DJI Phantom 2 Quadcopter RTF, inc H3-2D Zenmuse Gimbal Combo

DJI Phantom 2 Quadcopter RTF, inc H3-2D Zenmuse Gimbal Combo
DJI Phantom 2 Quadcopter RTF, inc H3-2D Zenmuse Gimbal Combo DJI Phantom 2 Quadcopter RTF, inc H3-2D Zenmuse Gimbal Combo DJI Phantom 2 Quadcopter RTF, inc H3-2D Zenmuse Gimbal Combo DJI Phantom 2 Quadcopter RTF, inc H3-2D Zenmuse Gimbal Combo


  Product rating
Review this product


Your price

Product has been discontinued or replaced.


Phantom 2, with H3- 2D GIMBAL, 2 axis gimbal. Special price- Overstock- Destockage !!

Single units available for this special price !

The Dji Phantom 2 will fly for about 25 minutes. This Dji Phantom 2 is brand new and is the best solution for aerial flying, photography, and filming. The Dji Phantom 2 comes with one lipo battery, one Dji Phantom 2, wall charger, The Dji Phantom 2 extra spare props, and The Dji Phantom 2 remote controller

The Zenmuse H3-2D 2-axis gimbal is a motorized stabilizer for mounting a GoPro HERO3 or HERO3+ action camera. It helps isolate the camera from vibration incurred by the rotors to give you the smoothest possible aerial video. In addition, it allows the camera to tilt between -130 to +50° with a precision of ±0.08°. Tilting is controlled via an attachment that goes on the back of the transmitter.

Included with this "ready-to-fly" version of the Phantom 2 Quadcopter is a 6-channel, 2.4GHz transmitter (TX) that comes pre-bound with the aircraft. It features an operational range extending up to 3,280' line-of-sight, depending on conditions. The controls are configured in "Mode 2", which is the most popular mode among RC pilots .

Because of the complexity associated with multi-rotor aircraft, the Naza-M V2 flight control system in the Phantom 2 relies on a GPS-based navigation as well as gimbal, compass, and other data to maintain flight stability and provide other assisted-flying features. While fully manual operation is possible, and can be unlocked using the Naza Assistant Software, most users, especially videographers hoping to get the smoothest possible shoots, will opt for GPS or GPS Attitude flight mode. In GPS Mode the Naza system keeps the Quadcopter stable and right-side-up when moving, and holds it in a fixed horizontal and vertical position whenever you release the sticks.

  • Ball Link Set

     Ball Link Set (20pcs) for B450, B400

    SKU: BLH1637
  • 360 mm 3D CF blades

    High quaity blades, for Micro helicopters. The Extreme composite blades are considered by many Pro flyers as the best micro rotor blades money can buy. These ultra light blades are super smooth cutting through the air with great ease. The Extreme blades produce absolutely magnificent flying characteristics from superb stability to breath taking 3D performance

    SKU: RJXHA360
  • Align 850MX Brushless Motor (540KV)

    Align 850MX Dominator Brushless Motor (540KV)

    To meet the power and torque requirements of enthusiasts, the high output 850MX motor was born in Align’s R&D lab. With dramatic increase in torque and power output, capable of 5330 watts continuous power output and 110000 watts of burst power!
    Inherit from the previous 800MXs feature, high efficiency, superior power, excellent torque, low current draw and low temperature. It's capable of maintaining much more consistent torque and head speed through continuous 3D maneuvers, which is particularly special design for 3D flights.
    850MX motor incorporates radial fan in its end bell, creating powerful airflow to dissipate heat. Tweaks to motor design and reduction in weight not only contributes to dramatic power increase, the high efficiency cooling system enables cooler operating temperature during and after flights when compared to motor of previous generation.
    The 850MX motor armature are dynamically balanced to eliminate typical imbalance found in other outrunner motors.
    Maintenance free, high torque, high efficiency, stable, and low noise.
    High-speed ball bearings, powerful magnetic outrunner rotor.
    Suitable for T-REX 700E series helicopters and other 700 level models.


    • Input Voltage:12S
    • Max Continuous Current: 120A/250A(2sec)
    • Max Output Power:5330W/11000W(2sec)
    • KV Value: 540KV
    • Stator Arms: 12
    • Magnet Poles: 10
    • Dimension: Spindle 6x56.7x112.5mm
    • Weight: 570g


    • Socket screw(M4x10)X4
    • Washer(F4xF10x1)X4
    • 4mm gilt terminal x 3
    SKU: HML85M01T
  • DJI CAN-HUB (Z15, Wookong) DJI

    DJI CAN-HUB (Z15, Wookong) DJI

Type the characters you see in the picture:

There have been no reviews

To request a price match, you must Sign in

If you do not have an account, you can register by clicking here.

EUR (€)
  • Select language:
  • Select currency:
  • Select your country: