Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

+32-486-808080 Contact Us

  • New Arrivals

  • On sale

More...
  • New Mikado LOGO 800 successor to LOGO 800 XXtreme

    New Mikado LOGO 800 successor to LOGO 800 XXtreme

    New Mikado LOGO 800 successor to LOGO 800 XXtreme

    It use the tried and tested mechanical components of the LOGO 700 including:

    • Larger lower frame halves and beefed-up landing gear
    • Stronger pinned belt drive pulley on the main shaft  
    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise
    • Belt step-up gear to the tail gear box in the chassis
    • Torque tube
    • Sturdy aluminum open tail gear box

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.
    • The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics.
    • It’s as robust as ever.

    Recommended main rotor blade sizes are 750-810 mm, depending on your personal taste and style of flying.
    To power the 80, you can rely on reliable components from the LOGO 800 XXtreme, with 6 mm x 50 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft.
    Two gear ratios are available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.
    Motors with a larger bell than e.g. a Scorpion 4535-380 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.
    The newly designed canopy of the LOGO 800 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 800 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor.
    This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,500 g / 12.13 lb is possible.

    Specifications:

    • Rotor diameter 1800mm
    • Rotor blades Rotortech 810mm Carbon Rotorblades
    • RTF weight >5500g
    • Recommended batterie 12-14 S Lipo, 4400-5500 mAh
    • Main gear ratio 9.71 / 10.46
    • Main Gear size 136 teeth, Module 1 25° herring bone
    • Batterie slot 69 x 67 x 360 mm
    • Length 1670mm
    • Hight 445mm
    • Width 205mm

    Content:

    • Blades Rotortech 810mm Carbon Rotor Blades
    • Tail Blades Rotortech 116mm Carbon Tail Rotor Blades
    • Canopy Airbrush Glas Fiber Canopy

    Accessories:

    • Motor Scorpion HK-4535-380Kv with Ø6x50mm shaft
    • ESC Scorpion Tribunus 200A
    • Motor pinion 13/14 teeth pinion, modul 1 with 25° lead angle
    • VBar electronic VBar NEO/VBar NEO VLink

     

    SKU: MIK-05277
    €1199.00
    inc. VAT

     72HR STOCK
  • New Mikado LOGO 800 Scorpion HK-4535 Motor Combo

    New Mikado LOGO 800 Scorpion HK-4535 Motor Combo

    New Mikado LOGO 800 Scorpion HK-4535 Motor Combo

    It use the tried and tested mechanical components of the LOGO 700 including:

    • Larger lower frame halves and beefed-up landing gear
    • Stronger pinned belt drive pulley on the main shaft  
    • Herring bone gear with a smaller main gear, with a steeper angle (136 T, 25°), for a sleeker silhouette, less weight and improved running noise
    • Belt step-up gear to the tail gear box in the chassis
    • Torque tube
    • Sturdy aluminum open tail gear box

    The new four-part chassis made from fiber-reinforced molded plastic is lighter and torsionally more rigid than a traditional carbon-aluminum chassis.

    The benefits at a glance:

    • Facilitates assembly, maintenance and repairs.
    • The upper halves take up the entire mechanics including motor, ESC and servos. Servos are mounted directly into the chassis, with optimal position and angle in relation to the swash plate.
    • The lower halves take up the new and already known and proved battery quick release system (like on LOGO 500/600). Batteries will be installed to battery plates inline, which are held by two quick release mechanisms on both sides of the chassis.
    • The clever separation of the chassis parts increases the possibility that, after a crash, only the lower parts have to be replaced.
    • The chassis sports a big locating surface for the ESC, an opening helps with the air flow around the ESC.
    • In the chassis you find a place for e.g. a CPU cooler, so you can mount a motor cooler into the model permanently.
    • Cable guides inside the chassis allow for a neat and protected wire-layout to the ESC/telemetry at the front, within the chassis.
    • The clever design of the molds even allows maintenance of the tail gear box inside the chassis, without disassembling the chassis.
    • The torque tube system makes the tail boom easily dismountable, in case you want to travel e.g. to competitions.
    • The newly designed rotor head is lighter and looks more delicate, but at the same time gives you the same good flight- and control characteristics.
    • It’s as robust as ever.

    Recommended main rotor blade sizes are 750-810 mm, depending on your personal taste and style of flying.
    To power the 80, you can rely on reliable components from the LOGO 800 XXtreme, with 6 mm x 50 mm motor shafts.
    Motors with other shaft diameters can be adapted easily by just replacing the shaft.
    Two gear ratios are available: 10.46:1 with a 13 T pinion or 9.71:1 with a 14 T pinion.
    Motors with a larger bell than e.g. a Scorpion 4535-380 can also be used: just replace the stock main gear with the larger one from the LOGO 700/800 XXtreme, including the one way bearing and an appropriate pinion.
    The newly designed canopy of the LOGO 800 combines the known and appealing design and visibility with improved aerodynamics: the LOGO 800 accelerates faster and reaches higher top speeds when directly compared to it’s predecessor.
    This helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
    With off-the-shelf components and 5,000 mAh batteries, an all-up-weight of 5,500 g / 12.13 lb is possible.

    Specifications:

    • Rotor diameter 1800mm
    • Rotor blades Rotortech 810mm Carbon Rotorblades
    • RTF weight >5500g
    • Recommended batterie 12-14 S Lipo, 4400-5500 mAh
    • Main gear ratio 9.71 / 10.46
    • Main Gear size 136 teeth, Module 1 25° herring bone
    • Batterie slot 69 x 67 x 360 mm
    • Length 1670mm
    • Hight 445mm
    • Width 205mm

    Content:

    • Motor Scorpion HK 4535-380Kv
    • Motor pinion 13 teeth pinion, modul 1 with 25° lead angle
    • Blades Rotortech 810mm Carbon Rotor Blades
    • Tail Blades Rotortech 116mm Carbon Tail Rotor Blades
    • Canopy Airbrush Glas Fiber Canopy

    Accessories:

    ESC Scorpion Tribunus 200A
    VBar electronic VBar NEO/VBar NEO VLink

     

    SKU: MIK-05370
    €1550.00
    inc. VAT

     72HR STOCK
  • Mikado LOGO 700/800 Swashplate guide

    Mikado LOGO 700/800 Swashplate guide

    Mikado LOGO 700/800 Swashplate guide

    SKU: MIK-05354
    €7.90
    inc. VAT

  • RotorTech 760mm Carbon Fiber Main Blades RT-760

    RotorTech 760mm Carbon Fiber Main Blades RT-760

    RotorTech 760mm Carbon Fiber Main Blades RT-760

    • Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
      Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

        Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

    •   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
    •   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
    •   Designed for your 3D performance.
    •   Matched C.C.G. for stability.
    •   Matched outward S.C.G. for better autos.
    •   Airfoil designed for fast, accurate cyclic.
    •   Layered for optimum aerodynamic damping.

    Specifications:

    •   Length: 760mm
    •   Width: 66mm
    •   Grip: >= 14mm
    •   Hole: 5mm
    •   Airfoil: Symmetrical
    •   Tip: Aeroflat
    SKU: RT-760
    €125.00
    inc. VAT

     IN STOCK
  • RotorTech 92mm LUMINOUS NIGHT tail blades H-0929C-L

    RotorTech 92mm LUMINOUS NIGHT tail blades H-0929C-L

    RotorTech 92mm LUMINOUS NIGHT tail blades H-0929C-L

    • Uses LED type lights.
    • Lights turned on with centrifugal force.
    • Powered by easily replaceable lithium cell button batteries.
    • Specifications:
    • Length: 92mm
    • Width: 30mm
    • Root/Grip: >= 5mm
    • Weight: 6.6g
    • Bolt hole: 3mm
    • Includes:
    • One pair of luminous tail blades.
    • Two CR-1225 3V lithium cell button batteries preinstalled into blades.
    • Two spare CR-1225 lithium button cell batteries.
    • Four 3x10x1.5mm tail blade spacers.
    • Two fish lines (battery removal tool).
    • One instruction sheet.
    SKU: H-0929C-L
    €49.00
    inc. VAT

     IN STOCK
  • RotorTech Luminous V2 710mm Night Blades H-7166C-L

    RotorTech Luminous V2 710mm Night Blades H-7166C-L

    Best Night blades from RotorTech, the “Luminous” series.Now you can have the excellent performance of the RotorTech carbon fiber blades with excellent visibility at night!

    Specifications:

    •     Length: 710mm
    •     Width: 63mm
    •     Weight: 208g
    •     Root / Grip Thickness: >=14mm
    •     Hole: 4-5mm
    •     Airfoil: Symmetrical
    •     Tip: Aeroflat
    •     Make: Carbon Fiber
    •     Common Application: 60-90, Gas powered R/C helicopters.

    Features:

    •     Removable / Replaceable power pack (sold separately)
    •     Auto on/off
    •     Different Top and Bottom Light Pattern
    •     Long flight duration.

    Includes:

    •     1x 3D/holographic decal sheet
    •     4x 1mm thick washers
    SKU: RT-710-L
    €139.00
    inc. VAT

     IN STOCK
  • FunKey Rotortech Carbon tail rotor blades 76mm

    FunKey Rotortech Carbon tail rotor blades 76mm

    Rotortech tail blades are known for their Quality and performance. This is also a producer of major blades as Edge, Halo, Curtis and others.
    Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance.

    Length 76mm
    Width 23mm
    Grip 5mm
    Hole: 3mm
    Air foil: Symmetrical
    Tip: Round
     

    SKU: RT-76
    €13.00
    inc. VAT

     IN STOCK
  • FunKey Rotortech Carbon tail rotor blades 57mm

    FunKey Rotortech Carbon tail rotor blades 57mm

    Rotortech tail blades are known for their Quality and performance. This is also a producer of major blades as Edge, Halo, Curtis and others.
    Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance.

    Fits all 450-500 class helicopters.

    Length: 57mm
    Width: 17-20mm
    Grip: 2.5mm
    Hole: 2mm

    SKU: RT-57
    €12.00
    inc. VAT

     IN STOCK
  • FunKey Rotortech Carbon 95mm tail rotor blades, B-surface

    FunKey Rotortech Carbon 95mm tail rotor blades, B-surface

    Rotortech tail blades are known for their Quality and performance. This is also a producer of major blades as Edge, Halo, Curtis and others.
    Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance.

    • Length: 95mm
    • Width: 30mm
    • Grip: >= 5mm
    • Hole: 3mm
    • Common Application: . 600-700 size R/C helicopters
    SKU: RT-95-BSUR
    €18.00
    inc. VAT

     IN STOCK
  • RotorTech 560mm Carbon Fiber Main Blades B-Surface

    RotorTech 560mm Carbon Fiber Main Blades B-Surface

    • RotorTech 560mm Carbon Fiber Main Blades B-Surface- COSMETIC flaw only
    • Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
      Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.
       
    • Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.
    • Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
    • High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
    • Designed for your 3D performance.
    • Matched C.C.G. for stability.
    • Matched outward S.C.G. for better autos.
    • Airfoil designed for fast, accurate cyclic.
    • Layered for optimum aerodynamic damping.

    Specifications:

    • Length:560mm
    • Width: 53mm
    • Grip: >= 12mm
    • Hole: 3-4mm
    • Airfoil: Symmetrical
    • Tip: Aeroflat
    • Make: Carbon Fiber
    • Common Application: 550-570 size Flybarless RC Helicopters.
    SKU: RT-560-B-SURF
    €46.00
    inc. VAT

     IN STOCK
  • RotorTech 710mm Carbon Fiber Main Blades RT-710

    RotorTech 710mm Carbon Fiber Main Blades RT-710

    Rotortech tail blades incorporated years of R&D and pilot feedback into producing the best blades on the market today!
    Offering pilots the lastest technology,those great looking Blades can be trusted to perform with accuracy, speed, and efficiency.

      Safety wire runs alone the inner core of the blade. This keeps the blades in one piece upon a crash to insure safety to pilots and bystanders.

    •   Low parasitic drag coefficient due to the efficient airfoil and top quality clear resin finish, insures more engine power is transferred for lift, speed and more crisp maneuvers.
    •   High density D-Spar of Carbon Fiber mixed with a special resin absorbs all high-g span wise loading.
    •   Designed for your 3D performance.
    •   Matched C.C.G. for stability.
    •   Matched outward S.C.G. for better autos.
    •   Airfoil designed for fast, accurate cyclic.
    •   Layered for optimum aerodynamic damping.

    Specifications:

      Length: 710mm
      Width: 61.5mm
      Grip: >= 12mm
      Hole: 4-5mm
      Airfoil: Symmetrical
      Tip: Aeroflat

    SKU: RT-710
    €99.00
    inc. VAT

     IN STOCK
  • RotorTech Luminous V2 610mm Night Blades H-6166C-3D-LS

    RotorTech Luminous V2 610mm Night Blades H-6166C-3D-LS

    Best Night blades from RotorTech, the “Luminous” series.Now you can have the excellent performance of the RotorTech carbon fiber blades with excellent visibility at night!

    Features:

    • Replaceable power pack (sold separately).
    • Auto on/off
    • Different Top and Bottom Light Pattern
    • Long flight duration

    Specifications:

    • Length: 610mm
    • Width: 57mm
    • Weight: 165-170g
    • Root / Grip Thickness: >=12mm
    • Hole: 4mm
    • Airfoil: Symmetrical
    • Tip: Aeroflat
    • Make: Carbon Fiber
    • Common Application: 46-50 size RC Helicopters.

    Features:

    • Removeable / Replaceable power pack (sold separately)
    • Auto on/off
    • Different Top and Bottom Light Pattern
    • Long flight duration.

    Includes:

    • 1x 3D/holographic decal sheet
    • 4x 1mm thick washers
    SKU: RT-610-L
    €125.00
    inc. VAT

     IN STOCK
  • RotorTech Luminous Night Blade Battery Power Pack H-9913

    RotorTech Luminous Night Blade Battery Power Pack H-9913

    This is the power pack of rechargable batteries for all RotorTech V2 and Aurora night blades.

    Manufactured by Fun-Key, the Rotortech Night Blades Power Packs can be used with other Fun-Key manufactured night blades such as Switch Blades, Rail Blades, and Radix. 

     

    SKU: H-9913
    €39.90
    inc. VAT

     IN STOCK
  • FunKey Rotortech Carbon tail rotor blades 115mm

    FunKey Rotortech Carbon tail rotor blades 115mm

    Rotortech tail blades are known for their Quality and performance. This is also a producer of major blades as Edge, Halo, Curtis and others.
    Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance.

    • Length: 115mm
    • Width: 30mm
    • Grip: > =5mm
    • Hole: 3mm
    • Common Application: .90/700 class R/C helicopters

     

    SKU: RT-115
    €26.50
    inc. VAT

     IN STOCK
  • FunKey Rotortech Carbon 120mm tail rotor blades, B-surface

    FunKey Rotortech Carbon 120mm tail rotor blades, B-surface

    Rotortech tail blades are known for their Quality and performance. This is also a producer of major blades as Edge, Halo, Curtis and others.
    Unmatched carbon fiber craftsmanship and quality. Perfect spanwise and cordwise balance.

    • Length: 120mm
    • Width: 30mm
    • Grip: > =5mm
    • Hole: 3mm
    • Common Application:700-800 class R/C helicopters
    SKU: RT-120-BSUR
    €26.00
    inc. VAT

     IN STOCK
  • RotorTech 110mm LUMINOUS NIGHT tail blades H-1109C-L

    RotorTech 110mm LUMINOUS NIGHT tail blades H-1109C-L

     RotorTech 110mm LUMINOUS Carbon fiber Night tail blades

    • Uses LED type lights.
    • Lights turned on with centrifugal force.
    • Powered by easily replaceable lithium cell button batteries.
    • Specifications:
    • Length: 110mm
    • Width: 32mm
    • Root/Grip: >= 5mm
    • Weight: 7g
    • Bolt hole: 3mm
    • Includes:
    • One pair of luminous tail blades.
    • Two CR-1225 3V lithium cell button batteries preinstalled into blades.
    • Two spare CR-1225 lithium button cell batteries.
    • Four 3x10x1.5mm tail blade spacers.
    • Two fish lines (battery removal tool).
    • One instruction sheet.
    SKU: RT-110-L-A
    €59.00
    inc. VAT

     IN STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

     LOW STOCK
    SALE
  • Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC HV 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controler ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

     LOW STOCK
    SALE
  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €299.00
    inc. VAT

     LOW STOCK
    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesnt qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

     LOW STOCK
    SALE
  • Wooden Blades 550 mm

    Wooden Blades 550 mm

    Low cost, and yet excellent product for Beginner and for Aerobatic practicing.
    Durable blades, made for 3-4 layers of quality wood, will deliver excellent performance without making holes in the pocket.

    Fits all 30-50 (550)size helis, length 550mm

    SKU: RCWB-550
    €10.00 €26.00
    inc. VAT

    SALE

Manufacturers

Latest Video

RC Market