250-350 Kits & combos

e-TURBINE 250 FPV racer quadcopter is a small size Multicopter made for racing and funfly! this set including ALL needed to fly.

In general FPV racing,Drone is equiped with a front looking camera and with a real-time broadcast system, so the pilot can watch the pictures with video goggles. In a forest, or on artificial obstacle courses, high speed FPV flying is a challenge when you fly alone, and became very addictive when you practice racing with other modelers. Remember the famous pursuit on the moon of Endor, in the forest, in Star Wars movie. That's what you can expect ! Spare propellers must be expected, but quad racers are very strong and withstand the crashes against obstacles, ground or other competitors models...

This quadracer is delivered as a kit, with a heavy duty carbon fiber/Metal frame. The four 2204 brushless motors and four 12A ESCs are included, and you will also find the CC3D flight controler. Two high intensity 3W front LEDs will be usefull to fly in the dark, and a rear LEDs strap will help your colleagues  to see you and to avoid a contact.

Radio, Lipo, Charger, Camera, Video tx and you ready to go.

Specifications: Please read carefull since our combo providing more value for money !

    Dimensions : 250 size machine
    Flight time : 8 - 13 min
    Weight incl. controller, no lipo- 403 gr

Included in the set:

• Motors : 4 x TB2204
• ESCs : 4 x 12A
• Propellers :4 props 5 x 3"
• Flight contoller- CC3D
• Front LEDs : 2 x 3W white
• Tail light : 140 mm LEDs strip. Steady and 5 flashing modes. 8 intensity levels.
• E-turbine Carry bag
• Camera Sony 1/3 CCD
• Video TX 25MW CE legal
• Radiolink AT9 radio with receiver
• Charger 50w
   
•     Recommended accessories:
•     Battery : LiPo 3S 1000-1600 mAh (not included)
•     Radio system

e-TURBINE 250 FPV racer quadcopter is a small size Multicopter made for racing and funfly!
In general FPV racing,Drone is equiped with a front looking camera and with a real-time broadcast system, so the pilot can watch the pictures with video goggles. In a forest, or on artificial obstacle courses, high speed FPV flying is a challenge when you fly alone, and became very addictive when you practice racing with other modelers. Remember the famous pursuit on the moon of Endor, in the forest, in Star Wars movie. That's what you can expect ! Spare propellers must be expected, but quad racers are very strong and withstand the crashes against obstacles, ground or other competitors models...

This quadracer is delivered as a kit, with a heavy duty carbon fiber/Metal frame. The four 2204 brushless motors and four 12A ESCs are included, and you will also find the CC3D flight controler. Two high intensity 3W front LEDs will be usefull to fly in the dark, and a rear LEDs strap will help your colleagues  to see you and to avoid a contact.

Radio, Lipo, Charger, Camera, Video tx and you ready to go.

Specifications: Please read carefull since our combo providing more value for money !

    Dimensions : 250 size machine
    Flight time : 8 - 13 min
    Weight incl. controller, no lipo- 403 gr

Included in the set:

• Motors : 4 x TB2204
• ESCs : 4 x 12A
• Propellers :4 props 5 x 3"
• Flight contoller- CC3D
• Front LEDs : 2 x 3W white
• Tail light : 140 mm LEDs strip. Steady and 5 flashing modes. 8 intensity levels.
• E-turbine Carry bag
• Camera Sony 1/3 CCD
• Video TX 25MW CE legal

    Recommended accessories:

•     Battery : LiPo 3S 1000-1600 mAh (not included)
•     Radio system

Evo GT is a Beast, Tunning option, Inox screw, high thrust resistance. Now offered as a combo with all you need to fly

Combo including the following:

• EVO GT-CARBON frame kit
• 4x 2204/2206 choice of motors
• 4x ESC 12a Simonk or BLheli
• CC3D or QQ controller
• Sony CCD camera
• Video Transmitter
• Spyro Antenna
• Lipo choice 3 or 4s( Gens /Optipower)
• Radiolink AT9 radio with receiver
• 4 props 5-6"
• Power distribution board

The Gravity 250 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included

The Gravity 250-22 is a frame based on the original Gravity 250. This frame will accommodate the larger 2200 series motors.
 
Main Features:

•     FPV camera protection
•     Motor protection
•     Accessible VTX dip switches from window in Top Cover
•     Lipo balance lead socket
•     Battery strap slots
•     Rubber battery grip pad included
•     Motor ventilation holes
•     LED rear bumper for 8 programmable LED’s
•     Naze 32 LED indicator window
•     Naze 32 pre-drilled mounting holes
•     CC3D PDB pre-drilled holes
•     Large airflow slots in motor arms
•     Machined channels in arms for motor wires
•     Pre-drilled Top Cover
•     Central COG with 3S 1.3ah lipo battery
•     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

Specifications:

•     Material                              HDPE
•     Weight                               152g
•     Size                                    250mm PCD
•     Flight Controller                 Naze32
•     Motor Size                         1806 series
•     Maximum battery size        3S 1.3ah

 
* The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part(s)

The Gravity 280 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included
 
Main Features:

•     FPV camera protection
•     Motor protection
•     Accessible VTX dip switches from window in Top Cover
•     Lipo balance lead socket
•     Battery strap slots
•     Rubber battery grip pad included
•     Motor ventilation holes
•     LED rear bumper for 8 programmable LED’s
•     Naze 32 LED indicator window
•     Naze 32 pre-drilled mounting holes
•     CC3D PDB pre-drilled holes
•     Large airflow slots in motor arms
•     Machined channels in arms for motor wires
•     Pre-drilled Top Cover
•     Central COG with 4s 1800mah lipo battery
•     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

Specifications:

•     Material                             HDPE
•     Weight                               175g
•     Size                                    280mm PCD
•     Flight Controller                Naze32/CC3D
•     Motor Size                         2200 series
•     Maximum battery size       4s-1800mah

 
* The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part(s)

The Gravity 280 FPV Racing frame has been CNC machined to the highest tolerances from two pieces of HDPE. This frame must be one of the toughest racing frames on the market and comes with a Lifetime Frame Warranty*
The Gravity has been designed around specific components to keep the frame as low as possible. This is a frame kit only, electronics are not included
 
Main Features:

•     FPV camera protection
•     Motor protection
•     Accessible VTX dip switches from window in Top Cover
•     Lipo balance lead socket
•     Battery strap slots
•     Rubber battery grip pad included
•     Motor ventilation holes
•     LED rear bumper for 8 programmable LED’s
•     Naze 32 LED indicator window
•     Naze 32 pre-drilled mounting holes
•     CC3D PDB pre-drilled holes
•     Large airflow slots in motor arms
•     Machined channels in arms for motor wires
•     Pre-drilled Top Cover
•     Central COG with 4S 1800MAh lipo battery
•     The Top Cover can be easily removed and re-fitted with only 4x M3 screws

Specifications:

•     Material                             HDPE
•     Weight                               175g
•     Size                                    280mm PCD
•     Flight Controller                Naze32/cc3d
•     Motor Size                         220X series
•     Maximum battery size       4S 1800Mah

 
* The Lifetime Frame Warranty covers either part of the frame that has been damaged badly enough to render the frame un-flyable. The damaged part/s will be replaced on return of the warranty certificate and the damaged part(s)

Beautifull and yet simple design, attractive in price, appealing look. This is the KINGSTAR 260. This set including 2 frame kits , Grren and Red, together with Leds

Features:

1. Polyamide+fibre material, multicolor、strong、light-weight frame.
2. Standard camera holders, the vertical angle is adjustable.
3. Anti-vibration holders for MOBIUS type camera.
4. Power distribution board  with gold PCB made from 1oz copper thickness.
5. High brightness multicolor rear LED with lampshadehousing
 
Package included:

• 2 x Frame set
• 10 x pairs of 6040 propeller
• 2 x High brightness LED
• 1 x Receiver antenna mount

 Specification:

• Frame distance- 260mm
• Frame weight 138g

 Recommended Configuration:

• FC: CC3D\NAZA32\QQ etc..
• MOTOR:2204-2206
• ESC:10-20A with BLHeli or SimonK firmware.  
• PROPELLER:6"
• BATTERY :1300-2200MHA 11.1V
•          1000-1800MAH 14.8V

260mm KK260 FPV Racer Quadcopter Frame SET

Included

• KK260 Multicopter Frame Kit, Made from Nylon and fiber
• Wheelbase: 260mm
• Weight: 101g
• High strength, light weight
• No electronics included

Required (package not include):

Propeller: 5 - 6 inch
Motor: 1806 /2204/ 2206
Flight controller
Battery: 800 - 1800mAh 3s 4s
Radio

This is the combo version of the Tetras 280 FPV Quadcopter Tilt Racer.

This combo includes the following components of the best quality:

• MSH Tetras 280 FPV Quadcopter Tilt Racer kit with PCB
• 1x Pre-painted Canopy, available in Red, Yellow, Orange or Transparent
• 4x ESCs LittleBee 20A
• 4x 2204-2206 motors (Emax or Cobra)
• 4x High Quality 5x4.5 propellors
• 1x CC3D Flight controller

The FPV Set includes:

• Camera (600-700TVL or similar)
• Video transmitter
• Battery (max 4s 2200mah LiPo)

The Radio set includes:

• RadioLink AT9 with Receiver

Needed to complete:

• Camera (600-700TVL or similar)
• Video transmitter
• Transmitter and Receiver
• Battery (max 4s 2200mah LiPo)

Born from 10 years designing the most advanced RC products, MSH has developed a highly durable, light, and integrated 280 class racing mini FPV quadcopter.  Utilizing MSH's advanced design capabilities with composite plastics and carbon fiber, the Tetras advances the state of the art with this highly integrated platform.

Specifications:

• Size: 280mm
• Battery size:  (up to) 110mm x 40mm (up to 2200Mah 4s)
• Motors:  up to 22xx Propellers 5" - 6"
• Total height: 100mm    
• PCB    
• Front and rear
• RGB leds   
• Flight controller/ESCs connections on PCB   
• Buzzer   
• Camera PCB pads   
• Tx Video PCB pads   
• LC Filters  
• Bec 5V       

Included in the kit:

• Kit Tetras 280   
• PCB   
• Prepainted canopy   

Needed to complete the kit:

• 4 ESCs (LittleBee 20A or OneShot125)
• 4 motors (Xnova 2204-2300kV or similar)
• 5-6" props
• Camera (600-700TVL or similar)
• Video transmitter (from 25mW)
• Receiver
• Flight controller (CC3D, Naze32 rev6, etc...)
• Battery (max 4s 2200mah LiPo)

Available in four colours:

• Red
• Yellow
• Orange
• Transparant

This combo is a perfect Saving package deal. Included:

1 QAV frame 4 Motors Emax 2206-1900
4 Props HQ 6X4.5
4 ESC simonK or Blheli 12 Amps
1 CC3D controller

Carbon Fiber and aluminum anodized RED/SILVER motor mount
Weight:95gr
Fasteners: Stainless Steel
Size: 250mm diagonally