Compass Warp 360 Kit inc Motor & Blades Red/White Canopy WARP360WR
The Compass Warp 360 is the newest helicopter to the Compass Model product line. The Warp 360 is a low-maintenance, aggressive, powerful and quiet 450 size electric helicopter!
The Compass Warp 360 utilizes a single-stage direct belt drive which allows for an extremely quiet and efficient drive-train. The rotor head is comprised of a nearly rigid design by Compass Model. This head design provides a level of precision and aggressive response more commonly associated with the larger 90 size electrics, to the 450 size market.
The Warp 360 will fly on batteries ranging from 3s to 6s LiPo. The recommended power setup is a 6s LiPo in the 1000-1300MAh range. The kit with a motor and blades will come with a 6s motor from Compass Model along with 350mm carbon fiber rotor blades. The belt has been designed for a maintenance free and extremely efficient setup. Belt hop or skipping has been eliminated with the large guide pulleys and reenforced belt design.
Compass Model did not stop in its pursuit of developing world class r/c model helicopters on its newest model. Compass knew it had to provide its customers the most powerful and precise 450 size helicopter ever developed. To aid in this challenge they turned to a high voltage power plant. The 6s high-voltage LiPo reduces the current load on the electronics. As the voltage is doubled to a 6s LiPo, the current drops as well as wasted energy, in the form of heat. The energy saved due to the lower heat output allows for the longer flight times compared to a 450s standard 3-cell LiPo system. The Warp 360 is proving to be the best 450 size electric helicopter ever developed.
Gens Ace Lipo 4000 mAh 4S 14,8V 25C
The Jeti Duplex MUI 75 is a voltage and current telemetry sensor, compatible with all Jeti Duplex receivers and expanders, suitable for measuring currents up to 75A and voltages up to 60V.
Using this sensor it is possible to view on your Jeti Box, the overall pack voltage, the motor run time and the capacity drawn from your flight battery as well as the present amp draw of your power system! You can also set alarms for:
This sensor should be connected between the power systems battery pack and the speed controller, in order to provide a pass-through to measure the current drain of your power set.
Two additional wires are used to measure battery pack voltage.
An audible alarm can be configured via the Jeti Box to provide an alert when the flight battery voltage drops below a configurable minimum or when the current draw exceeds a configurable maximum. An alarm can also be configured for the battery capacity. The alarm sound is emitted from the duplex transmitter module.
Please note, the maximum current capability of this sensor is 75 amps. This sensor is not required to view the voltage and other metrics associated with the receiver system, which is provided by all Duplex receivers, without the need for an additional sensor.
The MUI 75 sensor weighs approximately 21 grams (0.74 ounces)