Carbon Fibre Main Frame (1pc)

Carbon Fibre Main Frame (1pc)

  Product rating
Review this product


Your price



1 x carbon Fiber Main Frame (1pc)

  • 250DFC Linkage Rod Set

    The ball link are manufactured utilizing POM material, sleek surface, with superior anti-wear characteristic.
    Use for T-REX 250DFC(H25119).


    250DFC Linkage rod A × 4(M1.4x9mm)
    250DFC Ball link × 4
    SKU: H25124T
  • Carry Case Blade 350QX, Phantom ,Flamewheel

    Sturdy foam insert provides protection for everything you need to fly your 350 QX and more

    • Accommodates the 350 QX with long landing gear
    • Accommodates the GB200 gimbal
    • Holds up to 6 flight batteries
    • Holds various tools and accessories
    • Holds charging or camera equipment
    • Fits DX5e up to DX18
    • Locking design with keys
    • Brushed aluminum with bright graphics

    Will Also Fit The DJI Phantom, Phantom 2 & Phantom Vision With almost No Modifications Needed.
    Flamewheel 450 Will Fit With A Slight Trim Of The Foam.


    • Height:    11.5 in (292mm)
    • Length:    19.5 in (495mm)
    • Width:    20.5 in (521mm)
    SKU: BLH7849
  • Castle Field Link Programmer

    This is the Castle Creations "Air" Field Link Programmer. The AIR Field Link is compatible with nearly all Phoenix, Phoenix HV, ICE, ICE HV and Thunderbird controllers as well as CC BEC and CC BEC PRO BECs. Sometimes you need to make a change in the programming of a Castle controller and you just don't happen to have a laptop in your man purse. What to do? There's always the old stick programming method that we all love to hate. Yes it works, but...there has to be a better way. Now there is Field Link! Field Link allows you to modify the most commonly used settings in your Castle controller all at the touch of a single button. No computer needed (mostly). Simply connect the Field Link to the throttle lead of the controller and power the pair as described below. Click the button to scroll through and change the indicated settings. It doesnt get any easier! This card is also a Castle Link that allows access to the entire world of Castle tuning functionality.

    Does it work without a computer or not?
    Yes, mostly. The card is programmed to work with the latest controllers and software when it leaves the Castle workshop. It will work with all Castle Link compatible controllers running software released since 2007. Go to for more details. There is always a chance that Castle will upgrade the controller firmware down the road and that upgrade may require that the Field Link be upgraded too. That is easily accomplished, but it will require a computer running the latest version of Castle Link that is always available for free on the Castle website. Castle will also be happy to upgrade it for you if you send it to them in the mail.

    Specific Usage Notes:

    • Thunderbird Controllers: Thunderbird controllers have fewer settings than may be represented on the Field Link. The Field Link will simply skip over these unsupported option rows.
    • CC BEC and CC BEC Pro: CC BEC and CC BEC Pro have adjustable output voltages only. Use the BEC VOLTAGE row on the Field Link to change their output value.
    • CC BEC: CC BEC does not supply output power when connected to the Castle Link or Field Link. It must therefore be powered with a Y harness for field use. The motor pack is not required for this specific setup.
    • CC BEC Pro: To use the Field Link you must use the adapter cable provided with your CC BEC Pro. Connect one side to the Field Link and the other side to the “Link Port” on your CC BEC Pro.

    Note: Field Link Card is capable of changing the following settings, however, the card cannot change settings on controller series that do not have these settings.

    • Cutoff voltage
    • Auto LiPo volts per cell (3.0, 3.1, 3.2, 3.3, 3.4, 3.5)
    • Low voltage cutoff type
    • BEC voltage setting
    • Motor timing
    • Motor direction
    • Throttle type
    • Brake
    • Governor gain
  • Ceramic Ball Bearing Set for OS40-55, TT40-56,YS50-56

    This set is to be used on Helicopter engines : OS 40/46/50/55- Thunder Tiger 40/46/53 Redline & Pro - Enya 40 - Magnum 40/46,ys 50-56

    also check your motor specifications, the bearings might fit other engines as well

    Ceramic is the new Holy Grail! Its lighter, smoother, stiffer, harder, corrosion resistant, and electrically resistant. These fundamental characteristics allow for a wide range of performance enhancements in bearings. Ceramic bearings dissipate heat quickly, reducing friction and wear while maintaining a precision smooth surface. Today's leading edge ceramics are made with Silicon Nitride (Si3N4) and have characteristics similar to the heat absorbing, highly resilient tiles on the Space Shuttle as they protect it from the 2500 plus degrees F. extremes of re-entry into the earth's atmosphere. The use of Ceramics for bearing components results in a far superior product over traditional all steel ball bearings.

    Set include 2 ceramic bearings, Front and Rear

    The ceramic ball on the right is not only much lighter and impervious to corrosion, but also much more resistant to impact. Ceramic bearings earn their reduced friction due to much tighter roundness tolerances as compared to even the best steel bearings.

    SKU: R6Z-6902
Type the characters you see in the picture:

There have been no reviews

Seen same product priced lower elsewhere? Fill the form below (see also Terms & Conditions)

Name: *
Email: *
Competitors Link: *
Competitors Price: * (Tax inclusive)

Terms & Conditions:

    I have read and understood the Terms & Conditions
Enter Code: *
EUR (€)
  • Select language:
  • Select currency:
  • Select your country: