Lipo 3S 11.1V

Products


  • 3S 11.1V 2200mAh/30c

    3S 11.1V 2200mAh/30c

    ●This Li-poly battery features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 450 series and other professional model airplanes, cars, and guns.
    ●Max Continuous Discharge: 30C(66A), Burst Discharge: 40C(88A). Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.
    ●Recommend to discharge the battery within 80% of rated discharge, keep 90% capacity when over 100 cycles, keep 85% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

    ●Output:11.1V(3S1P) Nominal,2200mAh
    ●Dimension:104x36x22mm
    ●Weight:165g

    SKU: HBP22001
    €28.99
    inc. VAT

     72HR STOCK
  • Align 3S1P 11.1V 2200mAh 30C

    Align 3S1P 11.1V 2200mAh 30C

    This Li-poly battery features high efficient and high discharge, use a inspection machine to match packs, suitable for TREX 450 series and other professional model airplanes, cars, and guns.
    Max Continuous Discharge: 30C(66A), Burst Discharge: 40C(88A). Normal operating temperature is approx. 40-65°C(within 80% of rated discharge). Max. temperature: 80°C.
    Recommend to discharge the battery within 80% of rated discharge, keep 95% capacity when over 100 cycles, keep 90% capacity when over 150 cycles.(The cycle life and efficiency will reduce due to high current, high temperature and over-discharge)

    Specification:

    • Output: 11.1V 2200mAh 24.4Wh(3S1P)
    • Dimension: 104x36x22mm
    • Weight: 165g
    • Support 5C charging (Charging error could result in battery explosion, fire, and other unexpected danger or property loss. Please always charge batteries with equipment in sight, do not leave charger unattended. Should you need to leave the charging area, please remove the battery and abort charging process.)

    NOTE:
    When using high energy Li-poly Battery, please do not over-discharge, over-charge batteries, or result over-high temperature. Discharging capacity can't exceed 80% of the max capacity after full charging to ensure a good cycle performance.Recommend to full charge a brand new battery before using and only discharge the battery 50% for first 5 times to make a good efficiency of the battery. Please make it a habit to always count time for flight, or please set a low voltage protection on ESC (Cell voltage after stopping using can not lower than 3.2V). Do not use the battery at insufficient of voltage.

    Do not expose batteries to sunshine or store/ charge batteries at the temperature up to 35? in a airtight car. The environment high temperature could cause the damage or the danger of burst. If the battery becomes hot while high current discharging or flying, please do not charge the battery immediately. Wait to cool down(about 20 mins), then inspect to recharge. If against follow the original factory using rules, possibly cause the battery to inflate or any dangerous accident happens.

    Do not leave the charger is operating unattended as it may cause a fire.

    SKU: HBP22003T
    €26.99
    inc. VAT

     LOW STOCK
    NEW
  • Align 3S1P 11.V 850mAh/30C Battery

    Align 3S1P 11.V 850mAh/30C Battery

    Features :
    • Output : 11.1V 9.5wh ( 3S1P ) 850mAh
    • Rating : 30C continuous, 40C burst
    • Dimension : 55 x 30 x 24.5mm
    • Weight : 70g
    SKU: HBP85001
    €18.00
    inc. VAT

     IN STOCK
  • Dys 2200 mah Lipo Battery 3s for X230

    Dys 2200 mah Lipo Battery 3s for X230

    Dys 2200 mah Lipo Battery 3s for X230

    Specifications:

    • Type: Lipo
    • Capacity: 3S - 11.1v - 2200mah
    • Charging temperature: 0°C - 45°C
    • Discharging temeperature: -15° - 50C°C
    • Charging/discharging relative humidity : < 80%
    SKU: DYS22003S
    €39.00
    inc. VAT

     LOW STOCK
  • EPS 3S 1000 mAh 30C Lipo Battery

    EPS 3S 1000 mAh 30C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 1000 mAh 30C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specifications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 1000mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 30C (30A)
    • Maximum peak discharge (3s): 60C (60A)
    • Weight: 85g
    •  Dimensions (ep x width x length): 17.8 mm x 35 mm x 66 mm
    • Power Connector: XT 30
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS1000-3S30XT30
    €14.90
    inc. VAT

     LOW STOCK
  • EPS 3S 1050 mAh 75C - Top Racing Edition Connector XT60

    EPS 3S 1050 mAh 75C - Top Racing Edition Connector XT60

    FEATURES of lipo 1050 mah-3s 11.1V - 75 / 120C:

    • Product type: Pack polymer lithium battery (Lipo)
    • Capacity: 1050mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge:  75C (78,75A)
    • Maximum peak discharge (3s):  120C (126A)
    • Weight: 96g
    • Dimensions (ep x width x length): 20 mm x 36 mm x 70 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 2 - 5C Recommended

     

    SKU: EPS1050-3S75XT60
    €21.10
    inc. VAT

     IN STOCK
  • EPS 3S 1300 mAh 40C Lipo Battery

    EPS 3S 1300 mAh 40C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 1300 mAh 40C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specificications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 1300mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 40C (52A)
    • Maximum peak discharge (3s): 70C (91A)
    • Weight: 113g
    • Dimensions (ep x width x length) 22.5 mm x 35 mm x 66 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS1300-3S40XT60
    €19.90
    inc. VAT

     72HR STOCK
  • EPS 3S 1300 mAh 60C Lipo Battery

    EPS 3S 1300 mAh 60C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 1300 mAh 60C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    EPS 3S 1300 mAh 60C Lipo Battery

    Specification:

    • Capacity: 1300mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 60C (78A)
    • Maximum peak discharge (3s): 90C (117A)
    • Weight: 133,5g
    • Dimensions (ep x width x length): 24.7 mm x 36 mm x 70 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS1300-3S60XT60
    €24.90
    inc. VAT

     LOW STOCK
  • EPS 3S 1300 mAh 75C Lipo Battery

    EPS 3S 1300 mAh 75C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 1300 mAh 60C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    EPS 3S 1300 mAh 60C Lipo Battery

    Specification:

    • Capacity: 1300mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 70C (97,5A)
    • Maximum peak discharge (3s): 120C (156A)
    • Weight: 119g
    • Dimensions (ep x width x length): 22 mm x 35 mm x 71 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS1300-3S75XT60
    €24.90
    inc. VAT

     72HR STOCK
  • EPS 3S 1600 mAh 30C Lipo Battery

    EPS 3S 1600 mAh 30C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 1600 mAh 30C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specificications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 1600 mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 30C (48A) maximum peak discharge (3s): 60C (96A)
    • Weight: 130g
    • Dimensions (ep x width x length): 21.4 mm x 35 mm x 85 mm
    • Power Connector: XT-60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS1600-3S30XT60
    €21.90
    inc. VAT

     LOW STOCK
  • EPS 3S 1800 mAh 60C Lipo Battery

    EPS 3S 1800 mAh 60C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 1800 mAh 60C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specificications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 1800mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 60C (108A)
    • Maximum peak discharge (3s): 90C (162A)
    • Weight: 158g
    • Dimensions (ep x width x length): 25.9 mm x 31 mm x 101 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS1800-3S60XT60
    €25.90
    inc. VAT

     LOW STOCK
  • EPS 3S 2200 mAh 40C Lipo Battery

    EPS 3S 2200 mAh 40C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 2200 mAh 40C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specifications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 2200mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 40C (88A)
    • Maximum peak discharge (3s): 70C (154A)
    • Weight: 191g
    • Dimensions (ep x width x length): 24 mm x 35 mm x 101 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended
    SKU: EPS2200-3S40XT60
    €26.90
    inc. VAT

  • EPS 3S 2200 mAh 75C with XT60

    EPS 3S 2200 mAh 75C with XT60

    EPS 3S 2200 mAh 75C with XT60

    The Lipo-Batteries from EPS E Propulsion Systems are made in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The amazingly powerful EPS 3S 2200 mAh 75C Lipo Battery is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specificications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 2200mAh
    • Voltage: 11,1V
    • Maximum Continuous Discharge: 75C (175A) Maximum peak discharge (3s): 140C (308A)
    • Weight: 195g
    • Dimensions (ep x width x length): 26.5 mm x 35 mm x 101 mm
    • Power Connector: XT60
    • Balancing Connector: JST-XHS
    • Number of C load: 2 - 5C Recommended

    Can be used with FPV Racers, Park flyers, Acrobatic models, Helis 450 size, multirotors, turbines...

    SKU: EPS2200-3S75XT60
    €32.90
    inc. VAT

     IN STOCK
  • EPS 3S 3300 mAh 40C Lipo Battery

    EPS 3S 3300 mAh 40C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The powerful EPS 4S 3750 mAh 40C Lipo Battery is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specification:

    • Capacity: 3300mAh
    • Voltage: 11,1V
    • Maximum Continuous Discharge: 30C (99A)
    • Maximum peak discharge (3s): 60C (198A)
    • Weight: 234g
    • Dimensions (ep x width x length): 17.7 mm x 45 mm x 134 mm
    • Power Connector: XT 90
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended

    Note:
    This Lipo can't be send by Airmail!

     

    SKU: EPS3300-3S30XT90
    €35.90
    inc. VAT

     72HR STOCK
  • EPS 3S 3500 mAh 20C Lipo Battery

    EPS 3S 3500 mAh 20C Lipo Battery

    EPS 3S 3500 mAh 20C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France.
    Their products are 100% French and 0% Asian, therefore these products are the best quality.
    The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price.
    The powerful EPS 3S 3500mAh mAh 20C Lipo Battery is made from the best materials.

    For use on model aiplanes, acrobatics, motorglider, small copter, multirotors...

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specification:

    • Capacity: 3500mAh
    • Voltage: 11,1V
    • Maximum Continuous Discharge: 20C (70A)
    • Maximum peak discharge (3s): 40C (140A)
    • Weight: 240g
    • Dimensions (ep x width x length): 18 mm x 44 mm x 134 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended

    Note:
    This Lipo can't be send by Airmail!

     

    SKU: EPS3500-3S20XT60
    €31.90
    inc. VAT

     72HR STOCK
  • EPS 3S 3750 mAh 30C with XT90 Lipo Battery

    EPS 3S 3750 mAh 30C with XT90 Lipo Battery

    EPS 3S 3750 mAh 30C with XT90 Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France.
    Their products are 100% French and 0% Asian, therefore these products are the best quality.
    The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price.
    The powerful EPS 3S 3750mAh mAh 30C Lipo Battery is made from the best materials.

    For use on model aiplanes, acrobatics, motorglider, small copter, multirotors...

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specification:

    • Capacity: 3750mAh
    • Voltage: 11,1V
    • Maximum Continuous Discharge: 30C (112.5A)
    • Maximum peak discharge (3s):60C (225A)
    • Weight: 283g
    • Dimensions (ep x width x length): 21.5 mm x 45 mm x 135 mm
    • Power Connector: XT 90
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended

    Note:
    This Lipo can't be send by Airmail!

    SKU: EPS3750-3S30XT90
    €35.90
    inc. VAT

     72HR STOCK
  • EPS 3S 500 mAh 75C - TOP RACING EDITION with XT30

    EPS 3S 500 mAh 75C - TOP RACING EDITION with XT30

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 1S 500 mAh 25C Lipo Battery Molex with PCM is a small, but powerful battery and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specifications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 500mAh
    • Assembly: 3S
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 75C (37.5A)
    • Maximum peak discharge (3s): 120C (60A)
    • Weight: 47g
    • Dimensions (ep x width x length): 15 mm x 31 mm x 56 mm
    • Power connector: XT30
    • Number of C support: 2-5C Recommended
    SKU: EPS500-3S75XT30
    €14.90
    inc. VAT

     IN STOCK
  • EPS 3S 5000 mAh 30C with XT60 Lipo Battery

    EPS 3S 5000 mAh 30C with XT60 Lipo Battery

    EPS 3S 5000 mAh 30C with XT60 Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France.
    Their products are 100% French and 0% Asian, therefore these products are the best quality.
    The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price.

    For use on model aiplanes, acrobatics, motorglider, small copter, multirotors...

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specification:

    • Capacity: 5000mAh
    • Voltage: 11,1V
    • Maximum Continuous Discharge: 30C (150A)
    • Maximum peak discharge (3s):60C (300A)
    • Weight: 364g
    • Dimensions (ep x width x length): 28.6 mm x 45 mm x 135 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 3C Recommended

    Note:
    This Lipo can't be send by Airmail!

    SKU: EPS5000-3S30XT60
    €46.90
    inc. VAT

     LOW STOCK
  • EPS 3S 630 mAh 75C - Top Racing Edition XT60

    EPS 3S 630 mAh 75C - Top Racing Edition XT60

    Features:

    • Product type: Pack polymer lithium battery (Lipo)
    • Capacity: 630mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge:  75C (47,25A)
    • Maximum peak discharge (3s):  120C (75,6A)
    • Weight: 59g
    • Dimensions (ep x width x length): 19 mm x 33 mm x 56 mm
    • Power Connector: XT 30
    • Balancing Connector: JST-XHS
    • Number of C load: 2 - 5C Recommended


    With the new battery packs E DRIVE SYSTEMS 63 0mAh 75C specially designed to meet the energy needs of small machines 120-150 size you will not have excuses!

    EPS responding to extreme constraints placed propulsion packages in the use of race racer FPV by specific packs, giving you access to the latest technologies and know-how in lipo cell design combined with a selection of materials and electrolyte Grade A.

    The pack EPS630-3S75XT30 Top Competition Racing Series is the ultimate in the field than any mini machine driver must possess to make the most of its frame and reach the highest steps of the podium .. You will realize by using it all packs concurence announced far as 75C don 'are not!

    SKU: EPS630-3S75XT30
    €13.00
    inc. VAT

     IN STOCK
    NEW
  • EPS 3S 920 mAh 75C Lipo Battery

    EPS 3S 920 mAh 75C Lipo Battery

    The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France. Their products are 100% French and 0% Asian, therefore these products are the best quality. The products they sell are selected on their quality and are sold throughout whole Europe. Their products are quality for a very good price. The EPS 3S 900 mAh 60C Lipo Battery is great, powerful and is made from the best materials.

    E Propulsion systems, your best source for Lithium Polymer (LiPo)

    Specificications:

    • Product Type: Battery Pack lithium polymer (LiPo)
    • Capacity: 920mAh
    • Voltage: 11.1V
    • Maximum Continuous Discharge: 75C (69A)
    • Maximum peak discharge (3s): 120C (110,4A)
    • Weight: 85g
    • Dimensions (ep x width x length): 20 mm x 32 mm x 68 mm
    • Power Connector: XT 60
    • Balancing Connector: JST-XHS
    • Number of C load: 1 - 5C Recommended
    SKU: EPS920-3S75XT60
    €21.90
    inc. VAT

     IN STOCK
  • GENS ACE 1000MAH 11.1V 25/50C 3S1P LIPO BATTERY PACK

    GENS ACE 1000MAH 11.1V 25/50C 3S1P LIPO BATTERY PACK

    Gens ace lipo 1000mah 3s1p 25c/50c battery Suited to the following models:
    Matched strictly by the lowest internal resistance/ capacity/ and voltage for maximum power and cycle life.

    • Standard JST/XH Balance Plug
    • Easily monitor the condition of the battery
    • Provide greater speed and longer runtimes
    • 5C fast charge capable
    • Gens ace lipo pack are always advertised with its actual C ratings
    Specification:

    • Product Type:lipo battery pack
    • Capacity: 1000mAh
    • Voltage: 11.1V
    • Max Continuous Discharge: 25C (25A)
    • Max Burst Discharge: 50C (50A)
    • Weight:: 96 g
    • Dimensions: 72.37*35.75*19.40 mm
    • Balance Plug: JST-XH
    • Discharge Plug: 4.0mm banana or T plug
    • Charge Rate: 1-3C Recommended, 5C Max
    SKU: B-25C-1000-3S
    €14.00
    inc. VAT

     LOW STOCK
  • GENS ACE 1600mAh 11.1V 40C 3S1P Lipo Battery Pack

    GENS ACE 1600mAh 11.1V 40C 3S1P Lipo Battery Pack

    Specificiations:

    • Product Type:lipo battery pack
    • Coupon code: Easter-CS80-84T8-PPT5
    • Max Continuous Discharge:40C (64)
    • Max Burst Discharge: 80C (128A)
    • Weight: 149 g
    • Dimensions: 104*34*18 mm
    • Balance Plug: JST-XH
    • Charge Rate: 1-3C Recommended, 5C Max
    • Net Weight (g):     149
    • Capacity: 1600 mAh
    • Discharge Rate (C): 40
    • Max Cont Current (A): 64
    • Max Burst Current (A): 128
    • Max Burst discharge Rate (C): 80
    • Parallel (P): 1
    • Voltage: 3S (11.1V)
    • Length (mm): 104
    • Width (mm): 34
    • Thickness(mm): 18
    • Wire Gauge: No
    • Wire Length (C/D): No
    • Connector Type: No

    Balancer Connector Type: JST-XH

    SKU: B-40C-1600-3S1P
    €19.90
    inc. VAT

     72HR STOCK
  • GENS ACE 1800mAh 11.1V 40C 3S1P Lipo Battery Pack

    GENS ACE 1800mAh 11.1V 40C 3S1P Lipo Battery Pack

    Gens ace 1800mAh 11.1V 40C 3S1P Lipo Battery Pack

    Gens ace lipo 1800mah 3S1P 40C lipo battery packs Max Burst Discharge: 80C,Gens ace lipo 1800mah 3s1p battery suited to the following model: foamy airplane, 1/16,1/18 scale mini car, small helicopter.

    • Product Type:lipo battery pack
    • Capacity: 1800mAh
    • Voltage: 11.1V
    • Max Continuous Discharge: 40C (72A)
    • Max Burst Discharge: 80C (144A)
    • Weight: 155.2 g
    • Dimensions: 89*31*25 mm
    • Balance Plug: JST-XH
    • Discharge Plug: T plug
    • Charge Rate: 1-3C Recommended, 5C Max
    SKU: B-40C-1800-3S1P
    €25.90
    inc. VAT

     72HR STOCK
  • Gens ace 2200mAh 11.1V 25C 3S1P Lipo Battery Pack

    Gens ace 2200mAh 11.1V 25C 3S1P Lipo Battery Pack

    Gens ace 2200mAh 11.1V 25C 3S1P Lipo Battery Pack

    Specification:

    • Product Type:lipo battery pack
    • Capacity: 2200mAh
    • Voltage: 11.1V
    • Max Continuous Discharge: 25C (55A)
    • Max Burst Discharge: 50C (110A)
    • Weight:: 195 g
    • Dimensions: 106*34*26 mm
    • Balance Plug: JST-XH
    • Discharge Plug: T plug
    • Charge Rate: 1-3C Recommended, 5C Max

    SKU: B-25C-2200-3S1P
    €24.00
    inc. VAT

     72HR STOCK

Manufacturers

Back