Receivers

 Receivers for Radios , Spektrum, Futaba, Hitec, Webra

  • 4-Channel DSMX Aircraft Receiver

    • Full-range DSMX receiver
    • Antenna is amplified for greater signal clarity
    • Small, remote receiver attached to antenna provides signal path diversity
    • 4-Channel – throttle, elevator, aileron and rudder channels for park flyers, trainers and most sport planes
    • Flight log and telemetry compatible
    • 2048 resolution

    Specification:

    Type: Full Range DSMX Aircraft Receiver
    # of Channels: 4
    Modulation: DSM2/DSMX
    Band: 2.4GHz
    Length: 1.2 in (31mm)
    Width: 0.7 in (17mm)
    Height: 0.4 in (11mm)
    Weight: 0.2 oz (5.6 g)
    Voltage Range: 3.5 - 9.6V
    Antenna Length: 190mm
    SKU: SPMAR400
    €29.00

    IN STOCK 48H
  • AR600 6-CH DSMX

    The AR600 is the affordable way to equip your sport plane or trainer with the speed, and reliability of DSMX control. And finding room to mount it is easy. Its lightweight, compact case design easily fits into any fuselage, including those of most park flyers.

    Product Specifications

    Type: DSMX Full Range Receiver
    # of Channels: 6
    Modulation: DSM2/DSMX
    Band: 2.4GHz
    Length: 1.18 in (30mm)
    Width: 0.85 in (21.5mm)
    Height: 0.49 in (12.5mm)
    Weight: 0.27 oz (7.9g)
    Voltage Range: 3.5-9.6V
    SKU: SPMAR600
    €45.00

    IN STOCK 48H
  • AR7010 DSMX 7Ch

    AR 7010 WITH SATTELITE

    The AR7010 combines an internal and remote receiver, offering superior path diversity. The radio system simultaneously transmits on two frequencies, creating dual RF paths. This dual path redundancy, plus the fact each of the two receivers is located in a slightly different location, exposes each to a different RF environment and creates a bulletproof RF link in all conditions. The AR7010 is Flight Log compatible (SPM9540 sold separately).

    Specs:
    Type: AR7010 7-Channel DSMX Full Range Receiver
    # of Channels: 7
    Modulation: DSM2/DSMX
    Band: 2.4GHz
    Length: 1.85 in (47mm)
    Width: 1.00 in (25.3mm)
    Height: 0.62 in (15.8mm)
    Weight: 0.49 oz (14g)
    Voltage Range: 3.5-9.6V
    Antenna Length: Main Rx: 30mm (2); Remote Rx: 30mm (2)
    SKU: SPMAR7010
    €69.90

    OUT OF STOCK

    Notify me when in stock

  • AR7200BX 7CH DSMX Flybarless Control System w/BeastX

    This is the Spektrum AR7200BX 7CH DSMX Flybarless Control System. BeastX flybarless technology is the most powerful, easiest-to-use flybarless technology flying today. Now with the amazing AR7200BX, you can add it to your 250- to .90-size helicopter while saving space and reducing flying weight at the same time. The groundbreaking Spektrum innovation combines a 7-channel DSMX receiver with a BeastX, 3-axis MEMS stabilization system into a single, compact unit! Besides eliminating the mechanical complexity of a flybar, the BeastX technology built into the AR7200BX lets you quickly fine-tune stability, cyclic response and tail response without touching the linkage or requiring special software. All you need is your DSM2/DSMX transmitter and this two-in-one unit!

    Features:
    • Integrated BeastX 3-axis MEMS gyro
    • 250 to 800 sized helicopters
    • Designed for easy access for field adjustments
    • DSMX safety and control
    • Flight log telemetry compatible
    • 11ms frame rate
    • 2048 resolution
    Specifications:
    • Type: Flybarless Control System Receiver
    • # of Channels: 7
    • Modulation: DSM2/DSMX
    • Band: 2.4GHz
    • Length: 1.42 in (36mm)
    • Width: 1.1 in (28mm)
    • Height: 0.5 in (13mm)
    • Weight: 0.66 oz (18.6 g)
    • Voltage Range: 3.5V-8.5V
    • Antenna Length: 110mm, 40mm
    SKU: SPMAR7200BX
    €185.00
    €199.00

    IN STOCK 48H
  • AR8000 8-Channel DSMX

    Spektrum is committed to offering receivers to modelers in all categories within the hobby, and the AR8000 is no exception to that commitment. The AR8000 is packed with industry-leading features including an incredibly fast input-to-output response with an 11-millisecond frame rate when used with capable transmitters, 2048 resolution for ultra-smooth servo travel, and a compact footprint making it ideal for any application from extreme 3D to competition helicopter performance. Always purchase products from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM2, DSMX or Spektrum. Attention: Horizon Hobby has confirmed that all Spektrum Products being sold by KoKo Technology are counterfeit. We consider it a danger to use these products, waive all liability and will not support any warranty or service in regards to them. This product is not intended for use by children under 14 years of age without direct adult supervision. Type: AR8000 DSMX High-Speed 8-Channel Receiver# of Channels:8 Modulation:DSM2/DSMX Band:2.4GHz Length:1.35 in (34.3mm) Width:1.27 in (32.3mm) Height:0.45 in (11.4mm) Weight:0.33 oz (9.4g) Voltage Range:3.5V-9.6V

    SKU: SPMAR8000
    €95.00

    IN STOCK 48H
  • AR9000 DSM2 9-Channel Rx

    9 Channels

    • External and Internal Receiver
    • DuaLink
    • ModelMatch prevents flying a model using the wrong model memory (feature does not work with module systems)
    • ServoSync (feature does not work with module systems)
    • SmartSafe fail-safe system

    The AR9000 combines an internal and remote receiver, offering superior path diversity. The radio system simultaneously transmits on two frequencies, creating dual RF paths. This dual path redundancy, plus the fact that each of the two receivers is located in a slightly different location exposes each to a different RF environment and creates a superior path diversity RF link in all conditions.

    Spektrum’s Flight Log is compatible with Spektrum AR9000 receivers. The Flight Log displays overall RF link performance as well as the individual internal and external receivers link data. Additionally it displays receiver voltage.

    Spektrum’s remote receiver is compatible with all Spektrum aircraft receivers that utilize remote antennas.

    SKU: SPMAR9000
    €119.00

    IN STOCK 48H

  • AR9020 9-Channel DSMX/XPlus Receiver

    Overview

    The Spektrum™ AR9020 is a 9-channel DSMX® receiver that gives you the option of adding extra channels simply by plugging a Spektrum X-Plus4 or X-Plus8 channel expander into its SRXL port. This makes it ideal for scale modelers who like to push realism to the extreme with working accessories and lights, in addition to regular control functions. The AR9020 also includes two small, remote receivers that let you take advantage of patented Spektrum MultiLink™ technology. The remote receivers allow the AR9020 to “see around” conductive materials in the model and maintain a solid signal in any attitude.

    The AR9020 full range 9-channel, X-Plus™ compatible receiver features DSM2™ and DSMX technology and is compatible with all Spektrum™ and JR® aircraft radios that support DSM2 and DSMX technology, including: JR12X, 11X, X9503, X9303, Spektrum DX10t, DX8, DX7s, DX7se, DX6i, DX5e and Module Systems.

    Applications
    For use in up to 9-channel aircraft, including:
    • All types and sizes of glow, gas and electric powered airplanes
    • All types and sizes of no-powered gliders
    • All types and sizes of glow, gas and electric powered helicopters

    IMPORTANT: Not for use in airplanes that have full carbon fuselages OR that have significant carbon or conductive structures. We recommend using either the AR6255 or AR9300/AR9310 receivers for carbon fuselage applications.

    NOTICE: The AR9020 receiver is not compatible with the Spektrum DX6 park flyer transmitter.


    Key Features

    • 9-channel full range receiver
    • Includes one internal and two remote receivers
    • SmartSafe™ failsafe system
    • Flight Log and Telemetry compatible (optional)
    • Patented MultiLink™ receiver technology
    • X-Plus compatible
    • QuickConnect™
    • 2048 Resolution
    • High-speed 11ms operation when used with capable transmitters

    Product Specifications

    • # of Channels:9
    • Modulation:DSM2/DSMx
    • Band:2.4GHz
    • Length:1.61 in (41mm)
    • Width:0.91 in (23mm)
    • Height:0.79 in (20mm)
    • Weight:0.42 in (11.9g)
    • Voltage Range:3.5-9.6V
    • Antenna Length:31mm
    SKU: SPMAR9020
    €139.00

    IN STOCK 48H
  • DSMX Remote Receiver (satellite)

    The remote receiver can be used as a replacement for any DSMX receiver that utilizes a remote receiver. It can also be used as an optional second remote receiver for the AR9010 or fourth remote receiver for the AR9110. The remote receiver includes one 24-inch extension; however, various lengths of receiver extensions can be purchased allowing various placement options for mounting purposes.

    Additional remote receiver extensions are available in 6", 9", 12", 24" and 36" lengths. Always purchase products from a Horizon Hobby, Inc. authorized dealer to ensure authentic high-quality Spektrum product. Horizon Hobby, Inc. disclaims all support and warranty with regards, but not limited to, compatibility and performance of counterfeit products or products claiming compatibility with DSM2, DSMX or Spektrum.

    Attention: Horizon Hobby has confirmed that all Spektrum Products being sold by KoKo Technology are counterfeit. We consider it a danger to use these products, waive all liability and will not support any warranty or service in regards to them.

    Specification:

    • Type: DSMX Remote Receiver
    • Modulation:DSMX Band: 2.400-2.4835GHz
    • Length:0.98 in (25mm)
    • Width:0.89 in (23mm)
    • Height:0.27 in (9mm)
    SKU: SPM9645
    €39.00

    IN STOCK
  • Futaba R3008SB 2.4GHz FHSS Telemetry Receiver 10J

    Futaba R3008SB 2.4GHz FHSS Telemetry Receiver 10J

    The R3008SB is a T-FHSS telemetry-capable receiver that features S.Bus and S.Bus2 compatibility and 8 conventional ports. The receiver also features an external battery voltage connector.

    Size: 24.9 x 47.3 x 14.3mm
    Weight: 10.1g
    Power Requirement: 4.8-7.4V
    Battery F/S Voltage: Sets up with a transmitter
    Extra Voltage Port: 0 ~ 70V DC

    Not compatible with S-FHSS/FHSS/FASST/FASSTest systems.

    SKU: F1027
    €64.00

    LOW STOCK
  • Futaba R6008SP 2.4 GHz RASST receiver

    Compact, lightweight eight-channel 2.4 GHz RASST receiver with end-mounted servo sockets. With serial output, therefore ideal for controlling helicopters, quadrocopters and other models.
    With two aerials and diversity system. With extended range of more than 3000 m, making it sutable for large-scale flying machines. Where necessary, the 13 cm long aerials can be deployed outside the model if the fuselage or chassis is made of carbon fibre or metal.

    A serial output at the receiver requires special modules in the model which are capable of reading out the signal chain and processing it appropriately, e.g. the HC 3-Xtreme or Mini-V-Stabi, Mikrokopter, etc.  Conventional servos cannot be connected directly.

    No crystals, no spot frequency selection and maximum security from same-channel interference thanks to 2.4 GHz RASST technology. High-speed Frequency Hopping for effective suppression of interference signals. High Intermediate Frequency of 800 MHz for immunity to general background interference. Integrated EASY-Link button for simple binding.

    Can be used with all FASST transmitters with 8 channels or more when set to multi-channel mode.

    Specification

    • Channel spacing: 8.00
    • Weight: 13 g
    • Channel spacing: 2048 kHz
    • Dimensions: 47 x 25 x14.3 mm mm
    • Voltage: 3.3-8.5

    SKU: F0993
    €132.50

    IN STOCK 48H
  • Futaba R6014 HS FASST receiver

    The R 6014HS receiver has a switch to select between Digital and Analogue servos. The signal pulse for digital servos on servo outputs 1-6 is even faster, which can give an even shorter latency time.
    Fitted with Dual Antenna Diversity System

    • Channel spacing: 14.00   
    • Weight: 21 g
    • Channel spacing: 2048 kHz   
    • Dimensions: 52,5 x 37,5 x 16 mm
    • Current: 50 mA

    SKU: RobbeF1059
    €179.00

    IN STOCK 48H
  • Futaba R6303SB FASST S.Bus receiver

    This is the Futaba R6203SB 3-Channel 2.4Ghz FASST Micro S.Bus Receiver. Stop cable clutter with the innovative S.Bus system. It uses digital serial data communication technology to transmit control signals between your receiver and servos. A single S.Bus cable can carry signals to as many channels as your transmitter can handle. You no longer have to worry about plugging in the wrong servo to the wrong channel, because each servo knows what channel it is dedicated to in advance.

    S.Bus receivers are limited only by the number of channels your transmitter will handle. Don’t have S.Bus servos? No problem. SBD-1 S.Bus Decoder Cables let you use existing analog and digital servos, too. The Futaba S.Bus system is nothing short of revolutionary – and the revolution’s just beginning.

    Features:

    •   S.Bus system output and three conventional system channel outputs allows usage with conventional servos as well as S.Bus system compatible servos.
    •   When linking procedure is performed, receiver recognizes the signal mode (FASST 2.4GHz 7ch mode or 8ch/10ch/Multi Channel Mode) automatically
    •   High-speed or normal operating mode
    •   PWM 3CH (CH 1,2,3)
    •   S.BUS 16+2CH
    •   Small and light
    •   Dual antenna diversity (coaxial antenna)
    •   Full range
    •   Operating Voltage 3.5 – 8.4V’s

    Specifications:

    • Power Requirement: 3.7 – 7.4V
    • Power Voltage: 3.5 – 8.4V
    • Dimensions: 0.89 x 1.47 x 0.37" (22.5 x 37.4 x 9.3mm)
    • Weight: 0.25oz (7.2g)

    SKU: F1014
    €73.00

    LOW STOCK
  • Futaba R6308SBT FASST Telemetry receiver

    Compact, lightweight R6308SBT 2.4 GHz FASST receiver with integral FASSTest® telemetry transmitter, for "transmitting model data back to the ground".

    In spite of its small size, the R6308SBT receiver features an integral FASSTest® telemetry transmitter, and can transmit a maximum of 32 telemetry data sets to the ground over a range of > 1000 m .
    Any existing FASST system can be converted to telemetry operation at any time by using an R6308SBT 2.4 GHz FASST telemetry receiver.
    Naturally the receiver is fitted with eight PWM outputs for normal servos. The PWM outputs are switchable, i.e. you can make use of either PWM channels 1...8 or 9...16. Two receivers can be operated in parallel to provide sixteen PWM channels.

    Channel 8 can be switched to S.BUS mode, in which case up to eighteen S-BUS servos or other devices can be connected to this output.
    Devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted. If two receivers are employed, the number of telemetry channels rises to 64.
    The receiver's integral transmitter sends telemetry data present at the S.BUS2 socket to the Telemetry-Box by radio; the data are then displayed on the screen, or generated in the form of audible or speech output.

    If a separate Wi-Fi-Box, No. F1667 with integral FASSTest receiver module is used, the telemetry data can also or alternatively be transmitted to a smart-phone (Android, Apple), netbook, laptop, etc., and any monitor connected to that device.

    When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.
    The outstanding features of the receiver are its small size of just 47.3 x 24.9 x 14.3 mm and weight of only 13 g you could ever need.


    SKU: F1002
    €120.00

    LOW STOCK
  • Futaba R7003SB FASSTest HV receiver

    Compact, lightweight R7003SB 2.4 GHz FASSTest receiver with integral telemetry transmitter.

    • Smaller, only 7g, lighter 3 /18 - channel 2.4GHz FASSTest S.BUS-Receiver with full range and integrated Telemetry transmitter.
    • Ultra-slim for models with narrow fuselages.
    • With the S-BUS system for up to 18 channels, making it suitable for all models from mini-helicopters to large-scale aircraft.
    • Normal PWM-output
    • The 3 PWM-Servo channels outputs are divided in 7 groups of outputs Port 1 and 2, whereby the output allocation may be freely selected.
    • S.BUS output Up to 18 of the new, programmable S-BUS servos or peripheral devices such as gyros,
    • Flybarless systems or speed controllers can be attached in series directly to this output.
    • One feed cable for all channels.
    • No cable „spaghetti“, and reduced weight.
    • All standard servos can be connected to receivers with an S.BUS PWM adapter.
    • It does not get any simpler.
    • High Response
    • Switchable output speed of the control pulse for digital servos, 6.3 ms instead of 16 ms,
    • which leads to a still shorter reaction time.
    • Aerial Diversity
    • The 2 Aerial Diversity system continuously checks the signal level at both aerial inputs and switches over in a split second to the stronger signal with no transition period.

    Telemetry

    • S.BUS2 devices or sensors can be connected via the S.BUS2 socket, and up to 32 telemetry data sets can be transmitted.
    • The receiver‘s integral transmitter sends the telemetry data present at the S.BUS2 socket to the FASSTest transmitter, where the data are displayed on-screen or generated in audible form.
    • Alternatively, the data can be transmitted to a separate Telemetry-Box.
    • When the receiver is connected, data such as receiver battery voltage, external voltage (max. 70 V DC) and aerial signal strength, i.e. the essential telemetry data, are automatically transmitted to the ground.

    Power

    • A further voltage range from 3.7…7.4 V nominal voltage, when using 7.4 LiPo-Batteries for receiver power, all connected servos must possess the appropriate voltage capability.
    • The receiver does not feature an internal servo voltage limiter for the high voltage servo voltage.

    Recommended accessory:

    • F1001100 „Extra Voltage“ connecting lead with fuse.

    Specification:

    • Frequency band 2.4 – 2.4835 GHz
    • Spot frequencies 36
    • Channel count 18
    • Channel spacing 2048 kHz
    • Transmission system FASSTest
    • Voltage 3.7...7.4 Volt (4 - 5 Nx, 2 LiFe, 1 - 2 LiPo)
    • Current 50 mA
    • Dimensions 37.4 x 22.5 x 9.3 mm
    • Aerial length 14 cm
    • Weight approx. 7,2 g


    Set contents
    Including adapter for the „Extra Voltage“ connecting lead at Port 2.

    SKU: F1004
    €82.90
    €89.90

    LOW STOCK
  • Futaba receiver R-6008HS FASST

    Small and light 8-channel-FASST-receiver 2,4 GHz with full range capability, for models with compact fuselages.

    The R 6008HS receiver has a switch to select between Digital and Analogue servos. The signal pulse for digital servos on servo outputs 1-6 is even faster, which can give an even shorter latency time.
    Fitted with Dual Antenna Diversity System

    The new receiver is the same size/weight as the old one. However it does have two modes of operation. The “normal mode” is the same mode that the R608FS had. However the HS “high speed” mode improves the frame rate on channels 1-6 to only 7ms (normal mode is 14ms).

    When in the HS mode you MUST use digital servos on these six channels, this includes the BLS line. Gyros, brushless ESCs will also work on these channels. Channels 7 and 8 remain able to work with any servos at 14ms.

    Modes are changed at the receiver using the EasyLink  button. Nothing has to be done at the transmitter.

    • Channel spacing: 8.00   
    • Weight: 14 g
    • Channel spacing: 2048 kHz   
    • Dimensions: 47 x 25 x 14,3 mm
    • Voltage: 4,8-6 Volts   
    • current: 50 mA


    SKU: RobbeF1058
    €129.00

    LOW STOCK
  • Futaba receiver R617FS 2,4 GHz FASST

    Ultra-small, lightweight seven-channel 2.4 GHz FASST receiver with full range.

    Diversity system constantly checks the signal level of both aerial inputs, and instantly switches to the stronger signal, with no interruption.

    "Pre-Vision": FASST receivers constantly scan the input signal, while special software technology automatically corrects any data errors which occur.
    Easy Link - simple "binding"
    The transmitter sends an identification code with more than 130 million possible combinations; this is stored in the receiver. The receiver only accepts signals from this one transmitter, regardless of other transmitters which log onto the 2.4 GHz band.

    Voltage: 4,8-6 Volts
    Channel spacing: 2048 kHz
    Weight: 9 g

    SKU: F0967
    €78.00

    IN STOCK 48H
  • Jeti Duplex 2,4 GHz Receiver R6

    Receiver DUPLEX R6 is designed for operation in small and middle model, Receiver contains usual JR connectors for servos and one JR connector for telemetry. Power supply is possible to connect to any connector for servos.

    Parameters:

    • Dimensions [mm]   45 x 24 x 12,5
    • Weight [g]   11
    • Antenna Length [mm]   2 x 100
    • # of Channel Outputs   6
    • Temperature Range min.[°C]   -10
    • Temperature Range max. [°C]   +85
    • Supply Voltage min. [V]   3,2
    • Supply Voltage max. [V]   8,4
    • Average Current [mA]   40
    • Real Time Transmission of Telemetric Data
    • Programming   JETIBOX
    • Satellite receiver support   ×
    • Power Output [dBm]   20
    • Receiver Sensitivity [dBm]   -100
    SKU: JDEX-R6
    €67.90

    LOW STOCK
  • Jeti Duplex 2,4 R6 GHz Receiver Indoor

    Receiver DUPLEX R6 indoor is designed for operation in small model, mainly for indoor using. Receiver contains usual JR connectors for servos and one JR connector for telemetry. Power supply is possible to connect to any connector for servos.

    Parameters

    • Dimensions [mm]   44 x 20 x 7
    • Weight [g]   5,2
    • Antenna Length [mm]   2 x 45
    • # of Channel Outputs   5
    • Temperature Range min.[°C]   -10
    • Temperature Range max. [°C]   +85
    • Supply Voltage min. [V]   3,2
    • Supply Voltage max. [V]   8,4
    • Average Current [mA]   39
    • Satellite receiver support   ×
    • Power Output [dBm]   6
    • Receiver Sensitivity [dBm]   -98
    SKU: JDEXR6L
    €58.50

    IN STOCK 48H
  • Jeti Duplex 2.4EX R18 Receiver

     Jeti Duplex 2.4EX R18 receiver including RSat2 satellite receiver.

    Power can be supplied via the built-in MPX connector, which is compatible with the Jeti Max BEC 2, or via JR/UNI connectors. The power supply voltage required is 3.2-8.4V, but please note that this voltage is not regulated, so please ensure the input voltage is regulated appropriately according to your servo specification.

    The R18 includes a single RSAT2 satellite receiver with dual antennae, which should be operated in clone mode with the PPM output mode of the satellite set to 'DIRECT' and the PPM input mode of the R18 set to PPM Input on your chosen satellite channel.

    As with all Jeti Duplex 2.4GHz receivers, an audible alert can be configured so that the Duplex transmitter module emits an alarm, should the receiver supply voltage drop below a preset level. This is configurable by connecting the Jeti Box to the Tx module and this particular feature requires no additional sensors.

    Complete with bind-plug and MPX plug with two pieces of heatshrink.
    For a stable and reliable power source, we recommend the Max BEC range of voltage regulators. Alternatively you may wish to use two A123 LiFePO4 batteries, depending on your power requirements.

    Technical Details for Jeti Duplex 2.4EX R18 Receiver

    • Dimensions (mm)    62x38x16
    • Antennae Count    2
    • Antennae Length    400.00mm (15.75")
    • Channel Outputs    18
    • Temperature Range min. (°C)    -10
    • Jeti Box Compatible (JBC)    Yes
    • Temperature Range max. (°C)    85
    • Supply Voltage min.    3.2V
    • Supply Voltage max.    8.4V
    • Average Current (mA)    40
    • Transmission of Telemetric Data    Yes
    • Satellite receiver support    Yes
    • Power output (dBm)    20
    • Receiver Sensitivity (dBm)    -106
    • Weight    34.0g (1.2oz.)
    SKU: JDEX-R18-US
    €174.00

    LOW STOCK
  • Jeti Duplex 2.4EX R8 EPC Receiver

     8 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors or by the external MPX connector.

    The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.
    An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

    DUPLEX System EX is fully compatible with the previous version of the DUPLEX

    SKU: JDEX-R8EPC
    €87.00

    IN STOCK
  • Jeti Duplex 2.4EX R8 Receiver

    Receiver DUPLEX R8 is designed for using in middle and big models. Receiver contains usual JR connectors for servos and one JR connector for telemetry.Power supply is possible to connect to any connector for servos.

    Parameters:

    • Dimensions [mm]   50 x 30 x 12,5
    • Weight [g]   15
    • Antenna Length [mm]   2 x 200
    • # of Channel Outputs   8
    • Temperature Range min.[°C]   -10
    • Temperature Range max. [°C]   +85
    • Supply Voltage min. [V]   3,2
    • Supply Voltage max. [V]   8,4
    • Average Current [mA]   48
    • Real Time Transmission of Telemetric Data   ●
    • Programming   JETIBOX
    • Satellite receiver support   ×
    • Power Output [dBm]   20
    • Receiver Sensitivity [dBm]   -106
    SKU: JDEX-R8
    €82.90

    IN STOCK
  • Jeti Duplex 2.4EX R9 channel full-range receiver

    9 channel full-range receiver compatible with JETI EX & EX Bus protocols. Supports telemetry functions. Power supply can be provided by any of the servo JR connectors.

    The DUPLEX EX line of receivers is intended for operation with DUPLEX Tx transmitter modules in the 2,4GHz band and are fully compatible with the previous version of the DUPLEX. Thanks to the fully digital and bidirectional communication between transmitter and receiver there arise completely new aspects in the model remote control branch. One of the most important advantages is the operation without crystal, moreover the low susceptibility towards interference, the high range up to the limit of visibility and the possibility to follow anytime the onboard state of the model and its functional parts.
    An additional satellite receiver RSat2 complements the receivers R9, R10, R11, R12, R14 and R18. This receiver is a full DUPLEX system receiver offering the complete functional spectrum of the system. Instead of classical servo pulses the output of the RSat2 receiver offers a PPM signal only. This PPM signal is furtheron processed by the receivers R9, R10, R11, R12, R14, R18 or by compatible RC equipment which requires a PPM signal at the input.

    Specification

    • Weight [g]:  13
    • Dimensions [mm]: 48 x 23 x 10
    • Number of channels: 9
    • Telemetry: Yes
    • Operational temperature [°C]: -10 ... 85
    • Compatible protocols: DUPLEX 2.4GHz EX, EX Bus
    • Antenna Length [mm]: 2 x 200
    • Supply Voltage [V]: 3,2 - 8,4
    • Average Current [mA]: 30
    • Satellite receiver support: Yes
    • Output Power [dBm]: 15
    • Receiver Sensitivity [dBm]: -106
    SKU: JDEX-R9
    €87.90

    LOW STOCK
  • JETI DUPLEX 2.4EX RC Switch

    JETI DUPLEX 2.4EX RC Switch

    RCSW - RC Switch is a wireless switch designed especially for JETI model products (BEC stabilizers, Central Box and other accessories) that increase the comfort of model control. RC Switch can be easily controlled using DC/DS transmitters and it can be simply used as a replacement of the magnetic key.

    Compatible devices: SBEC 40, DPS 40, SPS 20, DSM 10, Central Box 200, Central Box 400, Master Switch etc.

    Switching is indicated by a green LED that is visible through the opening on the side of the RC Switch.

    Setting the polarity of the switch is specific for each JETI model product, in the chart below there is a list of several supported devices and their RC Switch settings for DC and DS transmitters.
    SKU: JDEX-RCSW
    €69.90

    LOW STOCK
  • Jeti Duplex EX R5L 2.4GHz Receiver

    Receiver DUPLEX R5 is designed for operation in small model. Receiver contains usual JR connectors for servos and one JR connector for telemetry. Power supply is possible to connect to any connector for servos. 


    Parameters

    • Dimensions [mm]   44 x 20 x 7
    • Weight [g]   5,2
    • Antenna Length [mm]   2 x 100
    • # of Channel Outputs   5
    • Temperature Range min.[°C]   -10
    • Temperature Range max. [°C]   +85
    • Supply Voltage min. [V]   3,2
    • Supply Voltage max. [V]   8,4
    • Average Current [mA]   39
    • Real Time Transmission of Telemetric Data   ●
    • Programming   JETIBOX
    • Satellite receiver support   ×
    • Power Output [dBm]   6
    • Receiver Sensitivity [dBm]   -98
    SKU: JDEX-R5
    €59.90

    IN STOCK 48H
English
EUR (€)
Belgium
  • Select language:
    English
    German
    English
    Spanish
    French
    Italian
    Dutch
  • Select currency:
  • Select your country: