Charging Cords

Charging cords and cables for Chargers

  • Blade 130X -UMX battery connector

    Blade 130/ UMX battery connector, Make your own battery.

    supplied with silicone cable 10cm

    SKU: AV1323
    €3.00

    IN STOCK
  • Charge cable T12FG/FX-30

    Transmitter battery charge lead for T12FG and FX-30 transmitters (1.7 mm).

    SKU: Robbe8260
    €7.00

    LOW STOCK
  • Charge x6 Cable Blade 130X

    The parallel charge leads allow you to charge up to six battery packs simultaneously.
    Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to 6 of your 2S battery packs. Connect to your batteries with the connectors, as used in the Blade 130X, Beast UMX or Sbach 342 UMX. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    SKU: AV1322
    €8.50

    IN STOCK
  • Charger Adaptor Lead 11 IN 1

    The next generation of our 11 IN 1 Multi- Adapter, This adaptor is "All in one" features 4mm banana plugs that fit most chargers,
    And its nicely split into 11 different types of plugs on the other end.

    Includes the following connectors:

    • Deans Ultra
    • EC5
    • JST
    • Futaba/JR J
    • Deans
    • EC3
    • 4mm gold plug
    • Futaba Transmitter Charge
    • JR Transmitter Charge
    • 2x BARE leads- connect any of your..
    Take the mess out of your charging with this charger adaptor.
    SKU: KRB668
    €13.00

    IN STOCK
  • Charger Adaptor1S EFLIGHT

    1S High Current Ultra-Micro Battery Adapter Lead for Eflight lipo, such as MCPX, comes with bare wires 10cm, to be added to any multi or charging cable.

    SKU: PHP1S
    €1.50

    IN STOCK
  • Charging Cable BEC

    Made from High quality 2.5mm wire, Factory installed.

    Silver plated banana jacks, excellent item to upgrade your current charging cable.

    SKU: KRJ111J
    €7.00

    LOW STOCK
  • Charging Cable Futaba

    Charging cable with TX connector to fit Futaba radios
    Length 50cm. Provided Quality.
    This cable is produced and tested with most modern procedures. Cables are tested individually at 48v test, Conduction test, Polarity and shortcut test, stability of the contacts.
    Those cables provided with 3 years Guarantee.

    SKU: SKU11219
    €7.00

    IN STOCK
  • Charging Cable JR

    Made from High quality 2.5mm wire, Factory installed.

    Silver plated banana jacks, excellent item to upgrade your current charging cable.
    Avaliable for JR or Spektrum TX

    SKU: KRJ111
    €7.00

    IN STOCK

  • Micro Parallel Board - mCPX & nCPX

    Micro Parallel Charging Board - Unlimited Flight at Your Fingertips. Safe Parallel Charge Board for mCPX & Pico

    One of the best ways to extend your day of flying is multiple batteries, and with this Micro Parallel Charging Board, you can now charge up to (6) Ultra Micro Batteries, and (6) Nano CPX style batteries, allowing you to take flight times to new limits.

    Compatible with UMX style batteries found in aircraft like the Blade mSR, and NCPX batteries found in aircraft like the Blade nCPX, this parallel board can charge up to (12) batteries at once, allowing you to spend more time flying, and far less time waiting for your batteries to charge. Further, this micro parallel board is protected by self resettable fuses to prevent shorts when charging batteries in parallel.

    Specifications

    • Input Charge Connector: Male 4mm Banana Plug
    • Output Connector: 6x 1S Female JST-PH; 6x Female Pico
    • Wire Type: 18 AWG Silicone Charge Lead
    • Max Charge Rating: 1.5A per battery
    • Fuse Rating: 1.5A
    • Wire Length: 8"


    When charging in parallel, it is best to be sure that the batteries being charged are close in overall voltage. Charging multiple batteries that are far out of balance with each other can limit the batteries potential and shorten battery life.

    SKU: PH2-UMXNCP
    €7.00

    IN STOCK
  • Multi-Port Safe Parallel Adapter for EC5 XH/EH/HR

    Multi port parallel adapter 40A for EC5 with XH balance
    This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support different chargers  brands compatible with JST XH balance connectors and wiring.

    Version : EX5 XH/EH/HR, Cable and Balancer extension included.

    SKU: MPL-EC5
    €44.00

    IN STOCK
  • Multi-Port Safe Parallel Adapter for XH Compatible Battery Packs Deans

    MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.

    Unit includes: support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s); supports 40A max charge/discharge rate; every port reverse polarity fuse protection of main battery wires; every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators; supports non-balanced charge of up to two 1s LiPos used with "indoor models"; supports 1 RX and 1 TX NiCd/NiMH battery pack. Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring. Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.

    SKU: MPL-DEANS
    €56.00

    IN STOCK
  • Parallel (6X) Pico 1s charging cable

    The parallel charge leads allow you to charge up to six battery packs simultaneously.Charging Cable for 6pcs MCX,MSR,MSRX,NANO CPX 1s Lipo
    Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to 6 of your 1S battery packs. Connect to your batteries with the connectors, as used in the Nano CPX, MCX and other 1s lipos.. Connect to the charger's main output with 4mm banana plugs, and to the balance port with a standard 2S JST-XH balance connector. 10cm of top-quality silicone wire gives you the flexibility you need to easily get everything connected.

    SKU: AV1322NCPX
    €8.50

    IN STOCK
  • Parallel (6X) Walkera 1S charging extension

    The parallel charge leads allow you to extend charge up to six battery packs simultaneously. Charging extension Cable for 6pcs walkera, Hubsan 1s Lipo
    Constructed from the highest quality materials, they give you the best connection possible every time you charge your batteries.

    This unique design serves as both a charging and balancing cable for up to 6 of your 1S battery packs. Connect to your batteries with the connectors, as used in the walkera, Hubsan  1s lipos.. extension of 30cm, with Walkera Female 1s connector at the end.

    SKU: AV1322walkext
    €5.00

    IN STOCK
  • RX charge cable ALPEX

    RX charge cord - ALPEX

    SKU: SKU20948
    €4.00

    IN STOCK
  • Safe 40A Parallel Charge Board for 6 Packs 2-8S XT60 connector

    MPA is a Multi-Port Safe Parallel Module for safely interconnecting same-cell-count LiPo batteries in parallel; also supports RX/TX NiCds. This version supports LiPo batteries with JST XH compatible balance connectors and wiring. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, and other charger brands compatible with JST XH balance connectors and wiring.
     
    Spcifications:
    support for safe parallel charging of up to 6 same-cell-count packs at one time (2s-8s);
    supports 40A max charge/discharge rate;
    every port reverse polarity fuse protection of main battery wires;
    every cell/balance wire protected by self-resetting polyfuses with temperature warning indicators;
    supports non-balanced charge of up to two 1s LiPos used with "indoor models";
    supports 1 RX and 1 TX NiCd/NiMH battery pack
    Works with any Cellpro charger or battery workstation equipped with "XH MODE WIRING" option. Interconnect cables available separately to support Cellpro PowerLab 6/PowerLab 8, Cellpro 10XP, as well as other brand chargers which are compatible with XH balance plugs and wiring.
     
    Be sure to purchase the proper cable to plug the MPA into your Charger or Battery Workstation.

    SKU: MPL-XT60B
    €56.00

    IN STOCK
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: