FPV Planes

here you can findFPV- UAV airplanes and helicoters which designed for UAV and aerial photography
  • E-Flite FPV Vapor RTF W/ Fat Shark Teleporter V4 headset


    E-Flite FPV Vapor RTF W/ Fat Shark Teleporter V4 headset

    Key Features:

    • Completely built, flight ready airframe
    • Spektrum™ VS1100 ultra micro FPV system
    • Fat Shark Teleporter V4 headset with digital head tracking
    • Full-color QVGA 320 x 240 LCD headset displays
    • SpiroNET circular polarized antenna system
    • 150mAh 1S 3.7V Li-Po battery and USB 1S Li-Po charger
    • 760mAh 2S 7.4V Li-Po headset battery and AC charger
    • Ultra-lightweight, film-covered carbon fiber airframe with modular construction
    • Spektrum 3-channel DSMX® receiver/ESC/Servo unit
    • Fully proportional throttle, elevator and rudder control
    • 4-channel 2.4GHz DSMX transmitter
    • No FCC license required
    Overview

    If you’ve ever imagined yourself in the pilot seat of a great flying RC airplane, the E-flite® FPV Vapor® model can make your dream a reality. Poised at the optimal point on the aircraft, a tiny video camera sends full-color, real-time action back to you on the ground. The view is so immersive that you’ll feel as though you’re actually sitting in the pilot’s seat of the model airplane. Plus, the FPV Vapor ultra micro aircraft is small enough to enjoy in many large indoor spaces, such as a gymnasium or even outdoors in your own backyard. The ultra-lightweight design, combined with its efficient motor system, allows the airplane to have outstanding handling even when it’s flown at slow speed. Which means you can experience First-Person View Flight virtually anytime and anyplace.

    You can have the Ready-To-Fly version up in the time it takes to charge the batteries. The Spektrum™ VS1100 ultra micro FPV system is fully installed on the airframe and a Fat Shark Teleporter V4 headset is included. The only thing you have to do to experience FPV flight is charge the batteries.

    Fully Assembled Airplane
    The UMX FPV Vapor features a completely built, flight ready airframe that’s ultra-lightweight with film-covered carbon fiber construction and modular components that make any necessary repairs easy to complete. The airplane comes equipped with an all-in-one Spektrum 3-channel DSMX receiver/ESC/servo unit.

    FPV System
    The UMX FPV Vapor has the Spektrum™ ultra micro FPV camera already installed. It’s a 2-in-1 camera/transmitter unit that features a circular polarized antenna for superior range performance and is powered off the E-flite ultra micro 150mAh 1S 3.7V 25C Li-Po flight battery included.

    FPV Headset
    The RTF version of the UMX FPV Vapor includes the feature rich Fat Shark Teleporter V4 FPV headset. Worn like a set of goggles, inside the headset is a pair of full-color QVGA 320 x 240 LCD displays that receive a wide field of view from the camera onboard the Vapor FPV. The included 5.8GHz SpiroNET circular polarized antenna system has amazing reception. Best of all, the Teleporter V4 FPV headset includes 2-axis digital head tracking that senses your head movement to deliver an even more immersive view point.

    Flight Transmitter
    The RTF version includes a 4-channel 2.4GHz transmitter with Spektrum™ DSMX® technology that delivers fully proportional throttle, elevator and rudder control.

    Batteries and Chargers
    The RTF version of the UMX Vapor FPV includes all the batteries you need to fly as soon as possible, including the AAs for the transmitter. The Fat Shark Teleporter V4 headset operates from a 760mAh 2S 7.4V Li-Po battery for long play times and can be recharged using the included AC charger. Both the aircraft and airborne FPV system operate from the same ultra micro 150mAh 1S 3.7V 25C Li-Po battery that can be recharged with the included USB 1S Li-Po charger.

    Motor & Propeller
    The proven UMX Vapor FPV micro electric drive features a brushed 6.0mm coreless motor that’s geared to efficiently power a 140mm x 45mm propeller. The transparent propeller allows the image quality to be less obstructed.

    Product Specifications:

    • Wingspan:    14.8 in (376mm)
    • Overall Length:    15.3 in (389mm)
    • Wing Area:    79.0 sq. in. (5.10 sq. dm.)
    • Flying Weight:    24.0 grams (0.84 oz)
    • Motor Size:    Micro Electric
    • Radio:    MLP4DSM 4-channel DSMX transmitter (included)
    • Prop Size:    140mm x 45mm
    • Speed Control :    Brushed ESC (included)
    • Recommended Battery:    3.7V 1s 150mAh LiPo Battery
    • Experience Level:    Intermediate
    • Recommended Environment:    Indoor/Outdoor
    • Is Assembly Required:    No
    Needed to Complete:

    • Nothing! Everything you need to get in the air is included in the box.
    • Just charge your battery and you're ready to fly!
    SKU: EFLU6600
    €399.90
    €439.99

    LOW STOCK
  • Finwing 390 Pan + Tilt Module

     390* Versatile FPV Pan module + Tilt Module

    Includes: Pan Module + Pre-built Tilt Module, 1PCS Heavy Duty Titanize Metal Digital Servo, and 1PCS 17g servo

    •   Servo Pulse width range: 1000-2000
    •   Pan moving range: 3900-4000  (Full range)
    •   Tilt moving range: 600-900 (Full range)
    •   Control angle may be subject to your equipment wires. Please check carefully before flight to prevent binding.
    •   Compatible with Gopro2/Gopro3/Gopro water housing/ General FPV cameras

    Camera not included

    SKU: 390PANTILT
    €69.00

    LOW STOCK
  • Finwing FPV Air Titan airplane Kit

    Presenting the Air Titan from Finwing! These planes live up to their name, as they sport a wingspan that’s over 2.5 meters (99.2") and a massive amount of space inside for equipment and batteries. We ordered batteries specifically to go with this plane, and we’d recommend going with the 6s 10000mAh or 12400mAh batteries linked in the product listing along with a 15x8” APC prop. On our prototype model, it weighed over 12 lbs fully loaded and still was able to fly vertically with their power system. Yes…a 2.5M 12lb FPV plane that can fly vertical. It’s an amazing sight!

    This plane carries over the “gentle stall” characteristics of the Penguin, but super sized. No scary tip-stalls. Instead, it has super predictable flight characteristics. Tricycle landing gear with a steerable nose gear is included, along with a stable high wing design, plus a bottom camera port, and secondary top camera mounting area. Hand launch is possible, but you might need to work out a bit before you try it (see beginning of video!). Like the Penguin, this airframe was designed with FPV in mind, but would also serve as a great plane to fly at the field if you just want something you can strap a GoPro to, or maybe even 10 of them since it won’t mind the weight.

    Available and ready to ship now at eRCMARKET.COM the best place to get ALL your FPV and RC equipment!

    This is the kit version and doesn't include motor, esc, servos and other electronics.


    Specifications:

    •   Wingspan: 2520MM/ 99.2inch
    •   Kits Airplane weight:2.4kg(5.3IB) including all reinforcement parts
    •   Extra Payload:3.0kg-4.0kg (6.6IB-8.8IB)/ flight weight>6.0kg
    •   Customized Brushless Power system:
    •   Customized Motor for Airtitan:  M60K/ Power 1500W (not included)
    •   Testing static thrust: 5.5-6.0kg (6S, 15" Prop) (not included)
    •   Propeller recommend: 15*6 / 15*7 (not included)
    •   ESC: Advanced 80A OPTO (without Built-in BEC) (not included)
    •   External UBEC: 5V/6A,5.5V/6A or 6V/6A (Switchable) (not included)
    •   Material of fuselage and Wing: EPO​

    Does not include propeller. We recommend APC 15x7-8

    Recommended Servos:

    •   3PCS - 6kg Torque/CM  Metal gear servo (For Aileron and steerable landing gear)
    •   1PCS - 2.5kg Torque/CM Metal Gear Servo (Elevator)
    •   2PCS - 2.2kg Torque/CM Plastic Gear Servo (Rudder)
    Battery Recommendations:

      Recommend 5S-6S Lipo 10000mah  (7S or more cells lipo battery is not advised)

    Flight recommendations:

    • *Note : 5S with a 15*8 Prop is okay if your flight weight is less than 5.5kg. A 6S pack will however provide “better power"
    • Payload 3.0Kg equal to total flight weight approximately 5.5kg
    • Payload 4.0kg equal to total flight weight approximately 6.5kg
    • *Note: Flight weight of 5.5kg-6.0kg can meet most FPV requirements, and we recommend less than 6.0kg for most FPV pilots
    •  The heavier flight weight the better flying skills required.
    High Quality Reinforcement :

    •   Main-wing: built- in 4PCS alloy aluminum plus 2PCS carbon tube through the Main-wing
    •   Control surface of Aileron and Elevator: carbon tube reinforced, no need further DIY
    •   Horizontal stabilizer: 2PCS carbon tube reinforced
    •   Tail-boom :1 PCS Carbon Tube combined with thick Plywood reinforced
    •   Stainless steel servo horn and Aluminum clevis
    SKU: FAD1302KIT
    €249.00
    LOW STOCK
  • Finwing Penguin Wing Set

    Includes main wings with pre-installed reinforcement tubes and servo extensions and wood bases for servo arms. Also includes horizontal stabilizer with carbon fiber tube for reinforcing, plus vertical stabilizer.  Does not include servos or servo arms.

    SKU: UPP002
    €49.00

    LOW STOCK
  • Transparent Canopy PENGUIN

     Penguin V2 CANOPY

    This heavy duty transparency allows the user to install an HD camera outside the plane for best view.  With this transparency, it is possible to have a totally clear view off of the front of the plane with the HD camera mounted on top. 

    This also allows the user to use a GoPro Hero camera inside the waterproof case, while having a protected camera and transmitter inside the canopy.  Allows flying through clouds without getting cameras wet.

    Includes a mounting location on the top of the canopy for external mounting of HD cameras, and a platform oat the rear of the canopy for mounting the transmitter.  An opening is also available for those who want to mount their transmitter inside the canopy.

    This includes the canopy only, no foam cockpit.

    •   Model: UPP103
    SKU: UPP103
    €13.00

    OUT OF STOCK

    Notify me when in stock

  • Universeye FPV Penguin Advance ARF Airplane with electronics

    Universeye FPV Penguin Advance set with :  ESC60A,SBEC/ Motor M2815/ 4 servos.

    The first FPV specific airplane design with rolling takeoff capabilities, specially designed with canopy to accomodate camera, with pan/tilt device, and extra FPV equipment needed.

    • Large fuselage space for lots of equipment!
    • Transparent canopy design allowing you to protect your FPV camera from the weather while offering a crystal clear view.
    • FPV Camera on top,  and camera opening on the bottom of the fuselage (optional plastic dome available for bottom). Great for aerial photography, you can place a high definition camera on the bottom pointing down, or an HD camera can be mounted on the outside of the canopy for a clear view forward.
    • Front gear and tail gear design, runway take off and landing available.  Ground handling great with just rudder control.
    • Metal servo horns and strong hardware for strong and stable flight control
    • Large battery mounting area with hook and loop tape, plus side hook and loop mounts for easy equipment mounting.
    • Designed with great pre-made positions to place your GPS, video transmitter, radio transmitter
    • Rear mounted propeller is out of view and protected from those "rough" landings.

    Specifications:

    • Wingspan: 1720MM/67.7inch
    • Length: 1230MM/48.5inch
    • Wing Area: 36dm/3.9ft2 (Mainwing Area)
    • Motor: Brushless motor  D28mm, 1200-1300 KV- included
    • ESC:  50-60A
    • Servo: 3pcs 17g servo+ 1pcs 9g servo.
    • Battery: Li-Po 11.1V 3s 2400-5000mah ( Not included)
    • ARF Weight:  0.98kg/34.6oz. not including battery and your extra FPV devices
    • Static Thrust:  Motor 28 1.95Kg/69.0oz.
    • Max.flight weight more than 2.2kg/77.0oz
    • Payload:  600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight)
    • Material:  EPO Wing and fuselage/ Wooden rib reinforcement with aluminum alloy Pipe/Carbon Fiber pipe

    Shipping- Due the size of box we might limit the shipping option to certain destination, check your destination with us before ordering.

    SKU: FUP1205ADVARF
    €239.00

    LOW STOCK
  • Universeye FPV Penguin Kit

    Universeye FPV Penguin Kit, no servos, electronics/motorization

    The first FPV specific airplane design with rolling takeoff capabilities, specially designed with canopy to accommodate camera, with pan/tilt device, and extra FPV equipment needed.

    • Large fuselage space for lots of equipment!
    • Transparent canopy design allowing you to protect your FPV camera from the weather while offering a crystal clear view.
    • FPV Camera on top,  and camera opening on the bottom of the fuselage (optional plastic dome available for bottom). Great for aerial photography, you can place a high definition camera on the bottom pointing down, or an HD camera can be mounted on the outside of the canopy for a clear view forward.
    • Front gear and tail gear design, runway take off and landing available.  Ground handling great with just rudder control.
    • Metal servo horns and strong hardware for strong and stable flight control
    • Large battery mounting area with hook and loop tape, plus side hook and loop mounts for easy equipment mounting.
    • Designed with great pre-made positions to place your GPS, video transmitter, radio transmitter
    • Rear mounted propeller is out of view and protected from those "rough" landings.

    Specifications* need to complete.

    • Wingspan: 1720MM/67.7inch
    • Length: 1230MM/48.5inch
    • Wing Area: 36dm/3.9ft2 (Mainwing Area)
    • Motor: Brushless motor  D28mm, 1200-1300 KV
    • ESC:  50-60A
    • Servo: 3pcs 17g servo+ 1pcs 9g servo.
    • Battery: Li-Po 11.1V 3s 2400-5000mah
    • ARF Weight:  0.98kg/34.6oz. not including battery and your extra FPV devices
    • Static Thrust:  Motor 28 1.95Kg/69.0oz.
    • Max.flight weight more than 2.2kg/77.0oz
    • Payload:  600-1000G/21.5-35.5oz (Payload is the extra weight it can carry besides the standard ARF weight)
    • Material:  EPO Wing and fuselage/ Wooden rib reinforcement with aluminum alloy Pipe/Carbon Fiber pipe

    Shipping- Due the size of box we might limit the shipping option to certain destination, check your destination with us before ordering.

    SKU: FUP1202KIT
    €129.00

    LOW STOCK
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: