Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

+32-486-808080 Contact Us

ERC Latest



01-04-2017: New Whoop frames arrived, upgrade your inductix, also WBX frames from Ragg-e in stock now!


29-07-2016: Check out the new MSH Protos 380, it just came in! We have its spare-parts defined HERE.


20-07-2016: Want to race crash proof with your Graupner Racing Gate? You can now, because our graupner tape is back in stock!


16-07-2016: Want to cruise through the city in style? Check out our new added electric scooters!


15-07-2016: Are you ready for the FPV racing season? Purchase our custom designed Flag, Archer Gate and Ring Gate and make an awesome circuit!


13-07-2016: Problems with fitting a camera on your FPV racer? Too big? Check out the new Runcam Swift now!


  • New Arrivals

  • On sale

More...
  • YGE 205 HVT brushless controller with telemetry

    YGE 205 HVT brushless controller with telemetry

    YGE 205 HVT brushless controller with telemetry

    The -T- in the name of the YGE-205HVT stands for Telemetry. Currently the following protocols are supported:

    • Graupner HoTT V4
    • Jeti ExBUS
    • Multiplex Sensor BUS V2

    Own YGE protocol for further telemetry connections via e.g. S32 (new jlog of R² prototyping). Further protocols are in preparation.

    Due to the optional USB adapter, the 200HVT can be varied and new updates can be added. During operation, the PWM frequency is always automatically adjusted to the needs of the engine and is thus always optimal. Due to the new sine start-up of the 200HVT, the startup behavior is now also SUPERSANFT.

    Description:

    • The specified current is the maximum continuous full gas flow with good cooling.
    • 4 to 14S LiPo, undervoltage reset or shutdown.
    • BEC - undervoltage detection can be switched off.
    • current limit
    • Undervoltage detection can be switched off
    • Speed ​​control (governor mode).
    • Soft start.
    • Active freewheel, thus unlimited part-load.
    • Automatic timing, or adjustable in 6 levels.
    • EMK brake adjustable.
    • F3A / Acro brake (brake intensity steplessly adjustable in flight).
    • Min and Max values ​​are logged and can be displayed in the optional PC tool after the flight (for example, power)
    • Speed ​​limit: 240,000 rpm (2-pole)
    • Overtemperature / overload warning
    • Anti-glare: reduces the start-up spark.
    • Basic programming via mode setup.

    Fine adjustment and choice of telemetry protocol via PC setup, suitable USB adapter is optionally available.

    Technical data:

    • Manufacturer / Importer     YGE
    • Number of cells LiPo     4 - 12
    • Number of cells LiFe     5 - 14
    • Max. permanent current [A]     205
    • Opto coupler     ja
    • Drehzahlsensorausgang     ja
    • Brake     ja, abschaltbar
    • RPM limit     240.000 rpm (2-Poler)
    • Heli mode (gov mode)     ja
    • Anti spark     ja
    • Programmable     ja
    • Dimensions approx. [mm]     89 x 52 x 28
    • Weight [g]     189

    SKU: YGE205HTV
    €429.00
    inc. VAT

     LOW STOCK
  • YGE 120HVT Opto brushless controller with telemetry

    YGE 120HVT Opto brushless controller with telemetry

    YGE 120 HVT brushless controller with telemetry

    Brushless controller YGE 120 HVT Opto with telemetry
    The -T- in the name of the YGE-120HVT stands for Telemetry. Currently the following protocols are supported:

    • Graupner HoTT V4
    • Jeti ExBUS
    • Multiplex Sensor BUS V2

    Hown YGE protocol for further telemetry connections via e.g. S32 (new jlog of R² prototyping). Further protocols are in preparation.

    Due to the optional USB adapter, the 120HVT can be varied and new updates can be added. During operation, the PWM frequency is always automatically adjusted to the needs of the engine and is thus always optimal. Due to the new sine start-up of the 120HVT, the startup behavior is now also SUPERSANFT.

    Description:

    • The specified current is the maximum continuous full gas flow with good cooling.
    • 4 to 14S LiPo, undervoltage reset or shutdown.
    • BEC - undervoltage detection can be switched off.
    • current limit
    • Undervoltage detection can be switched off
    • Speed ​​control (governor mode).
    • Soft start.
    • Active freewheel, thus unlimited part-load.
    • Automatic timing, or adjustable in 6 levels.
    • EMK brake adjustable.
    • F3A / Acro brake (brake intensity steplessly adjustable in flight).
    • Min and Max values ​​are logged and can be displayed in the optional PC tool after the flight (for example, power)
    • Speed ​​limit: 240,000 rpm (2-pole)
    • Overtemperature / overload warning
    • Anti-glare: reduces the start-up spark.
    • Basic programming via mode setup.
    • Fine adjustment and choice of telemetry protocol via PC setup, suitable USB adapter is optionally available.

    SKU: YGE120HVT
    €329.00
    inc. VAT

     LOW STOCK
  • Intelligent Navigation LED Light for Fixed/ FPV Racing quadcopter

    Intelligent Navigation LED Light for Fixed/ FPV Racing quadcopter

    This navigation light is widely used and can be used in any model of sea and land using PWM signal.
     
    2. This navigation lamp can be used for racing quad footpad, perfect in place of sponge MATS, with special materials, anti-cracking and toughness. Please treat customers differently. Because of the design of the divergent lamp shade, the player can feel the attitude of flight in multiple angles.

    3. there are six functions to choose from, convenient and practical.
     
    4. When operating model equipment, the light of the associated rudder will be activated when the control is not affected.
     
    5. The equipment supports 2-6s voltage input.
     
    6. The navigation lamp control panel is 12V version (imported 3W high brightness light bead).
     
    7. This product can automatically identify remote neutral point location. In case of abnormal situation, first check whether the remote control is neutral, then please restart the device without power.
     
    8. With the BB sound finder function, the customer needs to cut the buzzer mouth by itself

    SKU: ZMRLL
    €39.00
    inc. VAT

     IN STOCK
  • TBS Crossfire TX - FPV R/C Link

    TBS Crossfire TX - FPV R/C Link

    The TBS CROSSFIRE is a long range R/C link based on the newest RF technology, capable of self-healing two-way communications and range beyond comprehension. With a sensitivity of -130dB, full RF-side diveristy rather than just antenna-diversity, the features already implemented and the future upgrades to come make the TBS CROSSFIRE the only long range control link worthy of our times.

    Remote control links, however, are tasked with much more than range. Telemetry, robustness against interference, connectivity with smart devices, ease of use and the overall finish are often overlooked to achieve the last bit of range. The end result is often strange behavior, lack of reliability, or simply things that were never envisioned and thus not possible. Let's kiss those days goodbye, and move on to a brighter future :)

    Developed by Experts
    Team BlackSheep has been notorious for long range records, close-to-ground proximity flying in the Alps and deep urban operations. During our numerous missions all around the globe we have gathered a list of requirements, and have found that no existing system can cover them all. So we set on a long and painful path to develop a RC link system entirely from scratch, put it through its paces for over a year to ensure top-notch reliability and state-of-the-art functionality.

    Through the OLED Display on the transmitter, you can monitor the real-time location of your drone (TBS GPS or BlackBox with DJI Naza or APM-based GPS required).  The up- and downlink status provide a feeling of safety, the configuration options through the OLED display do away with any PC-based configuration tools. The pulsing LED relays your link budget and link health in colorized form (green = keep going, orange = turn around). In case of a crash, the location of the drone is visible on the OLED as well. The built in battery on the receiver turns it into a beacon automatically - and it will continue to transmit its last known location until the battery runs out.

    It Just Works
    Apart from unparalelled maximum range, the thing that we are most proud about on the TBS CROSSFIRE is that it just works. In the past, our question always was "could our R/C link keep up?". Many missions were aborted, or lines weren't flown, due to premature failure of the R/C link. Once we switched to the CROSSFIRE, all of these problems were gone. As long as we had video, we had control. And when the video was gone, we still had control - and telemetry. With the TBS CROSSFIRE comes peace of mind.

    Technical Specifications

    • Frequency Bands: 868MHz (EU, Russia) / 915MHz (USA, Asia, Australia)
    • Input Voltage: 3.5 - 13V
    • Power consumption: 1.1W (@10mW) - 3.2W (@2000mW)
    • Dimensions: 55 x 89 x 15 mm
    • Weight: 76g

    Package Includes

    • TBS Crossfire Transmitter
    • TBS Crossfire JR Adapter
    • TBS Crossfire Tuned Tx Antenna
    • Crossfire Futaba cable
    • Crossfire Graupner cable
    • Crossfire PWM Pigtail
    • Crossfire JST to XT30 cable
    SKU: crossfire
    €229.00
    inc. VAT

     LOW STOCK
  • G10 Fiberglass rod 10mm, 1m long

    G10 Fiberglass rod 10mm, 1m long

    G10 Fiberglass rod 10mm, 1m long
    SKU: G10Rod10
    €16.00
    inc. VAT

     IN STOCK
  • TBS Tango FPV RC Radio Controller

    TBS Tango FPV RC Radio Controller

    The TBS Tango is the next evolutionary step in remote control systems. The first of its kind, built specifically for FPV, with ergonomy fully thought through. With its wider stance you will feel less restricted in your hand movements, the curvy edges mold to the palm of your hands. Ideal for hybrid pinchers, thumbers and full pinchers alike! The game-pad like appearance honors our heritage as computer gamers, who are now turning the real world into the greatest game ever developed: FPV! :)

    Pre-Configured for Simplicity
    Pulling your hair out trying to configure models is a thing of the past! The Tango comes pre-programmed for all modern flight controls, with 10CH it provides plenty of capability even for moderately sized filming rigs, while being a perfect match for FPV racers. Multiple arming/disarming and mode switches, with pan / tilt gimbal controls.

    Video Range for Miles
    Flying from the screen is not necessary, but possible thanks to special anti-glare and anti-reflective coating. The 40CH video receiver is precisely tuned to its environment delivering unparalleled range. The built-in receiver antenna covers 180 degrees in forward facing direction. Using the proprietary "TBS Port", you can connect any goggles to the Tango, delivering crystal-clear video reception as well as long-lasting power, without needing external batteries.

    JR-Module Driven
    The Tango comes without a R/C system. It is driven by the popular and all-familiar JR module, providing compatibility for all R/C systems out there. We'll obviously recommend the TBS Crossfire, but you can also use the FrSky XJT, or Spektrum-, Futaba- or Graupner compatible modules. The Tango is ready for full telemetry support from most systems.

    Specifications

    • 10 CH digital remote control system
    • 15 model storage
    • 40ch high performance video receiver, PitMode compatible
    • Built-in 5dBi patch antenna for unparalleled range
    • CRSF and PPM output via JR-Module
    • Quad-bearing stick gimbals
    • 2x 3-Pos toggle, 2x 2-pos toggle, 2x extension port, 2x proportional dials, 4 digital trims, menu rocker dial, 3-button video receiver controls
    • Built-in FC support for: Cleanflight/Betaflight, DJI Naza V2, OpenPilot/TauLabs, Blade (e.g. tiny whoop)
    • Built-in JR support for: TBS Crossfire, FrSky XJT, Spektrum DSM2 Air, ImmersionRC EzUHF
    • 6000mAh Lithium-Ion battery, USB chargeable
    • USB upgradeable via TBS Agent
    SKU: TBStango
    €239.90
    inc. VAT

     LOW STOCK
  • Futaba T7PX Radio Case

    Futaba T7PX Radio Case

    Futaba T7PX Radio Case

    SKU: P-EBB1172
    €119.00
    inc. VAT

     LOW STOCK
  • Traxxas 5800mAh 7.4-volt 2-cell 25C LiPo with iD Auto Battery Identification

    Traxxas 5800mAh 7.4-volt 2-cell 25C LiPo with iD Auto Battery Identification

    Traxxas 5800mAh 7.4-volt 2-cell 25C LiPo with iD Auto Battery Identification

    Features:

    • iD Technology
    • Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail
    • Engineered specifically to fit Traxxas models
    • 12AWG multi strand wire is soldered directly to the LiPo cells eliminating increased resistance from bullet connectors and accidental reversed polarity connections

    Specifications:

    • Measures: 135 mm x 25 mm x 45 mm
    • Voltage: 7,4V (2S)
    • Capacity: 5800 mAh
    • C-rate: 25C

    Traxxas Power Cell iD Technology LiPo battery with high current connector.

    Requires:

    • EZ-Peak Plus 4-amp NiMH/LiPo Fast Charger with iD™ Auto Battery Identification
    • LiPo charging bag
    SKU: TRX2843X
    €79.90
    inc. VAT

     LOW STOCK
  • ISDT BattGo BG-8S Smart Battery Checker Balancer Receiver Signal Tester Quick & Charge Function

    ISDT BattGo BG-8S Smart Battery Checker Balancer Receiver Signal Tester Quick & Charge Function

    ISDT BattGo BG-8S Smart Battery Checker Balancer Receiver Signal Tester Quick & Charge Function

    Designed for LiPo, LiHv, LiFe, LiIon batteries

    Specification:

    • Working voltage: 5.0V-36V
    • Input voltage: 0.8V-15V
    • Input voltage 2-8S: 0.8V-4.8V
    • Battery cells: 1-8S
    • Voltage measurement accuracy: ±0.005V@4.2V
    • Balancing cells accurancy: 〈0.005V
    • Support USB charging: QC 2.0/3.0, BC1.2, Maximum output 12V/2A
    • Suppport smart battery: Charging and discharging setting,
    •                                        read battery info and usage history.
    • Supported Batt.Type: LiHv(1-8S)/LiPo(1-8S)/LiFe(1-8S)
    •                                    Lilon(1-8S)/NiMH/Cd(1-10S)
    • Display: 2.4//320x240 260,000 color IPS LCD
    • Dimension: 80 x 55 x 19mm
    • Weight: 59g
    • Operating Temperature: 0-40°C
    • Working Humidity: 10%-90%RH (noncondensing)
    • Storage Temperature: -20-60°C
    • Storage Humidity: 5%-90%RH (noncondensing)

    Smart Battery Checker

    • 260,000 color display visible under strong sunlight.
    • Exquisite and powerful BG-8S smart battery checker fully support BattGO technology.

     
    Make battery smarter

    • Cooperating with BattGO technology, only with XT60i connected and you can get full knowledge on detail parameters on your batter.
    • Easy to read cells voltage, battery circulations, working parameters and fast set to your preferred settings.

    Auto balancing cells voltage

    • Advanced auto balancing algorithm, make sure every cell is well balanced.
    • After completion auto into low power mode.

     
    Powerful portable charging function

    • Connecting to your battery, BG-8S can become your power bank for mobile devices.
    • Support Qualcom QC 2.0/3.0, compatible with BC1.2 and Apple devices.
    • Maximum output 12V/2A.

    Receiver signal test and protocol analysis

    • With standard 3 pin plug, BG-8S cab detect BEC output voltage.
    • BG-8S also support multiple protocol analysis including PWM, PPM&S.BUS and etc.
    • With future firmware upgrades more Protocol analysis will be supported.

     
    Multiple measurement connections

    • Support XT60/XT60i, XH2.54 1-8s balance lead, XH2.54 3 pin, JST ETC to measure voltage.
    • Support LiHv, LiPo, Lilon, LiFe, NiMh/Cd battery and BEC output measurements.

    Support USB upgrade, multilanguage options

    • BG-8S has Micro USB port, easily connect to PC to perform firmware upgrades.  

     
    XT60i Meant for BattGo

    • BG-8S uses XT60i connector which was jointly developed by ISDT and Amass, support BattGO technology, and highly compatible with original XT60 plugs.

     
    Package Included:
    1x ISDT BG-8S Smart Battery Checker

    SKU: ISDTBG8S
    €29.90
    inc. VAT

     IN STOCK
  • ISDT SCLinker Firmware Upgrade Data Cable for ISDT charger

    ISDT SCLinker Firmware Upgrade Data Cable for ISDT charger

    ISDT SCLinker Firmware Upgrade Data Cable for ISDT charger

    ISDT scLinker is an exclusive data cable for ISDT charger firmware upgrading,such as sc608,sc620.

    Specification:

    • Brand: ISDT
    • Name: scLinker
    • Material: Aluminium alloy+rubber
    • Cable length: 30 cm

    Upgrade Step:

    1. Visit the ISDT website http://www.isdt.co/scLinker.html to download the firmware.
    2. Connect to PC and power supply.
    3. Upgrade the firmware to your charger
    4. Wait for completion.

    Package included:
    1 x ISDT scLinker

    SKU: ISDTSCL
    €6.90
    inc. VAT

     LOW STOCK
  • LOGO 600 Carbon vertical fin w ball bearing, yellow

    LOGO 600 Carbon vertical fin w ball bearing, yellow

    LOGO 600 Carbon vertical fin w ball bearing, yellow

    SKU: MIK-05196
    €26.90
    inc. VAT

     72HR STOCK
  • LOGO 600 Carbon vertical fin w ball bearing, green

    LOGO 600 Carbon vertical fin w ball bearing, green

    LOGO 600 Carbon vertical fin w ball bearing, green

    SKU: MIK-05197
    €26.90
    inc. VAT

     72HR STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

     LOW STOCK
    SALE
  • Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC YGE 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controler ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

     LOW STOCK
    SALE
  • Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    This is the Beam AvantGarde 600 Class Electric Flybarless Helicopter Kit. This easily serviced helicopter features an innovative design that provides reduced weight and a low parts count. Other features include a quiet direct drive tail system, a fully serviceable CNC machined swash plate, heavy duty carbon fiber frames and much more, wrapped up inside a durable aerodynamic fiberglass canopy.

    Beam is 100% produced in Korea. no cheap parts, no bad bearings- all high quality!!

    One of the only kits allow choice of 6 and 12S lipos, where you beginner or competition pilot- this machine is for you.

    Features:

    • Innovative design allows for reduced wieght, easy servicing and low parts count
    • Durable canopy with aerodynamic design
    • Fully serviceable CNC swash plate
    • Triple bearing block design
    • Robust carbon fiber frames
    • Ultra quiet direct drive tail system
    • Turnbuckle pitch link design
    • Herringbone cut main gear & pinion gear design

    Specifications:

    • CNC full metal precision rotor head w/8mm spindle.
    • 11 tooth 6mm shaft size pinion, mod 0.8 (straight cut).
    • 100 tooth main gear, mod 0.8 (straight cut).
    • 4.0: 1 Tail Gear Ratio
    • Designed for power system up to 6S or 12S Li-Po
    • Carbon fiber frames for ultra-rigid and compact design
    • Easily serviceable engine maintenance
    • Triple bearing supported 10mm hardened main shaft
    • 120 degree dual race ball bearing metal swashplate
    • High quality DuPont® plastic injection mold w/strengthening fibers
    • Stainless steel damper mounted bearing torque tube for high efficiency
    • Top to bottom supported tail pitch plate for improved accuracy
    • Dual race ball bearing with thrust bearing supported tail blade grips
    • Front mounted rudder servo with push/pull bell crank
    • Carbon tail boom supports
    • Sleek Pre-painted fiberglass canopy
    • New lightweight landing gear
    SKU: BEAMAV600
    €399.00 €599.00
    inc. VAT

    SALE
  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • CF Ferrar Blades

    CF Ferrar Blades

    Walt Ferrar Carbon Fiber Tail Blades are made for FP and CP Micro helicopters to improve tail controls and tail performance.Weight: 0.41 gramsUsage: Micro HelisFeatures: Length: 43mm or 48mmRoot Thickness: 2mm Mounting Hole: 2.00mm
    SKU: SKU6412
    €9.90 €18.00
    inc. VAT

    
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €299.00
    inc. VAT

     LOW STOCK
    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesnt qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

    SALE
  • Wooden Blades 550 mm

    Wooden Blades 550 mm

    Low cost, and yet excellent product for Beginner and for Aerobatic practicing.
    Durable blades, made for 3-4 layers of quality wood, will deliver excellent performance without making holes in the pocket.

    Fits all 30-50 (550)size helis, length 550mm

    SKU: RCWB-550
    €10.00 €26.00
    inc. VAT

    SALE

Manufacturers

Latest Video

RC Market