●Flybar Paddlex2 ●Size:60x36x5.5mm ●Weight:8.84g/pcs
5x8x2.5 Bearing (2pcs)
Revolectrix CellPro Power Lab 8X2 PL8 Duo, delivered with adaptors to JST/XH
Revolectrix continues the PowerLab tradition of excellence with the new Dual PowerLab 8x2. With completely independent dual channel operation, this monster boasts 1344W of output power per channel for a total of 2688W all told! This kind of power coupled with the extremely user-friendly and popular PowerLab interface, and features no one else in the industry can touch, like our PC compatible Charge Control Software (CCS) put this unit squarely at the top of the food chain and all for a price that might surprise you.
The Cellpro Dual PowerLab (DPL) 8x2 Battery Workstation directly supports all Cellpro Revolectrix battery packs using the default FMA wiring mode (interconnection requires purchase of the available basic Cellpro PowerLab adapter PN (CP8S-PA8S or CP8S-PA8S-US). FMA sells adapters separately to interface with various manufacturer's batteries, including the safe parallel adapters which can be daisy-chained to allow simultaneous, safe parallel charge of multiple packs or our MPA, which is likely the safest parallel board on the market.
For Battery types Lithium Polymer (1s to 8s balanced, 1s to 2s unbalanced), Lithium Ion (1s to 8s balanced, 1s to 2s unbalanced), Lithium Manganese (1s to 8s balanced, 1s to 2s unbalanced), A123 (LiFePO4) (1s to 8s balanced, 1s to 9s unbalanced), NiCd (1s to 21s), NiMH (1s to 21s), 6v, 12v, 24v Lead Acid batteries (Flooded, Gel, AGM, SLA)
Input Voltage Each channel may be operated on separate power supplies using 110V/15A isolated circuits for best results. Additionally both channels may be operated on one power supply provided packs on each channel are isolated.
Pack capacity 20 mAh to 360Ah
Input voltage 10-48VDC, reverse polarity protected
Input current 1A to 40A, software limited
Power conversion Synchronous DC/DC converter, supports multiple switcher frequencies of 31.25 kHz, 62.5 kHz, 125 kHz; user selectable by preset, 85% to 93% efficiency depending on output current
Output battery charge current Adjustable range 10mA to 40A, limited by 40A input current
Output battery discharge current Internal discharge 10mA to 10A, 95W max Regenerative discharge 10mA to 40A, 1344W max**
Continuous max output power 408W @ +12VDC input, 1344W @ +39.53VDC
Cell balancing Resolution 78uV (16 bit) for 1s-8s Li or A123 (LiFePO4) balanced charging
Voltage calibration Cell voltage measurements are factory calibrated to a standard traceable to NIST; calibration is to +/- 6 mV
Current calibration Charge current is factory calibrated on a 4A standard; calibration is to +/- 1mA
Selectable charge rates range 10mA to 40A per channel
Continuous maximum output power rating, 1344W @ +39.53VDC input voltage, 408W @ +12VDC input voltage
Using +40VDC to +48VDC input, 1344W output will deliver full current rating (40A) over the full range of output voltage up to 33.6V
Smart power management allows customer to select between programmable input power sources. Using the Charge Control Software (CCS), choose from several templates to get you in the ballpark, then fine tune the settings. Available settings include power supply input current limit, input low voltage limit, regenerative discharge rate and voltage limit. Dual PowerLab stores 1 set-up for Power Supply per channel and 1 set-up for Battery per channel and asks for verification one time on start-up
Dual PowerLab does not support charging through node wires only
Initiate charge, discharge, monitor, and multiple cycles at the DPL or via remote control from the CCS. Graph all major operations when using CCS. When using both channels, launch separate instances of the CCS within Windows.
Open Architecture presets allow for customization of any User Preset including show/hide presets on unit, preset name editing, up to 100 parameters control how presets are displayed and charging/discharge/cycling parameter associated with particular batteries and/or charging strategies. Unit includes 25 user preset banks pre-loaded for most major battery type/chemistries, plus 50 library presets.
0.1mohm voltage resolution allows accurate four point internal resistance measurement of each cell
Environmentally friendly, regenerative discharge capability of up to 1344W. Unlike traditional methods of discharge, which deplete the output battery's energy in the form of heat across a transistor, regenerative discharge takes most of that energy and puts it back into the input battery. In other words, when you discharge your LiPo for storage, you will be re-charging your Lead Acid input battery. The total amount of power that you can achieve is limited only by the amount of current that your input battery can accept, or 1344W, whichever is lower.
Dual PowerLab is also equipped with a traditional, 95W internal discharge capability which is non-regenerative
High speed, high quality 50mm cooling fan (one per channel)
Over-sized internal heat sink
Twin (per channel) 12AWG silicon input power cables with EC5 connectors