T-REX 600 Nitro 3G
Specification (T-REX 600N)
- Length: 1160mm
- Height: 410mm
- Main blade length: 600mm
- Main rotor diameter: 1350mm
- Tail rotor diameter: 240mm
- Engine pinion gear: 20T
- Autorotation tail drive gear: 180T
- Drive gear ratio: 8.5:1:4.5 (E:M:T)
- Flying weight:Approx.: 3100g
- Instruction (T-REX 600N)
1. Bump resistance fiberglass painted canopy. Canopy also features a rigid easy clip on/off design for fast installation and removal.
2. Simple and light weight design provides awesome flight performance nearly equal to larger helicopters while still maintaining very stable hovering and flight.
3. +-15° collective pitch is possible for extreme 3D performance.
4. Clutch, Fan and Bell assembly provide a very smooth operation even at high RPM.
5. Forward mounted tail servo helps to keep exhaust oil from entering servo also improves the CG.
6. Pitch and All servos moved forward for CG.
7. Battery tray designed for easy and clean radio gear installation.
8. Fuel Tank Capacity 440cc for about 10 minutes 3D flying.
9. Main Gear Radio 8.5:1, 1500-2200 Rotor RPM.
10. Heavy duty tail with thrust bearings.
11. 95mm Tail Blades.
12. Highly efficient shaft driven tail design.
13. Rigid frame design that can also handle hard crashes without damage.
14. Carbon Fiber frames, fins and boom supports.
15. Super engine cooling system features large diameter fan and very efficient airflow to provide unequaled cooling and horsepower.
16. Clutch/Start shaft feature a 10mm ID one way bearing to eliminate any bearing problems during starting and flight.
17. Ready to fly weight (no fuel) is an incredible 3.10Kg.
18. Fuel Tank designed so that no additional header tank is required.
19. New main gear with one-way bearing design for high torque.
20. New tail boom supports.
- T-REX 600 NFL Kit x1
- 3G Programmable Flybarless System x1
- 600D Carbon fiber blade x1
- DS610 Digital servo x3
- DS620 Digital servo x1
- 2 In 1 voltage regulator combo x1
- RCE-G600 Governor x1
IN STOCK 48H
Equipped with DFC flybarless head assembly, with extremely low CG design to minimize wind resistance, providing more direct and precise flight control response and higher top speed.
Dual 3K carbon plate side frame design for ease of maintenance and resistance to torque induced flex.
Additional radial bearing is added to the top of the main gear hub to ensure stable rotation, and eliminate jamming of one way bearing.
Newly designed unibody stainless steel tail drive gear center mount, for more precise tail drive gear and higher tolerance.
New high quality carbon rudder control rod assembly using 5mm carbon rod and metal connectors, resulting in improved rudder control precision.
Brand new torque tube front and rear drive gear set, use utilizes newly developed, highest spec and superior anti-wear material to increase the overall strength and durability. Effectively minimize gear striping and crash damage.
High quality new tail gearbox design, combined with new dual point mounted tail pitch control assembly to minimize slops and increase rudder control precision.
Utilizes high efficient tail drive system.
High speed rated thrust bearing in tail blade grips.
High efficiency tail shaft drive design.
Highly efficient lightened engine cooling fan, reducing engine load and improving cooling efficiency.
Large diameter clutch system with unique installation method for good balance, minimal vibration, and effective power transfer.
Forward mounted rudder servo to protect it from exhaust contamination.
95mm tail blades for sharp rudder response and excellent tail locking ability.
Unique H cross section shaped electronic mounting platform for easy electronic mounting and protection.
Large capacity 440CC fuel tank for up to 10 minutes of extreme 3D flights.
Starting and clutch supporting point utilizes 10mm one way bearing.
All up ready to fly dry weight is only 3200g (7lbs).
Main fuel tank designed with fuel supply stabilization effect.
Impact resistant fiberglass canopy with 3 point hook mounting system for ease of install/removal.
Designed with concepts from large helicopter competitions, for the best static and dynamic flight performance.
Specification(T-REX 600N DFC)
- Length: 1160mm
- Height: 357mm
- Main Blade Length: 600mm
- Main Rotor Diameter: 1350mm
- Tail Rotor Diameter: 240mm
- Engine Pinion Gear: 20T
- Main Drive Gear:170T
- Autorotation Tail Drive Gear: 180T
- Drive Gear Ratio: 8.5:1:4.5(E:M:T)
- Fuel Tank Capacity:440cc
- Flying Weight Approx: 3200g
- T-REX 600N DFC Kits Set x 1
- 600 3G Carbon Fiber Blades x 1set
- 3GX Flybarless system x 1
- Ds615 Standard servo x 3
- Ds655 Specialized servo x 1
- Governor Sensor x 1
- B6T 2 In 1 Voltage Regulator x 1
IN STOCK 48H