Aluminum CNC XL Heatsink with (10mm Fan) For Kontronik ESC
Specially made for Quads/Multicopters, 50A Opto Programmable Brushless Speed Controller, 400Hz
Dimensions W*L*H:28 x 59 x 10(mm)- Fits 30mm tubes
Servo wire and Battery wires are 30cm long for easy installation.
Apply for RCE-BL60G/70G/75G/100G Brushless ESC. ●High efficiency large surface area heatsink for ESC, to improve motor and BEC maximum output current by 15%. Specification: ●ESC cooler plate x 1(48x31x16mm) ●Heat shrink tube x 2(Φ28x10mm) ●Weight:15.4g
Castle Creations 10A BEC Switching Regulator
Castle Creations Link Quick Connect
Experienced modelers go to great pains to tie down their servo and throttle leads, and some find unplugging a Castle controller from the receiver disrupts all their work.
The Quick Connect is recommended for the following ESCs:
Castle Creations Phoenix Edge HV 120 ESC 120A 12S 50V
This is the Castle Creations Phoenix Edge HV 160 50V 160-Amp ESC. The next evolution in speed controller technology has arrived With the debut of the Phoenix Edge series ESC's. The Edge series features a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.
Connectors: Battery and motor connectors sold separately
Castle Creations Talon HV120 ESC 010-0131-00
The Biggest BEC on the Block..........Talon HV120 010-0131-00
Talon HV120 has the power in all the right places, and the looks to match. The first high voltage controller to come out of the Castle factory with a built in BEC deserves nothing but the biggest BEC we could muster. No more reaching for an external BEC or messing with extra wiring. At the heart of this powerhouse sits a 20A peak ** BEC with selectable 6v or 8v output voltage. With a voltage input range from 3S to 12S LiPo, and a 120A* continuous amperage capability, it’s capable of up to 6000W of continuous power for a wide variety of heli and fixed wing applications. Its sleek aluminum case not only ensures your Talon HV stays cool during high power demand situations, but also looks the part while doing it. For those seeking optimum cooling performance, we are offering a 40mm fan accessory, it is recommended for set ups with low airflow, such as under canopies or in a fuselage. Talon HV users will have access to our industry leading software functions and USB programming capability via Castle Link USB adapter***.
*RC HOBBY APPLICATION RATING: 120 amps for the duration of a single 10,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full- throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.
** Peak indicates a current level sustainable for the duration of a typical servo’s transient current loads. Your setup may vary. Always confirm servo current draw before the first flight of the model.
*** Remove BEC Power wire from receiver before connecting to Castle Link.
BEC Specifications 10A continuous, 20A Peak**, user selectable 5.5mm male bullets included, battery connector sold separately
This is the Castle Creations "Air" Field Link Programmer. The AIR Field Link is compatible with nearly all Phoenix, Phoenix HV, ICE, ICE HV and Thunderbird controllers as well as CC BEC and CC BEC PRO BECs. Sometimes you need to make a change in the programming of a Castle controller and you just don't happen to have a laptop in your man purse. What to do? There's always the old stick programming method that we all love to hate. Yes it works, but...there has to be a better way. Now there is Field Link! Field Link allows you to modify the most commonly used settings in your Castle controller all at the touch of a single button. No computer needed (mostly). Simply connect the Field Link to the throttle lead of the controller and power the pair as described below. Click the button to scroll through and change the indicated settings. It doesnt get any easier! This card is also a Castle Link that allows access to the entire world of Castle tuning functionality.
Does it work without a computer or not?
Note: Field Link Card is capable of changing the following settings, however, the card cannot change settings on controller series that do not have these settings.
Castle Link Quick Connect Duo 010-0149-00 Experienced modelers go to great pains to tie down their servo and throttle leads, and some find unplugging a Castle controller from the receiver disrupts all their work. Many have asked for something like a Y connector that gives an open lead for easy Castle linking, but a traditional Y harness doesn't work when the other branch of the Y is connected to a receiver, the signal line must be disconnected from the receiver. Castle Quick Connect and Quick Connect Duo do just that. They detect the presence of a Castle Link adapter on the free lead and switch the controller's signal line from the receiver to the Castle Link. Easy as that. The Quick Connect Duo supports all Castle Link capable ESCs but is designed specifically for use with Castle ESCs featuring AUX wire technology.
Note: Neither Quick Connect, nor Quick Connect Duo will work with the Field Programming Cards when used as a standalone programmer. It will ONLY work when using the Field Programming Card as a Castle Link adapter. Quick
Connect Duo Wiring Instructions:
Castle Phoenix Edge 50 34V 50-Amp ESC w/5-Amp BEC 010-0102-00
Helis: 450 class
Size and Weight
Castle's Talon 90 ESC with heavy duty BEC is designed for today's servos - producing 9 amps of continuous power and its potential power peaking* at 20 amps! Fixed wing - applications drawing up to 90 amps continuously on 6S. BEC is capable of powering most servo sets in planes - Talon 90 is ideal for our 30cc planes! The innovative case ensures cooling in even the toughest mounting locations.
With Scorpion ESC Programmer, this Commander V link cable will allow you to keep your Commander V 50V series ESC in most update version.
Electric Cooling Fan for Speed Controller 40 mm
Electric Cooling Fan for Speed Controller 50 mm
EMax BLHeli Series 12A ESC for Multicopters (ONESHOT Available) .Based on BLHeli firmware, further optimized to the perfect drive performance. Low-voltage protection, over-heat protection and throttle signal loss protection. Separate power supply for MCU and BEC, enhancing the ESC’s ability of eliminating magnetic interference.
Emax 12a ESC SimonK Series Speed Controller Perfect for the 250 and 300 Size Fpv Racers. Superb esc that provides lightning fast throttle response which is ideally suited to the FPV Racing Quadcopters. The perfect ESC for your 250 quad race project.
The Lipo-Batteries from EPS E Propulsion Systems are made by the company EURL Breizh Modélisme, a company located in France.
ESC YGE-160 with heat sink, with governor adapter.
with heat sink, with governor adapter Ready to use with VBar-Governor!
Hobbywing Brushless RPM Sensor For High-Voltage ESC / V Bar HM-CGQ
1000rpm to 300000rpm RPM Sensor For Hobbywing High-Voltage ESC also used as an RPM sensor for Flybarless units
RPM Sensor For Hobbywing High-Voltage ESC
It detects the voltage changes at the wires of brushless motor, and then outputs the RPM signal. This RPM sensor can work with some speed control systems for helicopters. And one of its typical applications is to work as the RPM sensor for V-Bar system made by Mikado.
HOBBYWING FLYFUN 130A HV OPTO V5 SPEED CONTROL
● DEO Technology / Active Freewheeling: the DEO technology (Driving Efficiency Optimization) implemented in the ESC has multiple advantages:
● Soft Start-ups & Reverse Brake
● BEC - This version has no BEC use seperate Rx battery
● Multiple Protections
● New Design & Great performance
● Multiple Programmable Parameters
● Continuous/peak current: 130A / 160A
HobbyWing Flyfun Brushless ESC 40A-OPTO (Version 4.1)
Hobbywing FlyFun V5 40A ESC 3-6s BEC
Copyright © 2000-2019 eRCMarket. All Rights Reserved.