Generic Upgrades

CLUTCH  LINING material, Thickness of 1.5mm , fits All nitro and gas motors using Clutch sytems.

The biggest advantage of this material that its thicker than provided in the clutches material, and will fit better the clutch,preventing it from over openning and breaking.

for more tips how to use it, contact us.

Included clutch lining material +/-10x30cm, which should be enough for 5-8 liners.

Flybar conus weight and stiffener.
Those conical  adapters must be fitted on any Helicopter to balance the flybar.
The conus creates good and equal Load Sharing on the Flybar Area and will prevent the flybar to weaken and break as a result of vibrations.This is a "Must" part for any Helicopter.
Fit 4mm flybars , made from  7075 Alu , set of 2 pieces.

FORK LEVER 2-ARM 24/30MM Futaba

Specifications:

• Double fork servo lever with precise teeth (variant)
• Gap servo driven ball center to 24mm / 30mm.
• Fork opening 5 mm. 2.2 g weight.
• Supplied with built-in ball joints
• The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp rudder.
• The new design of our double fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The redesign of our fork servo lever is designed for ruggedness.
• The power dissipation occurs in the middle of the servo gearing.
• The execution of a fork lever effectively prevents misjudged the servo drive output.
• The servo gear will last longer.
• Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
• At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
• Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
• The result is a high strength component which need not fear comparison with Duralaluminium.
• However, it is lighter and vibration resistant. All servo lever are manufactured in Germany using the latest CNC machines.

A set of 10mm diameter alloy mounting spacers ideal for the fitting of header tanks to chassis side frames.

Set includes a 10mm, 15mm and 20mm length mounts plus six different length M3 socket cap screws and nyloc nuts allowing you to also make up 25mm, 30mm and 35mm mounts by adding two spacers together.

Header Tank Size 60 C.C Assembly with Plastic Holder Black 
Size: 77mm x 40mm x 27mm
Weight: 22g
Color: Black
Holder material: Plastic

This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

• Length 26mm( end to end)
• Rod diameter tread-M2-2.5
• Ball mounting screw-M2
• Set of 2 links with hardware

FEATURES:
 

• BLACK nylon link construction
• Brass swivel-ball construction
• Beveled brass swivel-ball stand-off
• Hex-Head machine mounting screw

This is a set of Heavy-Duty Ball Links for use with M3 Threaded Rods.
Perfectly can be used on helicopters, Airplanes, cars and boat.

Size of ball link:

• Length 27mm( end to end)
• Rod diameter tread- M3
• Ball mounting screw-M2
• Set of 2 links with hardware

FEATURES:
 

• White nylon link construction
• Brass swivel-ball construction
• Beveled brass swivel-ball stand-off
• Hex-Head machine mounting screw

We believe these "acetol" polymer resin undercarriages to be THE strongest and most energy absorbing units available.Suitable for use on all helis from 30 to 60 size.

Avaliable in Black or White color , with alloy skid tubes and plastic end caps..

We believe these "acetol" polymer resin undercarriages to be THE strongest and most energy absorbing units available.

Suitable for use as an extra heavy duty replacement on helis as small as a 30 size or as a durable alternative on 50, 60 or 90 size machines. The mounting position has been reinforced to allow the struts to be re-drilled to suit virtually any application without effecting strength. The struts stand 80mm tall and have an overall width of 260mm - alloy skid tubes are 11.80mm

These undercarriage anti-slip rubbers simply slip over your helis skid tubes. A must when flying from hard surfaces and perfect to stop your model sliding around during transport. Available in a range of colors and sizes.

Supplied in packs of 4 ,
Colors : GREEN OR BLACK
Sizes : 30-50 OR 60-90