Night Flying

Night Flying equipment is very important. Using non reliable products can cause your model stop to be seen and loose it in the dark. Our Night Flying products are made in Europe, and made for highest outdoor standards.
Our Wires are Hi Lum, what means very high light output compares to other wires. We are selling the best products and still for very fair price.
  • 36 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    36 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    Specification:

    • Beam angle: 120°
    • Power consumption: 1.7W
    • Voltage: DC 12V
    • Lumens: 140-160LM
    • SMD : 3014 (36 LED)
    • Size: 30 (dia) x 41mm (total lenght)
    Material:

    • Composite
    SKU: G4-B36LED-2W
    €5.00

    IN STOCK
  • 24 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    24 Bright white circle LED 2W DC12V. 140-160LM (1pc)

    Specification:

    • Beam angle: 120°
    • Power consumption: 1.7W
    • Voltage: DC 12V
    • Lumens: 140-160LM
    • SMD : 2835 (24 LED)
    • Size: 30 (dia) x 40mm (total lenght)
    Material:

    • Composite
    SKU: G4-B24LED-2W
    €4.00

    IN STOCK
  • 5 Bright white LED 5W DC12V. 140-160LM (1pc)

    5 Bright white LED 5W DC12V. 140-160LM (1pc)

    Specification:

    • Beam angle: 360°
    • Power consumption: 1.5W
    • Voltage: DC12V
    • Lumens: 140-160LM
    • Size: 25x13mm
    Material:

    • Aluminum cage
    SKU: G4-5A-5W
    €6.90

    IN STOCK
  • 5 Bright white LED 7.5W DC12V. 180-200LM (1pc)

    5 Bright white LED 7.5W DC12V. 180-200LM (1pc)

    Specification:

    • Beam angle: 360°
    • Power consumption: 2.2W
    • Voltage: DC12V
    • Lumens: 180-200LM
    • Size: 35x19mm
    Material:

    • Aluminum cage
    SKU: G4-6A-7.5W
    €9.90

    IN STOCK
  • Bright white circle LED 1W DC12V. 70-80LM (1pc)

    Bright white circle LED 1W DC12V. 70-80LM (1pc)

    Specification:

    • Beam angle: 180°
    • Power consumption: 1W
    • Voltage: DC12V
    • Lumens: 70-80LM
    • Size: 25 (dia) x 15 (H) x 15mm (total lenght)
    Material:

    • Aluminum cooler
    SKU: G4-Dish-2W
    €3.00

    IN STOCK
  • Bright white LED 1.5W DC 12V. 6000k (1pc)

    Bright white LED 1.5W DC 12V. 6000k (1pc)

    Specification:

    • Beam angle: 80°
    • Power consumption: 0.7W
    • Voltage:DC 12V
    • Lumens: 55-65LM
    • Size: 25x11mm
    Material:

    • Aluminum cage
    SKU: G4-5A-1.5W
    €3.00

    IN STOCK
  • Drones & Multicopters 24 LED Bright Blue Light Spotlight For Night Flying

    This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

    • Light Color: Blue
    • 30mm diameter- easy placed, and also can be put in certain motor mounts.
    • Light visible till 300 Meters
    • Power supply: 11-12v, Balancer 3s connector.
    • Weight: < 5 gr
    SKU: SLLBLUE
    €7.00

    IN STOCK
  • Drones & Multicopters 24 LED Bright White Light Spotlight For Night Flying

    This 24 Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

    • Light Color: Cool White
    • 30mm diameter- easy placed, and also can be put in certain motor mounts.
    • Light visible till 300 Meters
    • Power supply: 11-12v, Balancer 3s connector.
    • Weight: < 5 gr
    SKU: SLLB
    €7.00

    IN STOCK
  • Hight powerful LED headlamps with large reflectors

    Hight powerful LED headlamps with large reflectors.

    This set contains 2 High Power super-bright LED's and reflectors.
    High efficiency and low rate of consumation: 0.5A
    The lights can be turned ON & OFF via a free channel on the receiver.
    They are suitable for R/C Aircraft, Helicoper, Multicopters, cars and boats.

    Data:

    Operating voltage: 2S LiPo (7.4V) via the JST-XH balance connector
    JST-XH connector operating voltage range: 6.5V -8.4V DC
    Control voltage input from receiver: 5.0V DC Maximum

    Specifications:

    • LED Housing dia.: 22mm
    • LED Housing depth: 21mm
    • JST-XH (2S) wire lenght: 180mm
    • Control/Receiver) wire lenght: 300mm
    • Control to LED wire lenght: 200mm
    • Power: up to 500mAh duration
    • Size of the control unit:: 30 x 12 x 10 mm
    SKU: C6860
    €16.90
    IN STOCK 48H
  • Led Strip SMD

    Led Strip, with powerful SMD leds, can be glued any where. Popular on Night flying machines, Quad copters, and more.

    Comes with adhesive material, can be cut each 5cm.

    Dimensions: 8mm width SMD Flexible strip series, 60LEDs/meter

    Available colors- White, Red, Yellow, Blue, Green .
    Sold per 1 Meter.

    SKU: LEDSTRIPRED
    €8.00

    IN STOCK

  • Lighting ready set with 8 Hight Power LEDs

    Lighting ready set with plug & with 8 Hight Power LEDs
    For model planes and helicopters

    Specifications:

    • Operating voltage: 4 - 6V (or 2S LiPo)
    • Current: 1200mA
    • Dimensions of the control unit: 55 x 55 x 10 mm
    • colored 5mm LED's (bright, flashing)


    SKU: C6858
    €42.90
    IN STOCK 48H
  • Lighting ready set with plug & with 8 highly competitive LEDs

    Lighting ready set with plug with 8 highly competitive LEDs, ideally for flight models, Helicopter and Multicopter!

    Simply connect the LED cables finished with plug with the LM-1 tax unity and connect whole with a power source of 4-6 volts (e.g., on a free output socket).

    Extent of supply:

    Tax unity LM-1 2 x white LED (shining) 1 x green LED (shining) 1 x red LED (shining) 2 x white LED (stroboscopic shining) 2 x red LED (slowly shining)
    Small parts, manual German / English

    Technical data:

    • Input voltage = 4.0-6.0V
    • Current admission = 30 mA
    • Dimensions (LM-1) = 34 x 26 x 12 mms
    • Dimensions LED = 5 mms (diameter), (9-mm construction)
    • Weight(Importance) (LM-1) = 9 gs / complete set cable with LED = 19 gs
    • Cable length LED = 600 mms (extendable)
    SKU: C6857
    €22.90
    IN STOCK 48H
  • Night Flying Glowsheet Kit

    Great for making your own lighted signs. Sheet comes as Square of 10x10cm , or Round shaped diameter of 8cm.
    Kit comes with 6-12 volt driver . Best is to connect  Small lipo 2-3 cells, or attach to Balancer of large lipo and use 2-3s from this source.
    You can attach the sheet to  Drone, heli, or on the boom and fly in the dark.
    Alternatively, Print your name, stick on the sheet and it will glow in the dark,
    turn on and you have a beautiful lighted sign!

     
    Pictures of the shapes can be seen in Detailed images.

    One driver can feed up to 3 sheets.
    Set include 1 Glowsheet and one Driver
    SKU: RCM20453
    €13.00

    IN STOCK

  • Night Flying set

    Complete set includes two (2) Hi-Lum contrasting glow wires of 1 meter long, and Double glow wire Driver.
    All connectors are pre installed , just add your small lipo 2s 300-1000mh


    That all you need, and it's ready to fly.
    The dual controllers increase brightness significantly.

    SKU: RCM15544
    €35.00

    IN STOCK
  • Night Wire 1 Meter

    High-intensity light wire that glows strong at night.
    The driver ( a tiny black box ) can power up to three light wires each measuring at 1-2 meter long and can run for about 4 hours on a battery, recommended to use 2-3s Lithium.
    The Cool lights produces no heat and very flexible and bendable so you can wrap it over the Helicopters boom, canopy and other surfaces.
    Shake proof, impact proof and very versatile each install cold wire produces no electromagnetic wave so it will not interfere with the Helicopter’s receiver signals which is very important.

    Our Night Wires are especially produced for Military Night Flying, and used on many UAV's and other applications where most of reliability needed.
    Those Wires are produced in Europe, and producing 25% more illumination compared to their competitors. And all this without extra consumption of power. very high efficiency
    Thicknesses of 2.5mm, flexible and 1 meters Long.
    You will need converter(Driver) and Battery 7.4-12v.

    SKU: NIGHT1MBM
    €5.00

    IN STOCK

  • Night Wire 2 Meters

    High-intensity light wire that glows strong at night.
    The driver ( a tiny black box ) can power up to three light wires each measuring at 1-2 meter long and can run for about 4 hours on a battery, recommended to use 2-3s Lithium.
    The Cool lights produces no heat and very flexible and bendable so you can wrap it over the Helicopters boom, canopy and other surfaces.
    Shake proof, impact proof and very versatile each install cold wire produces no electromagnetic wave so it will not interfere with the Helicopter’s receiver signals which is very important.

    Our Night Wires are especially produced for Military Night Flying, and used on many UAV's and other applications where most of reliability needed.
    Those Wires are produced in Europe, and producing 25% more illumination compared to their competitors. And all this without extra consumption of power. very high efficiency
    Thicknesses of 2.5mm, flexible and 2 meters Long.
    You will need converter(Driver) and Battery 7.4-12v.

    SKU: NIGHTW2M1
    €8.00

    LOW STOCK

  • Night Wire driver

    Driver box from 7-12v . up to 3 Night Wires can be connected to this box, providing you with the best lumination for night flying.
    This driver comes with 2 connectors for wires.
    Small size 27 x 28 x 27 mm and lightweight - less then 10 grams make this driver a perfect solution for Night flying.

    Connect 2- 3s lipo/Li-on, or 9V battery and you have Hours of continious night flying. 80ma consumtion only.

    SKU: SKU14206
    €10.00

    IN STOCK
  • Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    Quad Bright White LED 3-Mode 8000-9000K Water-resistant. (1pc)

    • Used for a drone
    • Suit for a tube which dia is 15-30mm
    • Waterproof and 3 working modes
    • 2x2032 battery
    • Product weight:22g
    • Cool design suit for riding at night
    Material:

    • 100% nature friendly grade silicone,non-toxic
    • RED Aluminum anodized

    SKU: ALULED-017
    €19.00

    IN STOCK
  • Quad Cool Red LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    • Housing Color: Red, Light color- Red
    • Material    Aluminum Alloy + Plastic
    Construction:

    • Water Resistant    Yes
    • Electronic Components
    • Output Current    60 mA
    • Flashlights
    • Flashlight Modes :2, Hi > Strobe
    • Switch Type    Forward Click
    Power & Batteries:
    • Batteries Included    Yes
    • Battery Form Factor    CR2032
    • Estimated Usage Time  3-6 hours
    Dimensions:
    • Depth    34.6 mm
    • Height    112 mm
    • Width    27.6 mm
    • Product Weight    28 g
    SKU: ALULED-016R
    €9.00

    IN STOCK
  • Quad Cool White LED 20LM 2-Mode 7500-8500K Water-resistant. (1pc)

    A super bright LED  light set with high grade lenses and precision CNC machined aluminum body. With continuous and flashing modes, simple operation and tool-less mounting, The professional LED light is essential for night flying and good visibility.

    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    • Housing Color:black, Light color- White
    • Material    Aluminum Alloy + Plastic
    Specification:

    • Light Source Type    LED
    • Light Source Color    7500-8500K
    • Lumens (Max)    20 LM
    Construction:

    • Water Resistant    Yes
    • Electronic Components
    • Output Current    60 mA
    • Flashlights
    • Flashlight Modes    Hi > Strobe
    • Mode Count    2
    • Mode Memory    No
    • Switch Placement    Head
    • Switch Type    Forward Clicky
    Power & Batteries:

    • Batteries Included    Yes
    • Battery Form Factor    CR2032
    • Estimated Usage Time    3-6 hours
    Dimensions
    • Depth    34.6 mm
    • Height    112 mm
    • Width    27.6 mm
    • Product Weight    28 g
    SKU: ALULED-016
    €9.00

    IN STOCK
  • Quad-Heli Front Led Light round BLACK (1pc)

    This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

    Color: Black

    2 Modes: Constant or Flashing. To change mode simply press down on the led until it clicks.

    Weather proof. perfect for Quads, Helicopters, Easy clip attachment for tubes 20-36mm

    SKU: LEDLIGHTROUND-BLK
    €8.00

    IN STOCK
  • Quad-Heli Front Led Light round RED (1pc)

    This Silicone Led Light will help you to differentiate the front from the rear of your model, in the night or when you are far of it.

    Color: RED

    2 Modes: Constant or Flashing. To change mode simply press down on the led until it clicks.

    Weather proof. perfect for Quads, Helicopters, Easy clip attachment for tubes 20-36mm

    SKU: LEDLIGHTROUND-RED
    €8.00

    IN STOCK
  • RotorTech 105mm Carbon Fiber LUMINOUS NIGHT Tail Blades

    RotorTech 105mm Carbon Fiber LUMINOUS NIGHT tail blades

    Features:

    • Carbon fiber tail blades.
    • Uses LED type lights.
    • Lights turned on with centrifugal force.
    • Powered by easily replaceable lithium cell button batteries.

    Specifications:

    • Length: 105mm
    • Width: 30mm
    • Root: 5mm
    • Weight: 6.9g
    • Bolt hole: 3mm

    Includes:

    • One pair of luminous tail blades.
    • Two CR-1225 3V lithium cell button batteries preinstalled into blades.
    • Two spare CR-1225 lithium button cell batteries.
    • Four 3x10x1.5mm tail blade spacers.
    • Two fish lines (battery removal tool).
    • One instruction manual.


    SKU: H1059C-L
    €52.00

    IN STOCK
  • RotorTech 110mm LUMINOUS NIGHT tail blades

     RotorTech 110mm LUMINOUS NIGHT tail blades

    • Uses LED type lights.
    • Lights turned on with centrifugal force.
    • Powered by easily replaceable lithium cell button batteries.
    • Specifications:
    • Length: 110mm
    • Width: 32mm
    • Root/Grip: >= 5mm
    • Weight: 7g
    • Bolt hole: 3mm
    • Includes:
    • One pair of luminous tail blades.
    • Two CR-1225 3V lithium cell button batteries preinstalled into blades.
    • Two spare CR-1225 lithium button cell batteries.
    • Four 3x10x1.5mm tail blade spacers.
    • Two fish lines (battery removal tool).
    • One instruction sheet.
    SKU: H-1109C-L
    €55.00

    OUT OF STOCK

    Notify me when in stock

English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: