Your Best Source for R/C Helicopters,Drones,FPV,Multicopters,Aerial photography

+32-486-808080 Contact Us

  • New Arrivals

  • On sale

More...
  • Goblin URUKAY GENESIS Sportive model Helicopter Kit green color

    Goblin URUKAY GENESIS Sportive model Helicopter Kit green color

    Goblin URUKAY GENESIS Sportive model Helicopter Kit green color

    Please note- this is the preorder , to be planned in begin February!

    • AIRFRAME weight: 2950gr (with blades, no battery, no electronics)
    • Main blade length: 690mm to 760mm
    • Tail blade length: 105 to 115 mm
    • Main rotor diameter:  1662 mm (with new F3c 747 mm blades included)
    • Tail rotor diameter: 284 mm (with 105 mm tail blades included)
    • Cyclic Servos: standard size 40mm
    • Tail Servo: standard size 40mm.
    • Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)
    • Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
    • Typical motor: 4525 series
    • Typical speed controller: 12S, 160-200 A
    • Battery size: 12S 4500-5500 mAh.
    SKU: SG747
    €1640.00
    inc. VAT

     72HR STOCK
  • Goblin RAW " Skelet" Pod-and-Boom helicopter Kit yellow neon color

    Goblin RAW " Skelet" Pod-and-Boom helicopter Kit yellow neon color

    Goblin RAW " Skelet" Pod-and-Boom helicopter Kit yellow neon color

    Please note- this is the preorder , to be planned in begin February!

    The total price is 939 eur. 200 eur deposit and 739eur to be paid before delivery

    RAW TECHNICAL SPECIFICATIONS

    • AIRFRAME weight: 2620gr (with blades, no battery, no electronics)
    • Main blade length: 650mm to 720mm
    • Tail blade length: 105 to 115 mm
    • Main rotor diameter: 1548 mm (with 690 mm blades included)
    • Tail rotor diameter: 284 mm (with 105 mm tail blades included)
    • Cyclic Servos: standard size 40mm
    • Tail Servo: standard size 40mm.
    • Main Rotor ratio: 11.8 to 8.8 (21T included: 10.1:1)
    • Tail Rotor ratio: 5.0-4.8:1 (26T included: 4.9:1)
    • Typical motor: 4525 series
    • Typical speed controller: 12S, 160-200 A
    • Battery size: 12S 4500-5500 mAh.
    SKU: SG745
    €200.00
    inc. VAT

     72HR STOCK
  • CubePilot The Cube Pixhawk ADS-B Carrier Board

    CubePilot The Cube Pixhawk ADS-B Carrier Board

    • Carrier board for the Pixhawk Cube Black, Yellow, Purple, Orange & Blue
      Integrated 1090MHz ADS-B receiver/transmitter module
    SKU: ADSB-CB
    €159.00
    inc. VAT

     LOW STOCK
  • Adapter XT60 Male to Male DC 5.5X 2.1mm Power Cable For FPV Goggles Battery

    Adapter XT60 Male to Male DC 5.5X 2.1mm Power Cable For FPV Goggles Battery

    Amass 200mm XT60 Male Connector to Male DC 5.5X 2.1mm Adapter Power Cable For FPV Goggles Battery

    This adapter cable can transfer the RC Drone battery (XT60/ XT30/ T plug) to the goggles battery plug (DC5.5 2.1 plug)

    Description:
    Brand name: Amass
    XT60 to 5.5/5.5mm DC
    Length: 200mm
    Suitble for FPV system
     
    Package Included:
    1x Amass XT60 to 5.5/5.5mm DC power cable

    SKU: XT60FPV
    €3.00
    inc. VAT

     IN STOCK
  • Header Tank Size 80cc Assembly with Metal Alu Holder

    Header Tank Size 80cc Assembly with Metal Alu Holder

    Specifications:

    • Size: 81 * 40 * 25mm
    • Net Weight: 29g
    • Color: Purple
    • Holder material: Metal

    Features:

    • TANK capacity: 80cc
    • This is a replacement Header tank with Metal Holder.
    • Great value and great looking CNC header tank support.

    Package Included:

    • 1 x Header Tank
    • 1 x Holder
    • Color of holder is purple
    SKU: UP013A-P
    €19.00
    inc. VAT

     LOW STOCK
  • Fin set neon yellow, LOGO 500/550/600

    Fin set neon yellow, LOGO 500/550/600

    Fin set neon yellow, LOGO 500/550/600
    SKU: MIK-4648
    €53.50
    inc. VAT

     IN STOCK
  • MR30 Power 3 POLES Connectors with protective cover

    MR30 Power 3 POLES Connectors with protective cover

    The MR30 ensures a solid high-amp connection, perfect for applications up to 30A constant.

    Features

    • Lightweight
    • Short circuit protection
    • Specifications
    • Brand Name: Amass
    • Item Name: MR30 connector
    • Body Material and Surface Plating: Brass and gold plated
    • Insulation Material: PA66
    • Original Internal Resistance: 0.8MΩ
    • 500 Times Internal Resistance: 0.85MΩ
    • Max. Continuous Current: 30A (within 30 minutes)
    • Max. Instantaneous Current: 40A (within 1 minute)
    • Recommended Cable Spec: 18AWG 2.8mm diameter
    • Recommended Soldering Spec: 400° C/3S
    • Weight: 1.2g/pcs
    • Insulation Degree: UL94V-0
    • Machine live: 3000 Times
    • Suitable for connecting ESCs, Motors, RC Airplanes
    SKU: MR30
    €3.50
    inc. VAT

     IN STOCK
  • NITECORE I4 -4 BAY BATTERY CHARGER

    NITECORE I4 -4 BAY BATTERY CHARGER

    Designed and built upon the successful foundation laid by its predecessor, the NEW i4 is a charger featuring state of the art design and functionalities. It is designed to work immaculately with a large variety of rechargeable batteries, and is capable of charging 4 batteries simultaneously. With its accelerated charging rate up to 1.5A, fully charging large capacity batteries will no longer be a dreadful process. The ingenious Active Current Distribution (ACD) technology allows the NEW i4 to bring the entire charging process to an orderly manner depending on user preferences. The new technologies incorporated allows it to distinguish non-rechargeable batteries from rechargeable ones, and the NEW i4 adopts the appropriate charging mode for different battery types and capacities. Users may also configure its settings to suit their individual needs. Four independent indicators provide real time feedback on battery status.

    Product Highlights:

    • 4 Bay Charger
    • Multiple charging speeds - .375A x 4, .5A x 2, .75A x 2, or 1.5A x 1
    • LEDs show the charging status of each cell
    • Automatically turns off when charging is complete
    • Reverse polarity protection protects if cell is entered in the wrong way

    Packaging Contents:

    • Nitecore i4 Intellicharger
    • Standard EU Power Cable
    • User Manual

    Additional Features:

    • Active Current Distribution (ACD) Technology
    • Compatible with 1.2V, 3.7V, 4.2V, 4.35V batteries
    • Charging program optimized for IMR batteries
    • Automatic current selection based on battery capacity
    • Automatic detection of non-rechargeable Lithium batteries
    • Terminating threshold for battery voltages and charging current can be set independently for each slot
    • Capable of charging four batteries simultaneously
    • Automatic adoption between three charging modes (CC, CV, and dV/dt)
    • Automatically detects battery power status and displays charging progress
    • Automatically stops charging upon charging completion
    • Reverse polarity protection and short circuit prevention
    • Over-discharged battery recovery
    • Overtime charging protection
    • Designed for optimal heat dissipation
    • Made from fire resistant, flame retardant PC material
    • Certified by RoHS, CE, FCC and CEC
    SKU: NTCI4
    €24.00
    inc. VAT

     LOW STOCK
  • USB-C to USB-C Data Cable for DJI Mavic series/Spark/Air

    USB-C to USB-C Data Cable for DJI Mavic series/Spark/Air

    Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to USB-C android devices when flying to view and transfer the real time video / images
    The usb-c is to plug in the controller, and other side to android device.
    The Cable outer is make of nylon braided protection, which is very dural and anti-pull.

    90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
    Its length is +-30cm, which is the perfect length for controller to cellphone / tablet

    Connector: USB-C to USB-C (Android devices and others)
    Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom

    SKU: DJIUSBC
    €9.90 €15.00
    inc. VAT

     IN STOCK
  • USB-C to Lightning Data Cable for DJI Mavic series/Spark/Air

    USB-C to Lightning Data Cable for DJI Mavic series/Spark/Air

    Upgraded Data Cable for Mavic Pro / Mavic Air / Spark, you can used it to connect the drone to iPhone / iPad when flying to view and transfer the real time video / images
    The usb-c is to plug in the controller, and the lighning end is used with iPhone /Tablet, it support IOS 7,8,9,10, fit for iPhone X / 8 / 7 / 7/ 6 / 5 / SE, iPad / iPad Air / iPad Mini and etc
    The Cable outer is make of nylon braided protection, which is very dural and anti-pull.

    90 degree angle of the end make the phone and the controller connect in a good addition and protect the end from bending
    Its length is +-30cm, which is the perfect length for controller to cellphone / tablet

    Connector: USB-C to Lightning ( for iPhone / iPad )
    Compatible with: DJI Mavic Mini / Mavic Pro / Mavic Air / Spark / Mavic 2 Pro & Zoom

    SKU: DJIAPPLE
    €9.90 €15.00
    inc. VAT

     IN STOCK
  • Raptor 60-90 3D fin set

    Raptor 60-90 3D fin set

    These carbon fibre tail fins for the RAPTOR 60-90 are available in solid and cut-out 3D styles.
    CNC machined from highest quality multi laminated carbon composite. Lightweight and strong!

    SKU: RCMC-007
    €25.00 €49.00
    inc. VAT

     IN STOCK
  • CubePilot The Cube Orange Standard Set (ADS-B Carrier Board)

    CubePilot The Cube Orange Standard Set (ADS-B Carrier Board)

    • Pixhawk Cube Orange (ADS-B Carrier Board)
    • Features a 1,090 MHz ADS-B receiver from uAvionix
    • Formerly known as Pixhawk 2.1
    • Automatically avoids planes
    • Integrated in the new ADS-B carrier board

    The Pixhawk Cube Orange (ADS-B Carrier Board) is integrated in the new ADS-B carrier board. The autopilot equipped with the new unmanned aerial vehicle system can receive information about the location of manned aircraft in the area.

    Specifications

    • Sensors: Accelerator, Gyroscope, Compass, Barometric Pressure Sensor
    • Current input voltage / nominal input current: 4.1-5.7 V / 2.5 A.
    • Rated power / input power: 14 W.
    • USB port input voltage / nominal input current: 4-5.7 V / 250 mA
    • Servorail input voltage: 3.3 V / 5 V.
    • Not waterproof. External waterproof protection is needed
    • Operation Temperature: -10 ° C / 55 ° C
    • Cube orange housing material: CNC aluminum alloy
    • Housing material standard carrier plate: ABS injection molding
    SKU: HX4-ADSB
    €301.00
    inc. VAT

     LOW STOCK
  • The DJI FPV Air Unit module HD digital transmission

    The DJI FPV Air Unit module HD digital transmission

    The DJI FPV - Air Unit module is at the heart of the HD digital transmission system developed by DJI. Composed of a main module that acts as a radio receiver and video transmitter, a camera and a coaxial cable, the Air Unit is installed on your UAV. Compact and adapted to the standards of the UAV racer, it will be fixed very simply with the supplied screws.

    The video transmitter has a low latency of 28ms for comfortable and precise steering. The announced range of 700m in CE standard allows you to make freestyle flights without interference. The video return is made in HD 720p at 120 fps for a perfect quality and therefore a safe piloting.

    The camera records your flights in 1080p at 60fps to make fast and dynamic aerial shots. A microSD card must be inserted in the camera, not exceeding 128GB.

    Contents:

    • 1 x DJI FPV - Air Unit
    • 1 x DJI FPV camera
    • 4 x M2 screws
    • 1 x 3 in 1 cable
    • 2 x Angled MMCX antenna
    SKU: DJI-AIR
    €179.00
    inc. VAT

     LOW STOCK
  • RadioMaster Real Leather Side Grips COW color, Pair

    RadioMaster Real Leather Side Grips COW color, Pair

    1 Pair COW Original RadioMaster Leather Side Grips Replacement Parts for TX16S Transmitter

    SKU: TXGRICOW
    €14.99
    inc. VAT

     IN STOCK
  • DJI FPV Remote Controller (Mode 2)

    DJI FPV Remote Controller (Mode 2)

    DJI FPV Remote Controller
    With the DJI FPV Remote Controller, parameters of each component can be adjusted remotely. Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver. Users can also enjoy 7ms ultra-low latency between the remote controller and the air unit.

    FEATURES
    Parameters can be set remotely.

    Purchasing the DJI FPV Goggles and the DJI FPV Air Unit eliminates the need of any additional receiver.

    7ms ultra-low latency.

    Remote Controller
    Weight: 765 g
    Operation Frequency: 5.725-5.850 GHz
    Max. Transmission Distance (Unobstructed,free of interference): FCC/SRRC: 4 km; CE: 0.7 km
    Transmitter Power (EIRP): FCC: <30 dBm; CE: <14dBm; SRRC:<19dBm
    Operation Current/Voltage: 0.6 A @ 7.6 V
    Operation Temperature: 0° to 40°C (32° to 104°F)
    Charging Temperature: 5° to 40°C (41° to 104°F)

    Remote Controller Intelligent Battery
    Battery Type: LiPo 2S
    Capacity: 4920 mAh
    Voltage: 7.6 V
    Energy: 37.39 Wh

    SKU: djirem
    €339.00
    inc. VAT

     LOW STOCK
  • Universal Quick Release Canopy mount set of 2, fits Many Helicopters

    Universal Quick Release Canopy mount set of 2, fits Many Helicopters

    Quick Release Canopy system mount features a custom locking push/pull pin design made to fit your Helicopter

    Standoff is made from 6061-T6 Aluminum ,Silver Anodized
    Quick Release pin is made from all stainless steel construction and is designed to stay connected to the canopy when not in use

    Kit Includes:

    • Quick Release Pin x 2
    • Quick Release Standoff x 2
    • Preinstalled Grommets x 2
    • ABS standoff 3mm x 2
    • ABS standoff 5mm x 2
    • ABS standoff 6mm x 2
    • ABS standoff 8mm x 2
    • Screws M3 x 2

    Standoff length is 30mm, supplied ABS spacers allow to adapt to different lengths.

    NOTE: Use of this kit required you to increase the canopy mounting hole

    SKU: CANPOST
    €26.00
    inc. VAT

     IN STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

    
    SALE
  • Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, HW 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC HV 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controller ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

     LOW STOCK
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €299.00
    inc. VAT

     LOW STOCK
    SALE
  • Helicopter Carry Bag Special offer, Second choice- Brand new

    Helicopter Carry Bag Special offer, Second choice- Brand new

    Due the bad storage conditions in one of our warehouses, some of our bags got dirty. there is Absolutely no damage to zipper or material, its pure something can be washed.

    We want you to benefit from it, so we offer the bags at Very special discount. Bear in mind its a limited offer.

    Each bag is guarantied and will be checked again before shipping.

    See choice of sizes.

    Some of models can be delivered in RED-YELLOW-BLACK, or BLUE-YELLOW-BLACK, we can not guaranty the color, but in most cases it will be RED-YELLOW-BLACK

     

    SKU: HBAGSE450
    €25.00
    inc. VAT

     IN STOCK
    SALE
  • Helicopter Carry Bag- free with Helicopter kit

    Helicopter Carry Bag- free with Helicopter kit

    Free Helicopter Carry bag with each helicopter Kit Purchased. size will be delivered corresponding to the kit

    Avaliable sizes 450-500-550-600

    PLEASE note its a limited time offer.

    SKU: HBAG700


    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatible with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required.

    Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesn't qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

     72HR STOCK
    SALE

Manufacturers

Latest Video

RC Market