluminum rotor head and swashplate
    •     VTX main rotor blades
    •     Glass Fiber Airbrush canopy

    At your own discretion, you can use VBar Control to select a digital third party protocol as an input, and make the necessary channel adjustments.
    You then obviously also need a suitable separate third party receiver.
    Adjustments to the flight parameters can only be made with VBar Control. VBar NEO mini can not be set up via computer software.
    If set up properly, you can then fly the model with VBar's motor switch logic, three parameter banks, and use Rescue and/or Beginner mode (if installed).

    SKU: MIK-05384
    €599.00
    inc. VAT

     72HR STOCK
    NEW
  • Mikado LOGO 400 VBar

    Mikado LOGO 400 VBar

    This is the Logo 400 V-Bar kit with the MIK4357 Mini V-Bar Blueline Express Electronics

    Extremely rigid frame design

    • 3D fins set
    • Light-weight, reliable tail belt drive
    • Hollow 10 mm main rotor shaft
    • Very light 8 mm head spindle
    • Carbon tail boom support
    • CNC Aluminum Swash plate
    • CNC Aluminum motor Mount
    • Thrusted tail

    Specifications:

    • Rotor diameter 1040 mm
    • Rotor blades 425-450 mm
    • RTF weight ca. 1800 g
    • recommended battery 4S up to 6S LiPo
    • Main gear ratio 1,7:7 -1:15,3
    • Main Gear size 200 teeth (mod. 0,5)
    • battery slot 49,0 x 48,0 x 200,0 mm (HxWxL)


    Kit Content

    • Kit with VBar Rotor Head
    • Accessories ---
    • Detailed printed manual
    • Motors ---
    • Motor pinion ---
    • ESC ---
    • Servos ---
    • VBar electronic Mini VBar "Blueline" 5.0 Express
    • Rotor blades Carbon 425mm
    • Tail Blades 75 mm plastic
    • Airbrushed Canopy
    SKU: MIK-2263
    €599.00
    inc. VAT

  • Mikado LOGO 480 XXtreme Helicopter Kit with Blades Neon-Red/Yellow

    Mikado LOGO 480 XXtreme Helicopter Kit with Blades Neon-Red/Yellow

    Mikado LOGO 480 XXtreme Helicopter Kit with Blades neon-red/yellow

    Specifications Helicopter

    • Rotor diameter    1090 mm
    • Rotor blades    EDGE 473
    • RTF weight    > 2200 g
    • recommended battery   Lipo max. 4000 mAh
    • Main gear ratio    11,7 - 9,6
    • Main Gear size    212 teeth, modul 0,5, herringbone main gear
    • Battery slot    H 53,5 x W 49,0 x L 150,0 mm
    • Length    970 mm
    • Hight    340 mm
    • Width    117 mm

    Kit Content

    • Kit
    • Accessories    -
    • Detailed printed manual
    • ESC    -
    • Servos    -
    • VBar electronic    -
    • Blades    EDGE 473 FBL
    • Tail Blades    EDGE 72
    • Airbrush canopy : Neon yellow/red
    SKU: MIK-2207
    €529.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 480 XXtreme Scorpion Motor Combo, Blades, Yellow/Red

    Mikado LOGO 480 XXtreme Scorpion Motor Combo, Blades, Yellow/Red

    Mikado LOGO 480 XXtreme Scorpion motor combo, Blades, yellow/red

    Specifications Helicopter

    • Rotor diameter 1090 mm
    • Rotor blades EDGE 473
    • RTF weight > 2200 g
    • recommended battery Lipo  4000 mAh
    • Main gear ratio  11,7 - 9,6
    • Main Gear size 212 teeth, modul 0,5, herringbone main gear
    • Battery slot    53.5x49x150 mm
    • Length    970 mm
    • Hight    340 mm
    • Width    117 mm

    Kit Content

    • Manual with pictures
    • Motors  Scorpion HK-II 4015-1070
    • Motor pinion 20 teeth, modul 0,5
    • Blades EDGE 473 FBL
    • Tail Blades EDGE 72
    • Canopy Airbrush canopy, neon-yellow/neon-red
    SKU: MIK-2209
    €589.00
    inc. VAT

     72HR STOCK
  • Mikado Logo 480 XXtreme Super Combo,YGE, Mini V-bar, Savox Servos, Scorpion Motor, Blades, Yellow/Red

    Mikado Logo 480 XXtreme Super Combo,YGE, Mini V-bar, Savox Servos, Scorpion Motor, Blades, Yellow/Red

    Mikado Logo 480 XXtreme Super Combo,YGE, Mini V-bar, Savox Servos, Scorpion motor, Blades, yellow/red

    Specifications Helicopter

    • Rotor diameter    1090 mm
    • Rotor blades    EDGE 473
    • RTF weight    > 2200 g
    • recommended battery    Lipo 4000 mAh
    • Main gear ratio    11,7 - 9,6
    • Main Gear size    212 teeth, modul 0,5, herringbone main gear
    • Batteryslot    H 53,5 x W 49,0 x L 150,0 mm
    • Length    970 mm
    • Hight    340 mm
    • Width    117 mm

    Kit Content

    • Kit
    • Accessories    -
    • Manual    detailed printed manual
    • Motors    Scorpion HK-II 4015-1070
    • Motor pinion    20 teeth, modul 0,5
    • ESC    YGE 90LV with power bec
    • Servos    Savox SH1250MG (3x), SH1290MG (1x)
    • VBar electronic    Mini VBar blueline express
    • Blades    EDGE 473 FBL
    • Tail Blades    EDGE 72
    • Canopy    Airbrush canopy, neon-yellow/neon-red
    SKU: MIK-2208
    €1049.00
    inc. VAT

     72HR STOCK
  • Mikado Logo 480 XXtreme Super Combo,YGE, VBar NEO VLink, Savox Servos, Scorpion motor, Blades, yellow/red

    Mikado Logo 480 XXtreme Super Combo,YGE, VBar NEO VLink, Savox Servos, Scorpion motor, Blades, yellow/red

    Mikado Logo 480 XXtreme Super Combo,YGE, VBar NEO VLink, Savox Servos, Scorpion motor, Blades, yellow/red

    Specifications:

    • Rotor diameter: 1090 mm
    • Rotor blades: Rotortech 480
    • RTF weight: > 2200 g
    • recommended batterie: Lipo battery max. 4000 mAh
    • Main gear ratio: 11,7 - 9,6
    • Main Gear size: 212 teeth, modul 0,5, herringbone main gear
    • batterie slot: H 53,5 x W 49,0 x L 150,0 mm
    • Length: 970 mm
    • Hight: 340 mm
    • Width: 117 mm

    Content Kit:

    • Kit
    • Accessories: -
    • Manual: detailed printed manual
    • Motors: Scorpion HK-II 4015-1070
    • Motor pinion: 22 or 23 teeth, modul 0,5
    • ESC: YGE 90LV with power bec
    • VBar electronic: VBar NEO express
    • Servos: Savox SH1250MG (3x), SH1290MG (1x)
    • Blades: Rotortech 480
    • Tail Blades: Carbon 72-86 mm
    • Canopy: Airbrush canopy, neon-yellow/neon-red
    SKU: MIK-2206
    €1049.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 550 SE VBar/YGE90/Scorpion Combo

    Mikado LOGO 550 SE VBar/YGE90/Scorpion Combo

    LOGO 550 SE is the next step in the LOGO 500 Series. The LOGO 550 SE keeps all the proven and popular components of the LOGO 500, while incorporating several new developments to sustain today’s technical requirements during extreme flight manoeuvers.
    Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500 SE and 550 SE size LOGO helicopters.

    Main Highlights:

    • Accepting up to 660 mm main blades
    • 6 S Lipo 4500-5000 mAh, a luminum rotor head yoke with 8mm spindle shaft
    • Light und durable chassis fiberglass reinforced frame with battery quick release system
    • Direct servo link to the swashplate
    • Hollow main shaft with 10mm diameter
    • Herringbone main gear with 153 teeth (module 0.7)
    • Motor counterbearing with additional main shaft support
    • Colored fin set in neon red, matched with the canopy
    • Extra-strong 22 mm diameter tail boom
    • Detailed airbrush canopy in neon yellow

    Specifications Helicopter

    • Rotor diameter:1340 mm
    • Rotor blades:600 mm
    • RTF weight :3,20 kg
    • Battery :6S Lipo 5,000 mAh
    • Main gear ratio :8.1-12.75
    • Main Gear size:153 teeth modul 07
    • Battery Slot:60 x 54 x 600 mm
    • Length:1140 mm
    • Hight:360 mm
    • Width:210 mm

    Content

    • Kit Combo with blades
    • Motor Scorpion HK III 4025-1100 kV, Mikado Edition
    • Motor pinion13 teeth modul 07
    • ESC YGE 90LV with power BEC
    • Mini VBar 5.3 Express
    • Counterbearing with mainshaft support
    • Detailed printed manual
    • Blades  Carbon 610 mm
    • Tail Blades Carbon 95 mm
    • Airbrush painted canopy
    SKU: MIK-02100
    €1049.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 550 SX Helicopter Kit

    Mikado LOGO 550 SX Helicopter Kit

    Mikado LOGO 550 SX Helicopter kit New Model

    The LOGO 550 SX is the first member of the next evolutionary step of our popular and proven LOGO 500/550/600 helicopter series.
    Underneath the freshly designed canopy you find an improved version of our tried and tested chassis, which now offers a battery quick release system and considerably more headroom for flight packs below the counter bearing. The chassis will of course be available as upgrade kits for all existing 500/550/600 size LOGO helicopters.
     

    • 550 mm main blades
    • 6S Lipo 4500-5000 mAh, aluminum rotor head yoke with 8mm spindle shaft
    • Light and durable chassis fiberglass reinforced frame with battery quick release system
    • Direct servo link to the swash plate
    • Hollow main shaft with 10mm diameter
    • Herringbone main gear with 153 teeth (module 0.7)
    • Motor counter bearing with additional main shaft support
    • Colored fin set in neon red, matched with the canopy
    • Extra-strong 22 mm diameter tail boom
    • Detailed airbrush canopy in neon red

    Specifications Helicopter:

    • Rotor diameter    1245 mm
    • Rotor blades    550mm
    • RTF weight    2950 g
    • recommended batterie    6S 5000 mAh LiPo
    • Main gear ratio    9,56 - 12,75
    • Main Gear size    153 teeth Modul 07
    • batterie slot    62 x 54 x 300 mm (HxWxL)
    • Length    1070 mm
    • Hight    360 mm
    • Width    210 mm

    Contents of the Kit( Included)

    • Kit with VBar Rotor Head
    • Motor counter bearing with main shaft support
    • Detailed printed manual
    • Motors    ---
    • Motor pinion    ---
    • ESC    ---
    • VBar electronic    ---
    • Servos    ---
    • Blades Carbon blades 550mm, Edge or rotortech
    • Tail Blades CFK 92mm
    SKU: MIK-2110
    €490.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 600 10S Helicopter Combo with Scorpion Motor

    Mikado LOGO 600 10S Helicopter Combo with Scorpion Motor

    The LOGO 600 combines the proven concept of the LOGO 600 SX with new components and our new signature canopy design:

    • 600-620 mm main blades
    • for 10S Lipo 5,000 mAh or 12S LiPo up to 3.500 mAh
    • light und durable chassis fiberglass reinforced frame with battery quick release system
    • direct servo link to the swashplate
    • hollow main shaft with 10 mm diameter
    • herringbone main gear with 106 teeth (module 1)
    • motor counterbearing with additional main shaft support
    • xtra-strong 25 mm diameter tail boom

    Now with:

    • aluminum rotor head with 8 mm spindle shaft and extra-large thrust bearings (ø 16 mm)
    • larger swash plate
    • aluminum pulley in the chassis
    • stronger one-way bearing
    • fin set with colored accents in neon red
    • newly designed signature airbrush canopy

     

    SKU: MIK-5095
    €859.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 690 SX V2 Kit

    Mikado LOGO 690 SX V2 Kit

    The new LOGO 690 SX V2 from Mikado is a cross-over model, combining the best of 600 and 700 size helicopters. This makes for extraordinary flight performance.

    •     LOGO 690 SX—a 700 size heli with a weight of just 4.8 kg (12S-5,000)
    •     light und durable chassis fiberglass reinforced frame with battery quick release system
    •     for 12S Lipo battery, 4,000 mAh to 5,000 mAh
    •     aluminum swashplate with new geometry for quicker cyclic response
    •     robust tail drive via HTD-belt with aluminum drive pulleys
    •     stronger blade grips with 5 mm blade grip bolt
    •     stronger free wheel for higher torque
    •     additional aluminum/carbon battery tray  
    •     reinforced clamp ring for main rotor shaft
    •     herringbone main gear makes for smooth sound
    •     extra-stiff carbon tail boom brace
    •     new airbrushed chassis cover lets you identify the flight attitude of the heli more easily
    •     glass-fiber airbrushed canopy with new look

    Specifications

    • Rotor diameter 1,550 mm
    • Rotor blades 690 mm
    • RTF weight 4.8 kg
    • Recommended battery 12S Lipo (4.000-5.000 mAh)
    • Main gear ratio    1:7.06
    • Tail gear ratio    1:4,76
    • Main Gear size    106 Module 1
    • batterie slot    58 x 55 x 330 mm
    • Length 1,340 mm
    • Hight 390 mm
    • Width 330 mm

    Content

    • Kit LOGO 690 SX V2
    • Anti Static Kit
    • Illustrated Manual
    • Blades Carbon 690 mm
    • Tail Blades Carbon 105 mm
    SKU: MIK-2146
    €689.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 690 SX-V2 Scorpion Motor Combo

    Mikado LOGO 690 SX-V2 Scorpion Motor Combo

    The new LOGO 690 SX from Mikado is a cross-over model, combining the best of 600 and 700 size helicopters. This makes for extraordinary flight performance.

    •     LOGO 690 SX—a 700 size heli with a weight of just 4.8 kg (12S-5,000)
    •     light und durable chassis fiberglass reinforced frame with battery quick release system
    •     for 12S Lipo battery, 4,000 mAh to 5,000 mAh
    •     aluminum swashplate with new geometry for quicker cyclic response
    •     robust tail drive via HTD-belt with aluminum drive pulleys
    •     stronger blade grips with 5 mm blade grip bolt
    •     stronger free wheel for higher torque
    •     additional aluminum/carbon battery tray  
    •     reinforced clamp ring for main rotor shaft
    •     herringbone main gear makes for smooth sound
    •     extra-stiff carbon tail boom brace
    •     new airbrushed chassis cover lets you identify the flight attitude of the heli more easily
    •     glass-fiber airbrushed canopy with new look

    Specifications Helicopter

    • Rotor diameter    1,550 mm
    • Rotor blades    690 mm
    • RTF weight    4.8 kg
    • recommended batterie    12S Lipo (4.000-5.000 mAh)
    • Main gear ratio    1:7.06
    • Tail gear ratio    1:4,76
    • Main Gear size    106 Module 1
    • batterie slot    58 x 55 x 330 mm
    • Length    1,340 mm
    • Hight    390 mm
    • Width    330 mm

    Content

    • Kit LOGO 690 SX
    • Anti Static Kit
    • Illustrated Manual
    • Motor Scorpion HK 4525-370 kV, Mikado Edition
    • Motor pinion 15 teeth
    • Blades Carbon 690 mm
    • Tail Blades Carbon 105 mm
    SKU: MIK-2147
    €879.00
    inc. VAT

     LOW STOCK
  • Mikado LOGO 700 VBar/Scorpion Motor Combo

    Mikado LOGO 700 VBar/Scorpion Motor Combo

    Systematically designed and put to the test, for tough competition flying. The ideal 700 size machine, for every pilot, for every style of flying.

    The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.

    It utilizes tried and tested mechanical components like

    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
    • Belt step-up gear to the tail gear box in the chassis.
    • Torque tube.
    • Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.

    To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft. you need 55mm shaft to be able to use Logo 700

    In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    Color accents to the tail fin also help with visibility.

    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.

    In the kit:

    • Motor: Scorpion 4525-520 Kv Ultimate with 6 x 55 mm motor shaft
    • Motor pinion:13 teeth pinion, modul 1 with 25° lead angle
    • VBar electronic: VBar NEO
    • Blades: Rotortech 690mm
    • Tail Blades: Carbon Tail Rotor Blades 105 mm
    • Canopy:Airbrush Glas Fiber Canopy
    SKU: MIK-2128
    €1479.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 700 VTX 697 Blades Combo

    Mikado LOGO 700 VTX 697 Blades Combo

    Systematically designed and put to the test, for tough competition flying. The ideal 700 size machine, for every pilot, for every style of flying.

    in this kit Blades  VTX 697 included

    The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.

    It utilizes tried and tested mechanical components like

    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
    • Belt step-up gear to the tail gear box in the chassis.
    • Torque tube.
    • Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.

    To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft. you need 55mm shaft to be able to use Logo 700

    In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    Color accents to the tail fin also help with visibility.

    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.

    Included

    • Logo 700 kit
    • Blades: VTX Carbon Rotor Blades 697 mm
    • Tail Blades: Carbon Tail Rotor Blades 105 mm
    • Canopy: Airbrush Glas Fiber Canopy
    SKU: MIK-2127
    €979.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 700 VTX 717 Blades Combo

    Mikado LOGO 700 VTX 717 Blades Combo

    Systematically designed and put to the test, for tough competition flying. The ideal 700 size machine, for every pilot, for every style of flying.

    In this kit Blades VTX 717 are included.

    The LOGO 700 is the worthy successor to the venerable LOGO 700 XXtreme.

    It utilizes tried and tested mechanical components like

    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise.
    • Belt step-up gear to the tail gear box in the chassis.
    • Torque tube.
    • Sturdy tail gear box now fully encapsulated, lighter, almost maintenance-free and protected against dust and dirt.

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    Recommended main rotor blade sizes are 690-717 mm, depending on your personal taste and style of flying.

    To power the 700, you can rely on reliable components from the LOGO 700 XXtreme, with 6 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft. you need 55mm shaft to be able to use Logo 700

    In the beginning, there will be two gear ratios available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4525-520 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 700 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 700 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    Color accents to the tail fin also help with visibility.

    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,300 g / 11.86 lb is possible.

    Included in the kit:

    • Logo 700 kit
    • Blades: VTX Carbon Rotor Blades 717 mm
    • Tail Blades :Carbon Tail Rotor Blades 105 mm
    • Canopy:Airbrush Glas Fiber Canopy
    SKU: LOGO700-MIK2126
    €999.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 800 Helicopter kit  blue/yellow Scorpion Motor Combo

    Mikado LOGO 800 Helicopter kit blue/yellow Scorpion Motor Combo

    The LOGO 800 is the worthy successor to the venerable LOGO 800 XXtreme.

    It utilizes the tried and tested mechanical components of the LOGO 700 including

    larger lower frame halves and beefed-up landing gear
    stronger pinned belt drive pulley on the main shaft  
    Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise
    Belt step-up gear to the tail gear box in the chassis
    Torque tube
    Sturdy aluminum open tail gear box

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.

    The benefits at a glance:

    Facilitates assembly, maintenance and repairs.
    The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics. It’s as robust as ever.

    Recommended main rotor blade sizes are 750-810 mm, depending on your personal taste and style of flying.

    To power the 80, you can rely on reliable components from the LOGO 800 XXtreme, with 6 mm x 50 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft.

    Two gear ratios are available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4535-380 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 800 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 800 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

     

    SKU: MIK-05445
    €1511.00
    inc. VAT

     72HR STOCK
    NEW
  • Mikado LOGO 800 Helicopter kit  neon-orange/blue

    Mikado LOGO 800 Helicopter kit neon-orange/blue

    The LOGO 800 is the worthy successor to the venerable LOGO 800 XXtreme.

    It utilizes the tried and tested mechanical components of the LOGO 700 including

    larger lower frame halves and beefed-up landing gear
    stronger pinned belt drive pulley on the main shaft  
    Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise
    Belt step-up gear to the tail gear box in the chassis
    Torque tube
    Sturdy aluminum open tail gear box

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.

    The benefits at a glance:

     Facilitates assembly, maintenance and repairs.
        The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
        The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
        The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
        The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
        In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
        Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
        The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
        The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    Recommended main rotor blade sizes are 750-810 mm, depending on your personal taste and style of flying.

    To power the 80, you can rely on reliable components from the LOGO 800 XXtreme, with 6 mm x 50 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft.

    Two gear ratios are available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4535-380 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 800 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 800 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    SKU: MIK-05446
    €1169.00
    inc. VAT

     72HR STOCK
    NEW
  • Mikado LOGO 800 Helicopter kit blue/yellow

    Mikado LOGO 800 Helicopter kit blue/yellow

    The LOGO 800 is the worthy successor to the venerable LOGO 800 XXtreme.

    It utilizes the tried and tested mechanical components of the LOGO 700 including

      larger lower frame halves and beefed-up landing gear
      stronger pinned belt drive pulley on the main shaft  
      Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise
      Belt step-up gear to the tail gear box in the chassis
      Torque tube
      Sturdy aluminum open tail gear box

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.

    The benefits at a glance:

    Facilitates assembly, maintenance and repairs.
        The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
        The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
        The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
        The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
        In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
        Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
        The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
        The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.

    The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics. It’s as robust as ever.

    Recommended main rotor blade sizes are 750-810 mm, depending on your personal taste and style of flying.

    To power the 80, you can rely on reliable components from the LOGO 800 XXtreme, with 6 mm x 50 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft.

    Two gear ratios are available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.

    Motors with a larger bell than e.g. a Scorpion 4535-380 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.

    The newly designed canopy of the LOGO 800 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 800 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor. This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.

    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,500 g / 12.13 lb is possible.

    SKU: MIK-05444
    €1169.00
    inc. VAT

     72HR STOCK
    NEW

Manufacturers

Back