Tail Boom

Tail Boom
AlignRc      



  Product rating
 
Review this product



SKU
H55031T
Availability
LOW STOCK

Your price
11.00   


Quantity

Pricematch
Apply for T-REX 550E

Specification:

Tail boom x 2(Φ20.3xΦ21.5x549mm)
Tail control guide x 2
Rudder control rod x 1(Φ1.96x575mm)
Ball Link x 2
  • 800MX Brushless Motor(440KV)

     800MX Brushless Motor(440KV)

    Product info HML80M04T
    Instructions:

    •  To meet the power and torque requirements of enthusiasts, the high output 800MX motor was born in Alignfs R&D lab. With dramatic increase in torque and power output, capable of 4440 watts continuous power output and 8800 watts of burst power!
    •  800MX features high efficiency, superior power, excellent torque, low current draw and low temperature; it's capable of maintaining consistent torque and head speed through continuous F3C maneuvers..
    •  Due to the 800MXfs high efficiency and low current draw, the standard equipment 120A electronic speed controller are sufficient to experience the power of this motor, and extend battery longevity.
    •  800MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    •  The 800MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
    •  Maintenance freeAhigh torqueAhigh efficiencyAstable, and low noise.
    •  Highspeed ball bearings, powerful magnetic outrunner rotor.
    •  Suitable For TREX 700E/800E F3C.


    Specification:

    •  Input Voltage:3S12S
    •  Max Continuous Current: 100A/200A(2sec)
    •  Max Output Power: 4440W/8800W(2sec)
    •  KV Value: 440KV
    •  Stator Arms: 12
    •  Magnet Poles: 10
    •  Dimension: Spindle 6x56.7x94.5mm
    • œWeight: 508g


    Accessories:

    •  Socket screw(M4X10)X4
    •  Washer(Ø4XØ10X1)X4
    •  4mm gilt terminal x 3


    SKU: HML80M04T
    €236.00
  • Goblin 630/700/770 Bearing 10x15x4 (2pcs)

    2 x High Quality ABEC-5 Bearings  Ø10 x Ø15 x 4 for Goblin 630/700/770

    SKU: HC420-S
    €6.00
  • MAH "Black Label" Flybarless Blades 465mm

    Mah “Black Label” or in Short name (MBL) blades have been developed especially for today’s flybarless systems and todays DFC heads. Mah Tested those blades before producing  with systems like BeastX, Skookum, GT, Mikado vbars, Spartan, Bavarian demon .Design made the blades very stiff,  prevent any unwanted oscillation and as well creating less flex for DFC heads.
    As known, the DFC head brings the blades closer to the tail boom, which can cause boom strike if the blades are flexible. Agility of MAH BL blades doesn’t allow this.

    Beginner or 3D competitor, those are the blades for you. Here are Some of the reasons why to get those blades:

    1- Great look, they fit all color schemes.
    2- They Fly great, Sharp response,Efficient- give your heli max time per Lipo
    3- Price is very decent for EU made product.
    4- Perfect balance, Static and Dynamic.

    Specification of blades:

    • Length: 465mm
    • Root: 9mm
    • Bolt Hole: 3mm
    • Weight: 72g
    • Width: 42m
    • Profile:Symmetrical, optimized for Flybarless helicopters

    SKU: MAH465
    €46.00
    OUT OF STOCK
  • Sky Eagle RTF 2.4GHz

    he tiny wingspan of 500mm makes it small enough to fly at your indoor hall, but the powerful brushed motor lets you take to the skies at the field or even your back garden!

    The entire body and wing assembly of the Sky Eagle are made from EPOFLEXY, and the robustness is incredible, almost as much as the prop unclipping itself in a crash so you can re-attach it and carry on your flight making this the ideal model for a beginner to pick up and have a go with, without the worry of expensive repairs.

    The Sky Eagle although only being 3 channel comes with a 4 channel 2.4GHz transmitter and is powered by a micro 2cell 7.4v 180mah Li-poly pack, giving 8-10 minutes of flight and is charged by the included mains balance charger.

    The all up flying weight of the Sky Eagle with the pre-installed electronics and once the battery has been fitted is only 65g.


    Wing span: 500mm
    Overall Length: 396mm
    Flying weight: 65g
    Power system: N50 Motor
    Battery: 7.4V 180mAH Li-PO
    Height: 131mm
    SKU: NE2009
    €79.00
*
*
*
Type the characters you see in the picture:


*
There have been no reviews


Seen same product priced lower elsewhere? Fill the form below (see also Terms & Conditions)



Name: *
Email: *
Telephone:  
Competitors Link: *
Competitors Price: * (Tax inclusive)
Comments:  

Terms & Conditions:

 
    I have read and understood the Terms & Conditions
Code:  
Enter Code: *
   
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: