Avizar motors

Products


  • Avizar Multicopter Motor MC2834-1100KV, fits 400-450 size models, 4-6S

    Avizar Multicopter Motor MC2834-1100KV, fits 400-450 size models, 4-6S

    MC2834-1100kv is a high torque motor especially developed for the 450 CLASS  Multi-rotors platforms 

    Note- for those who want to fly Acrobatic Quads, or Speed model: 6S configuration with  7-9" prop, you will get a LOT of speed, up to 140 km/h. we recommend it only for those who experienced in FPV or Quads flying.

    Fits Spyder Little, F550, and many others.

    The big advantage that it can be used with 8-10" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    2- Heat, 25% lower heat generation thanks to ceramic bearings.

    3- Japanese NMB bearings, highest resistance to vibrations.

    4- 40cm cables, will allow direct connection to esc, wherever located.

    Specifications:

    •   No-load speed: 1100KV
    •   Load current: 22 Amps
    •   No load current: 0.8 Amps
    •   Long cables (40cm)
    •   Japan NMB bearings
    •   Weight: 81gr
    •   Motor Diameter :28.5 mm
    •   Recommended Battery: 4-6S
    •   Propellers to use: from 8-10"

      Included:

      MC2834 motor, 40cm wires
      Propeller mount with screws, Nut and Cup.

    Example test data

    Voltage (V) Prop (inch) Load current(A) Power(W) Thrust(G) Efficiency (G/W)
        11.1V      10*6          19,8    219,78    1000          4,55

     

    SKU: MC2834-1100
    €29.00
    inc. VAT

     IN STOCK
  • Avizar Multicopter Motor MC3525-930KV, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC3525-930KV, fits 400-500 size models, 4-6S

    New version availiable,. replacing this 930KV, improoved stator, better performance.
    Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S Will be delivered instead.

    SKU: MC3525-930
    €29.00
    inc. VAT

  • Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S

    Avizar Multicopter Motor MC3525-950KV V2, fits 400-500 size models, 4-6S

    MC3525-950KV is a high torque motor especially developed for the 450-500 CLASS  Multi-rotors platforms THIS Motor is a tuning V2 version for the older motor 3525-930kv

    Fits Spyder Little, F550, and many others.

    As advantage that it can be used with 9-11" props and with 4-6 S lipo, allowing you best flexible fit to multiple power combinations.

    So what is so special in this motor:

    - Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    - Heat, 25% lower heat generation thanks to Japanese NMB bearings, resistant to vibrations.

    Specifications:

    •   No-load speed: 950 KV
    •   Load current: 22 Amps
    •   Max Watts : 325
    •   No load current: 0.8 Amps
    •   Japan NMB bearings
    •   Weight: 60gr
    •   Motor Diameter :35 mm
    •   Recommended Battery: 4-6 S
    •   Propellers to use: from 9-11"

    Included:

    •   MC3525 motor
    •   Propeller mount with screws, Nut and Cup.

    Sample testing data is below.

    Volts-14.8  4S Amps Watts Torque-gr
    Prop- Graupner 10x5 1 13 120 gr
      4 57 395 gr
      10 143 850 gr
      16 230 1200 gr
    Volts-14.8 4S Amps Watts Torque
    Prop- Graupner 11x5 1 13 143 gr
      4 57 410 gr
      10 143 930 gr
      16 230 1350 gr
    SKU: MC3525-950
    €29.00
    inc. VAT

     IN STOCK
  • Avizar Multicopter Pancake Motor MC4014-330KV

    Avizar Multicopter Pancake Motor MC4014-330KV

    Avizar MC4014 Brushless MultiRotor Motor 330kv, Specially made for Monster quads, for 6S setups.

    Very high quality super smooth running motors, designed specifically for multirotor use. You can feel the difference just by turning them, and hear the difference on the run!  

    This motor has been custom designed in Europe, and tested during 2 years, and found to be the most efficient for most multi-copters from 700cm and up, due its features.

    So what is so special in this motor:

    1- Dynamic balance, very few motors are really dynamically balanced. the equipment is very unique, and we do insist on the fact and also costs involved that the motor should be balanced, otherwise the fatal vibration will kill the machine sooner or later

    2- Heat, 25% lower heat generation thanks to ceramic bearings.

    3- Ceramic hybrid bearings, and the motor has 3 of them: Radial forces of motor taken away with the help of those special bearings, which also self lubricated,the smoothness of the motor felt directly with the throttle reaction.

    4- Special size and low profile of cage and motor shaft will allow perfect setup and perfect performance on any setup, single or coaxial.

    Features:

    • Sealed Japanese Ceramic Hybrid bearings
    • Short, hardened Japanese steel shaft
    • 0.2mm NdFeB stator plates
    • Includes 6mm, prop adapter, and mounting plate
    • Oversized motor wires 3.3mm, silicone, for long and safe mounting.

    Specifications:

    •   Model: MC4014-330KV
    •   Config: 18N24P
    •   Motor size: 44.8L x 34.5 mm
    •   Weight: 149g
    •   KV(rpm/v): 330
    •   Max Power Continuous: 750W
    •   Max Current: 25A
    •   Max Efficiency Current: 3 - 10A >84%
    •   Battery: 4 - 8s LiPo, optimal for 6S
    •   Prop: 13"- 18"
    •   Internal resistance :85mohm

    Included:

    • Motor with 60cm wires x1
    • Prop adaptor for normal prop with 8mm shaft x1
    • Prop adaptor for Flat props x 1
    • Prop adaptor Screws.
    SKU: MC4014-330
    €79.00
    inc. VAT

     IN STOCK
  • Avizar X3 470KV Multi-Rotor Brushless Motor

    Avizar X3 470KV Multi-Rotor Brushless Motor

    Multirotors are used in many projects. because of High demands, longer flying times, heaver loads and Extreme climate conditions, there is a growing demand for Higher quality motors.
    Delivering best demands, designed for Water proof and dust resistance, X3 motors give you more value.

    X3 motor delivered in Black coating Matt finish, it fits 35mm motor mounts.
    Delivered with original Japanese bearings, Dynamically balanced for Zero vibrations.

    Fits 4-8S lipos, tested with props 12-14"( see table below)

    Delivered with Standard shaft adapter for Conventional props and Flat adapter for Flat props.

    Specifications:
     

    • KV :470
    • Config: 12N14P
    • Shaft Diameter: 4mm
    • Motor Dimension :34.8х34.2
    • Weight : 120g
    • Current Idle :0.5A
    • No.of Cells: 4-8S Lipo
    • Continuous current(A) 180S :25A max
    • Continuous Power(W)180S :450W max
    • Max. efficiency current: (6-15A)>85%
    • Internal resistance :170mΩ

    SKU: MCX3-470KV
    €49.90
    inc. VAT

     IN STOCK

Manufacturers

Back