Speed controller

Assortment of choice from Electric speed controllers, best quality money can buy

  • 15A Brushless ESC

    5-6V step-less adjustable BEC output allowing custom voltage setting to match servo specification.
    BEC output utilizing linear power system, suitable for 7.4-11.1V (2S-3S) Li battery, with continuous current rating of 2A, and burst rating of 3A.
    Three programmable throttle speed settings to support quick throttle response.
    Include soft start and Governor Mode.
    Small and compact PCB design for lightweight and simple installation.
    Large heat sink for optimum thermal performance.
    Highly compatible to work with 98% of all brushless motors currently on the market.
    Ultra-smooth motor start designed to run with all kinds of brushless motors.
    The power inlet utilizes a Japanese made "Low ESR" capacitor in order to provide stable power source.
    The throttle has more than 200 step resolution that provides great throttle response and control.

    Specification:
    Continuous current:15Amps
    Surge current:20Amps
    Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
    Supporting maximum RPM:2poles=>190,000rpm
    Supporting input voltage:5.5V~12.6V
    BEC output voltage: 5-6V step-less adjustment
    Supporting battery types: Li-Po 2~3 cells
    Size:42X24X9.3mm
    Weight:15g

    SKU: KX880003A
    €27.00

    IN STOCK 48H
  • BL Roxxy 908

    The 900 series is a further development of the proven ROXXY BL-800 series, and now offers a range of new functions which make these speed controllers equally suitable for use in model aircraft, boats and electric helicopters.

    The new functions:
    Programmable forward / reverse function, ideal for model boat applications.
    Governor mode, optionally programmable with or without speed regulator: perfect for micro and mini electric helicopters.
    Plug-in programming card for simple and unambiguous function set-up.

    Additional features:
    Can be set for use with in-runner and outrunner motors; LED indicator.
    Brake can be programmed on and off.
    High pulse frequency (32,000 Hz) for ultrafine speed control, e.g. for ""torque-rolls"".
    Integral temperature guard protects the controller from thermally induced damage.
    Designed for 6 .. 12 NC / NiMH or 2 ... 4 LiPo cells.
    Programmable low-voltage cut-off.
    Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
    Designed specifically to match the ROXXY series of BL motors, but can also be used with other brushless motors.

    Programmable basic functions:
    NC / NiMH or LiPo battery type
    Motor direction left, right, forward / reverse
    Brake On / Off
    Model type select: fixed-wing, boat or helicopter

    Specification:
    Weight: 12 g
    Momentary: 12.00 A
    Dimensions: 21 x 16 x 7 mm BEC: 5 Volt / max. 2 A

    more Specification:
    Auxiliary functions (only with the programming card,No. 8633)
    Cut-off voltage NC / NiMH:
    6 .. 7 cells = 0.9 V / cell
    8 ... 12 cells = 7.2 Volt
    2 LiPo: 5.5 Volt
    3 LiPo: 8.3 Volt
    4 LiPo: 11 Volt
    Cut-off mode
    Motor timing
    Acceleration
    Start power
    Brake power
    Governor (speed regulator mode)

    SKU: Robbe8627
    €29.00

    IN STOCK 48H
  • BL ROXXY 9100-6

    The outstanding feature of the newly developed 900-series of speed controllers is their versatility: they can be used in virtually all areas of modelling: as forward / reverse controllers for RC model cars and boats, as unbraked controllers for racing boats, as model aircraft speed controllers with variable brake, and even for electric helicopters - optionally with and without speed governor mode. The 900 generation of speed controllers can do everything - and at a very reasonable price.

    Specification:
    Weight: 67 g
    Momentary: 120.00 A
    Dimensions: 75 x 27 x 13 mm

    SKU: Robbe8635
    €115.00

    IN STOCK 48H
  • BL ROXXY 918

     The 900 series is a further development of the proven ROXXY BL-800 series, and now offers a range of new functions which make these speed controllers equally suitable for use in model aircraft, boats and electric helicopters.

    The new functions:
    Programmable forward / reverse function, ideal for model boat applications.
    Governor mode, optionally programmable with or without speed regulator: perfect for micro and mini electric helicopters.
    Plug-in programming card for simple and unambiguous function set-up.

    Additional features:
    Can be set for use with in-runner and outrunner motors; LED indicator.
    Brake can be programmed on and off.
    High pulse frequency (32,000 Hz) for ultrafine speed control, e.g. for ""torque-rolls"".
    Integral temperature guard protects the controller from thermally induced damage.
    Designed for 6 .. 12 NC / NiMH or 2 ... 4 LiPo cells.
    Programmable low-voltage cut-off.
    Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
    Designed specifically to match the ROXXY series of BL motors, but can also be used with other brushless motors.

    Programmable basic functions:
    NC / NiMH or LiPo battery type
    Motor direction left, right, forward / reverse
    Brake On / Off
    Model type select: fixed-wing, boat or helicopter

    Specification:
    Weight: 13 g
    Momentary: 22.00 A
    Dimensions: 21 x 16 x 7 mm BEC: 5 Volt / max. 2 A

    more Specification:
    Auxiliary functions (only with the programming card,No. 8633)
    Cut-off voltage NC / NiMH:
    6 .. 7 cells = 0.9 V / cell
    8 ... 12 cells = 7.2 Volt
    2 LiPo: 5.5 Volt
    3 LiPo: 8.3 Volt
    4 LiPo: 11 Volt
    Cut-off mode
    Motor timing
    Acceleration
    Start power
    Brake power
    Governor (speed regulator mode)

    SKU: Robbe8628
    €38.93

    IN STOCK 48H
  • BL ROXXY 940-6

     The 900 series is a further development of the proven ROXXY BL-800 series, and now offers a range of new functions which make these speed controllers equally suitable for use in model aircraft, boats and electric helicopters.

    The new functions:
    Programmable forward / reverse function, ideal for model boat applications.
    Governor mode, optionally programmable with or without speed regulator: perfect for micro and mini electric helicopters.
    Plug-in programming card for simple and unambiguous function set-up.

    Additional features:
    Can be set for use with in-runner and outrunner motors; LED indicator.
    Brake can be programmed on and off.
    High pulse frequency (32,000 Hz) for ultrafine speed control, e.g. for “torque-rolls”.
    Integral temperature guard protects the controller from thermally induced damage.
    Designed for 6 .. 18 NC / NiMH or 2 ... 6 LiPo cells.
    Programmable low-voltage cut-off.
    Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
    Designed specifically to match the ROXXY series of BL motors, but can also be used with other brushless motors.

    Programmable basic functions:
    NC / NiMH or LiPo battery type
    Motor direction left, right, forward / reverse
    Brake On / Off
    Model type select: fixed-wing, boat or helicopter

    Specification:
    Weight: 29 g
    Momentary: 40.00 A
    Dimensions: 56 x 25 x 10 mm BEC: 5 Volt/max. 3 A

    more Specification:
    Auxiliary functions (only with the programming card, No. 8633)
    Cut-off voltage NC / NiMH:
    < 7 NC = 5.5 Volt
    > 7 NC = 0.5 V / cell
    2 LiPo: 5.5 Volt
    3 LiPo: 8.3 Volt
    4 LiPo: 11 Volt
    5 LiPo: 13.7 Volt
    6 LiPo: 16.5 Volt
    Cut-off mode
    Motor timing
    Acceleration
    Start power
    Brake power
    Governor (speed regulator mode)

    SKU: robbe8631
    €58.02

    IN STOCK 48H
  • BL ROXXY 950-6

    he 900 series is a further development of the proven ROXXY BL-800 series, and now offers a range of new functions which make these speed controllers equally suitable for use in model aircraft, boats and electric helicopters.

    The new functions:
    Programmable forward / reverse function, ideal for model boat applications.
    Governor mode, optionally programmable with or without speed regulator: perfect for micro and mini electric helicopters.
    Plug-in programming card for simple and unambiguous function set-up.

    Additional features:
    Can be set for use with in-runner and outrunner motors; LED indicator.
    Brake can be programmed on and off.
    High pulse frequency (32,000 Hz) for ultrafine speed control, e.g. for “torque-rolls”.
    Integral temperature guard protects the controller from thermally induced damage.
    Designed for 6 .. 18 NC / NiMH or 2 ... 6 LiPo cells.
    Programmable low-voltage cut-off.
    Like all robbe speed controllers, these units are fitted with the usual protective and filter functions, including POR power-on guard and RX filter.
    Designed specifically to match the ROXXY series of BL motors, but can also be used with other brushless motors.

    Programmable basic functions:
    NC / NiMH or LiPo battery type
    Motor direction left, right, forward / reverse
    Brake On / Off
    Model type select: fixed-wing, boat or helicopter

    Specification:
    Weight: 29 g
    Momentary: 50.00 A
    Dimensions: 56 x 25 x 10 mm BEC: 5 Volt/max. 3 A

    more Specification:
    Auxiliary functions (only with the programming card, No. 8633)
    Cut-off voltage NC / NiMH:
    < 7 NC = 5.5 Volt
    > 7 NC = 0.5 V / cell
    2 LiPo: 5.5 Volt
    3 LiPo: 8.3 Volt
    4 LiPo: 11 Volt
    5 LiPo: 13.7 Volt
    6 LiPo: 16.5 Volt
    Cut-off mode
    Motor timing
    Acceleration
    Start power
    Brake power
    Governor (speed regulator mode )

    SKU: robbe8632
    €70.47

    IN STOCK 48H
  • BLS ESC-20A BEC Wasabi

    Sharp, sharper, WASABI!
    The high-quality brushless speed controller series WASABI brand Yuki model.
    These controllers are the first choice of model airplanes and RC helicopters with electric drive.

    Specifications Wasabi 20A

    Constant current: 20 A
    Peak current: 24 A
    Input voltage: 5-12 NiMH; 2-4 LiPo
    BEC output: 5 V/2 A
    Dim: 45 x 24 x 11 mm
    Weight: 19 g
    SKU: WASABI20A
    €28.00

    OUT OF STOCK

    Notify me when in stock

  • Brushless ESC Cooler Plate

    Apply for RCE-BL60G/70G/75G/100G Brushless ESC.
    ●High efficiency large surface area heatsink for ESC, to improve motor and BEC maximum output current by 15%.

    Specification:

    ●ESC cooler plate x 1(48x31x16mm)
    ●Heat shrink tube x 2(Φ28x10mm)
    ●Weight:15.4g
    SKU: K10476A
    €6.50

    LOW STOCK
  • Castle 10A BEC Switching Regulator

    Castle Creations 10A BEC Switching Regulator

    SPECIFICATIONS

    • Current Output:
    • Peak: 10 amps
    • Continuous:
    • <12 volts input = 7 amps*
    • <24 volts input = 5 amps**Ratings are determined with a 5mph airflow on the BEC. Servo connectors are not rated for current in excess of 5 amps. Users are encouraged to replace the connectors if more than 5 amp currents are anticipated.

    Output Voltage:

    • Output 5.1 volts out of the package, user may set output voltage from 4.8 to 9 using the Castle Link (sold separately).

    Input Voltage:

    • 5v to 25.2v (2S to 6S LiPo)
    Length:1.2” (30mm)

    Width:0.6” (15mm)
    Height:0.4” (10mm)
    Weight:0.4 oz (11 grams)

    SKU: CC-010-0004-00
    €29.00

    IN STOCK 48H
  • Castle Creations Phoenix Edge 120HV ESC

    Castle Creations Phoenix Edge HV 120 ESC 120A 12S 50V

    Applications

    • Helis:    550 Class, 600 Class, or 700 Class
    • Fixed wing:    giant scale

    Technical Specs
    Input voltage:    MIN: 3S LiPo MAX: 12S LiPo
    Max continuous amperage at full throttle:    120 amps*
    Size and Weight

    • Width:    2.0" (50.8mm)
    • Length:    3.3" (83.6mm)
    • Height:    0.9" (23.2mm)
    • Weight w/wires:    5.2 oz (148.8g)
    • Weight w/o wires:    2.4 oz (69.4g)

    Miscellaneous

    • Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software.
    • Castle Field Link Programming Card (sold separately) compatible for select functions.
    • Connectors:    Battery and motor connectors sold separately
    • Tools needed for installation:    Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.


    *RC HOBBY APPLICATION RATING: 120 amps for the duration of a single 10,000 mAh battery pack with the ESC in contact with a 5 mph airflow of 25C (77F) or cooler air. Controller temperature must never exceed 100C (212F). Exceeding current or temperature ratings may damage components and may shorten the life of the ESC. Always verify system current draw at full-throttle. Decrease load or increase airflow to decrease the ESC’s operating temperature.

    SKU: CC-010-0104-00
    €259.00

    LOW STOCK
  • Castle Creations Phoenix Edge 160HV ESC

    This is the Castle Creations Phoenix Edge HV 160 50V 160-Amp ESC. The next evolution in speed controller technology has arrived With the debut of the Phoenix Edge series ESC's. The Edge series features a user programmable auxiliary wire capable of functions modelers have only dreamed of, until now. The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock. Combined with the data logging capability the Edge series of controllers offer, users can enjoy unparalleled versatility.

    The Phoenix Edge HV 160 is intended for use in helicopters ranging from 700 to 800 size, and giant scale fixed wing aircraft. As always, the Edge series of controllers offer industry-leading software functions, data logging, and USB programming capability via Castle Link USB adapter (free with included coupon).

    Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software. Castle Field Link Programming Card (sold separately) compatible for select functions.

    Same Incredible Price
    The Phoenix Edge controllers deliver all of this while retaining the same astonishing prices as their predecessors.

    White Auxiliary Wire
    The white auxiliary wire can be used for helicopter governor gain input adjustments mid-flight, serve as an audible beacon after an “unexpected landing”, act as an RPM output for 3-axis gyros that support RPM sensors, be used as an ESC arming lock (coupon for free Arming Lockout Key included) or as a receiver arming lock.

    Phoenix Edge HV 160 Specs:

    •   Helis: 700 or 800 Class
    •   Fixed wing: Giant scale
    •   Technical Specs:
    •   Input voltage: MIN: 3S LiPo MAX: 12S LiPo
    •   Max continuous amperage at full throttle: 160 amps*
    •   Size and Weight:
    •   Width: 2.0" (50.8mm)
    •   Length: 4.3" (108.4mm)
    •   Height: 1.2" (31.5mm)
    •   Weight w/wires: 8.2 oz (232.8g)
    •   Weight w/o wires: 5.3 oz (150.6g)

      Connectors: Battery and motor connectors sold separately
      Tools needed for installation: Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.

    SKU: CSE010-0103-00
    €299.00

    LOW STOCK
  • Castle Field Link Programmer

    This is the Castle Creations "Air" Field Link Programmer. The AIR Field Link is compatible with nearly all Phoenix, Phoenix HV, ICE, ICE HV and Thunderbird controllers as well as CC BEC and CC BEC PRO BECs. Sometimes you need to make a change in the programming of a Castle controller and you just don't happen to have a laptop in your man purse. What to do? There's always the old stick programming method that we all love to hate. Yes it works, but...there has to be a better way. Now there is Field Link! Field Link allows you to modify the most commonly used settings in your Castle controller all at the touch of a single button. No computer needed (mostly). Simply connect the Field Link to the throttle lead of the controller and power the pair as described below. Click the button to scroll through and change the indicated settings. It doesnt get any easier! This card is also a Castle Link that allows access to the entire world of Castle tuning functionality.

    Does it work without a computer or not?
    Yes, mostly. The card is programmed to work with the latest controllers and software when it leaves the Castle workshop. It will work with all Castle Link compatible controllers running software released since 2007. Go to www.castlecreations.com for more details. There is always a chance that Castle will upgrade the controller firmware down the road and that upgrade may require that the Field Link be upgraded too. That is easily accomplished, but it will require a computer running the latest version of Castle Link that is always available for free on the Castle website. Castle will also be happy to upgrade it for you if you send it to them in the mail.

    Specific Usage Notes:

    • Thunderbird Controllers: Thunderbird controllers have fewer settings than may be represented on the Field Link. The Field Link will simply skip over these unsupported option rows.
    • CC BEC and CC BEC Pro: CC BEC and CC BEC Pro have adjustable output voltages only. Use the BEC VOLTAGE row on the Field Link to change their output value.
    • CC BEC: CC BEC does not supply output power when connected to the Castle Link or Field Link. It must therefore be powered with a Y harness for field use. The motor pack is not required for this specific setup.
    • CC BEC Pro: To use the Field Link you must use the adapter cable provided with your CC BEC Pro. Connect one side to the Field Link and the other side to the “Link Port” on your CC BEC Pro.

    Note: Field Link Card is capable of changing the following settings, however, the card cannot change settings on controller series that do not have these settings.

    • Cutoff voltage
    • Auto LiPo volts per cell (3.0, 3.1, 3.2, 3.3, 3.4, 3.5)
    • Low voltage cutoff type
    • BEC voltage setting
    • Motor timing
    • Motor direction
    • Throttle type
    • Brake
    • Governor gain
    SKU: CSEFPROAIR
    €29.00

    LOW STOCK
  • Castle Link Programming Kit

    Adapter for PC Interface with:

    Phoenix, Mamba, Barracuda, Phoenix HV and Thunderbird Brushless controllers View, change and customize program options Update ESC software via the Internet Compatible with Windows XP and Vista (32 and 64 bit) USB port required

    INCLUDES: One instruction sheet One USB connector One PHX link Interface

    REQUIRES: Internet ready PC with an available USB port

    SKU: CC-010-0005-00
    €28.00

    IN STOCK
  • Castle Phoenix Edge 50 32V 50-Amp ESC

    Castle Phoenix Edge 50 32V 50-Amp ESC w/5-Amp BEC 010-0102-00

    Helis: 450 class
    Fixed wing: .25 - .35

    Technical Specs

    • Input voltage: MIN: 2S LiPo MAX: 8S LiPo
    • Max continuous amperage at full throttle: 50 amps*
    • BEC voltage (voltage regulator for powering radio and sevos): User selectable choice from 5 to 8.4 volt output
    • BEC output amperage: 5 amp peak**

    Size and Weight

    • Width: 1.7" (43.4mm)
    • Length: 2.1" (53.3mm)
    • Height: 0.8" 21.4mm)
    • Weight w/wires: 2.5 oz (70.8g)
    • Weight w/o wires: 1.6 oz (45.3g)
    Program-ability:
    Fully programmable Castle feature set using Castle Link USB adapter (coupon for free Castle Link USB adapter included in package) and freely downloadable Castle Link Windows software.
    Castle Field Link Programming Card (sold separately) compatible for select functions.
    Connectors:
    Battery and motor connectors sold separately
    Tools needed for installation: Soldering iron and solder to attach bullets to motor wires and battery connector to power wires.
    SKU: CCEDGE50
    €89.00

    LOW STOCK
  • Castle Talon 90 Brushless ESC

    Fearture: 

    • Supporting 6S(25.2v)brushless motor. Max current : 90A
    • Max. BEC output :20 Amp, Continuous: 9 Amp
    • Users can adjust and choose the BEC output voltage as 6V or 8V by software
    • Ready to fly out of the bag, but users can tap into serious computing capabilities by connecting them to Castle Link software using a Castle Link or upcoming Field Link programming card.
    • Comprehensive heli feature set, including direct entry governor mode, autorotation with bailout, and soft start capabilities to protect your gearing (see the screenshot on the right for more details).

    Specification:

    • Input voltage: 3S to 6S (12V - 25.2V) 
    • Surge current : 90 Amps
    • Surge current : 140Amps(5sec) (with proper air flow and outer temperature is lower than 70°C)
    • BEC output voltage: Continuous current 20A; Burst current 9A
    • Supporting motor types:2 poles to 10+poles in/outrunner brushless motors
    • Max Supporting input voltage:25.2v(6s Li-Po/18 cells Nicad/NiMH)
    • Size:80X43X18mm
    • Weight:84.5g(With wires)

    SKU: HES09001
    €89.90

    IN STOCK
  • ESC 65A Brushless Controller

    65 AMPS ( 6s esc) for most applications. This ESC have a very flexible and broadly capable MCU, able to run all types of brushless motors.
    The large heatsink and simple PCB layout make heat dissapation consistant, enabling the to be run at its limit, without failure.


    Features & Specifications

    Input Volt: 6V - 24V
    Constant Current: 65A
    Max Current: 85A
    BEC: 3A
    Low-Voltage Cutoff: Auto detect and set
    Size: 56.0mm x 34.0mm x 11.0mm
    Weight: 71g ( Net Weight )
    High rate PWM
    Low resistence
    External Ubec 3A supplied with the ESC

    · User programmable brake
    · Low voltage auto setting based on battery
    · Throttle range self-adjusting
    · Soft start ramp up
    · Auto motor cutoff with reset
    · Runs motor in forward or reverse
    · Safe power arming program ensures motor will not run accidentally after turn on
    · Low torque start
    · Auto shut down when signal is lost

    SKU: KKESC65A
    €49.00

    LOW STOCK
  • Hacker X70-SB-Pro

    ESC Hacker X70-SB-Pro with heatsink

    Specification:

    Operating Voltage: 2-6 LiPo / 8-18NC
    Dimensions: 75x28x13mm
    Weight: 54g
    Operating Current: 70A
    Heli Mode: Yes
    USB-Interface: Yes, with USB-Interface
    BEC: Linear
    BEC-load: 2-6 Servos
    SKU: X70SB
    €99.00
    €139.00

    IN STOCK 48H
  • Heat Sink

    Our heatsink is ideal for adding custom heat sinks to your ESCs. Better heat dissipation allows your speed controllers FET chips to operate at a higher level of efficiency. Each heat sink can easily be cut to length with a standard hack saw. Each Sink also includes a thermal silica film (heat transfer film).
    All sinks are powder coated

    Specs:
    Material: AL6063-T5

    Availaible sizes ( please mention in the order comments on desired size)
    25x30mm
    25x80mm
    39x30mm
    39x80mm
    51x80mm

    SKU: RCMHSINK
    €3.90

    OUT OF STOCK

    Notify me when in stock

  • HELI JIVE 120+ HV

    The Jive Series of ESCs offer integrated shock resistant housing made from a specific poly amide protects the JIVE ESC from mechanical damage and makes it waterproof. The plastic material has been developed especially for injection molding of electronic parts without tensions or stress for the electronic components

    The name 120+ HV means that the Jive is capable of putting out 120 Amps continuous current right out of the box with zero modification. The huge cooling plate transfers all of the heat from the internals with great efficiency. With decent external cooling it is possible to increase the output of the Jive considerably. Installing a heatsink onto the Jive's built-in cooling plate will boost the cooling and help keep it running cool.

    Kontronik ESC's have a legendary reputation for having the most sophisticated & consistent properties of any ESC on the market. The built-in governor mode is simply the best ESC governor available - As long as your motor and battery are up to the task, a Kontronik ESC will govern the head speed flawlessly. Another amazing feature of Kontronik ESC's is their ability to automatically program themselves to mate with the motor that they are controlling. This guarantees the highest power and efficiency possible all the time, every time.

    Further highlights are waiting inside the new JIVE ESC. One of which is the unbelievably strong BEC which is adjustable between 5V and 6V with ProgCARD II or ProgDISC. It offers 5A continuous BEC current with 15A in peak. That's enough for all spectacular flight figures even in helicopters. To provide this power the JIVE ESCs have two PARALLEL BEC output jacks. It is necessary to use both BEC output jacks if you are using this ESC with high current servos, most specifically in a flybarless application.

    Due to a second processor it was possible to exceed the well-known JAZZ Software with some new leading features. For example the JIVE alarms the pilot after the flight, when it was used in overload regions in order to prevent a later malfunction.

    Specs:
    - Cell count: 5-12 Lipos
    - Operating voltage: 16-50V
    - Continuous Current: 120A
    - Max Current: without external cooling - 120A. With external cooling device such as a heatsink, the continuous discharge current can be greatly increased.
    - Max RPM with 2-pole-motor: ...to be defined...
    - Size: 62x32x21mm
    - Weight with cables: 140g
    - Cable cross-section: 4/6mm²
    - BEC current continuous: 5A
    - BEC current max.: 15A
    - BEC voltage: 5.5V

    Features:
    - Bail-Out
    - Manual throttle mode
    - Option to run the ESC on an external flybarless system
    - BEC adjustable with ProgCARD/ProgDISC: 5-6V
    - BEC short circuit protection
    - Auto Programming Mode
    - Stick positions programmable
    - Mode programming
    - ProgCARD ability
    - RPM Control
    - EMK brake can be disabled
    - EMK brake adjustable (for F3A)
    - Short circuit protection
    - False start protection
    - Current limiting
    - Over-temperature protection
    - Under-voltage cutoff
    - Under-voltage can be disabled
    - Under-voltage with automatic adjustment for NiCd / NiMH / Li-Ion / LiPo
    - Variable cutoff voltage / cell
    - Slow down instead of cutoff
    - Active freewheeling circuit
    - LED status display
    - Overload alarm
    - PWM frequency 8-32kHz
    - Total copper thickness 630µm
    - Reversible rotation direction

    SKU: KON-4620
    €419.00

    IN STOCK 48H
  • JCooler 120

    JCooler 120 for the kontronik Jive 120

    The all new unique cooling system for Kontronik Jive ESCs.
    After finishing the first prototypes, a lot of testing within extreme conditions e.g. at the IRCHA Jamboree 2011, we took the next step and finished the JCooler to the final product You see now.

    We created a cooling system which design, quality and efficiency is unparalleled. And we like to point out that all its components are 'Made in Germany'.

    easy installation
    Due to its sophisticated design the JCooler is simply mounted with four screws to the Jive ESC.

    best possible mounting options
    With the 4 CFRP mounting plate fasteners the JCooler can be simply mounted in any kind of model and also ensures rock solid support to the Jive ESC with simply 4 screws or cable ties.

    Included:

    1x aluminum heatsink (engraved & sandblasted)
    1x 50mm fan with 40cm power cord
    1x CFRP mounting plate
    2x machined spacers
    4x M3 lock nuts and countersunk screws
    1x JR plug
    1x thermal compound

    Specifications:

    JCooler 80 JCooler 120
    size (w x l x h) 50 x 50 x 48mm 50 x 50 x 52,4mm
    wight ap. 100g ap. 105g
    fan voltage 5,8 - 12,6V 5,8 - 12,6V
    power consumption ap. 70 mAh ap. 70 mAh
    power cable ap. 45 cm ap. 45 cm
    fits Jive 60
    Jive 80
    Jive 100
    Jive 120
    HeliJive 120
    SKU: JC120
    €50.00

    IN STOCK
  • JCooler 120 Black Edition

    JCooler 120 Black Edition for kontronic Jive 120/ Heli jive 120

    The all new unique cooling system for Kontronik Jive ESCs.
    After finishing the first prototypes, a lot of testing within extreme conditions e.g. at the IRCHA Jamboree 2011, we took the next step and finished the JCooler to the final product You see now.

    We created a cooling system which design, quality and efficiency is unparalleled. And we like to point out that all its components are 'Made in Germany'.

    easy installation
    Due to its sophisticated design the JCooler is simply mounted with four screws to the Jive ESC.

    best possible mounting options
    With the 4 CFRP mounting plate fasteners the JCooler can be simply mounted in any kind of model and also ensures rock solid support to the Jive ESC with simply 4 screws or cable ties.

    Included:

    1x aluminum heatsink (engraved & sandblasted)
    1x 50mm fan with 40cm power cord
    1x CFRP mounting plate
    2x machined spacers
    4x M3 lock nuts and countersunk screws
    1x JR plug
    1x thermal compound

    Specifications:

    JCooler 80 JCooler 120
    size (w x l x h) 50 x 50 x 48mm 50 x 50 x 52,4mm
    wight ap. 100g ap. 105g
    fan voltage 5,8 - 12,6V 5,8 - 12,6V
    power consumption ap. 70 mAh ap. 70 mAh
    power cable ap. 45 cm ap. 45 cm
    fits Jive 60
    Jive 80
    Jive 100
    Jive 120
    HeliJive 120
    SKU: JC120BE
    €59.00

    IN STOCK
  • JCooler 80

    JCooler 80 for the kontronik Jive 80

    The all new unique cooling system for Kontronik Jive ESCs.
    After finishing the first prototypes, a lot of testing within extreme conditions e.g. at the IRCHA Jamboree 2011, we took the next step and finished the JCooler to the final product You see now.

    We created a cooling system which design, quality and efficiency is unparalleled. And we like to point out that all its components are 'Made in Germany'.

    easy installation
    Due to its sophisticated design the JCooler is simply mounted with four screws to the Jive ESC.

    best possible mounting options
    With the 4 CFRP mounting plate fasteners the JCooler can be simply mounted in any kind of model and also ensures rock solid support to the Jive ESC with simply 4 screws or cable ties.

    Included:

    1x aluminum heatsink (engraved & sandblasted)
    1x 50mm fan with 40cm power cord
    1x CFRP mounting plate
    2x machined spacers
    4x M3 lock nuts and countersunk screws
    1x JR plug
    1x thermal compound

    Specifications:

    JCooler 80 JCooler 120
    size (w x l x h) 50 x 50 x 48mm 50 x 50 x 52,4mm
    wight ap. 100g ap. 105g
    fan voltage 5,8 - 12,6V 5,8 - 12,6V
    power consumption ap. 70 mAh ap. 70 mAh
    power cable ap. 45 cm ap. 45 cm
    fits Jive 60
    Jive 80
    Jive 100
    Jive 120
    HeliJive 120
    SKU: JC80
    €50.00

    IN STOCK
  • Jive 100+ LV

    The JIVE follows a concept that will convince you. Its functionality exceeds all you have ever heard about ESCs.

    High-tech unit
    It's integrated shock-resistant housing, made from a specific polyamide, protects the JIVE ESCs from mechanical damage and makes it waterproof. The plastic material has been developed especially for injection moulding of electronic parts.

    Power by coolness
    Noticeable is the huge cooling plate. It is perfectly connected with the power parts, provides good heat transfer and enables additional cooling to be realized. It is possible to raise the performance enormously by installing an additional air or water cooler system. The naming 80+ means: minimum 80 A. With a good extra cooler it is possible to increase to double power

    BEC records
    Further highlights are waiting inside, for example the strong BEC which is adjustable between 5 V and 6 V with PROGCARD II. It offers 5 A continuous BEC current with 15 A in peak.

    Special Features :

    • 6-25 V
    • 100 A continuous current 130 A Surge.
    • BEC 5A continuous current
    • 92g with cabels
    SKU: KON-4604
    €249.00

    OUT OF STOCK

    Notify me when in stock

  • Kontronik Cool Kosmik 200 HV ESC

    This is the Cool Kosmik 200+ HV which has an integrated heat sink
    If you love style and function, the Cool KOSMIK is made just for you. With an integrated fan combined with an active heat sink, you will find no better cooling solution available. You will immediately notice the stylish design of the integrated cooling plate, and will appreciate the active cooling fan in low airflow situations.

    COOL KOSMIK, a design that is made for the most demanding situations. COOL KOSMIK ESCs will have their own designated order numbers.

    • 5-14 Lipo, 20-59 V
    • 200 A continuous current
    • BEC 10 A continuous current
    • BEC 30A peak current
    • 108 x 53 x 44.5 mm
    • 250 g without cable

    SKU: KON-48201
    €739.00

    IN STOCK 48H
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: