FIN MOUNT VERTICAL

FIN MOUNT VERTICAL
Robbe      



  Product rating
 
Review this product



SKU
S4638
Availability
LOW STOCK

Your price
7.00   


Quantity

Pricematch
Fin Mount Vertical
  • 700N DFC Engine Bearing Block Set

     Use for T-REX 700 Nitro DFC.

    Specifications:

    • Metal clutch bearing block(L) x 1
    • Metal clutch bearing block(R) x 1
    • Hex mounting bolt x 2(Φ5.5x60.9mm)
    • Scoket screw x 2(M3x8mm)
    • Socket button head collar screw x 4(M3x8mm)
    • Bearing 6800ZZ × 2(Φ10xΦ19x5mm)
    • Bearing 695ZZ C2 × 1(φ5xφ13x4mm)
    • M3 Nut × 2


    SKU: H7NB010XX
    €14.00
    OUT OF STOCK
  • APC Multicopter Prop set 15x8

     APC Prop set 15x8( Pusher and Tractor) , especially made for Multi-copter.
    Set including 1 Puller and 1 Pusher Prop, Shaft adapters INCLUDED

    PROPELLER specs.

    •   APC Electric propellers have been designed specifically for electric powered model airplanes.
    •   APC Computer optimized design gives these propellers a thinner profile and more "bite" with less weight compare to standard glow propellers.
    •   Lightweight molded nylon construction reduces rotating mass for less drag and more efficiency.
    SKU: APCMC15x8
    €10.00
    OUT OF STOCK
  • Blade Nano CP X Bind-N-Fly Electric Helicopter,BNF

    Flip, funnel or roll in any room of your house with the incredible Blade® Nano CP X. At just 29 grams (barely over an ounce), it's the lightest flybarless CP heli in its class. At the center of its amazing abilities is the proven AS3X® (Artificial Stabilization – 3-aXis) Flybarless System that gives the Nano CP X its perfect balance of agility and stability. It's unbelievably durable too, so you can fly aggressively without worrying about costly repairs.

    Key Features

    • AS3X® Flybarless System
    • Symmetrical 85mm main rotor blades
    • 2.1-gram linear long-throw cyclic servos
    • Carbon fiber main shaft
    • Sleek body with sharp Nano CP X graphics
    • Includes two E-flite® 1S 3.7V 150mAh 25C Li-Po batteries
    • Includes DC Li-Po charger with AA batteries
    • Includes two main blade:fast-flight blades and hi-performance blades

    Needed To Complete :Spektrum DX4e, DX5e, or any 6+ch DSM2® or DSMX® transmitter.

    Specs

    • Approximate Flight Time: 4-5 minutes
    • Battery:1S 3.7V 150mAh 25C LiPo (two included)
    • Completion Level: Bind-N-Fly
    • Experience Level: Advanced
    • Height: 3.11 in (79mm)
    • Is Assembly Required: No
    • Length: 7.75 in (197mm)
    • Main Blade Material: Plastic
    • Main Rotor Blade Length: 3.35 in (85mm)
    • Main Rotor Diameter: 7.75 in (197mm)
    • Number of Channels: 5 channels
    • Recommended Environment: Indoor/Outdoor
    • Rotor Type: Collective Pitch Single Rotor
    • Size/Scale: Ultra Micro
    • Swashplate Type: 140 CCPM
    • Tail Drive: Direct Drive
    • Tail Rotor Diameter: 1.57 in (40mm)
    • Type: Electric Collective Pitch Flybarless Helicopter
    • Weight: 1.05 oz (29 g)

    SKU: BLH3380
    €115.00
  • HVSK-40A Multicopter Brushless ESC 40A (OPTO)

    Avizar latest HVSK-40A High Voltage OPTO Brushless ESC, already programmed with Simon-K software.

    The Multicopter ESC is a special design for multi-copter aircraft,  excellent control over throttle linearity. Wide voltage range can be configured to be compatible with a variety of brushless motors available on the market.

    SimonK Firmware pre-loaded

    • Continuous current: 40A
    • Instant current(10S): 60A
    • BEC type: N/A
    • BEC output: OPTO
    • Battery cell: Li-io/ Li-poly 2-6S; NiMH NiCd 5-21
    • Weight :29g
    • Dimension L*W*H: 66*26*13mm
    • 3.5mm pre-soldered connectors for easy connections to Motors
    Features:

    1. High-power Mos, and a separate heat sink, extreme low output resistance of the PCB (printed circuit board), super current endurance.
    2. The power input uses extreme low output resistance greatly enhance the power stability, and has the protective effect on the battery.
    3. Safety electrical function: when the power is turned on, regardless of the throttle stick in any position does not start the motor immediately.
    4. Separate voltage regulator IC for microprocessor, providing good anti-jamming capability.
    5. Supported motor speed (Maximum): 210000 RPM (2 poles), 70000 RPM (6 poles), 35000 RPM (12 poles).
    6. Using a dedicated program tgy_debug, the master chip with high stability crystal oscillator, making the motor control more precise.
    SKU: HVSK40A
    €29.00
*
*
*
Type the characters you see in the picture:


*
There have been no reviews


Seen same product priced lower elsewhere? Fill the form below (see also Terms & Conditions)



Name: *
Email: *
Telephone:  
Competitors Link: *
Competitors Price: * (Tax inclusive)
Comments:  

Terms & Conditions:

 
    I have read and understood the Terms & Conditions
Code:  
Enter Code: *
   
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: