Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

New Mikado LOGO 800 Scorpion HK-4535 Motor Combo

It use the tried and tested mechanical components of the LOGO 700 including:

• Larger lower frame halves and beefed-up landing gear
• Stronger pinned belt drive pulley on the main shaft  
• Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise
• Belt step-up gear to the tail gear box in the chassis
• Torque tube
• Sturdy aluminum open tail gear box

The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.

The benefits at a glance:

• Facilitates assembly, maintenance and repairs.
• The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
• The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
• The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
• The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
• In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
• Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
• The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
• The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.
• The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics.
• It’s as robust as ever.

Recommended main rotor blade sizes are 750-810 mm, depending on your personal taste and style of flying.
To power the 80, you can rely on reliable components from the LOGO 800 XXtreme, with 6 mm x 50 mm motor shafts.
Motors with other shaft diameters can be adapted easily by just replacing the shaft.
Two gear ratios are available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.
Motors with a larger bell than e.g. a Scorpion 4535-380 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.
The newly designed canopy of the LOGO 800 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 800 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor.
This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,500 g / 12.13 lb is possible.

Specifications:

• Rotor diameter 1800mm
• Rotor blades Rotortech 810mm Carbon Rotorblades
• RTF weight >5500g
• Recommended batterie 12-14 S Lipo, 4400-5500 mAh
• Main gear ratio 9.71 / 10.46
• Main Gear size 136 teeth, Module 1 25° herring bone
• Batterie slot 69 x 67 x 360 mm
• Length 1670mm
• Hight 445mm
• Width 205mm

Content:

• Motor Scorpion HK 4535-380Kv
• Motor pinion 13 teeth pinion, modul 1 with 25° lead angle
• Blades Rotortech 810mm Carbon Rotor Blades
• Tail Blades Rotortech 116mm Carbon Tail Rotor Blades
• Canopy Airbrush Glas Fiber Canopy

Accessories:

ESC Scorpion Tribunus 200A
VBar electronic VBar NEO/VBar NEO VLink

 

RotorTech 760mm Carbon Fiber Main Blades RT-760

• Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
  Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

    Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

•   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
•   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
•   Designed for your 3D performance.
•   Matched C.C.G. for stability.
•   Matched outward S.C.G. for better autos.
•   Airfoil designed for fast, accurate cyclic.
•   Layered for optimum aerodynamic damping.

Specifications:

•   Length: 760mm
•   Width: 66mm
•   Grip: >= 14mm
•   Hole: 5mm
•   Airfoil: Symmetrical
•   Tip: Aeroflat

Best Night blades from RotorTech, the “Luminous” series.Now you can have the excellent performance of the RotorTech carbon fiber blades with excellent visibility at night!

Specifications:

•     Length: 710mm
•     Width: 63mm
•     Weight: 208g
•     Root / Grip Thickness: >=14mm
•     Hole: 4-5mm
•     Airfoil: Symmetrical
•     Tip: Aeroflat
•     Make: Carbon Fiber
•     Common Application: 60-90, Gas powered R/C helicopters.

Features:

•     Removable / Replaceable power pack (sold separately)
•     Auto on/off
•     Different Top and Bottom Light Pattern
•     Long flight duration.

Includes:

•     1x 3D/holographic decal sheet
•     4x 1mm thick washers

Rotortech tail blades are known for their Quality and performance. This is also a producer of major blades as Edge, Halo, Curtis and others.
Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance.

Fits all 450-500 class helicopters.

Length: 57mm
Width: 17-20mm
Grip: 2.5mm
Hole: 2mm

• RotorTech 560mm Carbon Fiber Main Blades B-Surface- COSMETIC flaw only
• Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
  Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.
   
• Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.
• Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
• High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
• Designed for your 3D performance.
• Matched C.C.G. for stability.
• Matched outward S.C.G. for better autos.
• Airfoil designed for fast, accurate cyclic.
• Layered for optimum aerodynamic damping.

Specifications:

• Length:560mm
• Width: 53mm
• Grip: >= 12mm
• Hole: 3-4mm
• Airfoil: Symmetrical
• Tip: Aeroflat
• Make: Carbon Fiber
• Common Application: 550-570 size Flybarless RC Helicopters.

Best Night blades from RotorTech, the “Luminous” series.Now you can have the excellent performance of the RotorTech carbon fiber blades with excellent visibility at night!

Features:

• Replaceable power pack (sold separately).
• Auto on/off
• Different Top and Bottom Light Pattern
• Long flight duration

Specifications:

• Length: 610mm
• Width: 57mm
• Weight: 165-170g
• Root / Grip Thickness: >=12mm
• Hole: 4mm
• Airfoil: Symmetrical
• Tip: Aeroflat
• Make: Carbon Fiber
• Common Application: 46-50 size RC Helicopters.

Features:

• Removeable / Replaceable power pack (sold separately)
• Auto on/off
• Different Top and Bottom Light Pattern
• Long flight duration.

Includes:

• 1x 3D/holographic decal sheet
• 4x 1mm thick washers

Rotortech tail blades are known for their Quality and performance. This is also a producer of major blades as Edge, Halo, Curtis and others.
Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance.

Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.

Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

Included items of this special offer:

Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

1. Sky hero Spyder 6 frame set x 1( no canopy)
2. Motor Avizar 3536-380KV
3. ESC 40 amps
4. Propeller 14"
5. Distribution Board 100Amp
6. Hardware to mount the motors
7. Opale Paramodels Parachute

Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

Included items of this special offer:

• Sky-Hero Spyder 700 Kit (SKH00-401)
• ABS Painted Canopy
• 2x Red Color LED Lights (ALULED-016R)
• 2x White Color LED Lights (ALULED-016)
• 2x High Fluorescent Stickers (SKU46635)
• 10% saving coupon for your next order (coupon's details will be sent with the order)

Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

Included items of this special offer:

• Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
• Rescue Parachute for Sky-Hero Multicopters (OP17512)