Immersion RC

Immersion RC

Immersion RC is producer of Fpv equipment for Drones/Quadcopters.

 

Products


  • 5,8 GHz ImmersionRC 25mW A/V transmitter

    5,8 GHz ImmersionRC 25mW A/V transmitter

    Small size High Quality 5,8 GHz Immersion RC 25 mW A/V transmitter

    With all 2,4 GHz RC Radios like FASST, Spektrum, Jeti Duplex compatible !

    Datasheet:

    • Transmission power: 25mW
    • Channels: 7(5740,5760,5780,5800,5820,5840,5860 MHz)
    • Stereo Sound: 2x line IN
    • Supply Voltage: 7-25 V DC
    • Size: 80x35x10mm
    • Weight: 29g (incl. Antenna)

    The Transmitter comes witch: a 5,8 GHz 2,5dBi Antenna, cabling type is selectable and a BEC Plug
    This product is CE certified, and conform with EU rules.

    SKU: IMRC25MWAV
    €69.90
    inc. VAT

     72HR STOCK
  • 5,8 GHz ImmersionRC UNO5800 V2 A/V receiver

    5,8 GHz ImmersionRC UNO5800 V2 A/V receiver

    Small High Quality A/V-Receiver.

    With all 2,4 GHz RC Radios like FASST, Spektrum, Jeti Duplex compatible !

    Datasheet:

    • Sensitivity: up to -90dBm
    • Channels: 7(5740,5760,5780,5800,5820,5840,5860 MHz)
    • Videooutputs: 2x 3,5mm Jack
    • Supply Voltage: 6-13 V DC
    • Size: 85x75x25mm
    • Weight: 130g (incl. Antenna)


    The Receiver comes with: 1x  A/V-Chinch-cable, 1x Antennas, 1x Powercable

    SKU: IMRCAVRX
    €74.99
    inc. VAT

     72HR STOCK
  • Immersion Long-Range RC EzUHF 8 channel diversity Receiver

    Immersion Long-Range RC EzUHF 8 channel diversity Receiver

    The Immersion RC EzUHF 8 channel receiver was created with FPV and UAV enthusiasts in mind with the purpose of allowing for greater reception and more reliable control of the aircraft, even during difficult and long distance flights, as long as there are no line of sight issues. It has been designed to support twin diversity antennas configuration and EzOSD connectivity. It is about the same size as any standard 8 channel receiver used in the popular radiotransmitters and weighs only 18 grams.
    Due to smart configuration there are no connectors sticking out and outputs have been properly decoupled and filtered to guarantee ease of use.
    Another feature of Immersion RC EzUHF 8 channel receiver is a highly dependable FHSS link which provides both Frequency Hopping and Spread Spectrum technology for the more reliable connection during the flight. ImmersionRC EzOSD on Screen Display system can be used as an addition to the Immersion RC EzUHF 8 channel receiver to relay error messages and the RSSI.
    The USB port is integrated into Immersion RC EzUHF 8 channel receiver to enable any possible firmware upgrades and updates. It can be used with ImmersionRC application software to configure the receivers the way you need, including Mikrocopter mode, diagnostics or cloning of channels with minimal time spent on setting things up.

    Specifications:

    • 433MHz/70cm Ham band operation
    • 112dBm Sensitivity
    • Bi-directional ready (contains onboard transmitter)
    • Ceramic filtered inputs, eliminates nearby high-power video Tx interference
    • Mikrokopter mode, emits PPM on a chosen channel
    • Vehicle mode, couples two chosen channels (ideal for coupling steering servos on monster trucks)
    • USB Connection for easy firmware upgrades, and advanced configuration
    • EzLink connection to a EzOSD, providing in-flight display, and telemetry down-linked parameters
    • RSSI Ant 1, Ant 2
    • Frequency Error
    • SNR for each freq. bin
    • Link Quality
    • Standard SMA antenna connectors, compatibility with standard 433/70cm band antennas
    • 8 standard servo connectors
    • Failsafe, preset by button on the EzUHF transmitter
    SKU: EZUHF8DIV
    €129.00
    inc. VAT

     IN STOCK
  • Immersion RC 433MHz 'Sander Style' whip Antenna

    Immersion RC 433MHz 'Sander Style' whip Antenna

    Single 'Sander Style' Monopole antenna, for the 433MHz (70cm) band, suitable for use with EzUHF Receivers. That' s a good choice for your receivers.

    Right-angle SMA connector with a piano-wire whip, flexible enough to survive some serious abuse

    SKU: ANT433SSRA
    €3.00
    inc. VAT

  • ImmersionRC 5.8GHz Circular Polarized SpiroNet Antenna V2 (RP-SMA) (Female)

    ImmersionRC 5.8GHz Circular Polarized SpiroNet Antenna V2 (RP-SMA) (Female)

    ImmersionRC 5.8GHz Circular Polarized SpiroNet Antenna V2 (RP-SMA) (Female)

    New SpiroNET 5.8GHz circular polarized antenna from ImmersionRC and FatShark.
    Set includes a 3, and a 4-leaf Skew Planar Wheel.
    Right-hand circular polarization, Standard SMA Polarity (RP-SMA)

    Precision manufactured with very tight tolerances ?and 100% tested on a professional antenna tester (Rhode & Schwartz)
    to ensure maximum range and performance.
    Antenna uses a high quality semi-rigid cable, that can be bent to any angle and maintain its shape in any orientation.
    Extra long cable on the 4-leaf Skew antenna to clear your head (which blocks 5.8GHz emissions) for goggle installation.?

    The custom radome is RF-transparent, and protects the antenna from the occasional crash, or that oops moment when flying.?
    RP-SMA connector compatible with Chinese Tx and Rx
    Right-hand circular polarization

    Specifications:

    • Skew (RX/TX)
    • Weight: 11.5g
    • Connector: SMA
    • Case size: 33.5m(w) 16mm(h)
    • Cable Length: 82mm
    SKU: RPSN5G8RHS
    €39.90
    inc. VAT

     72HR STOCK
  • ImmersionRC EzUHF Long-Range Radio Transmitter

    ImmersionRC EzUHF Long-Range Radio Transmitter

    A magnificent piece of engineering, a musthave for the serious FPV or UAV pilot. Couple with one of our receiver modules, for a reliable longrange FHSS control link
    Please check your country regulations regarding UHF licenses and frequencies

    Highlights:

    • Reliable FHSS Link (Frequency Hopping, Spread Spectrum)
    • 433MHz/70cm Ham band operation
    • GFSK modulation
    • 600mW (~28dBm) output power
    • Direct headtracker input, adding headtracker compatibility to most radios
    • Power switch, boost power when at long range
    • Standard SMA antenna connector, compatibility with 70cm antennas
    • Flexible buffered, ACcoupled, PPM input, ensures compatibility with 3.3v thru 9.6v PPM levels
    • Standard USB port (MiniA) for firmware upgrades, and system configuration
    • Single pushbutton learning of failsafe positions
    • Binding function, which allows binding Single Tx>Rx, Multi Tx>Rx, and Single Tx>Multi Rx
    • Mates with 8 channel, and 4 channel EzUHF receivers
    • Power sourced directly from the R/C Tx (Futaba), or optional DC power jack
    • Built in receiver, for future expansion
    • Custom extruded brushed aluminum enclosure

    SPECS:

    • Width 52.3 mm
    • Depth 6,5 mm
    • Weight 49.2 grams
    SKU: EZUHFTX1
    €209.00
    inc. VAT

     IN STOCK
  • ImmersionRC Vortex 250 PRO FPV RACING DRONE 25mw

    ImmersionRC Vortex 250 PRO FPV RACING DRONE 25mw

    ImmersionRC has designed the new Vortex 250 Pro as a purebred, high-speed FPV racer. They swapped out the ‘F1’ processor for the ‘F3’, added an integrated Black Box recorder, Gen2 20A ESCs, Serial receiver support… and so much more. As with the Vortex 285, the 250 is ARF, just add a compatible R/C Rx (CPPM, Spektrum, S-Bus, XBus, EzUHF, etc. etc.), and a battery, and go race, everything else is included, from the SpiroNET Tx antenna, to the props

    Features:

    • State-of-the-art ‘F3’ FC processor
    • 2nd Generation 20A EzESCs with OneShot125, rotorSENSE
    • Built in black-box recorder (2MB)
    • Rigid 4mm Carbon Fibre arms (non-foldable)
    • Direct connection to PPM, Spektrum, S-Bus, XBus receivers
    • Ear-piercing Lost Model Alarm (much louder than it’s predecessor)
    • GoPro-3/4 mount included

    Specs:

    • Size (diagonal): 250mm (275mm option for 6" Props)
    • Frame: 2mm Carbon Fiber, with 15x Aluminium Standoffs
    • Motors: 2204-2300 (CW and CCW)
    • ESC: 20/22A EzESC
    • Flight Controller:STM32F303 based ('F3')
    • OSD:Full Graphic
    • Arms: 4mm Flat CF
    • BlackBox with 2MB data storage
    • Rx Support: Native CPPM, S-Bus, Spektrum, XBus, SumD, SumH
    • Rx Selection: Fully Automatic
    • Case: Zipper case options at order time
    • Camera Mount: GoPro 3/4, mount included
    • USB Port: Through-Hole (Much more robust)
    • LED Board: v2, more robust
    • Standoffs: Metal (all of them)
    • FlightCam: 700TVL CMOS v2

    Included:

    • Vortex 250 Pro with Zipper case
    • 2x ImmersionRC Branded battery straps
    • SpiroNET Omni 5.8GHz antenna
    • PPM Interface Cable
    • Spektrum(tm) Interface Cable
    • SBus Interface Cable
    • 8x Gemfan 5045BN GFK Props
    SKU: VORTEXPRO
    €499.00
    inc. VAT

     72HR STOCK
  • SN5G8RHSET Immersion RC 5.8 GHz SpiroNET Antenna Set

    SN5G8RHSET Immersion RC 5.8 GHz SpiroNET Antenna Set

    SN5G8RHSET Immersion RC 5.8 GHz SpiroNET Antenna Set

    New SpiroNET 5.8GHz circular polarized antenna from ImmersionRC and FatShark. This set includes 2 Skew Planar Wheel Right-hand circular polarization. Unique design, not seen before in the FPV world. Far from the run of the mill 'basement production seen to date. Precision manufactured with very tight tolerances ?and 100% tested on a professional antenna tester (Rhode & Schwartz) to ensure maximum range and performance. Antenna uses a high quality semi-rigid cable, that can be bent to any angle and maintain its shape in any orientation. Extra long cable on the 4-leaf Skew antenna to clear your head (which blocks 5.8GHz emissions) for goggle installation. The custom radome does not affect the signal and protects the antenna from the occasional crash, or that oops moment when flying.

    Specification:

    • Typical Impedance at 5.8GHz > 50 Ohm
    • SWR > <1.35 at 5.8GHz
    • Gain > 0.95dBic
    • Polarization > Left- or Right-hand circular (LHCP, RHCP)
    • Radiation pattern > 360-degrees
    • Configuration > 4-lobe skew planar
    • Dimensions (LxWxH) > 108x34x34mm
    • Weight (Grams) > 12 grams
    • Connector > SMA male
    SKU: SN5G8RHSET
    €39.90
    inc. VAT

     72HR STOCK
  • XuGong V2 Pro 2-Axis Brushless Gimbal – Foldable FPV Quadcopter

    XuGong V2 Pro 2-Axis Brushless Gimbal – Foldable FPV Quadcopter

    This is a 2-axis Brushless Gimbal for the XuGong v2/Pro Quadcopter . Compatible with all GoPro 3, and 4 cameras.

    A custom brushless GoPro gimbal, designed by one of the industry leaders, is integrated into the XuGong v2/Pro design.

    Specs:

    •     Weight: 140g
    •     Working voltage: 7v-17v
    •     Max. Roll angle: -55 - +55 degrees
    •     Max. Pitch angle: -180 - +60 degrees
    •     Direct connection to the Power Distribution/OSD board on the XuGong v2/Pro

    Integrated Brushless Gimbal:

    Pan and Roll signals picked out of the single-cable Rx connection by the onboard OSD.
    Install a new GoPro Hero 4, for stabilized 4k video footage.
    The Power Distribution board includes an on-board quiet switching regulator which powers the GoPro with no GoPro battery required.

    SKU: XUGONGV2GIMGAL
    €249.90
    inc. VAT

     LOW STOCK
  • XuGong v2/Pro – Foldable FPV Quadcopter Kit

    XuGong v2/Pro – Foldable FPV Quadcopter Kit

    XuGong v2/Pro – Foldable FPV Quadcopter

    The most portable FPV quadcopter on the market today. A full-featured quadcopter constructed from beautiful carbon fiber, and CNC-milled aluminium.


    The FPV’ers Quadcopter
    The XuGong v2/Pro was designed by FPVers, for FPVers.
    Designed for fully immersive flight, delivering high-quality, stabilized video footage, from a tailor-made aerial platform.

    Desrciption:

    • Compact Foldable Design
    • Lightweight frame leads to > 20 minute flight times
    • Built-in EzOSD, with multicopter enhancements
    • Single-cable link to the EzUHF, with full up-link status
    • Carbon fiber frame, CNC milled aluminium arms
    • Integrated telemetry down-link
    • USB port for future upgrades

    Telemetry Down-link:
    The XuGong v2/Pro transmits all on-board telemetry to the ground, using the A/V down-link.
    Battery status, Uplink status (RSSI, Link quality, etc.), GPS position, are all available in the telemetry stream.
    The ImmersionRC Antenna Trackers can use this data to point a high-gain antenna directly at the model.
    The iTelemetry dongle provides an interface between this telemetry feed, and a smartphone/tablet, with applications available for the iOS and Android devices.


    Very Compact:
    There are not many product on the market that fold into such a small space, with just a few seconds required to unfold and fly.
    Props remain attached, no tools required, ‘Press, Unfold, and FLY!’

    Specifications:

    • Max. Prop Size: 10 Inch
    • OSD: EzOSD-based, with Multicopter additions
    • Flight Controller: DJI Naza Lite, -M, v2 recommended, others supported
    • GPS: Naza GPS pickoff (Position + static Magnetometer)
    • Camera Switch: Manual, between Flight Cam, and GoPro, with auto-failover
    • Camera Power: 1.5A for GoPro, FlightCam powered from Video Tx
    • Flight Cam: Bracket to mount FatShark CMOS 600TVL + others (optional accessory)
    • Weight: AUW, RTF, ~1.5kg (typical)
    • Folded Size: 24cm W x 30cm L x 14cm H
    • Suitable Battery: 5200mAh 4s 10C recommended (for 20 minute flight times)
    • Suitable Motors: 2212/920kV, DJI E300, or Tiger AirGear 350
    • Flight Time: Typ. 20 min

    Included in the kit:

    • CNC-milled aluminium & carbon fiber frame
    • Wirering
    • PCB

     

    SKU: XUGONGV2PROKIT
    €249.90
    inc. VAT

     LOW STOCK

Manufacturers