Slash 4X4 VXL 1/16

SKU
TRX7009
Availability
IN STOCK 48H

   598
Your price
299.00   


Quantity


Available in Race Replica versions with officially licensed paint and graphics: Mike Jenkins Edition (Traxxas #47), Mark Jenkins Edition (Traxxas #25), Scott Douglas (AMSOIL®), or Greg Adler Edition (4 Wheel Parts)
Ready-To-Race® with included 6-cell NiMH Power Cell battery and charger
30+mph with included NiMH battery, 50+mph with additional NiMH battery
TQi 2.4GHz Radio System
Revo suspension technology for superior handling and control
Full-time 4WD
Velineon® 380 brushless motor—largest in class
Waterproof electronics
Torque-control™ slipper clutch
Sealed differentials
Realistic all-terrain tires with foam inserts
Traxxas High-Current Connector
Metric hex hardware
Rubber sealed ball bearings

Traxxas Slash set the standard short-course fun and versatility, then Slash 4X4 raised the bar on short-course performance with category-making speed, power, and track-ready handling. Now you can experience the fun of wheel-to-wheel Slash 4X4 racing 1/16 scale—with Velineon brushless power and full-time 4WD! At 14 inches long, the 1/16 Slash 4X4 VXL is about half the size of the 1/10-scale Slash 4X4. But don't call it a "mini"—this is a whole new category of R/C performance and fun that no mere mini-model can match. Short-course styling that captures the attitude of the full-size Traxxas TORC-series racer is just the beginning. Beneath the Race Replica polycarbonate shell, you'll find the winning suspension technology of the eight-time National Champion Traxxas Revo®, screaming Velineon® brushless-motor power, and the convention-busting innovation of the E-Revo.
  • Ball Link Set

    Ball Link Set 18pcs

    SKU: BMH423013
    €3.00
    €2.90
  • Blade 500 X BnF

    •     Spektrum AR7200BX DSMX receiver with integrated BeastX flybarless technology
    •     425mm carbon fiber main blades
    •     Single-piece, carbon side frames
    •     CNC-machined aluminum head block
    •     CNC-machined aluminum swashplate
    •     Triple ball bearing-supported, hardened steel main shaft
    •     Spektrum S310 digital servos with S410G digital tail servo
    •     E-flite 520H 1320Kv brushless motor
    •     E-flite 6S 22.2V 2900mAh 30C Li-Po battery
    •     E-flite 70A S-BEC speed control
    •     Aluminum tail boom
    •     Belt-driven tail rotor with thrust bearings in the grips
    •     Weighted tail blade hardware
    •     This model is one of the many available for the Phoenix RC Flight Simulator

    The Only Item Needed To Fly This Helicopter Is A Spektrum 6 Channel Or Higher Transmitter

    The Blade 500 X BNF combines flybarless technology with the convenience of Bind-N-Fly to provide a 500-class electric helicopter that's ready to dominate the sky in the time it takes to charge the battery. Simply attach the main blades, bind it to a compatible Spektrum DSMX Transmitter and charge the battery and you're set for a super responsive flight with unrivalled authority, power and precision to perform exhilarating and incredible 3D manoeuvres that almost defy the laws of physics and comprehension.

    Flybarless technology enables higher head speeds and reduced disc loadings for improved rotor response and agility but it's the groundbreaking Spektrum BeastX 3-axis MEMS stabilization system that makes flybarless flying characteristics more accessible for every pilot due to its ease of set-up and adjustment and it's complex 3-axis control algorithms. BeastX, when coupled to a full range Spektrum compatible DSMX transmitter such as the awesome DX8 or DX7S rewards the performance helicopter flyer with unrivalled control ability and an 'in-touch' experience that is so reactive that it's almost neural in its response.

    Control is only one part of the equation though and matching up to the demands of the experienced 3D pilot, the Blade 500 X comes equipped with a powerful E-Flite 520H brushless 1320Kv motor and a whopping 2900mAh 6S 22.2V drive battery to ensure that the Blade 500 X has all the power required to totlly dominate the air, thus rewarding the experienced heli pilot with the flight of their lives.

    Product Specifications

    • Type: 500-class electric collective pitch flybarless helicopter
    • Main Rotor Diameter: 38.2 in (970mm)
    • Tail Rotor Diameter: 7.8 in (198mm)
    • Gross Weight: 3.88 lb (1.76 kg)
    • Length: 33.5 in (850mm)
    • Main Gear Ratio: 9.6:1
    • Tail Ratio: 1:4.66
    • Kit/ARF/RTF: BNF
    • Rotor Blade Length: 430mm Revolution carbon fiber main blades
    • Minimum Age Recommendation: 14 years
    • Experience Level: Expert
    • Recommended Environment: Outdoor
    • Is Assembly Required: No

    SKU: BLH4080
    €630.00
  • Cooling head, PowerTune ( …

    Cooling head, PowerTune (machined aluminum, blue-anodized) (TRX 2.5 and 2.5R)/ head protector (plastic)
    SKU: TRX5237
    €35.95
  • Flammas/Carbon look Fiberglass Canopy Sky Hero Spy

    Flammas Airbrush Fiberglass Canopy Sky Hero Spy

    Be different with our new canopy specially designed for Sky Hero Spyder. A whole new look and more visibility for your copter with a cool design at a affordable price. Dont be the same, be different .
    Fly it your style.
     
    Fusuno canopies are made with highest quality resin and fiberglass material to provide strong but flexible canopies. It helps prevent cracks that is normally seen in other canopies that are using lower quality material. All paints and clear coat are automobile grade provide great look, Great design at bargain price.

    SKU: FUC-SPY-001
    €59.00
*
*
*
Type the characters you see in the picture:


*
Please Sign in or register to post a price match request.
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: