Alloy Hub Jet Wheel 58mm Diameter: 58mm Tyre height: 20mm Axel Size: 5mm Wheel comes with 2 brass fittings to hold the wheel onto the axel and allow for free spin. Well crafted and precise wheels
Alloy Hub Jet Wheel 63mm Diameter: 63mm Tyre height: 20mm Axel Size: 5mm Wheel comes with 2 brass fittings to hold the wheel onto the axel and allow for free spin. Well crafted and precise wheels.
These are the strongest and lightest control horns available in the world. The dimension given, is the distance from the base of the horn, up to where the thread starts Available sizes are 1/2" , 3/4" and 1" Pack include 2 pieces and hardware
The high quality and performance of AXI 22xx V2 motors meant that they were a perfect base for development of the new AXI 2220/xx GOLD LINE. New small and powerfull motor AXI 2220/16 GOLD LINE V2 with rotating case is suitable for aerobatic models up to 800g and for light sailplanes up to 1000g. Hardened steel Shaft have 4mm diameter and is supported by two large ball bearings wich ensure very good mechanical stability.
Thanks to using newest materials this motors achieve in their weight category extremely high efficiency and high load possibility. AXI GOLD LINE V2 with the high quality of manufacturing, reliability and performance are the best outrunners available in the market. Delivered without prop. holder and Radial mount set!
Carbon fiber ball joint adapter M2,5 for carbon tube 4x2.5mm
Specifications:
CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 4x2.5mm), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 4x2.5mm eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
The CFRP ball joint adapter can be painted easily.
Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
The result is a high strength component, which does not bear comparison with Duralaluminium.
However, it is lighter and vibration resistant.
All CFRP components are manufactured in Germany using the latest CNC machines.
Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm
Specifications:
Carbon fiber ball joint adapter M3 for carbon tupe 5x3mm
CFRP ball joint adapter for carbon tube 5x3 with built-M3 threaded rod M3x20 (Mounting example ball joint - Servo fork lever - CFK pipe 5x3), the connection can now Ruderhebel be produced quickly and safely to the servo arm.
Our CFRP ball joint adapter with fixed injected M3 threaded rod M3x20 (only 1.3 g) can be easily 3x5 eg Pattex Classic stick liquid with some 5min epoxy or viscous second liver on cut to length carbon fiber tube.
The mounted CFRP ball joint adapter effectively prevents the cracking of the carbon tubes. The resulting compound servo - control stick is not only light and sturdy, but is prevented by its low mass premature wear of the power transmission.
The threaded rods M3x20 be prepared in CNC machines from a quenched and tempered steel and then precisely polished finished.
A deviation of M3 thread as is common with many M3 meter rods and represents a major uncertainty is ruled out with our pole construction.
In each pack (4 pieces) we attach a special key which is to facilitate the installation and fine tuning of the ball joints in the model.
The CFRP ball joint adapter can be painted easily.
Our adapters are made of highly compressed carbon fiber plastic ago (nylon with 45% carbon fiber content).
At 300 ° C and under high pressure (1800 bar), the caps get their appearance in hardened steel molds.
Since this method has similarities to the manufacture of highly stressed components in large aircraft, we have taken it for making our threaded caps.
The result is a high strength component, which does not bear comparison with Duralaluminium.
However, it is lighter and vibration resistant.
All CFRP components are manufactured in Germany using the latest CNC machines.
Electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that are designed to accept 10mm wire legs and is suitable for models with a maximum weight of 20kg.
These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.
Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.
This electric retract range is designed to keep retract installations simple and reliable with great value for money. The electric retracts remove all the hassle normally associated with air retract plumbing or getting a mechanical linkage to fit exactly. The retract set includes two retract units that have pre-installed 5mm diameter studs for use with oleo legs and is suitable for models with a maximum weight of 10kg.
These retracts can be used in both electric and engine powered models. They are designed to primarily use the power supplied through the receiver. This can come from the battery in the case of engine models, or a BEC system in electric models. If you use heavier wheels/legs or have lots of drag on the leg doors, then current consumption is increased. If you have any doubt of the power available then you can use a separate battery supply for the retracts using one of the special 'Y' leads.
Each unit has built-in over-current protection. If the leg is stopped in any way during movement, or the load is too high to protect the retract from damaging or drawing too much current.
Specifications:
Leg Wire: 5mm
Max Weight: 10Kg
MountPlate: 44 x 51
Stall Current: 2.1 to 3A
Weight: 92g
Voltage: 4.8 - 7.4v
Dimensions: 92 x51 x 31
Gear Type: metal
Torque: 15.50 kg/cm-4.8v
Torque: 20.60 kg/cm-7.4v
Speed: 6.00 secs-4.8v
Speed: 4.00 secs-7.0v
Type: digital
