Generic Upgrades

Generic Upgrades Generic upgrades which can be used on most Helicopters

Products


  • 30-50 Size Carbon Boom support

    30-50 Size Carbon Boom support

    Carbon Boom support, with CNC caps

    SKU: RCUO-102
    €16.00 €18.00
    inc. VAT

     72HR STOCK
  • 3D AL servo horn JR servo

    3D AL servo horn JR servo

    3D CNC servo arm, for Jr servos ( standard size)
    Avaliable in - 38mm length , 1 pcs

     

    SKU: KRS299
    €5.00
    inc. VAT

     IN STOCK
  • 3D Purple Paddles m4

    3D Purple Paddles m4

    3D Purple Paddles (2)

    SKU: KS3282
    €4.99
    inc. VAT

     IN STOCK
  • 60-90 Flybar Hardened 4mm

    60-90 Flybar Hardened 4mm

    Made from precision ground steel for excellent strength and corrosion resistance. Those flybars can help to improve hover stability for novice flyers and more 3D response for expert flyers.

    Pack of 1 piece, 4mm diameter, 52cm long.

    SKU: SKU14553
    €4.00
    inc. VAT

     IN STOCK
  • Ball links set

    Ball links set

    Blue or neon red colors, set of 10

    SKU: SKU14187
    €5.00
    inc. VAT

     IN STOCK
  • Boom Support Bridge

    Boom Support Bridge

    Tail Support Bridge , a Must for your heli. Stop vibrations of Boom support .

    Fits 6-8mm supports.

    SKU: KS535
    €7.50
    inc. VAT

     IN STOCK
  • Boom Support Ends (Set of 4)

    Boom Support Ends (Set of 4)

    Suatable for 6 MM CARBON tubes.
    Set of 4

    SKU: RCUO-117
    €10.00 €13.00
    inc. VAT

     IN STOCK
  • Canopy Rubber nuts, 450 size, set of 4

    Canopy Rubber nuts, 450 size, set of 4

    Canopy Rubber nuts, made from wear resistant rubber material.

    can be used on Any 300-450 class helicopter canopy.

    SKU: HS1279
    €3.00
    inc. VAT

     IN STOCK
  • Canopy Rubber nuts, 600-700 size, set of 4

    Canopy Rubber nuts, 600-700 size, set of 4

    Canopy Rubber nuts, made from wear resistant rubber material.

    can be used on Any 600-700 class helicopter canopy.

    SKU: H60149
    €4.00
    inc. VAT

  • Canopy Rubbers Robbe (fits other models) 4pcs

    Canopy Rubbers Robbe (fits other models) 4pcs

    Canopy Rubbers Robbe( fit other models) 4pcs

    SKU: S4199
    €3.50
    inc. VAT

     IN STOCK
  • CANOPY THUMB SCREW

    CANOPY THUMB SCREW

    Aluminium Thumb screw set, Very light, 4 pcs pack.

    M3, fits all size canopies

    SKU: RJX02
    €3.00
    inc. VAT

     72HR STOCK
  • Carbon Boom ms Stinger

    Carbon Boom ms Stinger

    Carbon Boom for MS stinger

    SKU: RCM16360
    €19.00
    inc. VAT

     LOW STOCK
  • Carbon Boom support Ends set

    Carbon Boom support Ends set

    CNC ends set(caps), for 8mm tubes.

    Include 4 pcs, silver Anodized color
     

    SKU: RCRO-103
    €8.00
    inc. VAT

     IN STOCK
  • Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

    Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

    Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm

    Specifications:

    • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 4x2.5mm), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
    • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 4x2.5mm eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
    • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
    • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
    • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
    • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
    • The CFRP ball joint adapter can be painted easily.
    • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
    • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
    • The result is a high strength component, which does not bear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All CFRP components are manufactured in Germany using the latest CNC machines.
    SKU: GA-992003
    €8.00
    inc. VAT

     IN STOCK
    NEW
  • Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

    Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

    Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm

    Specifications:

    • Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm
    • CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 5x3), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
    • Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 3x5 eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
    • The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
    • The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
    • A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
    • In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
    • The CFRP ball joint adapter can be painted easily.
    • Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
    • Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
    • The result is a high strength component, which does not bear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All CFRP components are manufactured in Germany using the latest CNC machines.
    SKU: GA-992002
    €8.00
    inc. VAT

     IN STOCK
    NEW
  • Carbon Flybar Stiffeners

    Carbon Flybar Stiffeners

    These carbon fibre flybar stiffening sets simply slide over the flybar and lock in place with alloy collars. Provide important bending resistance and help protect from handling damage. Available to suit 3 flybars.

    SKU: RCQU-H4020
    €6.00 €11.00
    inc. VAT

     LOW STOCK
  • Carbon Header Tank Mount

    Carbon Header Tank Mount

    High quality carbon fiber header tank mount for any nitro/gas heli.
    Weight - 5gr.

    SKU: RCC001
    €9.00
    inc. VAT

     IN STOCK
  • Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition

    Carbon Landing gear RJX, align 600-700 size, sport edition.
    Fits RJX helicopters, also can fit Align and other models 600-700 size.
    Comes with metal adapters.
    SKU: UP61066
    €34.00
    inc. VAT

     IN STOCK
  • Carbon Tail Boom 22mm

    Carbon Tail Boom 22mm

    Rigid, Lighter and more Stronger then the stock metal boom, made from High Strength material.


    This is a boom to be used on helicopter with sizes OD-22 mm, ID 20.5, Length- 950 mm, so can be adapted to any heli with this OD size.

    Made in Germany

    Thanks to the new technology - this Boom is stronger then the original Metal Boom.

    SKU: RCMX-001
    €69.00 €79.00
    inc. VAT

    
  • Carbon Tail Pushrod

    Carbon Tail Pushrod

    This carbon tail pushrod kit is a must for smooth, positive and accurate tail control The kit includes a pair of CNC machined alloy servo brackets for mounting to the boom, lightweight carbon rod and a pair of end fittings .

    Sizes Available are:

    21,22,24mm

    SKU: RCQU-026
    €34.00 €37.00
    inc. VAT

    
  • CFK fork servo lever 25mm Futaba

    CFK fork servo lever 25mm Futaba

    CFK fork servo lever 25mm Futaba

    Specifications:

    • Fork servo lever with precise teeth (variant).
    • Gap servo driven ball center to 25mm.
    • Fork opening 5 mm.
    • Weight 0.8g.
    • Comes with built-in ball joint and M2 screw with lock nut.
    • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992604FU
    €6.00
    inc. VAT

     IN STOCK
    NEW
  • CFK fork servo lever 30mm Futaba

    CFK fork servo lever 30mm Futaba

    CFK fork servo lever 30mm Futaba

    Specifications:

    • Fork servo lever with precise teeth (variant).
    • Gap servo driven ball center to 30mm.
    • Fork opening 5 mm.
    • Weight 1.5g.
    • Comes with built-in ball joint and M2 screw with lock nut.
    • The high torque of modern digital servos must be free of play and smoothly to the driven element f/exp Rudderblades.
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our servo arms are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
    • At 300 ° C and under high pressure (1800 bar) the leverage to get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992605FU
    €6.00
    inc. VAT

     IN STOCK
    NEW
  • CFK fork servo lever 38mm Futaba

    CFK fork servo lever 38mm Futaba

    CFK fork servo lever 38mm Futaba

    Specifications:

    • Gap servo driven ball center to 38mm.
    • Fork opening 6mm.
    • Fork hole for M3 thread. Weight 3g.
    • Comes with built-in ball joint
    • The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our Servohebel we manufacture of highly compressed carbon fiber plastic.
    • At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992801FU
    €9.00
    inc. VAT

     IN STOCK
    NEW
  • CFK fork servo lever 46mm Futaba

    CFK fork servo lever 46mm Futaba

    CFK fork servo lever 46mm Futaba

    Specifications:

    • Gap servo driven ball center to 46mm.
    • Fork opening 6mm.
    • Fork hole for M3 thread. Weight 3.5g.
    • Comes with built-in ball joint
    • The high torque of modern digital servos must be free of play and smoothly to the driven element (f/exp Rudder).
    • The redesign of our fork servo lever is designed for ruggedness.
    • The power dissipation occurs in the middle of the servo gearing.
    • The execution of a fork lever effectively prevents misjudged the servo drive output.
    • The servo gear will last longer.
    • Our Servohebel we manufacture of highly compressed carbon fiber plastic.
    • At 300 ° C and under high pressure, the levers get their appearance in hardened steel molds.
    • Since this method has similarities with the manufacture of highly stressed components in large aircraft, we have taken it for making our servo arm.
    • The result is a high strength component which need not fear comparison with Duralaluminium.
    • However, it is lighter and vibration resistant.
    • All servo lever are manufactured in Germany using the latest CNC machines.

     

    SKU: GA-992802FU
    €9.00
    inc. VAT

     IN STOCK
    NEW

Manufacturers

Back