210-245 Kits & combos

Products


  • KingKong 210 Sandwich Frame kit

    KingKong 210 Sandwich Frame kit

    KingKong 210 Sandwich Frame kit

    Specification:

    • Model: 210 Sandwich Frame
    • Size: 210mm
    • Material: Carbon Fiber + Plastic
    • Weight:  149 grams
    • Arm Plate: 3mm
    • PCB: Integrated

    Recommended set-up for KingKong 210 sandwich frame

    • Flight Controller: SP Racing Naze32 Mini | mini F3 Acro
    • ESC: KingKong BLHeli 12A w/ OneShot | FVT LittleBee 20A micro w/ OneShot
    • Motor: 1806 3100kV Brushless
    • Battery: 11.1v 3S 850mAh Lipo Battery /r 4s 850 mAh 70c
    • Camera: 700tvl / 1000tvl
    • VTX: 5.8
    SKU: KK-210SANDWICH-KIT
    €59.00
    inc. VAT

     LOW STOCK
  • KINGKONG 210GT Multicopter FPV Racer Drone PNP Combo with NZ32 Flight Control

    KINGKONG 210GT Multicopter FPV Racer Drone PNP Combo with NZ32 Flight Control

    KINGKONG 210GT Multicopter FPV Racer Drone PNP Combo with NZ32 Flight Control,

    This PNP combo is equipped with naze32 flight control, 4 2205(2-4S) motors, 4 BLHELI ESC 20A(2-4S) , 10pairs of 5040 propellers, video transmitter, mushroom antenna, CCD camera.

    The frame is 3mm full carbon fiber integrated design with light weight and very good strength.

    Package Included:
    1 x 210MM Frame Kit
    4 x 2300KV Motor
    4 x 20A ESC
    20 x 5040 Propeller
    1 x 5.8G VTX
    1 x 700TVL CCD Camera
    1 x SMA RHCP 5.8G Antenna

    Radio and Lipo not included

    SKU: KK-210GT
    €280.00
    inc. VAT

     LOW STOCK
  • LYNX ZAP 210 QUBIC FPV Racer

    LYNX ZAP 210 QUBIC FPV Racer

    LYNX ZAP 210 QUBIC FPV Racer

    The Zap 210 Qubic project it begins as pursuing a result on bring in an Air-frame made for the highest level FPV racing, with standard profile, designed from the ground up which have excellent drag co-efficiency, greatly increase handling and acceleration.

    Well-thought layout is compatible with the latest generation of FPV racing equipment's on the market.  The Qubic Air Frame comes with all precise and lightweight 7075 Aluminum Hardware as a very unique Battery Support as well the Frame Support and also an Aluminum XT60 Clamping system designed to lock the connector on place. Everything has been developed with a progress as a pilot in mind...

    It also provides the most effective way of system for camera setting, adjustment Carbon Aluminum Camera Plate Mount, support 0 to 45 degree up tilted camera mount, compatible with Fat Shark 600-TVL FPV.
    Tuned CMOS Camera such as Run-Cam, Sony HS-1185 CCD 700-TVL FPV Camera Plastic Case and many more ...

    The Qubic reuse the same base Frame of the Zap 210 Zero but have larger between frames spaces for larger electronics or integrated FC / ESC system option..

    While we are experiencing the fun of the high speed crossing of the Zap 210 Qubic, we could not avoid all kinds of crash . We have been heavily testing this design to make sure that what we release really stands up to the hard hits.
    Zap 210 Qubic is equipped with Motor protection Mounts to reduce the damages to the motors when crash, they also work as Landing Gear Skid.

    Conveniently placed break-away antenna mounting options (No more broken SMA's)

    The frame is designed to be the perfect mix of strength and freestyle performance racer, be more agile when doing the 3D rolling.

    Uni-Body Main Frame board made with a strong (2.5 mm) High Density Pure Carbon Fiber Plate.

    FEATURES:

    • Qubic Design: standard profile, larger electronics space option (compared with Zap Zero Design) , ultra-rigid, crash durable, stable and agile.
    • Pure High Density 100% Carbon Fiber Plate 2.5 mm thickness: best compromise weight stiffening andresistance.
    • CNC Ultra-Stiff Hardware Frame Connection 7075 Red Color Anodized.
    • XT60 Aluminum CNC clamp system, with dual (front or back) predisposition holes for easy and convenient personalization use.
    • Almost universal FPV Camera Mount: Tilted Angled 0 / 45 deg, front back 10 mm adjustment, tuned CMOS Camera such as Run-Cam, Sony HS-1185 CCD 700-TVL FPV Camera Plastic Case and many more ...
    • Delrin Black CNC Motor Protection / Landing gear skid functions
    • 5035 Lynx Propeller Set

    TECHNICAL SPECIFICATIONS:

    • Frame Spacer and Support material: Aluminum 7075-T6 – anodized finish
    • Frame Plate material: Pure High Density 100% Carbon Fiber Plate 2.5 mm thickness
    • Top TX HD Support material: Pure High Density 100% Carbon Fiber Plate 2.5 mm thickness
    • Screw material: Carbon steel 12.9 Class

    PACKING LIST:

    • 1 x Zap 210 Qubic  Design Frame (assembly need)
    • Check Extra Pictures or User Manual for detailed parts list.
    • 1 Set 5035 Lynx Propeller

     

     

     

    SKU: LX1910
    €69.00
    inc. VAT

     LOW STOCK
  • Nighthawk 200 All Carbon Fiber Quadcopter Aircraft Frame (3mm)

    Nighthawk 200 All Carbon Fiber Quadcopter Aircraft Frame (3mm)

    EMAX Nighthawk 200 was designed for acrobatic FPV sessions. It supports 5” pros and 220x size motors, proving a strong power for racing. Camera can be mounted on a 20 degree (30 degree for optional) tilt providing better view for FPV racers. With a strong 3mm (4mm for optional) pure carbon fiber unibody main frame and low CG design, it is more durable, stable, and agile

    Features:
    A unibody main frame board made of 4mm/3mm pure carbon fiber to ensure durability.
    Equipped with motor protection mounts to reduce the damages on motors when crash.
    Low battery cabin design to optimize the center of gravity. It makes 3D actions more responsive.
    20 degree/30 degree uptilted camera mount better for FPV racing.
    Coordinated with EMAX top-level power system.

    Wheelbase 210mm

    Weight 97gr

    SKU: EMX-MR-1622
    €59.00
    inc. VAT

     IN STOCK
  • RACE 230 FPV Drone KIT frame Version

    RACE 230 FPV Drone KIT frame Version

    RACE 230 FPV Drone KIT frame Version

    Package included

    • KingKong RACE 230 FPV Drone FRAME kit
    • 2 Set of props
    • Camera Mount
    • PCB
    SKU: KK-230RACE
    €69.00
    inc. VAT

     LOW STOCK
  • RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Blue Yellow Blue

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Blue Yellow Blue

    RaGG-E Curse 5" Virtually Unbreakable HDPE FPV racing frame Blue Yellow Blue

    The Curse was designed after many requests for the 200h frame to be increased to accept 5 inch props, I decided to design a completely new shape to give a little more variety to the range of frames. The frames shape was designed with freestyle in mind. 225mm Airframe has been designed to allow for the install of the connex prosight system and protect the component this is installed with the extra top plate which is included in the price of the frame. With Cam Pods and HD Cam mounts coming this frame is the answer to lots of requests.

    Specifications:

    • This frame is designed for 5" props and upto 22xx size motors
    • RaGG-e WBX5 FPV Quadcopter Frame Specifications:
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:225mm diagonally, 180mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Most standard fitting FC's


    Weights

    • Main Frame: 87g
    • Standard Top Plate:20g
    • Cam Gaurd:7.5g
    • ​12No. Screws:10g
    • 15mm Standoffs:4g
    • Total Weight:125g
    SKU: CURSE-BYB
    €74.00
    inc. VAT

     LOW STOCK
  • RaGG-E WBX5 Quadcopter Racing FPV Airframe Red/Yellow/Red

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Red/Yellow/Red

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Red/Yellow/Red

    Produced by UK company offering state of the art, high quality racing frames. Expertly milled from ultra-tough HDPE, with unique design features that not only catch the eye, but function to reduce overall weight & increase air flow. These units are able to accommodate a multitude of commonly used components, giving you the freedom to build a serious contender for both the racing and freestyle scenes.

    The RaGG-e WBX5 is a 205mm True X-Frame made of HDPE plastic offers the builder various options of component layout, the HDPE offers protection of vital electronic Components. This Durable frame will not let you down when it matters. And with the new colour scheme, Carbon Fibre Plates and 3D printed accossories this frame can be customised and refined down in weight to around the 100g mark making it a real contender in the race and freestyle scene.

    This frame is designed for 5" props and upto 22 size motors

    • RaGG-e WBX5 FPV Quadcopter Frame Specifications
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:205mm diagonally, 145mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Kiss, Naze or CC3D

    Specs

    • Main Frame.......................................82g
    • Top Plate............................................17g
    • Cam Gaurds.......................................12g
    • Spacer Module.....................................8g
    • Bottom Plate......................................15g
    • 12No. Screws.....................................10g
    • 35mm Standoffs...................................5g
    • 25mm Standoffs...................................3g
    • Total Weight....................................152g
    SKU: WBX5-RYR
    €89.00
    inc. VAT

     LOW STOCK
  • RaGG-E WBX5 Quadcopter Racing FPV Airframe Yellow/Purple/Yellow

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Yellow/Purple/Yellow

    RaGG-E WBX5 Quadcopter Racing FPV Airframe Yellow/Purple/Yellow

    Produced by UK company offering state of the art, high quality racing frames. Expertly milled from ultra-tough HDPE, with unique design features that not only catch the eye, but function to reduce overall weight & increase air flow. These units are able to accommodate a multitude of commonly used components, giving you the freedom to build a serious contender for both the racing and freestyle scenes.

    The RaGG-e WBX5 is a 205mm True X-Frame made of HDPE plastic offers the builder various options of component layout, the HDPE offers protection of vital electronic Components. This Durable frame will not let you down when it matters. And with the new colour scheme, Carbon Fibre Plates and 3D printed accossories this frame can be customised and refined down in weight to around the 100g mark making it a real contender in the race and freestyle scene.

    This frame is designed for 5" props and upto 22 size motors

    • RaGG-e WBX5 FPV Quadcopter Frame Specifications
    • Materials: 12.7 HDPE
    • Fasteners: Stainless Steel
    • Size:205mm diagonally, 145mm wide
    • Maximum Propeller: 5"
    • Motor Mount: M3 6mm
    • Flight Controller Mount: Kiss, Naze or CC3D

    Specs

    • Main Frame.......................................82g
    • Top Plate............................................17g
    • Cam Gaurds.......................................12g
    • Spacer Module.....................................8g
    • Bottom Plate......................................15g
    • 12No. Screws.....................................10g
    • 35mm Standoffs...................................5g
    • 25mm Standoffs...................................3g
    • Total Weight....................................152g
    SKU: WBX5-YPY
    €89.00
    inc. VAT

     LOW STOCK
  • RJX CAOS 210 FPV RACER Quadcopter frame Combo

    RJX CAOS 210 FPV RACER Quadcopter frame Combo

    The CAOS 210 Quadcopter Combo including Frame, Electronics, Flight controller, Lipo and optional FPV set.

    Choose you configuration, fpv KIT also availiable as extra

    Features

    • The center of gravity and the propeller of the pneumatic center coincide
    • Using high quality Quick assembling and dismantling nylon fence (Prevent water from splashing and protective equipment)

    Specifications:

    Weight:325g without battery

    Power Requirement: 4S 1300-1500 mAH

    ESC:4S 20A

    Motor size: 2204-2406

    Props:5" RJX Props

    Camera:700-800TVL

    Flight Time: Highly dependent upon battery, and flying style

    Included in the box:

    • 1x RJX Caos 210 FPV  Frame
    • 4x motors 2204 such cobra, or Avizar.
    • 4x ESC 12a Blheli or SimonK
    • 1x CC3D flight controller
    • 2x RJX battery straps
    • 1x mini HUB
    • 4x Damping
    • 1x XT60
    • 4x 5" RJX Prop

    Add FPV kit, including:

    • 700 TVL sony CCD camera
    • Video TX
    • Spyro-cloverleaf antenna for TX
    SKU: RJXC210Com
    €249.00
    inc. VAT

     IN STOCK
  • RJX CAOS 210 FPV RACER Quadcopter frame kit only

    RJX CAOS 210 FPV RACER Quadcopter frame kit only

    The CAOS 210 Quadcopter airframe is a small yet fully functional FPV quad deserving the QAV label. The Caos 210 is a symmetric 215mm size airframe that accommodates 5" props. The 215mm is measured motor shaft to motor shaft diagonally.

    This is a frame kit version, no electronics included.

    Features

    • The center of gravity and the propeller of the pneumatic center coincide
    • Using high quality Quick assembling and dismantling nylon fence (Prevent water from splashing and protective equipment)

    Specifications:

    Weight:325g without battery

    Power Requirement: 4S 1300-1500 mAH

    ESC:4S 20A

    Motor size: 2204-2406

    Props:5" RJX Props

    Camera:700-800TVL

    Flight Time: Highly dependent upon battery, and flying style

    Included in the box:

    • 1x RJX Caos 210 FPV  Frame
    • 2x RJX battery straps
    • 1x mini HUB
    • 4x Damping
    • 1x XT60
    • 4x 5" RJX Prop
    SKU: RJX-C210G
    €90.00
    inc. VAT

     LOW STOCK
  • RKH 135 Quad-X CNC Kit 01 (Red) - RKH 135RQX

    RKH 135 Quad-X CNC Kit 01 (Red) - RKH 135RQX

    Description

    • Designed for building 135 size Quadcopter by yourself (2D or 3D setup). It requires a good knowledge of RC systems, soldering skills and creation of power distribution system.
    • CNC Kit made by aluminum alloy, carbon fiber, delrin material and steel hardware.
    • Optimized for weight and durability.
    • Weight (CNC Kit 01): approx 11.22(g)

    Included:

    • RKH 135 Quad-X CNC Kit 01 (1set).
    SKU: 135RQX980-R
    €39.90
    inc. VAT

     IN STOCK
  • SAM X220 X Race QUADcopter combo SET with electronics

    SAM X220 X Race QUADcopter combo SET with electronics

    This super glossy Sam X220 quadcopter frame is made of coated 3K carbon with chamfered edges in high gloss design.

    **Combo comes with:

    • CC3D controller
    • 4 x esc
    • 4- Motors 2203/2206
    • Props 5"
    • Camera
    • VTX
    • Antenna mushroom
    • Lipo 3s 1400-1550


    **If you wish to modify or build up your combo with certain components- just contact us. WE promise to respond within Hour( in working hours)

    Thanks to specific design the color is deeply inside carbon, and gives you stunning looking frame.

    Colors availiable: (see options) and other images to understand the colors

    • Transparent Carbon with Blue
    • Transparent Carbon with Red
    • Transparent Carbon with Green
    • Lamborghini Green(not transparent)

    Flexible operational
    This process is mirrored after what is called a honeycomb, and is used in many strength applications like airplane wings for ultra-light weight and strength, other frames are made of some carbon fiber and a glue type filler which does not allow for vibration dampening or flex.

    Features                                    

    • Internal layer design,coating on surface like mirror,lighter weight,high strength                                    
    • camera bolts to the side plate no gap                                    
    • YFS screws,hardness is level 12.9 of Gold screw with screw gasket                                    
    • Arbitrary Angle adjustment,Seamless docking,highly rotating tension,no loose, Translation: this baby will take a hit!                                    

    This special process, frame performance will Absorb the propeller and motor vibrations.             

    • Weight of Frame 64-66 Gr     
    • Frame Size : 220mm
    • Lower frame 4mm 3k carbon
    • made for Props of 5"

     

    SKU: SAM220COM
    €259.00
    inc. VAT

     IN STOCK
  • SAM X220 X Race QUADcopter Frame Carbon with transparent effect color

    SAM X220 X Race QUADcopter Frame Carbon with transparent effect color

    This super glossy Sam X220 quadcopter frame is made of coated 3K carbon with chamfered edges in high gloss design, hand crafted.

    Thanks to specific design the color is deeply inside carbon, and gives you stunning looking frame.

    Colors availiable: (see options) and other images to understand the colors

    • Transparent Carbon with Blue
    • Transparent Carbon with Red
    • Transparent Carbon with Green
    • Lamborghini Green(not transparent)

    Flexible operational
    This process is mirrored after what is called a honeycomb, and is used in many strength applications like airplane wings for ultra-light weight and strength, other frames are made of some carbon fiber and a glue type filler which does not allow for vibration dampening or flex.

    Features                                    

    • Internal layer design,coating on surface like mirror,lighter weight,high strength                                    
    • camera bolts to the side plate no gap                                    
    • YFS screws,hardness is level 12.9 of Gold screw with screw gasket                                    
    • Arbitrary Angle adjustment,Seamless docking,highly rotating tension,no loose, Translation: this baby will take a hit!                                    

    This special process, frame performance will Absorb the propeller and motor vibrations.             

    • Weight of Frame 64-66 Gr     
    • Frame Size : 220mm
    • Lower frame 4mm 3k carbon
    • made for Props of 5"

     

    SKU: SAM220R
    €59.90
    inc. VAT

     IN STOCK
  • Shendrones CORGI 220 Quadcopter (Frame Kit)

    Shendrones CORGI 220 Quadcopter (Frame Kit)

    Corgi is a 220mm 5" quad designed to carry the GoPro Session.
    Win races with Krieger and Mixuko, but use Corgi to record sweet HD footage and get accolades and sponsors.

    The included 3d printed Ninja Flex camera holders keep the Session safe inside the frame, but loosen two screws and they rotate up for easy access. The mounts are printed by Twisted Quads, and they carry TQ's no BS promise: if you somehow manage to break it, send them a photo and pay shipping for a replacement.

    Weight is as centralized as possible, with the Session and battery right on the prop line and next to each other.

    With the pdb and fc down between the lower plates, Corgi is a challenging build, definitely not for the first timer.

    Frame weight 147g.

    SKU: CORGI
    €59.00
    inc. VAT

     LOW STOCK
  • Sky hero Anakin Club FPV racer 215-5’’ ARF combo w.radio

    Sky hero Anakin Club FPV racer 215-5’’ ARF combo w.radio

    Sky hero Anakin Club FPV racer 215mm -5"’’ ARF combo, Our combo delivered with Best components we beleive are on the market today. We beleive that quality assembly can be done by customer, there are a lot of advantages to do so.
    See the specs below.

    •     Anakin club racer Frame kit Xnova 2204-2300Kv motors, esc, props- factory preinstalled
    •     CC3D controller included
    •     PDB-Bec
    •     FPV Camera included
    •     VTX - optional
    •     RADIO link AT9 with receiver Sky hero version (white edition )

    Not included:

    • Lipo charger
    • Battery 3s 1300-1500 mah

    Sky hero did it again, with the latest drone technology, you have the possibility to fly the savourthe freedom of birds.
    With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
    Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
    Strenghtened with flat arms.
    this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.
    Locked in trajectories and customizable.

    General specs of Club racer versions.

    • Full carbon frame- Crash resistant.
    • Innovative abutted A frame design.
    • Minimised vibrations distribitution, Optimised shock absoption
    • 3K 4mm Carbon
    • Sandwitched frame plates
    • Fully protected electronics
    • Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
    • Responsiveness- so rigid, that you feeel "At one" with your frame.

    ESSENTIALS

    •     Entirely designed for racing
    •     Flat arms conception for highest impact resistance
    •     Simplified option for easy components replacement
    •     Low drag, for higher speeds
    •     Electronics fully protected

    KEY FACTORS

    •     Premium choice for FPV
    •     High wind resistance
    •     Super fast
    SKU: CR215ARF
    €299.00
    inc. VAT

     IN STOCK
  • Sky hero Anakin Club FPV racer 215-5’’ ARF xnova MOTORS

    Sky hero Anakin Club FPV racer 215-5’’ ARF xnova MOTORS

    Sky hero Anakin Club FPV racer 215-5’’ ARF xnova 2204 MOTORS

    The COMBO version of the small Club Racer allows a total freedom in choosing the right components according to your usage.

    Sky hero did it again, with the latest drone technology, you have the possibility to fly the savourthe freedom of birds.
    With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
    Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
    Strenghtened with flat arms.
    this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.

    Kit specifications:

    •         Complete frame ASSEMBLED
    •         Motors & Esc’s XNOVA 2204-2300
    •         ESC's one shot
    •         Flight controller  CC3D
    •         Camera- 700 TVL with OSD
    •         RADIO TX :OPTIONAL
    •         Battery & charger : Optional ( Sky hero 3s lipo 60c)

    General specs of Club racer versions.

    •     Full carbon frame- Crash resistant.
    •     Innovative abutted A frame design.
    •     Minimised vibrations distribitution, Optimised shock absoption
    •     3K 4mm Carbon
    •     Sandwitched frame plates

        Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
        Responsiveness- so rigid, that you feeel "At one" with your frame.

    ESSENTIALS

    •         Entirely designed for racing
    •         Flat arms conception for highest impact resistance
    •         Simplified option for easy components replacement
    •         Low drag, for higher speeds
    •         Electronics fully protected

    KEY FACTORS

    •         Premium choice for FPV
    •         High wind resistance
    •         Super fast
    SKU: SKH00-215-ARF-xn
    €189.00
    inc. VAT

     IN STOCK
  • Sky hero Anakin Club FPV racer 260-6’’ KIT NAKED frame

    Sky hero Anakin Club FPV racer 260-6’’ KIT NAKED frame

    Sky hero Anakin Club FPV racer 260-6’’ KIT NAKED frame

    Sky hero did it again, with the latest drone technology, you have the possibility to fly the savourthe freedom of birds.
    With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
    Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
    Strenghtened with flat arms.
    this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.

    Kit specifications:

    •     Naked frame- NO Electronics

    General specs of Club racer versions.

    • Full carbon frame- Crash resistant.
    • Innovative abutted A frame design.
    • Minimised vibrations distribitution, Optimised shock absoption
    • 3K 4mm Carbon
    • Sandwitched frame plates
    • Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
    • Responsiveness- so rigid, that you feeel "At one" with your frame.

    ESSENTIALS

    •     Entirely designed for racing
    •     Flat arms conception for highest impact resistance
    •     Simplified option for easy components replacement
    •     Low drag, for higher speeds
    •     Electronics fully protected

    KEY FACTORS

    •     Premium choice for FPV
    •     High wind resistance
    •     Super fast
    SKU: SKH00-260-KIT
    €79.00
    inc. VAT

     LOW STOCK
  • Sky-Hero Anakin Club Racer 215 - 5’’ NAKED FRAME kit only

    Sky-Hero Anakin Club Racer 215 - 5’’ NAKED FRAME kit only

    Sky-Hero Anakin Club Racer 215 - 5’’ NAKED FRAME kit only

    The Kit version of the small Club Racer allows a total freedom in choosing the right components according to your usage.

    Sky hero did it again, with the latest drone technology, you have the possibility to fly the savourthe freedom of birds.
    With competition racing and performance within the DNA of SKY HERO, this machine was created as serious racer for those who want the best.
    Club-racer- inherits the amazing design of the original sky hero Anakin, with new evolved concept.
    Strenghtened with flat arms.
    this was developed with the vision that FPV racers deserve a newar-indestructable machine, agile racer they can trust.
    Locked in trajectories and customizable.

    Kit specifications:

    •     Complete frame unassembled
    •     Motors & Esc’s not included
    •     Flight controller not included
    •     Tx & Rx (Radio) not included
    •     Camera & VTX (video transmitter) not included
    •     Battery & charger not included

    General specs of Club racer versions.

     

    • Full carbon frame- Crash resistant.
    • Innovative abutted A frame design.
    • Minimised vibrations distribitution, Optimised shock absoption
    • 3K 4mm Carbon
    • Sandwitched frame plates

     

    • Fully protected electronics
    • Optimised Shape, size and frame thickness, delivering outstanding strength-to weight ratio
    • Responsiveness- so rigid, that you feeel "At one" with your frame.

    ESSENTIALS

    •     Entirely designed for racing
    •     Flat arms conception for highest impact resistance
    •     Simplified option for easy components replacement
    •     Low drag, for higher speeds
    •     Electronics fully protected

    KEY FACTORS

    •     Premium choice for FPV
    •     High wind resistance
    •     Super fast
    SKU: SKH00-215
    €79.00
    inc. VAT

     IN STOCK
  • Sky-Hero OB1 COMBO 6" (Dia.240mm)

    Sky-Hero OB1 COMBO 6" (Dia.240mm)

    Sky-Hero OB1 COMBO 6" (Dia.240mm)

    OB1 features:

    Lighter
    Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
    The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
    When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

    Faster

    The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

    Stronger
    The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

    Others:

    • The 15°>70° adjustable camera angle caters for different pilot profiles.
    • The flexible ESC location (over or under arms) providing a tuned frame for every FPV

    Racer's needs:

    • Free 3D Printable Spare Parts by visiting thingiverse.com  / SkyHero3D
    • Lipo 3 to 4S 1300mAh > 1800mAh
    • Camera 600TVL
    • VTX 25mw

    What's included?

    • Cables protection Club Racer (4pc)
    • Main frame set OB1
    • Side frame OB1
    • Front Arm OB1
    • Rear Arm OB1
    • Aluminium Spacers
    • Screw Set OB1
    • XNova Motor 2204-2300Kv x 4
    • OneShot125 20A x 4
    • Bullnose Props 2 blades 6x4.5
    • CC3D Atom
    • PDB: MPDB5V12V

    Note that the canopy is not included!

     

    SKU: SKH00-OB1-61
    €199.00
    inc. VAT

     LOW STOCK
  • Sky-Hero OB1 Nacked frame 6" (Dia.240mm)

    Sky-Hero OB1 Nacked frame 6" (Dia.240mm)

    Sky-Hero OB1 Nacked frame 6" (Dia.240mm)

    OB1 features:

    Lighter
    Diring the disign process, Shy-Hero has used every opportunity to minimise, whilst ensuring that they didn't compromise the strength of the frame.
    The OB1 can be assembled in two configurations: "Stripped Down" (103g) and "Fully Loaded" (73g).
    When it's assembled in the "Stripped Down" confugarion, there is a saving weight of more than 30 grams!

    Faster

    The streamlined "long shape" design allows faster rolls with much more stable pitch, thereby dramatically increasing cornering speed, whilst the low drag coefficient makes it even faster on the straights. Race winnig features that allow you to out-maneuver your opponents and gain the advantage.

    Stronger
    The "single piece" arms based on a full 3K 4mm carbon frame have been cut to respect the CF weave structure and combined with the most impact resistant vertical side plate design, you get great rigidity, strenght and protection for key companents.

    Others:

    • The 15°>70° adjustable camera angle caters for different pilot profiles.
    • The flexible ESC location (over or under arms) providing a tuned frame for every FPV

    Racer's needs:

    • Free 3D Printable Spare Parts:
    • Customize your OB1 for free by visiting thingiverse.com  / SkyHero3D

    What's included?

    • Cables protection Club Racer (4pc)
    • Main frame set OB1
    • Side frame OB1
    • Front Arm OB1
    • Rear Arm OB1
    • Aluminium Spacers
    • Screw Set OB1

    Note that the canopy is not included!

     

    SKU: SKH00-OB1-6
    €69.00
    inc. VAT

     IN STOCK

Manufacturers

Back