Drones, FPV, Multicopters, Aerial photography,helicopters European best shop

+32-486-808080 Contact Us

ERC Latest



01-04-2017: New Whoop frames arrived, upgrade your inductix, also WBX frames from Ragg-e in stock now!


29-07-2016: Check out the new MSH Protos 380, it just came in! We have its spare-parts defined HERE.


20-07-2016: Want to race crash proof with your Graupner Racing Gate? You can now, because our graupner tape is back in stock!


16-07-2016: Want to cruise through the city in style? Check out our new added electric scooters!


15-07-2016: Are you ready for the FPV racing season? Purchase our custom designed Flag, Archer Gate and Ring Gate and make an awesome circuit!


13-07-2016: Problems with fitting a camera on your FPV racer? Too big? Check out the new Runcam Swift now!


  • New Arrivals

  • On sale

More...
  • Align Super Starter For Helicopter

    Align Super Starter For Helicopter

    Ergonomically designed for optimal hand grip to prevent slippage, light weight, and easy to assemble/disassemble for transport ease.
    Suitable for fixed wing airplanes or helicopters, engine can be started with a simple one hand press on the button.

     

    • Suitable for up to 50cc gasoline engine or 300 class nitro engine.
    • Designed for user replaceable, common 450 heli sized, 3S1P 1900~2300mAh/16c lipo batteries.
    • Fully charged battery is, capable of 500 starts and beyond.
    • Battery packs are charged with any, T-REX 450 battery chargers.
    • Starting adaptor includes double one way bearing design.
    • High efficiency motor providing high starting power, and low reacting, force.
    • LED battery voltage indicator and over-discharge protection circuitry.
    • Battery undervoltage protection.
    • Overheating protection
    • Protection against stalling by flooded torque overloading engine.
    • Suitable battery:Li-Po 3S1P 11.1V 1900~2300mAh 16C and above(maximum size 112x35x24mm)
    • No load rotation speed:2300rpm
    • Battery undervoltage:10.8V
    • Quiescent current:0 mA
    • Motor overheat protection:80°C
    • Decelerate gear ratio:5.3:1
    • Size:80x60x390mm
    • Weight:700g (w/o battery)

    Accessories:

    • Starter body x 1
    • Helicopter Starter Shaft x 1

    Option:

    • Battery:3S1P 11.1V 1900~2300mAh 16C and above Li-Poly battery

     

    SKU: HFSSTQ06
    €129.00
    inc. VAT

     72HR STOCK
  • SAB GOBLIN FIREBALL Special Edition green Combo

    SAB GOBLIN FIREBALL Special Edition green Combo

    SAB GOBLIN FIREBALL Special Edition green Combo

    EASIER THAN EVER!

    Simplicity is the key feature of the Goblin Fireball
    The goal of the project was to design a simple model with, good performance that crashes well and is fast, simple and cheap to repair.

    For fun, for training, for HARD 3D it must be the Goblin Fireball!
    Registered design 003738210-0001/0004

    Main Feature:

    • With the new-patented "Direct Drive" system, this has been achieved.
    • The reduced parts count delivers maintenance that has never been easier!
    • Carefully selected materials used in the soft plastic landing gear, plastic blade grips arms, hard steel shaft, strong plastic frames and a polycarbonate canopy and boom secure minimal crash damage and reduce repair bills.

    Features:

    • Main rotor diameter: 624 mm
    • Main blade length: 280mm
    • Tail rotor diameter: 139 mm
    • Tail blade length: 50 mm
    • Main shaft diameter: 5 mm
    • Tail shaft diameter: 3 mm
    • Weight including electronics: 735 gr

    Electronic Specifications:

    • Cyclic Servos: Micro size 23mm
    • Tail Servo: Micro size 23 mm
    • Speed Control 50-60A.
    • Typical battery setup: 6S 1000/1250 mAh

    Kit included:

    • Direct standard Motor
    • Cyclic servos included ( 3x DS12C )
    • Tail servo included ( 1x DS12T )
    • ESC 60A included
    • 4 servo horn included
    • BL 280 mm main blades
    • 50 mm tail blades
    • 2 x SAB 6S 1050mAh Lipo Akku SAB-SB128

    About the kit:
    SAB Goblin comes as a kit, the system must be built completely from individual parts.
    The kit is recommended for advanced pilots.

    SKU: SG288
    €469.00
    inc. VAT

     72HR STOCK
  • SAB GOBLIN FIREBALL Special Edition red Combo

    SAB GOBLIN FIREBALL Special Edition red Combo

    SAB GOBLIN FIREBALL Special Edition red Combo

    EASIER THAN EVER!

    Simplicity is the key feature of the Goblin Fireball
    The goal of the project was to design a simple model with, good performance that crashes well and is fast, simple and cheap to repair.

    For fun, for training, for HARD 3D it must be the Goblin Fireball!
    Registered design 003738210-0001/0004

    Main Feature:

    • With the new-patented "Direct Drive" system, this has been achieved.
    • The reduced parts count delivers maintenance that has never been easier!
    • Carefully selected materials used in the soft plastic landing gear, plastic blade grips arms, hard steel shaft, strong plastic frames and a polycarbonate canopy and boom secure minimal crash damage and reduce repair bills.

    Features:

    • Main rotor diameter: 624 mm
    • Main blade length: 280mm
    • Tail rotor diameter: 139 mm
    • Tail blade length: 50 mm
    • Main shaft diameter: 5 mm
    • Tail shaft diameter: 3 mm
    • Weight including electronics: 735 gr

    Electronic Specifications:

    • Cyclic Servos: Micro size 23mm
    • Tail Servo: Micro size 23 mm
    • Speed Control 50-60A.
    • Typical battery setup: 6S 1000/1250 mAh

    Kit included:

    • Direct standard Motor
    • Cyclic servos included ( 3x DS12C )
    • Tail servo included ( 1x DS12T )
    • ESC 60A included
    • 4 servo horn included
    • BL 280 mm main blades
    • 50 mm tail blades
    • 2 x SAB 6S 1050mAh Lipo Akku SAB-SB128

    About the kit:
    SAB Goblin comes as a kit, the system must be built completely from individual parts.
    The kit is recommended for advanced pilots.

    SKU: SG288R
    €469.00
    inc. VAT

     72HR STOCK
  • SAB GOBLIN FIREBALL Combo - HAVOK EDITION

    SAB GOBLIN FIREBALL Combo - HAVOK EDITION

    SAB GOBLIN FIREBALL Combo - HAVOK EDITION

    EASIER THAN EVER!

    Simplicity is the key feature of the Goblin Fireball
    The goal of the project was to design a simple model with, good performance that crashes well and is fast, simple and cheap to repair.

    For fun, for training, for HARD 3D it must be the Goblin Fireball!
    Registered design 003738210-0001/0004

    Main Feature

    • With the new-patented "Direct Drive" system, this has been achieved.
    • The reduced parts count delivers maintenance that has never been easier!
    • Carefully selected materials used in the soft plastic landing gear, plastic blade grips arms, hard steel shaft, strong plastic frames and a polycarbonate canopy and boom secure minimal crash damage and reduce repair bills.

    Features:

    • Main rotor diameter: 624 mm
    • Main blade length: 280mm
    • Tail rotor diameter: 139 mm
    • Tail blade length: 50 mm
    • Main shaft diameter: 5 mm
    • Tail shaft diameter: 3 mm
    • Weight including electronics: 735 gr

    Electronic Specifications:

    • Cyclic Servos: Micro size 23mm
    • Tail Servo: Micro size 23 mm
    • Speed Control 50-60A.
    • Typical battery setup: 6S 1000/1250 mAh

    Kit included:

    • Direct Competition Motor
    • Composite Canopy and Boom
    • Cyclic servos included ( 3x DS12C )
    • Tail servo included ( 1x DS12T )
    • ESC 60A included
    • 4 servo horn included
    • BL 280 mm main blades
    • 50 mm tail blades
    • Alu Blade grip arms
    • Alu Servo Support
    • Alu bell crank

    About the kit:
    SAB Goblin comes as a kit, the system must be built completely from individual parts.
    The kit is recommended for advanced pilots.

    SKU: SG285
    €474.00
    inc. VAT

     72HR STOCK
  •  SAB GOBLIN 3-BLADE THUNDER SPORT 700 HAVOK EDITION with Rotorblades

    SAB GOBLIN 3-BLADE THUNDER SPORT 700 HAVOK EDITION with Rotorblades

    SAB GOBLIN 3-BLADE THUNDER SPORT 700 HAVOK EDITION with Rotorblades

    Goblin Thunder Sport HPS 3 Havok Edition. Camouflage scheme, matte black CNC parts, 3 bladed head and tail!

    About the kit:

    • SAB Goblin comes as a kit, the system must be built completely from individual parts.
    • No electrical / electronic components included in the kit.
    • The kit is recommended for advanced pilots.

    General specifications:

    • Includes 60A SAB ESC
    • Includes 4 servos
    • Competition Motor HE015
    • Red aluminium blade Grips Arms
    • Red aluminium Bell Crank
    • Red Aluminium Servo Support
    • Yellow Havok Lighter FG canopy
    • Yellow Havok carbon-reinforced boom

    Havok new matte scheme

    • Main rotor diameter: 1582 mm with 690 mm size blades
    • Tail rotor diameter: 305 mm with 115 mm size tail blades
    • Air frame weight: 3000 g
    • Approximate weight RTF: 5400 grams
    • Cyclic servos: standard size (40 mm)
    • Tail servos: standard size (40 mm)
    • Typical battery setup: 12S – 5000 mAh (from 4500 to 5500)
    • Typical ESC setup: 160A Esc
    • Typical Motor setup: 520 Kw
    • Battery compartment: 60x58x350mm
    • Motor size: maximum 64 mm diameter, maximum height 64 mm

    Kit Includes:

    • Main and tail blades
    • Motor Pulley 21T
    • 2 sets battery tray
    SKU: SG708
    €879.00
    inc. VAT

     72HR STOCK
  • SAB GOBLIN 570 DRAKE EDITION (with main and tail blades)

    SAB GOBLIN 570 DRAKE EDITION (with main and tail blades)

    SAB GOBLIN 570 DRAKE EDITION (with main and tail blades)

    After successful Havok line, SAB decided to launch new Drake line on Goblin 700 and 570. Following Drake jet design, we realised an extremely attractive model.
    Havok is a 3-blade rotor head, Drake is a 2-blades rotor head, based on Goblin Sport version.
    Some details as white landing gears and tail fin will create a perfect color match!
    Our marketing would emphasize “the clash” between Havok and Drake, between 3-blades and 2-blades.

    The Goblin 570 Sport is an evolution from the original Goblin 570.
    The new Goblin 570 Sport features an "F3C style" landing gear, similar to the landing gear that comes with the Goblin Thunder Sport 700, as well as a more affordable canopy and boom in a great new scheme.
    Using a Drake matt graphic scheme from SABAVIO jets, the Goblin 570 Drake get an awesome look.

    Features:

    • Drake matt graphic scheme
    • Stronger Main Gear
    • Tail Bel Tensioning System
    • Stylish Fiberglass Canopy
    • Carbon Tail Boom
    • Stable wide landing gear, for safer landings and stable take offs. ( in the kits you can find black and white colors )
    • SAB TBS Main and tail blades are included
    • G10 mainframe delivers performance on a budget.
    • Compatible with the standard carbon frame to allow simple upgrading.

    Technical Specs:

    • Main rotor diameter: 1278 mm (with 570 mm blades)
    • Main blade length: 550 to 575mm
    • Tail rotor diameter: 260 mm
    • Tail blade length: 95 mm
    • Main shaft diameter: 10 mm
    • Spindle shaft diameter: 8 mm

    Kit Includes:

    • 21T motor pulley (other pulley sizes available)
    • 1 battery tray with straps
    • 570 mm main blades
    • 95 mm tail blades

    About the kit:

    • SAB Goblin comes as a kit, the system must be built completely from individual parts.
    • No electrical / electronic components included in the kit.
    • The kit is recommended for advanced pilots.

     

     

    SKU: SG575
    €628.00
    inc. VAT

     72HR STOCK
  • SAB GOBLIN 700 DRAKE EDITION with Rotorblades

    SAB GOBLIN 700 DRAKE EDITION with Rotorblades

    SAB GOBLIN 700 DRAKE EDITION with Rotorblades

    The Goblin Drake edition come from Goblin Sport 700
    Using a Drake matt graphic scheme from SABAVIO jets, the Goblin 700 Drake get an awesome look.

    • Main and tail blades are included
    • Fiberglass canopy weighing in at 230gm.
    • Carbon tail boom
    • Strong, proven HPS black matte head, perfect for all flight abilities and conditions.
    • Stable wide landing gear, for safer landings and stable take offs. ( black and white colors are included)
    • G10 mainframe delivers performance on a budget. Compatible with the standard carbon frame to allow simple upgrading.

    SPECIFICATIONS

    • Main and tail blades are included
    • DRAKE new matt graphic scheme
    • Main rotor diameter: 1558 mm with 690 mm size blades
    • Tail rotor diameter: 305 mm with 115 mm size tail blades
    • Air frame weight: 2670 grams
    • Approximate weight RTF: 5200 grams
    • Cyclic Servos: Standard size (40mm)
    • Tail Servo: Standard size (40mm)
    • Typical battery setup: 12S - 4800mAh, (from 3700 to 5500)
    • Typical ESC setup: 160A Esc
    • Typical Motor setup: 520 Kv
    • Battery compartment: 60x58x350mm.
    • Motor size: Maximum 64mm diameter, maximum height 64mm.

    Kit Includes:

    • Motor Pulley 21T
    • 2 Sets Battery Tray
    • SAB blades and tail blades ( 690 TBS + 115 TBS )

    About the kit:

    • SAB Goblin comes as a kit, the system must be built completely from individual parts.
    • No electrical / electronic components included in the kit.
    • The kit is recommended for advanced pilots.
    SKU: SG728
    €798.00
    inc. VAT

     72HR STOCK
  • KIT GOBLIN 500 SPORT LINE

    KIT GOBLIN 500 SPORT LINE

    KIT GOBLIN 500 SPORT LINE

    The Goblin 500 Sport line has been developed to provide the best performance for the best price.

    Stylish fiberglass canopy

    New carbon tail boom manufactured using an innovative lower cost process pushing the RRP down to RRP $56
    G10 mainframe delivers performance on a budget. RRP $19.5. Compatible with the standard carbon frame to allow simple upgrading.
    No blades included, giving you more freedom to choose your style and control your budge

    Ability to use medium and full-size servos

    • The structural plates are now made of a plastic material Zytel70G33L.
    • This change ensures a reduction of 48 grams in weight.
    • Main gear CNC H0423 (aluminum/delrin) in the basic kit
    • New Swashplate with high quality spherical bearing

     
    General Specifications:

    • Main rotor diameter:  1136 mm
    • Main blade length: 500mm
    • Tail blade length: 80 mm
    • Weight including electronics: 1880 g (excluding batteries).
    • 18T motor pulley included

    Electronic Specifications:

    • Cyclic Servos: Mid and Standard size (36 and 40 mm)
    • Tail Servo: Standards size 40mm
    • Typical speed controller: 100A
    • Maximum motor size: 52 mm diameter, 58 mm height
    • Flight Battery: 6S 3300/4500 mAh; Battery compartment: 50x54x180mm


    Kit Includes:

    • 18T motor pulley (other pulley sizes available)
    • 2 battery trays

     

    SKU: SG514
    €475.00
    inc. VAT

     72HR STOCK
  • Mikado Nitro GLOGO 690SX helicopter kit with VTX 697 blades

    Mikado Nitro GLOGO 690SX helicopter kit with VTX 697 blades

    This model has been designed and thoroughly tested by our Team Pilot Kyle Dahl, he has even flown it in competition already. The prototype took a respectable 5th place at this year‘s Global 3D, in a field dominated by top pilots with very powerful and capable electric models.
    Compared to other nitro helicopters of it‘s size, it is very light (from 4,100-4,350 g / 9.04-9.59 lb dry), which results in very good flight peformance for the given type of drive.
    The GLOGO 690 comes with a sleek and aerodynamic canopy which fits nicely between our electric helicopters, but has sufficient personality of it‘s own.
    The GLOGO 690 will not be offered as a conversion kit.

    Engines between 91 and 120 cu. in. can be used, together with a compatible muffler. Both has
    to be purchased separately.

    Mikado hasn’t had a model for the nitro market in 26 years, but the ultra light GLOGO 690 is the model worthy to bring NITRO back to MIKADO!

    THE benefits at a glance:

        Due to the plastic rotor blade grips, belt drive, and super light tail box, it makes the GLOGO 690 one of the (if not the actual) lightest Nitro model on the market.
        Because of the light belt drive and ultra light tail box, we did not have to use a larger main gear, or front mounted servos with bell cranks in order to attain proper CG.
        As a result of the small main gear, and direct control servos, we were able to make a very small and aerodynamic canopy which provides ultimate performance and looks for the model.
        Utilizes the Synergy XL Spec Clutch which provides no slip engagement even at very low main rotor RPM.
        One piece carbon side plates provide a stronger frame around the clutch stack area.
        Clutch stack is mounted using 8 x M3 bolts, providing very strong and perfect alignment.
        Designated wiring routes with frame grommets and zip tie slots, to take wires from the front of the model towards the rear.
        Large front battery tray allows space for the use of large RX batteries so you can fly all day without charging!
        Boom supports mounted with threaded rod and nuts, which allows you to service them without dismounting the muffler.
        Plenty of mounting places for auxiliary equipment such as remote glow drivers, back up guards, etc.
        The proven rotor head design has been in use on the LOGO 690 for nearly four years now. It is lightweight, and perfectly functional for this nitro model application.
        Recommended main rotor blade sizes are 650-700 mm, depending on your personal taste and style of flying.
        To power the GLOGO, you can use any nitro engine between the size of 91-120. In our testing we used OS91, YS96, and OS105 engines.
        In the beginning, there will be one gear ratio available: 8.15 with a 13 tooth pinion. In the future we may offer a 14 tooth pinion which will give a gear ratio of 7.57 for use with smaller 650 blades and higher RPM.
        The newly designed canopy of the GLOGO 690 combines the known and appealing design and visibility with fantastic aerodynamics: this helps especially with swift transitions within or between 3D maneuvers and big air aerobatics.
        Colored tail fins also help with visibility.
        Proudly partnered with Synergy Model Helicopters, to utilize their proven Fuel Tank, Fan, and Fan shroud, along with the Synergy XL Spec Clutch.
        With off-the-shelf components, an all up weight of 4.1-4.35 kg (no fuel) is possible, depending on your component choices.

     

    It utilizes tried and tested components from the existing LOGO 690 such as:

    • 106 T Herring bone gear which is quiet, strong, and efficient
    • aluminum swashplate with new geometry for quicker cyclic response
    • robust tail drive via HTD-belt, with aluminum drive pulleys
    • stronger blade grips with Ø 5 mm blade grip bolt
    • stronger free wheel for higher torque
    • reinforced clamp ring for main rotor shaft

    Specifications:

    • Rotor diameter 1,560 mm
    • Rotor blades e.g. VTX 697, Rotortech 690
    • RTF weight  4.100 - 4.350 g (dry)
    • Recommended batterie  rx-Lipo 2s-5,000 mAh
    • Main gear ratio 8,15
    • Main Gear size 106 teeth, modul 1
    • Length 1,300 mm
    • Hight 425 mm

    Content :

    • Manual
    • Illustrated Manual
    • Motor pinion 13 teeth
    • Blades CFK-Main Rotor Blades VTX697
    • Tail Blades CFK-Tail Rotor Blades
    • Canopy
    • Airbrush-Canopy

    Accessories:

    • Motor
    • recommended: Nitro Engine 90-120
    • VBar electronic
    • VBar NEO
    SKU: MIK-05227
    €1049.00
    inc. VAT

     PREORDER
  • Pixhawk Cube & Here2 GNSS GPS Combo

    Pixhawk Cube & Here2 GNSS GPS Combo

    Cube & Here2 GNSS GPS Combo

    Pixhawk 2.1 ‘The Cube’ Combo Pack- This is a Pixhawk 2.1 Standard Suite and the Here 2 GNSS in one box, from time to time we may supply them in separate boxes depending on stock – the product is the same.

    Description:
    Pixhawk 2.1 is an advanced autopilot system designed by the ProfiCNC and manufactured by HEX Technology.
    It features advanced processor and sensor technology from ST Microelectronics®, delivering incredible performance, flexibility, and reliability for controlling any autonomous vehicle.

    Key Features of Pixhawk 2.1:

    • Triple redundant dampened IMU
    • Heated system can be used in low temperatures
    • ample I/O ports
    • On-board battery backup for FMU and IO SRAM/RTC
    • Separate power supplies for FMU and IO
    • supports up to 3 GPS

    29 MEMS Sensors in the cube

    • 3x triple axis accelerometers
    • 3x triple axis gyroscopes
    • 3x triple axis magnetometers
    • 2x barometers

    Includes:

    • The cube (installed) Pixhawk 2.1
    • Full carrier board (standard version)
    • Here 2 GNSS
    • 1 x standard power brick (upto 8s, 30A)
    • Micro SD card (installed in Cube)
    • Mounting tape and screws
    • Cable Packl advantage of the Pixhawk 2, Please add the new GPS with built in Safety switch.

    Here 2 Features:

    • Built in STM32F302 MCU running ChibiOS to enable user defined features and easy firmware updates
    • Adds 10DOF IMU sensor (ability to run its own EKF solution onboard the GPS module)
    • CANBUS support

     

    SKU: HX4-06057
    €375.00
    inc. VAT

     LOW STOCK
  • T-Rex 600XN Metal Drive Gear Assembly

    T-Rex 600XN Metal Drive Gear Assembly

    Specification:

    • 600XN Metal Gear Assembly(L) x 1
    • 600XN Metal Gear Assembly(R) x 1
    • 700X Aluminum Hexagonal Bolt x 4(M3x36mm)
    • Socket Screw x 2(M3x12mm)
    SKU: H6NB017
    €79.00
    inc. VAT

     72HR STOCK
  • T-rex 600XN Bearing 6700ZZ (10x15x4mm) (2pcs)

    T-rex 600XN Bearing 6700ZZ (10x15x4mm) (2pcs)

    T-rex 600XN Bearing 6700ZZ (10x15x4mm) (2pcs)

    SKU: H6NR001
    €6.00
    inc. VAT

     72HR STOCK
More...
  • Agile 5.5 Helicopter Kit free Microbeast

    Agile 5.5 Helicopter Kit free Microbeast

    The Agile has been designed to offer something different, not just an improvement, but a step ahead of what is commonly done. The Agile was created to adapt to every type of flight: low to high speed, gentle maneuvers, Hard to 3D unimaginable level!
    Intelligent solutions have been used to provide high-end performance with very sensitive controls, giving a feeling of incredible strength while maintaining softness in movement.
    To ensure that nothing is left to chance and bring you the best overall design, hundreds of test flights were carried out by experienced drivers.
    Agile is agility AND quality, you can’t go wrong!
     
    Required to fly:

    • Main Blades: 550mm
    • Tail Blades: 85mm-95mm
    • Motor: 1100-1200Kv
    • ESC: 90A-120A / 6s
    • 3x Cyclic servos
    • 1x Rudder servos
    • Flybarless System- Microbeast included
    • 1x Lipo 5000 6S 45C
    • Transmitter and receiver

     Specifications:

    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE55BEAST
    €519.00
    inc. VAT

     LOW STOCK
    SALE
  • Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120LV, Savox servos, Blades

    Agile 5.5 Kit Super combo, Motor, YGE 120 LV, Savox servos, Blades

    Included items of this special combo

    • Agile 5.5 Helicopter Kit
    • Motor KDS 4020-1100
    • ESC YGE 120 LV
    • 4 servos Savox ( optional upgrade to RJX servos )
    • Carbon main and tail Blades
    • Flybaress  controler ( optional )

      Specifications of the Heli:
       
    • Length: 1120mm
    • Height: 350mm
    • Width: 176mm
    • Main Rotor Diameter: 1250mm
    • Main Blade Length: 550mm
    • Tail Rotor Diameter: 260mm
    • Tail Blade Length:92mm
    • Motor Pinion Gear: 21T
    • Motor KV: 1100KV
    • Main Drive Gears:(First Reduction) 21/54 (Second Reduction) 17/56
    • Tail Drive Gears:(Front)58/15 (Tail Shaft)16/16
    SKU: AGILE5.5COMBO
    €959.00 €1350.00
    inc. VAT

     LOW STOCK
    SALE
  • Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    Beam AvantGarde E6 V2 Flybarless helicopter Kit 600 size, Full CNC/metal

    This is the Beam AvantGarde 600 Class Electric Flybarless Helicopter Kit. This easily serviced helicopter features an innovative design that provides reduced weight and a low parts count. Other features include a quiet direct drive tail system, a fully serviceable CNC machined swash plate, heavy duty carbon fiber frames and much more, wrapped up inside a durable aerodynamic fiberglass canopy.

    Beam is 100% produced in Korea. no cheap parts, no bad bearings- all high quality!!

    One of the only kits allow choice of 6 and 12S lipos, where you beginner or competition pilot- this machine is for you.

    Features:

    • Innovative design allows for reduced wieght, easy servicing and low parts count
    • Durable canopy with aerodynamic design
    • Fully serviceable CNC swash plate
    • Triple bearing block design
    • Robust carbon fiber frames
    • Ultra quiet direct drive tail system
    • Turnbuckle pitch link design
    • Herringbone cut main gear & pinion gear design

    Specifications:

    • CNC full metal precision rotor head w/8mm spindle.
    • 11 tooth 6mm shaft size pinion, mod 0.8 (straight cut).
    • 100 tooth main gear, mod 0.8 (straight cut).
    • 4.0: 1 Tail Gear Ratio
    • Designed for power system up to 6S or 12S Li-Po
    • Carbon fiber frames for ultra-rigid and compact design
    • Easily serviceable engine maintenance
    • Triple bearing supported 10mm hardened main shaft
    • 120 degree dual race ball bearing metal swashplate
    • High quality DuPont® plastic injection mold w/strengthening fibers
    • Stainless steel damper mounted bearing torque tube for high efficiency
    • Top to bottom supported tail pitch plate for improved accuracy
    • Dual race ball bearing with thrust bearing supported tail blade grips
    • Front mounted rudder servo with push/pull bell crank
    • Carbon tail boom supports
    • Sleek Pre-painted fiberglass canopy
    • New lightweight landing gear
    SKU: BEAMAV600
    €399.00 €599.00
    inc. VAT

    SALE
  • BL Sport Heat Sinks 28mm

    BL Sport Heat Sinks 28mm

    Anodized Black 28mm heat sink will keep your brushed or brushless motor cool and efficient. The heat sink includes built in internal machined fins for maximum cooling and was specifically made for Helis so aircraft aluminum was used to keep weight to a minimum.
    SKU: SKU14483
    €3.00 €9.50
    inc. VAT

     IN STOCK
    SALE
  • CF Ferrar Blades

    CF Ferrar Blades

    Walt Ferrar Carbon Fiber Tail Blades are made for FP and CP Micro helicopters to improve tail controls and tail performance.Weight: 0.41 gramsUsage: Micro HelisFeatures: Length: 43mm or 48mmRoot Thickness: 2mm Mounting Hole: 2.00mm
    SKU: SKU6412
    €9.90 €18.00
    inc. VAT

    
    SALE
  • Fpv Complete set, Monitor, TX, Antennas, Camera

    Fpv Complete set, Monitor, TX, Antennas, Camera

     This is the set you will need to fly FPV,

    Set Included:

    • Diversity receiver monitor 7 or 10" ( choice) with built in Battery, Sunshade, Charger
    • Video-Audio 5.8 GHZ, 25mw receiver CEE approved
    • Set of Spyro Antennas, for TX, RX and Coil Antenna for Diversity receiver
    • 600-700TVL Sony CCD FPV camera

     

    SKU: FPVSET1
    €299.00
    inc. VAT

     LOW STOCK
    SALE
  • HTS-NAVI 2.4G WIRELESS TELEMETRY

    HTS-NAVI 2.4G WIRELESS TELEMETRY

    Description: HTS-NAVI HITEC 2.4 GHz Wirelss Telemetry Navigator Wireless download and display for essential telemetry information on your PC Compatiable with any radio fitted with Hitec AFHSS system Displayable telemetry information Receiver or Power Battery Voltage RPM Fuel Level Current Temperature Voltage GPS (Altitude, Distance, Latitude, Longitude, Speed, Direction and Trajectory) To monitor telemetry information, HTS-SS Sensor station and other concerned sensors are required. Download software for HPP-22 (Hitec PC programmer) to utilize HTS-NAVI.

    SKU: MTPX114007
    €29.00 €75.00
    inc. VAT

     LOW STOCK
    SALE
  • JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    JR Servo Extension 22AWG brown/red/orange flat wire 30cm- Special price

    Special price JR Servo Extension 22AWG brown/red/orange flat wire 30cm

    SKU: AM-2002
    €2.50
    inc. VAT

     IN STOCK
    SALE
  • Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute Rescue

    Sky-Hero professional Spyder 6 Hexacopter combo + FREE Opale Parachute. This amazing combo will make your flying experience unique, all in safety and for a very affordable price! This special offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    Sky-Hero professional Spyder 6 Hexacopter combo (AVH00-601Combo) including:

    1. Sky hero Spyder 6 frame set x 1( no canopy)
    2. Motor Avizar 3536-380KV
    3. ESC 40 amps
    4. Propeller 14"
    5. Distribution Board 100Amp
    6. Hardware to mount the motors
    7. Opale Paramodels Parachute
    SKU: XMAS21
    €1299.00
    inc. VAT

    SALE
  • Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights

    Sky-Hero Spyder 6 Hexacopter Kit w/ Pancake Conversion + Kylin CNC Alu Motor Mounts and LED Lights. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Semi professional Spyder 6 Hexacopter with Pancake (SKH00-601-PC)
    • 6x Kylin CNC aluminium Motor mount set
    • 2x Water Resistant LED Lights (ALULED-016)
    SKU: XMAS16
    €799.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers

    Sky-Hero Spyder 700 Kit + FreeABS Painted Canopy, LED Lights and Fluo Stickers and a 10% discount coupon for your next purchase. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700 Kit (SKH00-401)
    • ABS Painted Canopy
    • 2x Red Color LED Lights (ALULED-016R)
    • 2x White Color LED Lights (ALULED-016)
    • 2x High Fluorescent Stickers (SKU46635)
    • 10% saving coupon for your next order (coupon's details will be sent with the order)
    SKU: XMAS9
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set

    Sky-Hero Spyder 700mm Mutirotor Kit w/ FREE Pancake Conversion set. This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit (SKH00-401)
    • FREE Sky-Hero Pancake conversion set Spyder (SKH01-011)
    SKU: XMAS17
    €479.00
    inc. VAT

     72HR STOCK
    SALE
  • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame kit + Opale Paramodels Parachute rescue kit

    Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame + Opale Paramodels Parachute rescue Kit. This amazing combo will make your flying experience unique and for a very affordable price! This special Xmas offer is limited to stock availability. So order yours now to make a great deal!

    Included items of this special offer:

    • Sky-Hero Spyder 700mm Mutirotor X4/X8 Frame (SKH00-401)
    • Rescue Parachute for Sky-Hero Multicopters (OP17512)
    SKU: XMAS23
    €649.00
    inc. VAT

     72HR STOCK
    SALE
  • VBar NEO 6.1 Express- Only with Heli kit

    VBar NEO 6.1 Express- Only with Heli kit

    Save money on VBar NEO 6.1 Express, purchased only together with kit

    this item doesnt qualify for any double discounts

    SKU: MIK-49451
    €175.00
    inc. VAT

     LOW STOCK
    SALE
  • Wooden Blades 550 mm

    Wooden Blades 550 mm

    Low cost, and yet excellent product for Beginner and for Aerobatic practicing.
    Durable blades, made for 3-4 layers of quality wood, will deliver excellent performance without making holes in the pocket.

    Fits all 30-50 (550)size helis, length 550mm

    SKU: RCWB-550
    €10.00 €26.00
    inc. VAT

    SALE

Manufacturers

Latest Video

RC Market