Accessories

Here you can find all necessary Accessories for your Helicopter, Airplane and more
Accessories

Accessories

Glue

Glue

Storage

Storage


  • C-GO1 HD Camera by BLADE

    Key Features

    •   5.8GHz downlink to support mobile devices with included antenna
    •   1080p/30 recording or 720p/30 when streaming
    •   Lightweight and small form factor
    •   Low latency and long range Wi-Fi

    Overview

    Introducing the perfect action camera for your RC needs! Whether you are looking for a lightweight FPV camera with streaming capabilities that won’t interfere with your 2.4GHz radio or just looking for a high quality action camera, the E-Flite® C-GO1 is destined to be the #1 choice of modelers everywhere.

    Not to mention, it’s the camera included with the Blade® 350 QX2 AP Combo!

    Specifications:Operating Environment Temperature 14° F - 122° F (-10° C 50° C)
    Working Time 60 - 90 Minutes (depending on Wi-Fi usage)
    Optical Zoom Fixed Focus
    Aperture F2.8/F3.0
    Field of View (FOV) 120°
    Sensor Size CMOS 1/2.7"
    HD Recording 1080P 30FPS
    Video Format AVI (H.264)
    Photo Format JPEG
    Audio Format AAC
    PIC Resolution 1920x1080
    Downlink Resolution D1 720X480/30p
    Storage Port Micro SD (up to 16GB supported)
    2 Megapixel
    SKU: EFLA900I
    €189.90

    IN STOCK 48H
  • Carbon Tail Boom Brace 430mm

     Carbon Tail Boom Brace 430mm

    SKU: MIK-722
    €17.90

    LOW STOCK
  • DJI Phantom 2, FC40, Vision Propeller Pair Self Tightening

    DJI Phantom 2 Vision Propeller Pair Self Tightening 9"

    Contents :
    1 x DJI Phantom Vision 2 CW Self Tightening Propeller 9"
    1 x DJI Phantom Vision 2 CCW Self Tightening Propeller 9"

    SKU: DJIPROPV2
    €13.00

    LOW STOCK
  • Logo 700 Quick Release Canopy Mounts

    RCBooya Mikado Logo 700 XXtreme Quick Release Release Canopy mount features a
    custom locking push/pull pin design made to fit the Logo 700
    Helicopter.

    -Quick Release pin is made from all stainless steel components
    -Standoff is made from 6061-T6 aluminum
    -Hardcoat Surface Treatment
     -Dyed  Black
     -Standoff
    -Length 1.270in/ 32.26mm w/M3  mounting thread


    Kit is
    designed for use with the stock Logo canopy.
    Use of any other canopy may affect the intended performance of this kit
     
    Kit includes:
    2-Quick Release Pins
    2-Quick Release Standoffs
    4-Grommets

    *NOTE: Use of this kit requires you to  increase the canopy mounting holes on your canopy  to 11/32 diameter
      to install the supplied canopy grommets.

    SKU: L7QRCM
    €22.99

    IN STOCK
  • Neck Strap for DS-16

    Neck Strap for DS-16

    SKU: JMS-DS-NS
    €27.50

    IN STOCK 48H
  • Pixhawk External LED and USB Module

    The module build in LED and USB on one board. You can use it to connect to Pixhawk. Use the provided four-position DF13 cables and connect to the I2C splitter module to set up a bright, multicolor LED and convenient USB port for your vehicle.

    Included in the set:

    • External USB module
    • External LED module
    • Two four-position DF13 cables (20 cm)
    SKU: PIXHLEDUSB
    €13.00

    IN STOCK
  • Raptor E700 Quick Release Canopy Mount

    RC Booya Raptor E700 Quick Release Canopy Mount RE74QRCM

    Quick Release Canopy mount features a custom locking push/pull pin design

    made to fit your Raptor E700 helicopter.

    -Quick Release pin is made from all stainless steel components -Standoff is made from 6061-T6 aluminum
    -Hardcoat Surface Treatment
    -Dyed Black
    -Standoff Length 22.6mm/.89 in w/M3 thread

    Kit is designed for use with the stock Raptor E 700 Canopy

    Use of any other canopy may affect the intended performance of this kit

    SKU: RE74QRCM
    €39.99

    IN STOCK
  • Servo mounting set JR/Futaba HV, LOGO XXtreme

    Servo mounting set JR/Futaba HV, LOGO XXtreme

    SKU: MIK-4588
    €19.50

    IN STOCK 48H
  • TREX 450 PRO Quick Release Canopy Mount

    RC Booya Align 450 PRO Quick Release Canopy Mount 45PQRCM

    Quick Release Canopy mount features a custom locking push/pull pin design made to fit the

    Align 450 Pro Helicopters Only

    Quick Release pin is made from carbon steel, bright zinc plated with stainless steel from carbon steel, bright zinc plated with stainless steel components and is designed to stay connected to the canopy.

    -Standoff is made from
    -6061-T6 aluminum
    -Hardcoat surface treatment
    -Dyed Black

    SKU: 45PQRCM
    €22.99

    LOW STOCK
  • TREX 450L Dominator Quick Release Canopy Mount

    RC Booya Align 450L Dominator Quick Release Canopy Mount 45DQRCM

    Quick Release Canopy mount features a custom locking push/pull pin design made to fit the

    Align 450L Dominatior Helicopters Only

    Quick Release pin is made from carbon steel, bright zinc plated with stainless steel from carbon steel, bright zinc plated with stainless steel components and is designed to stay connected to the canopy.

    -Standoff is made from
    -6061-T6 aluminum
    -Hardcoat surface treatment
    -Dyed Black

    Kit is designed for use with the stock Align canopy. Use of any other type of canopy may effect the performance of the kit.

    Kit includes:
    2-Quick Release Pins
    2-Quick Release Standoffs
    4-Grommets

    *NOTE: Use of this kit requires you to increase the canopy mounting holes to 11/32 diameter to install the grommets.

    SKU: 45DQRCM
    €22.99

    IN STOCK
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: